RVS4000 remote management using SNMP not Supported over WAN

I'm trying to mange the RVS4000 router from the WAN side. I just changed the default password and in the firewall setting:
Block WAN Request is disabled.
Remote Management is enabled with the default port.
But I am not able to connect to the router remotely (using its WAN IP address). I can ping its WAN IP address fine from the remote PC. The router functions normally (i.e. PC on the LAN can connect to the Internet) but the remote management via SNMP also does not work. In most cases, the router just does not respond to the TCP SYNC or SNMP request from the WAN. Occassionally, it responds to the TCP SYNC fine but when the remote PC requests the HTTP page, it quickly responds with FIN/ACK.
In addition, I can connect to its WAN IP address from the LAN side. But it just does not work from the WAN side.
I tried disabling firewall, IPS, etc, nothing works.
Message was edited by: Steve DiStefano

Shoot, I just tried it myself.   Didnt work.   I contacted development team and they told me it wasnt speced to operate for SNMP management (port 161) over the WAN.
Remote  Mgmt on RVS4000 is limited to WebUI access on RVS4000, and SNMP is only  accessible from LAN side.
This  product did not have any requirement to be accessed from Internet using  SNMP.
Very sorry I didnt know this.   Was there a datasheet or paper that indicated this was supported I can correct to prevent this frpom happening to others like us?
You know, I was thnking that the times I used SNMP on SB Routeres was when I was VPNed into the router, then it works, since it is supported on LANB side.  is that an option for you?
Tell us about what typs of things you view walking SNMP from the NOC and we'lls ee if there are alternative ways for you to get the same data.
Steve
SE Field Channel Sales
Message was edited by: Steve DiStefano

Similar Messages

  • Exchange 2010 - WS-Management Service does not support

    Hi,
    We have a tool which was used for bulk Mailbox creation, Mailbox Movement etc. This we have used in Exchange 2007 also and was working fine. Now in Exchange 2010 we are facing some issues. Tool is written in VB.
    Exchange 2010 SP2 is running in all servers and we have 2 Mailbox Servers in DAG and 2 HUBCAS in CAS Array/NLB.
    When Team is trying to fetch the DB details in exchange 2010 through tool they are not able to connect and getting error as
    "Connecting to remote Server failed with the following error message. The WS-Management Service does not support the request."
    I have checked everything from Exchange like Remorepowersell status, WinRM, WS Managemet dll location and entry in config file everthing seems to be fine.
    I checked through EMTShooter tool also and no issues reported and connection was success through EMTShooter.
    Pls suggest if anymore we can check to fix the problem.
    Note: everything is working frine from Powershell and Exchange Management console.
    Regards:Mahesh

    Hi
    Yes, i got it confirmed and coding team claims that no issue with code and its working in some other setup.
    <v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f"><v:stroke joinstyle="miter"><v:formulas><v:f
    eqn="if lineDrawn pixelLineWidth 0"><v:f eqn="sum @0 1 0"><v:f eqn="sum 0 0 @1"><v:f eqn="prod @2 1 2"><v:f eqn="prod @3 21600 pixelWidth"><v:f eqn="prod @3 21600 pixelHeight"><v:f eqn="sum @0 0 1"><v:f eqn="prod @6 1 2"><v:f eqn="prod @7 21600 pixelWidth">Below
    is the snapshot of error with coding <v:f eqn="sum @8 21600 0">
      <v:f eqn="prod @7 21600 pixelHeight">
      <v:f eqn="sum @10 21600 0">
     </v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
     <v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
     <o:lock aspectratio="t" v:ext="edit">
    </o:lock></v:path></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:631.5pt;height:148.5pt;" type="#_x0000_t75">
    <v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\aralele\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
    </v:imagedata></v:shape>
    Regards:Mahesh

  • Remote Management service does not start

    Has Novell got a fix for the issue where the Remote Management services
    fails to start automatically on XP workstations? As we upgrade our clients
    to XP, this has become a major headache. The service can be started
    manually, and then the Remote Control feature of ZFD will work, providing
    the firewall is disabled.

    Workaround is to create a batch file and put in the command:
    net start "remote management"
    Create a shortcut to this batch file and put it in the startup group of
    All Users in the "document and settings".
    Phong Nguyen
    > Novell Client 4.91 will not include any of ZFD 3.x services so you'll
    need
    > to upgrade to 4 or preferrably ZDM 6.5. This weekend I kicked off a
    ZFD 3.2
    > SP3 to 6.5 SP1 migration. Even without the extra services its worth it
    just
    > from a support stand point.
    >
    > Do the details posted in this thread help any?...
    >
    > Newsgroups: novell.support.zenworks.desktops.3x.remote-control
    > Subject: ZfD3.2, NetWare 6.0, XPsp2, will it work?
    > Message-ID: <azXhd.717$[email protected]>
    > Date: Wed, 03 Nov 2004 02:41:10 GMT
    >
    > 1. Set Windows Firewall/ICS service to manual
    > 2. Set Windows Firewall/ICS service to start before Remote Management
    (ie.
    > Remote Management service depends on Firewall/ICS and Workstation
    Manager
    > services)
    > 3. Configure Windows Firewall exceptions for wuser32.exe, open ports
    1761 -
    > 1763 (you need others depends on the services you use, see TID below)
    >
    > What Ports are used by ZENworks Remote Management Agent?
    > http://support.novell.com/cgi-bin/se...?/10054960.htm
    >
    > Support for Windows XP SP2 on ZENworks for Desktops
    > http://support.novell.com/cgi-bin/se...?/10092958.htm
    >
    > --
    > Tony Pedretti
    >
    >

  • [unixODBC][Driver Manager]Driver does not support this function {IM001}

    Hello,
    I start from the end and details show below - this error message i got in sql session:
    SQL> select count(*) from EnergyType@ENERGOPLAN;
    select count(*) from EnergyType@ENERGOPLAN
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    ORA-02063: preceding 2 lines from ENERGOPLAN
    SQL>
    First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
    If its ok and HS are licensed for SE, then please see details of my problem:
    ----OS and packages version
    [oracle@aris_sv_db log]$ uname -a
    Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ rpm -qa | grep odbc
    [oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
    [oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
    unixODBC-libs-2.2.11-10.el5
    unixODBC-libs-2.2.11-10.el5
    unixODBC-devel-2.2.11-10.el5
    unixODBC-2.2.11-10.el5
    unixODBC-devel-2.2.11-10.el5
    [oracle@aris_sv_db log]$ rpm -qa | grep freetds
    freetds-0.91-1.el5.rf
    [oracle@aris_sv_db log]$
    -----ODBC.INI, ODBCINST.INI and FREETDS.CONF
    [oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
    [ENERGOPLAN]
    Driver = FreeTDS
    Servername = ENERGOPLAN
    Database = ess2
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ more /etc/odbcinst.ini
    # Example driver definitions
    [FreeTDS]
    Description = MSSQL Driver
    Driver = /usr/lib64/libtdsodbc.so.0
    #Setup = /usr/lib64/libtdsodbc.so.0
    #Driver = /usr/lib64/libodbc.so
    #Driver = /usr/lib/libodbc.so
    UsageCount = 1
    Trace = Yes
    TraceFile = /tmp/freetds.log
    [ODBC]
    DEBUG = 1
    TraceFile = /tmp/sqltrace.log
    Trace = Yes
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ more /etc/freetds.conf
    # A typical Microsoft server
    [ENERGOPLAN]
    host = 192.168.10.64
    port = 1433
    tds version = 8.0
    # client charset = UTF-8
    client charset = cp1251
    [oracle@aris_sv_db log]$
    ----CHECK CONNECT from ODBC
    [oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
    | Connected! |
    | |
    | sql-statement |
    | help [tablename] |
    | quit |
    | |
    SQL> select count(*) from EnergyType;
    | |
    | 8 |
    SQLRowCount returns 1
    1 rows fetched
    SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
    locale is "en_US.UTF-8"
    locale charset is "UTF-8"
    using default charset "cp1251"
    1> select count(*) from EnergyType;
    2> go
    8
    (1 row affected)
    1> [oracle@aris_sv_db log]$
    ----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    SID_LIST_ENERGOPLAN =
    (SID_LIST =
    (SID_DESC=
    (SID_NAME=ENERGOPLAN)
    (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM=dg4odbc)
    (ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
    ENERGOPLAN =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
    ADR_BASE_LISTENER = /u01/app/oracle
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    ENERGOPLAN =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
    (CONNECT_DATA=(SID=ENERGOPLAN))
    (HS=OK)
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
    # This is a sample agent init file that contains the HS parameters that are
    # needed for the Database Gateway for ODBC
    # HS init parameters
    HS_FDS_CONNECT_INFO = ENERGOPLAN
    #HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
    HS_FDS_TRACE_LEVEL = DEBUG
    #HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
    HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
    HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
    #HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
    #HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
    #HS_LANGUAGE=american_america.we8iso8859p1
    #HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
    #HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
    #HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
    #HS_LANGUAGE=Russian_CIS.AL32UTF-8
    #HS_FDS_FETCH_ROWS=1
    HS_NLS_NCHAR = UCS2
    HS_FDS_SQLLEN_INTERPRETATION=32
    # ODBC specific environment variables
    set ODBCINI=/home/oracle/.odbc.ini
    set ODBCINSTINI=/etc/odbcinst.ini
    #HS_KEEP_REMOTE_COLUMN_SIZE=ALL
    #HS_NLS_LENGTH_SEMANTICS=CHAR
    #HS_FDS_SUPPORT_STATISTICS=FALSE
    # Environment variables required for the non-Oracle system
    #set <envvar>=<value>
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ tnsping ENERGOPLAN
    TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
    Copyright (c) 1997, 2011, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
    OK (0 msec)
    [oracle@aris_sv_db log]$
    ----CREATE DBLINK and test from sqlplus
    CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
    [oracle@aris_sv_db log]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
    SQL> select count(*) from EnergyType@ENERGOPLAN;
    select count(*) from EnergyType@ENERGOPLAN
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    ORA-02063: preceding 2 lines from ENERGOPLAN
    SQL>
    ----logs from hs and odbc
    [oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
    12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
    3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
    -7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
    Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
    Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
    Free hoada @ 0x14e5fd20
    Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
    Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
    type:0
    SQL text from hgopars, id=1, len=36 ...
    00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
    10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
    20: 22204131 [" A1]
    Exiting hgopars, rc=0 at 2013/04/01-16:30:42
    Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
    hgoopen, line 87: NO hoada to print
    Deferred open until first fetch.
    Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
    Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
    Allocate hoada @ 0x14e5fd80
    Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
    Entered hgopcda at 2013/04/01-16:30:42
    Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
    Entered hgopoer at 2013/04/01-16:30:42
    hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
    hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
    Free hoada @ 0x14e5fd80
    hgodscr, line 464: NO hoada to print
    Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
    Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
    Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
    Entered hgocomm at 2013/04/01-16:31:24
    keepinfo:0, tflag:1
    00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
    10: 32322E37 363237 [22.7627]
    tbid (len 20) is ...
    00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
    10: 312E345D [1.4]]
    cmt(0):
    Entered hgocpctx at 2013/04/01-16:31:24
    Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
    Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
    Entered hgolgof at 2013/04/01-16:31:24
    tflag:1
    Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
    Entered hgoexit at 2013/04/01-16:31:24
    Exiting hgoexit, rc=0
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
    Native = 0x7fff6ca974f4
    Message Text = 0x14e5f968
    Buffer Length = 510
    Text Len Ptr = 0x7fff6ca97750
    [ODBC][12117][SQLGetDiagRecW.c][582]
    Exit:[SQL_SUCCESS]
    SQLState = IM001
    Native = 0x7fff6ca974f4 -> 0
    Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
    [ODBC][12117][SQLGetDiagRecW.c][540]
    Entry:
    Statement = 0x14e399f0
    Rec Number = 2
    SQLState = 0x7fff6ca97700
    Native = 0x7fff6ca974f4
    Message Text = 0x14e5f908
    Buffer Length = 510
    Text Len Ptr = 0x7fff6ca97750
    [ODBC][12117][SQLGetDiagRecW.c][582]
    Exit:[SQL_NO_DATA]
    [ODBC][12117][SQLEndTran.c][315]
    Entry:
    Connection = 0x14dbd4b0
    Completion Type = 0
    [ODBC][12117][SQLGetInfo.c][214]
    Entry:
    Connection = 0x14dbd4b0
    Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
    Info Value = 0x7fff6ca9781e
    Buffer Length = 8
    StrLen = 0x7fff6ca9781c
    [ODBC][12117][SQLGetInfo.c][528]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLEndTran.c][488]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLDisconnect.c][204]
    Entry:
    Connection = 0x14dbd4b0
    [ODBC][12117][SQLDisconnect.c][341]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLFreeHandle.c][268]
    Entry:
    Handle Type = 2
    Input Handle = 0x14dbd4b0
    [ODBC][12117][SQLFreeHandle.c][317]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLFreeHandle.c][203]
    Entry:
    Handle Type = 1
    Input Handle = 0x14dbb0c0
    [oracle@aris_sv_db log]$

    To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
    - Klaus

  • [ODBC Driver Manager] Driver does not support this function

    HI every body
    In Win Server 2008 R2 , I tried to retrieve data from my ODBC Driver
     by Report Builder , my connection test is successful , but after any retrieve data by SQL Statement I encounter with this Error :
    IM0001: [Microsoft] [ODBC Driver Manager] Driver does not support this function
    I use Win Server 2008 R2 , and my ODBC Driver installed on :
    %SystemRoot%\SysWOW64\odbcad32.exe
    Can anyone help me to solve this problem, its realy urgent for me ,
    PLEASE HELP ………………..

    ODBC Driver name is PMSDK (32 bit) and installed by Primavera software
    I use SQL Report Builder to connect the driver and try SQL Statement in it
    Report Builder may be executing an ODBC function to retrieve meta data, and that function is not supported by the PMSDK driver.  Are you using the latest version of the PMSDK driver?  You might try turning on ODBC tracing to find out the problem
    function. 
    Dan Guzman, SQL Server MVP, http://www.dbdelta.com

  • The technology or driver used does not support reverse engineering MySQL

    Hi all,
    I have a little problem.
    When I am trying create a mode in Designerl based on a MySQL Data Store that is created in the Topology manager, I get an exception stating;
    "The technology or driver used does not support reverse engineering
    java.lang.NullPointerException
         at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
         at com.sunopsis.dwg.reverse.Reverse.setMetaData(Reverse.java)
         at com.sunopsis.graphical.frame.b.ip.a(ip.java)
         at com.sunopsis.graphical.frame.b.ip.a(ip.java)
         at com.sunopsis.graphical.frame.b.hq.b(hq.java)
         at com.sunopsis.graphical.tools.utils.swingworker.v.call(v.java)
         at edu.emory.mathcs.backport.java.util.concurrent.FutureTask.run(FutureTask.java:176)
         at com.sunopsis.graphical.tools.utils.swingworker.l.run(l.java)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:665)
         at edu.emory.mathcs.backport.java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:690)
         at java.lang.Thread.run(Unknown Source)"
    I can see the table I want to reverse from when going into the the tab "Selective Reverse" but it the reverse fails with the error message above.
    I would really appreciate any help on this topic. I am using MYSQL Server 5.1 and ODI 10.1.3.5.
    Thanks in advance
    Peter

    Hello,
    it seems to be working now. The only change I did was to increase the java heap size, but it feels a bit strange that it should have anything to do with the problem in question.
    Anyway thanks very much for your help.
    Best Regards
    Peter

  • I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."

    When I log in I get this message I keep getting the following error message---"We're sorry but the Safari browser version you are currently using does not support the community toolbar."
    Also, I can seem to down load my Adobe Flash, I did download what I thought was the correct down load for Safari, but I'm still getting this message "We're sorry but the Safari browser version you are currently using does not support the community toolbar."  I was even going to purchase the Leopard for 29.99 to see would this solve my problem but I want to purchase another pc and sale this one, can you help me?
    Thank you

    See this link.
    Also look at More Like This on the right side of these pages for realted threads on this topic (and on the pages those link to).

  • I keep getting an error message that says the safari browser version you are currently using does not support the community toolbar.  how do I fix it?

    Everytime I open my imac I get an error message that says: "We're sorry but the Safari browser version your are currently using does not support the community toolbar."  I can't see where it affects anything else, but getting an error message on an imac, just doesn't seem right, ya know?  How can I get rid of the message. 

    Apparently an add-on named Community Toolbar was installed at one time, and is causing the problem. To get rid of it, quit Safari, then throw away these files -
    Macintosh HD/Library/Application Support/Conduit
    Macintosh HD/Library/InputManagers/CTLoader
    Macintosh HD/Library/Receipts/ctloader.pkg
    Macintosh HD/Library/Receipts/<Toolbar name>.pkg
    Macintosh HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    Macintosh HD/Users/<User name>/Library/Application Support/Conduit
    Note - if you are using Lion, the Library folder in your home folder (user name folder) is hidden. To get into it, in Finder open the Go menu; with that menu open, press and hold the Option key. An item "Library" will be added to the list, and can then be selected. That will open the Library folder in your home folder.

  • JavaScript required. The browser that you are using does not support JavaSc

    I keep on getting this message when I'm trying to log on to Hotmail
    JavaScript required. The browser that you are using does not support JavaScript, or you may have disabled JavaScript
    And my browser (IE 6) cannot go to any java links. They either don't load or they are blank pages. I tried installing java, enabling them on the internet options, and even installed a new browser it is still the same thing!!!
    I'm very pissed right now but I really really need some help. Sorry for the inconvenience.
    Thank you, Zaragon

    JavaScript is different from Java. Somehow, security has gotten turn on in IE. If you go to tools, internet options, security, then look at Internet (for hotmail anyway), hit the custom level button, you will see that scripting has been disabled.

  • Why when i click to open safari does it keep telling me the safari browser version i am using does not support the community toolbar ?

    Why when I am clicking into safari does a message appear telling me that the Safari Browser version I am using does not support the community toolbar ???

    You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
    If the instructions don't work, proceed as follows.
    Triple-click the line below to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
    Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with this line:
    /Applications/Toolbars
    Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.
    I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

  • I get a message that says "Safari browserversionyou are currently using does not support the community toolbar

    I get an annoying message everytime I open Safari. It reads - "Safari browser version you are currenty using does not support the commuinty toolbar" How do I get rid of this

    victoria Hamlin wrote:
    it didn't... but at least I know where to find the Library-  any other ideas?
    Instead of being installed as a standard plug-in, the Community Toolbar uses the system loader "launchd" to load the plugin on-demand whenever Safari is opened. You will need to remove three components that are installed, starting with the binary files.
    The binary file is the actual toolbar application, and is located in the /Library/InputManagers/CTLoader/ folder. Removing the entire CTLoader folder will remove the application and other files that are installed along with the toolbar. If you just care to quickly stop the toolbar from loading, doing this will be enough to keep it from loading.
    With the binary file removed, the toolbar will no longer launch; however, the system will still try to load it when Safari is opened because the system launcher instructions file is still installed. While having these instructions present will not cause a decrease in performance, removing them will prevent the system from outputting errors and warnings in the system log files.
    Removing only this instructions file is another way to stop the toolbar from loading; however, it will require either the use of the following command in the Terminal (done before removing the file) or a restart of the system after removing the file to unload the instructions from the system loader and prevent the toolbar from launching.
    sudo launchctl unload /Library/LaunchAgents/com.conduit.loader.agent.plist
    The final components to the toolbar are some resources that it uses, which are relatively benign and will become unused "orphaned" files when the other components of the toolbar are removed. These files are all located in the /Macintosh HD/Library/Application Support/ folder in a directory called Conduit. Remove this directory and the toolbar in its entirety will be removed.

  • When I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar.  How do i get rid of this

    when I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar.  How do i get rid of this?

    Carolyn Samit has answered this question before.  I did it with this info.  Thank you Carolyn for your awesome help.

  • The Safari browser version you are currently using does not support the community toolbar.

    the Safari browser version i am currently using does not support the community toolbar. And Iam using googel chrome now but not happy about this problem .
    I would like to fixe it .
    Many thanks

    never mind.. I got rid of it already!

  • Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

    Every time I open Safari, I get a message (and a pop-up) that says the Safari browser I'm using does not support Community Toolbar. How can I get rid of the Community Toolbar or at least turn it off?

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • Secure zone - ERROR: The payment gateway that you are using does not support recurring payments

    So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
    The only way I have found is to sell membership to a secure area where the files are linked.
    When I create the secure zone, I want a one-time-fee, but the system says:
    "ERROR: The payment gateway that you are using does not support recurring payments"
    The payment isn't recurring!
    Micah

    "Note that you have to use seamless gateway to process such payments."
    Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error.  Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
    Micah

Maybe you are looking for