RVS4000 v2 when VLAN used Vista computers can't get a DHCP address.
Just bought a RVS4000 v2. Firmware v2.0.0.0.3. All worked fine when using factory default settings. But I bought this because I wanted to implement VLANs. I defined VLAN2 for the VOIP phones connected through a switch to Port 1. I also defined VLAN3 for my accounts computers, whose switch connects to port 3. All VLANs are defined by Port, untagged.
The phones, using Linux, pick up an IP address fine. So do the two remaining W2K systems. XP systems do but rather slowly. Vista though just hangs for a while, then uses an autoconfiguration address and won't connect unless I spoecify the IP settings. However if I connect the same Vista system to a port which uses the default LAN, it gets an IP address fine. I haven't tested Win7 yet.
Why? Is this a bug in the firmware, or just a bug in Vista?
May be a bug. A Wireshark trace might be illuminating.
Similar Messages
-
Slingbox Pro can't get a DHCP address from my WRT310N router
Reset my Slingbox and on my router Dhcp table I see a dhcp address for 58 seconds but the slingbox network light keeps flashing. Then the address disappears and the slingbox network light continues to flash. Have tried changing the router, same issue.
You can try this link and follow the steps, i think it will help you in fixing your problem.
If possible connect a different Cat5 Cable from your Router to the Slingbox. -
Just installed Lion (10.7.3) , but when i use "find" it can't find any files
Just installed Lion (10.7.3) , but when i use "find" it can't find any files, comes with with "filename contains" but then when you press enter nothing happens.
Hi..
Open System Preferences > Security & Privacy > Firewall
Make sure the Firewall is turned off. You may need to click the gold lock icon to make changes.
Using FaceTime behind a firewall
Apple - Support - FaceTime -
I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.
Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.
-
Used CS6 for a year or more, now says it's not registered! I have 1 or 2 unused keys but do not want to use them. Can't get the CS6 applications to open to enter the codes I was given when I first registered them...
You'll need to use web chat. This file shows you links to Web Chat:
Adobe ID, sign in, and account help -
I have a MacBook that's four years old, runs on iOSX 10.7.5 but of late has been hanging, especially when I use Safari. Can anyone help?
Carolyn,
I searched my whole system and couldn't find
com.apple.systemuiser.plist
So that is a mystery. However the part about:
Go back to System Preferences > Network
Make sure the box is selected next to: Show Wi-Fi status i menu bar. Solved the problem. Somehow the box had been unchecked. Gremlins I guess!
Thanks so much for your help.
L. -
Hi, I have an iPhone 4 which rings people when it is locked, whether or not in my pocket. I always lock it when not using it. Can anyone help? It is calling random numbers, not the last person or anyone even recently called on my recents list. Thanks
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
Satellite Pro 4600: When I use WEP, I can't make any connection anymore
Hey everybody,
When I connect my Tohsiba Satellite Pro 4600 via the build-in wireless network card without WEP to an AP, there is no problem, connection is establische and everything is working fine.
When I use WEP, I can't make any connection anymore.
Is there a solution to use 128 Bit WEP encryption on a Thosiba Pro 4600 laptop with the build-in WLAN.
Thanks in advanced
PokettukWhat WLan card do you use?
As far as I know the notebook should be equipped with the Wireless LAN / WiFi Standard: 802.11b ORiNOCO Mini PCI card.
This card supports security 64 WEP or 128 RC4.
Everything looks like you WLan card doesnt support the same security standard like your WLan router. You should understand that this WLan card is an oldie about 7 years old.
I think the best solution is to use the external USB WLan stick which would support the newest encryption standards
Bye -
My iPhone 5 its running IOS6.4 and just work with wifi, when I use 3G I can't send or receive any data
Try resetting all network settings, or turn the airplane mode on then off, or restarting the device itself
if all else fails, do a restore (Back-up everything before doing this)
if it still fails, contact apple or your wireless carrier. -
When bookmarking a page, I can't get the complete list of bookmark folders to drop down in order to select any folder in which to bookmark page. The 'Folder:' bar has 'Bookmarks Menu' showing. The arrow on the bar drops down 5 recent folders to which pages have been saved, but the pop down arrow to the right of the bar just opens to show the three categories and 'New Folder' button. What do you set to get whole list of folders in Bookmarks to drop down?
To all, embarrassingly enough, I have discovered that I didn't know how to expand the three categories including 'Bookmarks Menu' in the 'Bookmark This Page' pop up interface. It was expanded by default on the initial Firefox opening and first page bookmark attempt. Next use it only showed categories. I clicked and double clicked the 'Bookmarks Menu' line, but failed to see the small, shaded triangle used to expand/collapse list. If it appears collapsed, just tap triangle at left of line to see all folders. It seems to open the same way after I do it for first time. Sorry for the inconvenience, and thanks for all the attempts to help.
-
I have ePub documents that won't open using iBooks, how can i get them formatted so that I can use them
You could try downloading a program called Calibre. It is very good at converting files between formats. I use it all the time to convert PDF's from work to read on iTunes when I don't want to have to keep zooming in and out to read the actual text.
I know that iBooks will read PDF's but they can get pretty squashed down some times. Especially if the original font was small to begin with. So I run them through Calibre and then email them to my phone and open them in iBooks. -
I'm trying to export my Aperture masters to use in Lightroom, can't get the ratings to export. Tried writing the IPTC data to the masters and adding the IPTC4XMP file when exporting, neither worked. The ratings show up in Lightroom if I export the versions. These are all .jpg's that I am exporting. Any ideas on how to fix this?
ThanksThere are two problems here:
1) Aperture does not modify its "original" files on export. Meaning with the JPEG files that Aperture will NOT modify them, and it will not write IPTC data to them. It exports the XMP sidecar files, as you're seeing.
2) Adobe will NOT read IPTC sidecar files for non-RAW images. So if it sees a JPEG file, it will not look for an XMP sidecar file. It just doesn't read them, so the data won't be imported by Lightroom.
If you are using JPEG files, then probably the solution is to check the box in Aperture to tell it to write XMP metadata to the original files. They're not RAW files, so they're not proprietary in any way, so writing the XMP metadata to the JPEG files is probably pretty safe. -
Whenever I switch from My Music to iTunes Store and then back to My Music, it sends me to the top of My Music instead of where I was when I switched. How can I get it to return to where I was when I switch out of and back into My Music instead of going back to the top?
Firefox will reload a page and reposition at the top if the copy in the cache has expired. However, that shouldn't happen right away.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help? -
I recently upgraded my internet service with Comcast for faster internet. When I use an ethernet connection I get 50 MB download speed....when I use the wireless connection I get 10-20 MB speed. I have an airport extreme...3-4 years old. Why is the speed so different and are there settings I can change to increase the wireless speed?
If your supposed to be getting 20 Mb/s down via your ISP and both Mac's are not getting that on the SpeedTest, then obviously your router appears to be the cause.
Connect one Mac directly to the ISP's modem, power off/wait 30 seconds/then power on, then power on the Mac. The ISP will connect directly to the Mac, then run a SpeedTest.
Then repeat the same for the other Mac. If both Mac's have a problem then it's possibly the ISP, the modem, your lines to them or on your property, or both Mac's are messed up.
You'll have to keep searching for the cause. Call your ISP and ask then to run a test to see if your getting your 20 Mb/s to your modem, that should clear part of the problem.
Diagnosing network issues -
please help me!!!! my macbook pro 15 running on mountain lion is hanging a lot...sometimes when i use any app than it get freeze for some seconds...what should i do?
Hardware Information:
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
System Software:
OS X 10.8.2 (12C60) - Uptime: 0 days 1:17
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (424.92 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.coresymbolicationd.plist
Problem System Launch Agents:
[failed] com.apple.afpstat.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.rcd.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.google.keystone.agent.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.facebook.videochat.Akshay.plist
[loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
User Login Items:
Sony Ericsson Bridge Helper
BitTorrent
uTorrent
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
Picasa.plugin
Bad Fonts:
None
Top Processes:
14.6 % WindowServer
6.9 % coreaudiod
6.4 % uTorrent
1.9 % WebProcess
1.4 % iTunes
1.2 % EtreCheck
0.5 % fontd
0.2 % NotificationCenter
0.1 % Dock
0.0 % Microsoft
Maybe you are looking for
-
"Attempt to open workbook failed" error while opening Discoverer report
Discoverer is opening and connecting but its throwing an error "Attempt to open Workbook failed". same report is opening If I call from a .bat file. Only problem is coming when I call from from using host command. Please do help me on this as its ver
-
Hi, The "Recovered Adapter Audit Log" in Message Display Tool, seems to display logs only for the current day. Is there any setting that can be done, for it to display the logs of messages for the last 4 weeks or so? If not,where else can I get an ad
-
Events which cross midnight from one day to the next are not shown on the second day. It used to work with the previous versions...??
-
TO DOWNLOAD SMARTFORMS (VER 4.6C)
hi, is there any option to download smartforms and sapscripts in 4.6 c version.is there any standard programs available to download it. helpfull answers will be rewarded. regards, murali.
-
After installing Firefox 16.0.1, I always get a warning whenever I close multiple tabs, even though there is no check mark against the option, "Warn me when closing multiple tabs".