RVTSH-189: Subroutine rvtshiline() returned error

HI everyone,
Iam trying to import reciept data from RCV_HEADERS_INTERFACE AND RCV_TRANSACTIONS_INTERFACE to base tables.
But when iam running the concurrent program receiving transaction processor, it is completing successfully. But in the PO_INTERFACE_ERRORS iam getting the below error.
RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator for
Any help regarding above would be helpful to me.
PS:I have seen threads regarding this error but iam unable to find solution.

HI sandeep..
My problem has been solved. During inserting into RCV_TRANSACTIONS_INTERFACE, I haven't inserted the VALIDATION_FLAG column. After inserting the column the base tables are populated.
Thank you
with regards
vijay
Edited by: vi**** on Sep 14, 2011 11:11 PM

Similar Messages

Error RVTSH-189: Subroutine rvtshiline() returned error

Hi All,
I am new using OM, using R12
I am inserting record into rcv_headers_interface and rcv_transactions_interface and then running the Receiving Transaction Processor, i am getting the following error.
Error RVTSH-189: Subroutine rvtshiline() returned error
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
to_organization_id,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
comments,
org_id
VALUES
(rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
-1,
SYSDATE,
-1,
'RECIEVE',
'BATCH',
'PENDING',
20,--quantity
83,
'VENDOR',
301,--po_header_id
321,--po_line_id
321,--po_line_location_id
301,--po_distribution_id
'TEST',
83);
update rcv_transactions_interface
set processing_mode_code = 'BATCH',
processing_status_code = 'PENDING',
processing_request_id = null,
transaction_status_code = 'PENDING',
transaction_type = 'RECEIVE',
source_document_code = 'INVENTORY',
destination_type_code = 'INVENTORY',
AUTO_TRANSACT_CODE = 'DELIVER',
RECEIPT_SOURCE_CODE = 'INVENTORY',
CHARGE_ACCOUNT_ID = 4037,
UNIT_OF_MEASURE = 'Each',
quantity =20
am i missing some column that needs to be entered or updated?
Any help on this would be appreciated.
Regards

Pl see if these MOS Docs can help
1080050.6 - GET ERRORS RVTSH-140 RVTSH-189 when run Receiving Transaction Processor
121907.1 - RVCTP: RVTSH-140 RVTSH-189 SUBROUTINE RVTSHILINE RETURNED ERROR
369258.1 - Receipts Failing with RVTS-189 for Receiving Open Interface Transaction
HTH
Srini

RVTBM-120: Subroutine rvtptcontrol() returned error

Getting this Error : RVTBM-120: Subroutine rvtptcontrol() returned error
Please find the log file:
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
Current system time is 01-NOV-2010 17:20:04
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,IMMEDIATE,203844,
Action: Note both this error number and the actions you are trying to perform. Contact your system ad
RVTBM-008: Subroutine rvtbm_immediate_mngr() returned error
Cause: Subroutine rvtbm_immediate_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your syste
RVTBM-120: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Current system time is 01-NOV-2010 17:20:06
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Please Suggest...

Getting this Error : RVTBM-120: Subroutine rvtptcontrol() returned error
Please find the log file:
Purchasing: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
Current system time is 01-NOV-2010 17:20:04
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,IMMEDIATE,203844,
Action: Note both this error number and the actions you are trying to perform. Contact your system ad
RVTBM-008: Subroutine rvtbm_immediate_mngr() returned error
Cause: Subroutine rvtbm_immediate_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your syste
RVTBM-120: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Current system time is 01-NOV-2010 17:20:06
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Please Suggest...

- RVTII-060: Subroutine inltpu() returned error - RVTII-060: Subroutine in

Hi,
I am getting " - RVTII-060: Subroutine inltpu() returned error - RVTII-060: Subroutine inltpu() returned error " error while processing receiving transaction.
Can you please help
Savita

Some receiving txn errors can be fixed by bouncing the Receiving Transaction processor and if that does not work, by bouncing the d/b.

Returning Errors from a webservice using XMLBeans

I have a webservice that accepts XML as input and output parameters, and I'm using XMLBeans to handle this. I'm trying to work out how I can return error information from the webservice, so I created an Exception.xsd schema and 'include' it in the output XML Schema, so an exception xml element is valid in the output schema. The problem is, the XMLBean class generated from the output XML schema has no methods that allow me to create an Exception element. Is there some other way of handling the return of exceptions from webservices using XML?

The answer is just throw a SoapFaultException and put the exception.xsd XMLBean in the FaultDetail section of the SoapFaultException.

Bug Report - DB toolkit returns error when calling the DefaultDatabase property with SQLite

There's an old bug in the DB toolkit where calling the DefaultDatabase property returns error -2147217887 if you're using certain DBs (such as SQLite or PostgreSQL and I believe MySQL as well).
The problem is that this property is called by a VI which is used in some of the commonly used VIs (such as the insert VI),
causing them to fail. Whoever wrote the code was aware of this issue,
since they added a comment about it, as you can see below.
The immediate fix for this is pretty easy - add code to ignore the error or don't call the property at all. It's not used anywhere in the toolkit and unless you're using the VI yourself to get the property, this won't break any code. The problem with this is that you need to do this in every PC.
NI already has a CAR for this (CAR 232063) and should hopefully fix it, so there's no need to take further action at the moment. This post is for people searching for this in the future.
Try to take over the world!

Interesting. I have seen this before but it returned a different error code. (Error -2147352567)
=====================
LabVIEW 2012

After upgrading to Lion the bookmarks in Preview returns error message.

After upgrading to Lion the bookmarks in Preview returns error message : The File "****" couldn't be opened because you don't have permission to view it. To change the perimssion, select the item in finder and Choose File info. I have bookmarked plenty of files in Preview. How to overcome this error message???

Doesn't work Steve. I think it is an issue with Preview being sandboxed (check the sandbox column in Activity Monitor: Preview = Yes). Sandboxed apps restrict file access to those the user has explicitly selected. My theory is that this causes the unfortunate side effect of bookmarked or linked PDFs not working. A simple test: open a file with bookmarks, manually open the bookmarked file and then select the bookmark in the first file - it should open with no complaints about permissions (which leads to a weak workaround: open all the PDFs you intend to work with!).

SSRS expression returns #error value in some cells

Hello,
What do you think below expression sometimes return #error value in ssrs.
=SUM(Fields!X.Value / 100 * DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)) /
IIF( SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)) = 0
,nothing
,SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value))

Hi,
Use below expression to overcome the issue:
=
IIF( SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)) = 0
, 0
, SUM( Fields!X.Value / 100
* DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)
SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value))
Thanks, Madhu
Hi madhu,
I have value for Month field as 0. I have used MonthName function in the report. So im getting error as #Error
Expression:
MONTHNAME(Fields!Month.Value)& " "& Fields!Day.Value &" "& Fields!Year.Value
Please help me to resolve the issue.
Thanks in Advance..
Regards,
LuckyAbdul

Package Returning Error ORA-06502: PL/SQL: numeric or value error

Hi,
I create a package to export to spread sheet .xls, The package work for simple query if i pass the query to package.
There is no error in package please create the package and do the following as mentioned below
create or replace
PACKAGE export_pkg_spread_sheet
AS
procedure download_excel(vsql in clob );
PROCEDURE excel_header(p_header in out nocopy clob);
procedure excel_content(p_content in out nocopy clob,
vsql in clob );
procedure excel_footer(p_footer in out nocopy clob);
procedure get_usable_sql (p_sql_in IN clob,
p_sql_out OUT clob);
END export_pkg_spread_sheet;
create or replace
PACKAGE body export_pkg_spread_sheet
AS
PROCEDURE excel_header (p_header IN OUT nocopy CLOB)
AS
BEGIN
p_header := '<html><body>';
END;
procedure download_excel( vsql in clob )
as
p_header clob;
p_footer clob;
p_content clob;
begin
owa_util.mime_header( 'application/octet', FALSE );
htp.p('Content-Disposition: attachment; filename="report.xls"');
owa_util.http_header_close;
excel_header( p_header);
excel_content(p_content,vsql);
excel_footer(p_footer);
dbms_output.put_line(p_header ||p_content|| p_footer);
HTP.PRN( p_header ||p_content|| p_footer);
htmldb_application.g_unrecoverable_error := true;
end;
procedure excel_content(p_content in out nocopy clob,
vsql in clob)
as
p_sql_stmt clob;
cur PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
cols DBMS_SQL.DESC_TAB;
ncols PLS_INTEGER;
TYPE varColumn     IS TABLE OF varchar2(32000);
vtab varColumn;
v_column_count     NUMBER     DEFAULT 0;
v_status      INTEGER;
BEGIN
htp.prn('am here');
/* SELECT region_source into p_sql_stmt
FROM apex_application_page_regions
WHERE region_id = p_region_id AND
page_id = p_page_id AND
application_id = p_app_id; */
get_usable_sql (vsql,p_sql_stmt);
p_content := p_sql_stmt;
-- Parse the query.
DBMS_SQL.PARSE(cur, p_sql_stmt , DBMS_SQL.NATIVE);
-- Retrieve column information
DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
-- Display each of the column names
p_content := '<table> <tr>';
FOR colind IN 1 .. ncols
LOOP
p_content := p_content || '<td>' || cols(colind).col_name || '</td>';
END LOOP;
p_content := p_content || '</tr>';
vtab := varColumn(null);
for i in 1..ncols
loop
vtab.extend;
DBMS_SQL.DEFINE_COLUMN (cur, i, vtab(i), 2000);
--dbms_output.put_line(vtab(i));
end loop;
v_status := DBMS_SQL.EXECUTE (cur);
LOOP
p_content := p_content || '<tr>';
EXIT WHEN (DBMS_SQL.FETCH_ROWS (cur) <= 0);
FOR i IN 1 ..ncols
loop
DBMS_SQL.COLUMN_VALUE (cur, i, vtab(i));
-- p_content := p_content || '<td>' || 'xyz' || '</td>';
p_content := p_content || '<td>' || vtab(i) || '</td>';
END LOOP;
p_content := p_content || '</tr>' ;
END LOOP;
p_content := p_content || '<table>' ;
DBMS_SQL.CLOSE_CURSOR (cur);
exception
when others then
     p_content := '<td>Exception Error in printing data</td><table>' ;
DBMS_SQL.CLOSE_CURSOR (cur);
end;
procedure excel_footer( p_footer in out nocopy clob)
as
begin
p_footer := '</body></html>';
end;
PROCEDURE get_usable_sql (p_sql_in IN clob, p_sql_out OUT clob)
IS
v_sql clob;
v_names DBMS_SQL.varchar2_table;
v_pos NUMBER;
v_length NUMBER;
v_exit NUMBER;
BEGIN
v_sql := p_sql_in;
v_names := wwv_flow_utilities.get_binds (v_sql);
FOR i IN 1 .. v_names.COUNT
LOOP
<<do_it_again>>
v_pos := INSTR (LOWER (v_sql), LOWER (v_names (i)));
v_length := LENGTH (LOWER (v_names (i)));
v_sql :=
SUBSTR (v_sql, 1, v_pos - 1)
|| v_names (i)
|| SUBSTR (v_sql, v_pos + v_length);
v_sql :=
REPLACE (v_sql,
UPPER (v_names (i)),
'(SELECT v('''
|| LTRIM (v_names (i), ':')
|| ''') FROM DUAL)'
IF INSTR (LOWER (v_sql), LOWER (v_names (i))) > 0
THEN
GOTO do_it_again;
END IF;
END LOOP;
p_sql_out := v_sql;
END;
END export_pkg_spread_sheet;
After creating the package pass the parameter to package like this
begin
export_pkg_spread_sheet.download_excel('select * from emp');
end;
Package will allow to download the spread shreet. If i try to pass the a complex query to package it is returning error as mentioned below
ORA-06502: PL/SQL: numeric or value error
In the above package there is a procedure called procedure excel_content which actuall prints the data in the spread sheet this is where the error is coming from there is a variable called vsql have declared it as clob to hold large string but still i am getting the same error when trying to pass a big string.
Please check the error and let me know.
Thanks
Sudhir

Hi Praveen,
This is the query i am using to pass
Declare
qry clob;
Begin
qry := ' 'SELECT
AR.REGION_CODE,
AR.DISTRICT_CODE,
AR.TERRITORY_CODE,
CASE
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NULL AND AR.TERRITORY_NAME IS NULL THEN
AR.REGION_NAME
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NOT NULL AND AR.TERRITORY_NAME IS NULL THEN
AR.DISTRICT_NAME
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NOT NULL AND AR.TERRITORY_NAME IS NOT NULL THEN
AR.TERRITORY_NAME
END TERR_NAME,
AR.EMPLOYEE_ID,
AR.LAST_NAME,
AR.FIRST_NAME,
AR.GENDER,
AR.DATE_OF_HIRE,
AR.PROJECT_EMPLOYEE_TITLE_ID,
AR.COMPANY_ID,
AR.CUSTOMER_EMAIL,
AR.BUSINESS_EMAIL,
AR.CUSTOMER_VOICEMAIL,
AR.CUSTOMER_VOICEMAIL_EXT,
AR.QUINTILES_VOICEMAIL,
AR.QUINTILES_VOICEMAIL_EXT , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ZipCode" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ZipCode" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ZipCode" FROM AR_V_ROSTER AR
LEFT JOIN AR_V_ADDRESS_HISTORY AAH
ON
(AR.PROJECT_ID = AAH.PROJECT_ID AND
AR.EMPLOYEE_ID = AAH.EMPLOYEE_ID)
WHERE
UPPER(AR.USER_EMPLOYEE_ID) = ''Q766730'' AND
AR.PROJECT_ID = 81 ';
export_pkg_spread_sheet.download_excel(qry);
End;
Praveen you can pass your DB table query to check the error. I am trying to pass as mentioned above.
Please let me know if my question is not clear.
Thanks
Sudhir

Pacman : returning error 16 from alpm_db_update

Recently, yaourt behave oddly on my homeserver, outputting some truncated errors messages as if they were answers from a regex search. Long story short, I tried to fix the problem but did not yet succeeded, so maybe someone here will help me.
What I tried :
Use pacman instead of yaourt -> gave me a full error message "opening /var/lib/pacman/sync/core/dhcpcd-5.1.3-1/depends failed : No file or directory" . I am not sure the problem is package-related since I uninstalled and reinstalled it.
Moreover when I tried pacman with -Scc and -Syy I had an error message about the core database. Then, with -Syu and --debug option, I had this:
:: Synchronizing packages data...
debug: failed to get lastupdate time for core
debug: using 'core.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: connected to distrib-coffee.ipsl.jussieu.fr successfully
downloading de core.db.tar.gz...
Error: deleting core database failed
debug: returning error 16 from alpm_db_update : removing entry from database failed
Error: updating core failed (removing entry from database failed)
Any idea ? Thanx in advance

Have you already tried a different mirror?

ATZ returning ERROR (N95 8GB)

I'm connecting to my N95 8GB via Bluetooth from a laptop running Ubuntu Linux. I had it working fine, but for the last few days whenever I dial out, it seems that the 'ATZ' command in the chat script is returning 'ERROR' instead of 'OK'.
I just can't see any reason for it. I've disabled/re-enabled Bluetooth on both sides, rebooted the phone, rebooted the laptop, turned any connectivity-related services off/on on the phone, but still no joy.
Does anyone have any suggestions as to why 'ATZ' might return 'ERROR' on an N95?
Thanks.
Ross

OK, ignore that. Thinking a little clearer this morning and it looks like I had inadvertently broke my /etc/bluetooth/rfcomm.conf file at some point. I had the 'rfcomm0' port bound to Channel 1 (Hands-free Audio Gateway), instead of Channel 4 (Dial-up Networking).
Not sure how/when I broke that, but the fact that it was returning 'OK' to my 'AT' commands had me convinced I was still talking to the modem service!
Sorry for the noise,
Ross

Function returning error text validation

Hi,
I have a page where i can insert/update user, organisation, responsible.
Organisation can be nullable.
Only one user at a time can be responsible for a organisation.
To check this responsible validation i made a function returning error text validation as follow:
BEGIN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = :p22_usr_org_id
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END;
The validation works fine.
But it goes wrong when i want to insert a new user, without assigning him to an organisation.
I get following message:
ORA-01722: invalid number
ERR-1024 Unable to run "function body returning text" validation.
Can someone please help me solve this problem?
Thanks

Hi,
try:
BEGIN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = nvl(:p22_usr_org_id,-1)
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END;This assumes that :p22_usr_org_id could be null and converts this to -1 (pick another default value if this may exist as an id). It is possible that the statement would otherwise be seen as WHERE usr_org_id = null which is invalid.
or you could do:
BEGIN
IF :p22_usr_org_id IS NOT NULL THEN
FOR c IN (SELECT usr_spa
FROM kpi_users
WHERE usr_org_id = :p22_usr_org_id
LOOP
IF upper(:p22_usr_spa) = upper('YES') and upper(c.usr_spa) = upper('YES')
THEN
RETURN 'A user is already responsible for this organisation'||'!';
END IF;
END LOOP;
END IF;
END;As this would stop the validation running if the :p22_usr_org_id is null.
Or, you could just make your validation conditional on p22_usr_org_id not being null?
Andy

Function returning error - change notification

I have a function returning error text. When error occurs I get the message
'xx error has occurred' on the screen (in notification). Is there a way to control the message text so I can display different text?

It's something like this:
DECLARE l_code zip.code%TYPE;
got_error varchar2(1) := 'N';
l_check_fld varchar2(30000);
l_error_fld varchar2(32000);
vErrorFields varchar2(1000);
CURSOR check_zip IS
select ''
from zip
where code = l_code;
BEGIN
apex_collection.create_or_truncate_collection('ZIP');
FOR i IN 1 .. apex_application.g_f03.COUNT LOOP
vErrorFields := '';
/* Code MUST be entered */
if (apex_application.g_f03(i) is null and
(apex_application.g_f04(i) is not null or
apex_application.g_f05(i) is not null))then
got_error := 'Y';
vErrorFields := vErrorFields || ',f03';
l_error_fld := l_error_fld || 'Row ' || to_char(i) || ':' ||' <span style="color: red">Code cannot be <strong>blank.</strong></span><br>';
end if;
END LOOP;
if got_error = 'N' then
apex_collection.delete_collection('ZIP');
end if;
RETURN l_error_fld;
END;

Returning Error Status back from Form to external program

Question,
I am trying to run a form essentially from the command line. I need to programatically catch any error codes that might have occured in the form by an external program. I can find nothing about returning errors back from the form or how to display it.
Any assistance is appreciated.
Andy Hendrickson
null

Hello Andreas,
Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
Cheers,
Mike

Returning error to Javascript from Webkit plugin

Hi all,
I want to return an error and possibly error string using exception or any other means from a web kit plug-in to Java script. In the success case these functions returns NSString, NSNumber,... etc. Can some one pls. provide a sample code to return error code and/or error string, so that Java script can detect the error condition.
Thanks
Akhilesh

Found it,
[WebScriptObject throwException: @"There is an error"];

RVTSH-189: Subroutine rvtshiline() returned error

Similar Messages

Maybe you are looking for