RVTTH - 4448
Hi,
I some times gets the above error in our R12 instance. Oracle has given me the solution for this problem.
Solution
Your issue seems to be similar to one described in Note 832119.1 Receiving Error Rvtptcontrol Failed Rvtth-445 Subroutine Ora-20001: -: Xla-95103.
This solution gives a solution for this issue. However I wish to know why this error occurs in the system.
Regards,
Thavisha Dayaratne
I some times gets the above error in our R12 instance. Oracle has given me the solution for this problem.
Solution
Your issue seems to be similar to one described in Note 832119.1 Receiving Error Rvtptcontrol Failed Rvtth-445 Subroutine Ora-20001: -: Xla-95103.
This solution gives a solution for this issue. However I wish to know why this error occurs in the system.Since you got this solution from Oracle, just ask the support about the reason (update the SR).
It is normal for the objects to get invalidated after applying any application patch. And, it is also normal to relink the executable files.
Thanks,
Hussein
Similar Messages
-
May I use same transceiver MGBLH1 for linksys2024 and also for the module WS-4448-GB-SFP ?
Hi everybody,
I need to connect 35 nos switches linksys SRW2024 to one switch Cisco Catalyst 4503 - module WS-4448-GB-SFP, with single mode fiber optic.
So my question is, what kind of transceiver can I use to connect the switches? I will use also fiber patch panel, and I need to know also what kind of connectors,and patch cords I need for this one?
I have a few transceivers MGBLH1, this kind may I use also for WS-4448-GB-SFP?
Thanks in advanced for any help from you!Typically, you cannot use a Linksys SFP modules within a standard Cisco switch due to a software compatibility check between the equipment and the SFP module.
For the Cisco switch, the following compatibility document provides the part numbers for your equipment.
<http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html>
I don't know if the Linksys has the same compatibility check software, but I would assume so. It also prevents the user from purchasing SFP's from a third-party manufacturer.
Both the Cisco SFP modules use LC style connectors.
Hope this helps! -
Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3
I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 SlowGusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears? -
[Solved] Xorg 1.8 / Trackpoint configuration issues.
After upgrading to X.Org X Server 1.8.1.902 (1.8.2 RC 2) on a T400, I've been having a strange issue with scrolling and middle-mouse-button pasting and the new configuration system.
After the initial upgrade, I had no keyboard or trackpoint whatsoever (though the touchpad has always mysteriously worked perfectly) -- after some configuration work, mostly from these forums -- I got most things working:
The problem I still have, though, is that EmulateWheelTimeout seems to have no effect (I think). It's loaded (by default, I believe) -- but all the same, the mouse moves when I scroll, and more annoyingly, on middle-mouse click, everything is pasted twice.
Edit: I though I'd add another piece of oddness that would help people figure out what is going on. When I restart X, I get no keyboard whatsoever, until I send the first mouse click. Then everything works as described.
Edit 2: Setting Option "EmulateWheelTimeout" "1" took care of the double-pasting issue, though the behavior is strange (mouse still moves while scrolling, though less...). I'd be curious what happens with other small values (5, 10, etc.). Anyhow, I'm going to mark this as solved, though I wouldn't say it is.
I've tried a number of different permutations of the configs below, and what's there works well except for this issue:
Here is my xorg.conf.d/20-trackpoint.conf
Section "InputClass"
Identifier "Trackpoint Wheel Emulation"
MatchProduct "TPPS/2 IBM TrackPoint"
MatchIsPointer "on"
Driver "evdev"
Option "Device" "/dev/input/by-path/platform-i8042-serio-2-event-mouse"http://www.google.com/firefox
Option "GrabDevice" "False"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
#Option "EmulateWheelTimeout" "200"
Option "Emulate3Buttons" "false"
Option "XAxisMapping" "6 7"
Option "YAxisMapping" "4 5"
EndSection
Section "InputClass"
Identifier "disabling synaptic second trackpoint found"
MatchProduct "TPPS/2 IBM TrackPoint"
MatchDevicePath "/dev/input/mouse1"
Option "Ignore" "on"
EndSection
And here is my Xorg.0.log:
[ 5421.714] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 5421.714] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad"
[ 5421.714] (II) Synaptics touchpad driver version 1.2.2
[ 5421.714] (**) Option "Device" "/dev/input/event10"
[ 5421.753] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 5421.753] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 5421.753] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 5421.753] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 5421.753] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 5421.753] (**) Option "SHMConfig" "on"
[ 5421.753] (**) Option "EmulateTwoFingerMinZ" "0"
[ 5421.753] (**) Option "VertEdgeScroll" "on"
[ 5421.753] (**) Option "HorizEdgeScroll" "on"
[ 5421.753] (**) Option "VertTwoFingerScroll" "on"
[ 5421.753] (**) Option "HorizTwoFingerScroll" "on"
[ 5421.753] (**) Option "TapButton1" "1"
[ 5421.753] (**) Option "TapButton2" "2"
[ 5421.753] (**) Option "TapButton3" "3"
[ 5421.753] (**) Option "CircularScrolling" "on"
[ 5421.753] (**) Option "CircScrollTrigger" "2"
[ 5421.779] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 5421.780] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 5421.793] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 5421.793] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 5421.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 5421.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 5421.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 5421.819] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 5421.820] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 5421.820] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "disabling synaptic second mouse found"
[ 5421.820] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event11)
[ 5421.820] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 5421.820] (II) LoadModule: "evdev"
[ 5421.820] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5421.820] (II) Module evdev: vendor="X.Org Foundation"
[ 5421.820] compiled for 1.8.0, module version = 2.4.0
[ 5421.820] Module class: X.Org XInput Driver
[ 5421.820] ABI class: X.Org XInput driver, version 9.0
[ 5421.820] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 5421.820] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/by-path/platform-i8042-serio-2-event-mouse"
[ 5421.833] (II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 5421.833] (II) TPPS/2 IBM TrackPoint: Found relative axes
[ 5421.833] (II) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 5421.833] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 5421.833] (**) Option "Emulate3Buttons" "false"
[ 5421.833] (II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation off.
[ 5421.833] (**) Option "EmulateWheel" "true"
[ 5421.833] (**) Option "EmulateWheelButton" "2"
[ 5421.833] (**) Option "YAxisMapping" "4 5"
[ 5421.833] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 5421.833] (**) Option "XAxisMapping" "6 7"
[ 5421.833] (**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 5421.833] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5421.833] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 5421.833] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 5421.833] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 5421.833] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 5421.833] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 5421.833] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 5421.833] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 5421.833] (**) TPPS/2 IBM TrackPoint: Ignoring device from InputClass "disabling synaptic second trackpoint found"
[ 5421.834] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 5421.834] (II) No input driver/identifier specified (ignoring)
[ 5424.706] (II) 3rd Button detected: disabling emulate3Button
Last edited by sammermpc (2010-07-16 05:17:53)Nothing ?
Switchng off hal deamon and cleaning ~/.kde* has no effect...
So, after searching on google again an again, still nothing found.... even among the Ubuntu specific issue where post are terminated
with "wait next version of the package", the windows-style answer.
I will continue my attempts to fix this... but my conclusion about this is that hal was more precise in his behavior than udev... -
[solved] Xorg-1.8 + KDE on Asus 1201n : dupplicated Fn key event
Hello,
after upgrading to Xorg 1.8 one week ago, I noticed that my Fn keys (sound up/down, mute) were dupplicated. For example, if I press Fn+F10 (=MUTE/Unmute), the sound get muted and immediately unmuted.
Moreover,
My xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
10-evdev.conf:
# Catchall classes for input devices
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "ch"
Option "XkbVariant" "fr"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
And the Xorg.0.log file, we can see that the keyboard is added twice...
[ 19.593] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 30 09:48:01 2010
[ 19.649] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.649] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.719] (==) ServerLayout "Layout0"
[ 19.720] (**) |-->Screen "Screen0" (0)
[ 19.720] (**) | |-->Monitor "Monitor0"
[ 19.720] (**) | |-->Device "Device0"
[ 19.720] (==) Automatically adding devices
[ 19.720] (==) Automatically enabling devices
[ 19.780] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.780] Entry deleted from font path.
[ 19.804] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.804] Entry deleted from font path.
[ 19.804] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.804] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.804] Entry deleted from font path.
[ 19.804] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.804] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 19.804] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.804] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.805] (II) Loader magic: 0x7ce880
[ 19.805] (II) Module ABI versions:
[ 19.805] X.Org ANSI C Emulation: 0.4
[ 19.805] X.Org Video Driver: 7.0
[ 19.805] X.Org XInput driver : 9.0
[ 19.805] X.Org Server Extension : 3.0
[ 19.819] (--) PCI: (0:0:3:5) 10de:0aa3:1043:8402 nVidia Corporation MCP79 Co-processor rev 177, Mem @ 0xf9f80000/524288
[ 19.819] (--) PCI:*(0:5:0:0) 10de:0876:1043:8402 nVidia Corporation ION VGA [GeForce 9400M] rev 177, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
[ 19.820] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 19.820] (II) LoadModule: "extmod"
[ 19.864] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19.872] (II) Module extmod: vendor="X.Org Foundation"
[ 19.872] compiled for 1.8.1.902, module version = 1.0.0
[ 19.872] Module class: X.Org Server Extension
[ 19.872] ABI class: X.Org Server Extension, version 3.0
[ 19.872] (II) Loading extension MIT-SCREEN-SAVER
[ 19.872] (II) Loading extension XFree86-VidModeExtension
[ 19.872] (II) Loading extension XFree86-DGA
[ 19.872] (II) Loading extension DPMS
[ 19.872] (II) Loading extension XVideo
[ 19.872] (II) Loading extension XVideo-MotionCompensation
[ 19.872] (II) Loading extension X-Resource
[ 19.872] (II) LoadModule: "dbe"
[ 19.873] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.879] (II) Module dbe: vendor="X.Org Foundation"
[ 19.879] compiled for 1.8.1.902, module version = 1.0.0
[ 19.879] Module class: X.Org Server Extension
[ 19.879] ABI class: X.Org Server Extension, version 3.0
[ 19.879] (II) Loading extension DOUBLE-BUFFER
[ 19.879] (II) LoadModule: "glx"
[ 19.879] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.470] (II) Module glx: vendor="NVIDIA Corporation"
[ 20.479] compiled for 4.0.2, module version = 1.0.0
[ 20.479] Module class: X.Org Server Extension
[ 20.479] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:10:31 PDT 2010
[ 20.480] (II) Loading extension GLX
[ 20.480] (II) LoadModule: "record"
[ 20.480] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.490] (II) Module record: vendor="X.Org Foundation"
[ 20.490] compiled for 1.8.1.902, module version = 1.13.0
[ 20.490] Module class: X.Org Server Extension
[ 20.490] ABI class: X.Org Server Extension, version 3.0
[ 20.491] (II) Loading extension RECORD
[ 20.491] (II) LoadModule: "dri"
[ 20.491] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.527] (II) Module dri: vendor="X.Org Foundation"
[ 20.527] compiled for 1.8.1.902, module version = 1.0.0
[ 20.527] ABI class: X.Org Server Extension, version 3.0
[ 20.527] (II) Loading extension XFree86-DRI
[ 20.527] (II) LoadModule: "dri2"
[ 20.527] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.528] (II) Module dri2: vendor="X.Org Foundation"
[ 20.528] compiled for 1.8.1.902, module version = 1.2.0
[ 20.528] ABI class: X.Org Server Extension, version 3.0
[ 20.528] (II) Loading extension DRI2
[ 20.528] (II) LoadModule: "nvidia"
[ 20.539] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 20.600] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 20.604] compiled for 4.0.2, module version = 1.0.0
[ 20.604] Module class: X.Org Video Driver
[ 20.640] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:45:02 PDT 2010
[ 20.640] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 20.641] (++) using VT number 7
[ 20.643] (II) Primary Device is: PCI 05@00:00:0
[ 20.644] (II) Loading sub module "fb"
[ 20.644] (II) LoadModule: "fb"
[ 20.644] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.657] (II) Module fb: vendor="X.Org Foundation"
[ 20.657] compiled for 1.8.1.902, module version = 1.0.0
[ 20.658] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.658] (II) Loading sub module "wfb"
[ 20.658] (II) LoadModule: "wfb"
[ 20.711] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 20.712] (II) Module wfb: vendor="X.Org Foundation"
[ 20.712] compiled for 1.8.1.902, module version = 1.0.0
[ 20.712] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.713] (II) Loading sub module "ramdac"
[ 20.713] (II) LoadModule: "ramdac"
[ 20.713] (II) Module "ramdac" already built-in
[ 20.735] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 20.735] (==) NVIDIA(0): RGB weight 888
[ 20.735] (==) NVIDIA(0): Default visual is TrueColor
[ 20.735] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.735] (**) NVIDIA(0): Option "NoLogo" "true"
[ 20.735] (**) NVIDIA(0): Option "ConnectedMonitor" "CRT , CRT"
[ 20.735] (**) NVIDIA(0): Option "TwinView" "TRUE"
[ 20.736] (**) NVIDIA(0): Option "TwinViewOrientation" "Clone"
[ 20.736] (**) NVIDIA(0): Option "SecondMonitorHorizSync" "0"
[ 20.736] (**) NVIDIA(0): Option "SecondMonitorVertRefresh" "0"
[ 20.736] (**) NVIDIA(0): Enabling RENDER acceleration
[ 20.736] (**) NVIDIA(0): ConnectedMonitor string: "CRT , CRT"
[ 20.736] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 20.736] (II) NVIDIA(0): enabled.
[ 21.512] (WW) NVIDIA(GPU-0): Invalid ConnectedMonitor request; request was for 'CRT-0,
[ 21.512] (WW) NVIDIA(GPU-0): CRT-1', but the valid display devices are 'CRT-0, DFP-0,
[ 21.512] (WW) NVIDIA(GPU-0): DFP-1'.
[ 21.527] (II) NVIDIA(0): NVIDIA GPU ION (C79) at PCI:5:0:0 (GPU-0)
[ 21.527] (--) NVIDIA(0): Memory: 524288 kBytes
[ 21.527] (--) NVIDIA(0): VideoBIOS: 62.79.67.00.00
[ 21.527] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 21.527] (--) NVIDIA(0): Connected display device(s) on ION at PCI:5:0:0:
[ 21.527] (--) NVIDIA(0): HSD121PHW1 (DFP-0)
[ 21.527] (--) NVIDIA(0): HSD121PHW1 (DFP-0): 330.0 MHz maximum pixel clock
[ 21.527] (--) NVIDIA(0): HSD121PHW1 (DFP-0): Internal Dual Link LVDS
[ 21.538] (WW) NVIDIA(0): No TwinView "MetaModes" specified; will fall back to Display
[ 21.538] (WW) NVIDIA(0): SubSection modes.
[ 21.538] (**) NVIDIA(0): TwinView enabled
[ 21.538] (WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
[ 21.569] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 21.569] (==) NVIDIA(0):
[ 21.569] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 21.569] (==) NVIDIA(0): will be used as the requested mode.
[ 21.569] (==) NVIDIA(0):
[ 21.569] (II) NVIDIA(0): Validated modes:
[ 21.569] (II) NVIDIA(0): "nvidia-auto-select"
[ 21.569] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 22.632] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[ 22.633] (--) NVIDIA(0): option
[ 22.633] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 22.633] (--) Depth 24 pixmap format is 32 bpp
[ 22.633] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 22.634] (II) NVIDIA(0): Initialized GPU GART.
[ 22.641] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 22.641] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 22.641] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 22.641] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 22.641] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 22.641] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 22.641] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 22.641] (II) NVIDIA(0): Config Options in the README.
[ 22.642] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[ 22.642] (II) NVIDIA(0): enough to receive ACPI hotkey events.
[ 22.642] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[ 22.644] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 22.920] (II) Loading extension NV-GLX
[ 22.960] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 22.994] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 22.994] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 23.005] (==) NVIDIA(0): Backing store disabled
[ 23.005] (==) NVIDIA(0): Silken mouse enabled
[ 23.013] (**) NVIDIA(0): DPMS enabled
[ 23.043] (II) Loading extension NV-CONTROL
[ 23.044] (II) Loading extension XINERAMA
[ 23.044] (II) Loading sub module "dri2"
[ 23.044] (II) LoadModule: "dri2"
[ 23.045] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.045] (II) NVIDIA(0): [DRI2] Setup complete
[ 23.045] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 23.045] (==) RandR enabled
[ 23.045] (II) Initializing built-in extension Generic Event Extension
[ 23.045] (II) Initializing built-in extension SHAPE
[ 23.045] (II) Initializing built-in extension MIT-SHM
[ 23.045] (II) Initializing built-in extension XInputExtension
[ 23.045] (II) Initializing built-in extension XTEST
[ 23.045] (II) Initializing built-in extension BIG-REQUESTS
[ 23.045] (II) Initializing built-in extension SYNC
[ 23.045] (II) Initializing built-in extension XKEYBOARD
[ 23.045] (II) Initializing built-in extension XC-MISC
[ 23.045] (II) Initializing built-in extension SECURITY
[ 23.045] (II) Initializing built-in extension XINERAMA
[ 23.045] (II) Initializing built-in extension XFIXES
[ 23.045] (II) Initializing built-in extension RENDER
[ 23.045] (II) Initializing built-in extension RANDR
[ 23.045] (II) Initializing built-in extension COMPOSITE
[ 23.045] (II) Initializing built-in extension DAMAGE
[ 23.052] (II) Initializing extension GLX
[ 23.688] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 23.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.688] (II) LoadModule: "evdev"
[ 23.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.708] (II) Module evdev: vendor="X.Org Foundation"
[ 23.708] compiled for 1.8.0, module version = 2.4.0
[ 23.708] Module class: X.Org XInput Driver
[ 23.708] ABI class: X.Org XInput driver, version 9.0
[ 23.708] (**) Power Button: always reports core events
[ 23.708] (**) Power Button: Device: "/dev/input/event4"
[ 23.720] (II) Power Button: Found keys
[ 23.720] (II) Power Button: Configuring as keyboard
[ 23.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 23.720] (**) Option "xkb_rules" "evdev"
[ 23.720] (**) Option "xkb_model" "evdev"
[ 23.720] (**) Option "xkb_layout" "ch"
[ 23.720] (**) Option "xkb_variant" "fr"
[ 23.720] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 23.826] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 23.826] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 23.826] (**) Video Bus: always reports core events
[ 23.827] (**) Video Bus: Device: "/dev/input/event8"
[ 23.873] (II) Video Bus: Found keys
[ 23.873] (II) Video Bus: Configuring as keyboard
[ 23.873] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 23.873] (**) Option "xkb_rules" "evdev"
[ 23.873] (**) Option "xkb_model" "evdev"
[ 23.873] (**) Option "xkb_layout" "ch"
[ 23.873] (**) Option "xkb_variant" "fr"
[ 23.873] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 23.875] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 23.876] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.876] (**) Power Button: always reports core events
[ 23.876] (**) Power Button: Device: "/dev/input/event3"
[ 23.900] (II) Power Button: Found keys
[ 23.900] (II) Power Button: Configuring as keyboard
[ 23.900] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 23.900] (**) Option "xkb_rules" "evdev"
[ 23.900] (**) Option "xkb_model" "evdev"
[ 23.900] (**) Option "xkb_layout" "ch"
[ 23.900] (**) Option "xkb_variant" "fr"
[ 23.900] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 23.901] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 23.901] (II) No input driver/identifier specified (ignoring)
[ 23.902] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 23.902] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 23.902] (**) Sleep Button: always reports core events
[ 23.902] (**) Sleep Button: Device: "/dev/input/event2"
[ 23.923] (II) Sleep Button: Found keys
[ 23.923] (II) Sleep Button: Configuring as keyboard
[ 23.923] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 23.923] (**) Option "xkb_rules" "evdev"
[ 23.923] (**) Option "xkb_model" "evdev"
[ 23.923] (**) Option "xkb_layout" "ch"
[ 23.923] (**) Option "xkb_variant" "fr"
[ 23.923] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 23.929] (II) config/udev: Adding input device USB 2.0 PC Cam (/dev/input/event10)
[ 23.929] (**) USB 2.0 PC Cam: Applying InputClass "evdev keyboard catchall"
[ 23.929] (**) USB 2.0 PC Cam: always reports core events
[ 23.929] (**) USB 2.0 PC Cam: Device: "/dev/input/event10"
[ 23.950] (II) USB 2.0 PC Cam: Found keys
[ 23.950] (II) USB 2.0 PC Cam: Configuring as keyboard
[ 23.950] (II) XINPUT: Adding extended input device "USB 2.0 PC Cam" (type: KEYBOARD)
[ 23.950] (**) Option "xkb_rules" "evdev"
[ 23.950] (**) Option "xkb_model" "evdev"
[ 23.950] (**) Option "xkb_layout" "ch"
[ 23.950] (**) Option "xkb_variant" "fr"
[ 23.950] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 23.953] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 23.953] (II) No input driver/identifier specified (ignoring)
[ 23.961] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 23.961] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 23.962] (**) Eee PC WMI hotkeys: always reports core events
[ 23.962] (**) Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 23.976] (II) Eee PC WMI hotkeys: Found keys
[ 23.976] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 23.976] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 23.976] (**) Option "xkb_rules" "evdev"
[ 23.977] (**) Option "xkb_model" "evdev"
[ 23.977] (**) Option "xkb_layout" "ch"
[ 23.977] (**) Option "xkb_variant" "fr"
[ 23.977] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 23.978] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event9)
[ 23.978] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
[ 23.978] (**) Asus EeePC extra buttons: always reports core events
[ 23.978] (**) Asus EeePC extra buttons: Device: "/dev/input/event9"
[ 24.016] (II) Asus EeePC extra buttons: Found keys
[ 24.016] (II) Asus EeePC extra buttons: Configuring as keyboard
[ 24.016] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD)
[ 24.016] (**) Option "xkb_rules" "evdev"
[ 24.016] (**) Option "xkb_model" "evdev"
[ 24.017] (**) Option "xkb_layout" "ch"
[ 24.017] (**) Option "xkb_variant" "fr"
[ 24.017] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 24.018] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24.018] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.018] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.018] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24.043] (II) AT Translated Set 2 keyboard: Found keys
[ 24.043] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.043] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 24.043] (**) Option "xkb_rules" "evdev"
[ 24.043] (**) Option "xkb_model" "evdev"
[ 24.043] (**) Option "xkb_layout" "ch"
[ 24.043] (**) Option "xkb_variant" "fr"
[ 24.043] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 24.044] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 24.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 24.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 24.045] (II) LoadModule: "synaptics"
[ 24.045] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.060] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.060] compiled for 1.8.0.902, module version = 1.2.2
[ 24.060] Module class: X.Org XInput Driver
[ 24.060] ABI class: X.Org XInput driver, version 9.0
[ 24.060] (II) Synaptics touchpad driver version 1.2.2
[ 24.060] (**) Option "Device" "/dev/input/event6"
[ 24.190] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 24.190] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 24.190] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 24.190] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 24.190] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 24.190] (**) Option "SHMConfig" "on"
[ 24.190] (**) Option "MaxTapMove" "2000"
[ 24.190] (**) Option "VertEdgeScroll" "on"
[ 24.190] (**) Option "VertTwoFingerScroll" "on"
[ 24.190] (**) Option "HorizTwoFingerScroll" "on"
[ 24.190] (**) Option "TapButton1" "1"
[ 24.190] (**) Option "CircularScrolling" "on"
[ 24.296] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 24.296] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.350] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 24.350] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 24.350] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 24.350] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.350] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.430] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 24.430] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 24.430] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 24.430] (II) Synaptics touchpad driver version 1.2.2
[ 26.296] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 26.296] (**) Option "Device" "/dev/input/mouse0"
[ 26.323] (**) Option "SHMConfig" "on"
[ 26.323] (**) Option "MaxTapMove" "2000"
[ 26.323] (**) Option "VertEdgeScroll" "on"
[ 26.323] (**) Option "VertTwoFingerScroll" "on"
[ 26.323] (**) Option "HorizTwoFingerScroll" "on"
[ 26.323] (**) Option "TapButton1" "1"
[ 26.323] (**) Option "CircularScrolling" "on"
[ 26.344] Query no Synaptics: 6003C8
[ 26.344] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 26.344] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 26.386] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 26.386] (II) UnloadModule: "synaptics"
[ 26.387] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 26.387] (II) No input driver/identifier specified (ignoring)
I have not put the 10-synaptic touchpad config file since it works well (Identifier "touchpad catchall" Driver "synaptics").
Any idea what could be the problem ?
Last edited by Bluespear (2010-07-18 20:05:16)Nothing ?
Switchng off hal deamon and cleaning ~/.kde* has no effect...
So, after searching on google again an again, still nothing found.... even among the Ubuntu specific issue where post are terminated
with "wait next version of the package", the windows-style answer.
I will continue my attempts to fix this... but my conclusion about this is that hal was more precise in his behavior than udev... -
SAP failed to start after database restored to a new machine
Hi,
We have a SAp BW 3.5 running on a SQL 2000, recently our server is degraded and become unstable to host our BW server.
So we build another box with the same OS and DB version and patches, ran sapinst from the SAP DVD, upgraded the kernel to the same level as our current setup.
SAP started Ok with the kernel upgraded, however when we restored the backup to it, if fails.
I have attached the developer trace log, and hope someone can give us some help on diagnosing the issues
============================================
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jan 17 07:11:48 2008
kernel runs with dp version 130(ext=102) (@(#) DPLIB-INT-VERSION-130)
length of sys_adm_ext is 312 bytes
sysno 00
sid PBW
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 129
intno 20020600
make: multithreaded, ASCII
pid 5228
***LOG Q00=> DpSapEnvInit, DPStart (00 5228) [dpxxdisp.c 1098]
shared lib "dw_xml.dll" version 129 successfully loaded
shared lib "dw_xtc.dll" version 129 successfully loaded
shared lib "dw_stl.dll" version 129 successfully loaded
shared lib "dw_gui.dll" version 129 successfully loaded
shared lib "dw_mdm.dll" version 129 successfully loaded
Thu Jan 17 07:12:03 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0052.qqq.nxst) took 15 seconds
Thu Jan 17 07:12:24 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 21 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3893]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >acbwprd_PBW_00 <
DpShMCreate: sizeof(wp_adm) 24840 (828)
DpShMCreate: sizeof(tm_adm) 23691840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 30000 (60)
DpShMCreate: sizeof(appc_ca_adm) 90000 (60)
DpShMCreate: sizeof(comm_adm) 768000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (224040/329544/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06BD0040, size: 25164464)
DpShMCreate: allocated sys_adm at 06BD0040
DpShMCreate: allocated wp_adm at 06BD17D0
DpShMCreate: allocated tm_adm_list at 06BD78D8
DpShMCreate: allocated tm_adm at 06BD7900
DpShMCreate: allocated wp_ca_adm at 0826FB40
DpShMCreate: allocated appc_ca_adm at 08277070
DpShMCreate: allocated comm_adm_list at 0828D000
DpShMCreate: allocated comm_adm at 0828D018
DpShMCreate: allocated vmc_adm_list at 08348818
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08348840
DpShMCreate: allocated wall_adm at 08348848
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 2070MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 2072MB
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 517 blocks reserved for free list.
ES initialized.
ERROR => DpForkExec: CreateProcess (2: No such file or directory) [dpntdisp.c 1432]
***LOG Q0I=> DpForkExec, CreateProcess ( CreateProcess 2) [dpntdisp.c 1434]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 4
Operating System : NT 5.0, Build 2195
Service Pack : Service Pack 4
NT Pagefile Informations
Config. minimum size : 6288384 K
Config. maximum size : 6288384 K
Avail. maximum size : 6288384 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
2095104 K
2095104 K
2095104 K
2095104 K
2
D:\pagefile.sys
4193280 K
4193280 K
4193280 K
4193280 K
NT Task Manager Informations
Total Handles : 14929
Total Threads : 849
Total Processes : 59
Commit Charge Total : 4501576 K
Commit Charge Limit : 12129696 K
Commit Charge Peak : 7082844 K
Phys.Memory Total : 6028624 K
Phys.Memory Available : 3619128 K
File Cache : 94224 K
Kernel Memory Total : 84712 K
Kernel Memory Paged : 57956 K
Kernel Memory Nonpaged : 26756 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 739448 K
Private Pages : 49272 K
Total heap size : 9481 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4424 K
Allocated heap memory : 4816 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
8
232 K
672 K
24 K
112 K
5
256
smss.exe
408 K
1992 K
1080 K
2652 K
0
308
winlogon.exe
1356 K
10644 K
7384 K
8188 K
7
336
services.exe
115548 K
218872 K
11036 K
15780 K
264040
348
lsass.exe
6960 K
7024 K
3104 K
3192 K
3
456
termsrv.exe
3772 K
3784 K
1864 K
22596 K
1
564
svchost.exe
4520 K
4584 K
1696 K
1792 K
1
596
spoolsv.exe
4580 K
4688 K
2572 K
2752 K
1
664
msdtc.exe
6180 K
6232 K
2204 K
2220 K
1
844
CpqRcmc.exe
1080 K
1084 K
268 K
272 K
0
860
vcagent.exe
6968 K
6976 K
2172 K
2348 K
1
876
svchost.exe
6512 K
6540 K
1936 K
1972 K
2
896
HS_Service.exe
1748 K
1748 K
532 K
532 K
0
920
llssrv.exe
2524 K
2524 K
796 K
796 K
0
1064
regsvc.exe
1064 K
1072 K
288 K
300 K
0
1292
MSTask.exe
3724 K
3828 K
1192 K
1320 K
1
1324
SecurePathAgent.exe
6932 K
87096 K
4360 K
85816 K
4185
1388
snmp.exe
5340 K
5340 K
2396 K
2408 K
1
1436
smhstart.exe
4124 K
4128 K
1752 K
1756 K
1
1460
WinMgmt.exe
976 K
8236 K
6116 K
6620 K
1206
1476
svchost.exe
13352 K
68136 K
9236 K
67064 K
837
1488
cpqnimgt.exe
4448 K
4456 K
1356 K
1368 K
1
1528
cqmgserv.exe
2360 K
2360 K
828 K
844 K
0
1544
cqmgstor.exe
3972 K
3980 K
1300 K
1356 K
1
1556
mssearch.exe
2844 K
7768 K
4584 K
4608 K
2
1564
hpsmhd.exe
11240 K
11240 K
7696 K
8136 K
23
1696
sysdown.exe
2636 K
2636 K
800 K
800 K
0
1712
svchost.exe
9792 K
10376 K
6872 K
8184 K
12
1796
cqmghost.exe
5848 K
5928 K
2620 K
2764 K
91
1932
rotatelogs.exe
1544 K
1544 K
460 K
460 K
0
1080
rotatelogs.exe
1516 K
1516 K
448 K
448 K
0
1980
hpsmhd.exe
17156 K
17156 K
14952 K
14952 K
24
2004
rotatelogs.exe
1544 K
1544 K
460 K
460 K
0
1440
rotatelogs.exe
1516 K
1516 K
448 K
448 K
0
3100
Explorer.EXE
10376 K
12148 K
4880 K
5440 K
93
3252
Atiptaxx.exe
3664 K
3664 K
1032 K
1044 K
0
3272
cpqteam.exe
1804 K
1804 K
384 K
384 K
0
3296
jusched.exe
2008 K
2008 K
540 K
540 K
0
3316
sqlmangr.exe
4996 K
6648 K
1328 K
2820 K
2
4184
cmd.exe
132 K
3048 K
680 K
688 K
1
5656
mmc.exe
1284 K
14852 K
5792 K
6564 K
5
4088
sapstartsrv.exe
14280 K
14280 K
14964 K
14984 K
3
3188
msg_server.exe
[MS] PBW_01
7088 K
7088 K
7864 K
13564 K
1
3092
enserver.exe
[**] PBW_01
15376 K
15384 K
53664 K
53696 K
3
1252
mmc.exe
4176 K
8816 K
5728 K
5804 K
3
4128
msg_server.exe
[MS] PBW_00
6684 K
6692 K
6640 K
6668 K
1
5228
disp+work.exe
55660 K
55700 K
49272 K
49320 K
22
4452
igswd.exe
[**] PBW_00
3828 K
4244 K
2204 K
2632 K
1
3928
igsmux.exe
13944 K
13988 K
12316 K
12360 K
3
4832
igspw.exe
13076 K
13076 K
12316 K
12316 K
3
5724
igspw.exe
13076 K
13076 K
12316 K
12316 K
3
1280
gwrd.EXE
[GW] PBW_00
50320 K
50320 K
9304 K
30796 K
12
3284
icman.EXE
14512 K
14512 K
15900 K
15900 K
3
Sum
500600 K
321956 K
Thu Jan 17 07:12:25 2008
DpJ2eeStart: j2ee state = INIT
ERROR => DpProcCreate: DpJ2eeStart failed [dpxxdisp.c 10518]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( acbwprd) [dpxxdisp.c 9915]
DpStartStopMsg: send start message (myname is >acbwprd_PBW_00 <)
DpStartStopMsg: start msg sent
Thu Jan 17 07:12:26 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 129
Release check o.K.
Thu Jan 17 07:13:05 2008
ERROR => W0 (pid 5132) died [dpxxdisp.c 12414]
ERROR => W1 (pid 4864) died [dpxxdisp.c 12414]
ERROR => W2 (pid 4424) died [dpxxdisp.c 12414]
ERROR => W3 (pid 1208) died [dpxxdisp.c 12414]
ERROR => W4 (pid 4404) died [dpxxdisp.c 12414]
ERROR => W5 (pid 4896) died [dpxxdisp.c 12414]
ERROR => W6 (pid 4764) died [dpxxdisp.c 12414]
ERROR => W7 (pid 3736) died [dpxxdisp.c 12414]
ERROR => W8 (pid 4372) died [dpxxdisp.c 12414]
ERROR => W9 (pid 3084) died [dpxxdisp.c 12414]
ERROR => W10 (pid 5148) died [dpxxdisp.c 12414]
ERROR => W11 (pid 4548) died [dpxxdisp.c 12414]
ERROR => W12 (pid 5016) died [dpxxdisp.c 12414]
ERROR => W13 (pid 4916) died [dpxxdisp.c 12414]
ERROR => W14 (pid 3280) died [dpxxdisp.c 12414]
ERROR => W15 (pid 4524) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W16 (pid 5444) died [dpxxdisp.c 12414]
ERROR => W17 (pid 5400) died [dpxxdisp.c 12414]
ERROR => W18 (pid 4196) died [dpxxdisp.c 12414]
ERROR => W19 (pid 4436) died [dpxxdisp.c 12414]
ERROR => W20 (pid 5412) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W21 (pid 5588) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W22 (pid 4676) died [dpxxdisp.c 12414]
ERROR => W23 (pid 5056) died [dpxxdisp.c 12414]
ERROR => W24 (pid 5292) died [dpxxdisp.c 12414]
ERROR => W25 (pid 3908) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W26 (pid 4532) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W27 (pid 5100) died [dpxxdisp.c 12414]
ERROR => W28 (pid 1204) died [dpxxdisp.c 12414]
ERROR => W29 (pid 4288) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5132 (SIGUSR2)
ERROR => DpWpKill(5132, SIGUSR2) failed [dpxxtool.c 2502]
killing W1-4864 (SIGUSR2)
ERROR => DpWpKill(4864, SIGUSR2) failed [dpxxtool.c 2502]
killing W2-4424 (SIGUSR2)
ERROR => DpWpKill(4424, SIGUSR2) failed [dpxxtool.c 2502]
killing W3-1208 (SIGUSR2)
ERROR => DpWpKill(1208, SIGUSR2) failed [dpxxtool.c 2502]
killing W4-4404 (SIGUSR2)
ERROR => DpWpKill(4404, SIGUSR2) failed [dpxxtool.c 2502]
killing W5-4896 (SIGUSR2)
ERROR => DpWpKill(4896, SIGUSR2) failed [dpxxtool.c 2502]
killing W6-4764 (SIGUSR2)
ERROR => DpWpKill(4764, SIGUSR2) failed [dpxxtool.c 2502]
killing W7-3736 (SIGUSR2)
ERROR => DpWpKill(3736, SIGUSR2) failed [dpxxtool.c 2502]
killing W8-4372 (SIGUSR2)
ERROR => DpWpKill(4372, SIGUSR2) failed [dpxxtool.c 2502]
killing W9-3084 (SIGUSR2)
ERROR => DpWpKill(3084, SIGUSR2) failed [dpxxtool.c 2502]
killing W10-5148 (SIGUSR2)
ERROR => DpWpKill(5148, SIGUSR2) failed [dpxxtool.c 2502]
killing W11-4548 (SIGUSR2)
ERROR => DpWpKill(4548, SIGUSR2) failed [dpxxtool.c 2502]
killing W12-5016 (SIGUSR2)
ERROR => DpWpKill(5016, SIGUSR2) failed [dpxxtool.c 2502]
killing W13-4916 (SIGUSR2)
ERROR => DpWpKill(4916, SIGUSR2) failed [dpxxtool.c 2502]
killing W14-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2502]
killing W15-4524 (SIGUSR2)
ERROR => DpWpKill(4524, SIGUSR2) failed [dpxxtool.c 2502]
killing W16-5444 (SIGUSR2)
ERROR => DpWpKill(5444, SIGUSR2) failed [dpxxtool.c 2502]
killing W17-5400 (SIGUSR2)
ERROR => DpWpKill(5400, SIGUSR2) failed [dpxxtool.c 2502]
killing W18-4196 (SIGUSR2)
ERROR => DpWpKill(4196, SIGUSR2) failed [dpxxtool.c 2502]
killing W19-4436 (SIGUSR2)
ERROR => DpWpKill(4436, SIGUSR2) failed [dpxxtool.c 2502]
killing W20-5412 (SIGUSR2)
ERROR => DpWpKill(5412, SIGUSR2) failed [dpxxtool.c 2502]
killing W21-5588 (SIGUSR2)
ERROR => DpWpKill(5588, SIGUSR2) failed [dpxxtool.c 2502]
killing W22-4676 (SIGUSR2)
ERROR => DpWpKill(4676, SIGUSR2) failed [dpxxtool.c 2502]
killing W23-5056 (SIGUSR2)
ERROR => DpWpKill(5056, SIGUSR2) failed [dpxxtool.c 2502]
killing W24-5292 (SIGUSR2)
ERROR => DpWpKill(5292, SIGUSR2) failed [dpxxtool.c 2502]
killing W25-3908 (SIGUSR2)
ERROR => DpWpKill(3908, SIGUSR2) failed [dpxxtool.c 2502]
killing W26-4532 (SIGUSR2)
ERROR => DpWpKill(4532, SIGUSR2) failed [dpxxtool.c 2502]
killing W27-5100 (SIGUSR2)
ERROR => DpWpKill(5100, SIGUSR2) failed [dpxxtool.c 2502]
killing W28-1204 (SIGUSR2)
ERROR => DpWpKill(1204, SIGUSR2) failed [dpxxtool.c 2502]
killing W29-4288 (SIGUSR2)
ERROR => DpWpKill(4288, SIGUSR2) failed [dpxxtool.c 2502]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:15 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Wed Jan 16 18:13:15 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5132 Ended no 1 0 0
1 DIA 4864 Ended no 1 0 0
2 DIA 4424 Ended no 1 0 0
3 DIA 1208 Ended no 1 0 0
4 DIA 4404 Ended no 1 0 0
5 DIA 4896 Ended no 1 0 0
6 DIA 4764 Ended no 1 0 0
7 DIA 3736 Ended no 1 0 0
8 DIA 4372 Ended no 1 0 0
9 DIA 3084 Ended no 1 0 0
10 DIA 5148 Ended no 1 0 0
11 DIA 4548 Ended no 1 0 0
12 DIA 5016 Ended no 1 0 0
13 DIA 4916 Ended no 1 0 0
14 DIA 3280 Ended no 1 0 0
15 DIA 4524 Ended no 1 0 0
16 UPD 5444 Ended no 1 0 0
17 UPD 5400 Ended no 1 0 0
18 UPD 4196 Ended no 1 0 0
19 UPD 4436 Ended no 1 0 0
20 UPD 5412 Ended no 1 0 0
21 ENQ 5588 Ended no 1 0 0
22 BTC 4676 Ended no 1 0 0
23 BTC 5056 Ended no 1 0 0
24 BTC 5292 Ended no 1 0 0
25 BTC 3908 Ended no 1 0 0
26 SPO 4532 Ended no 1 0 0
27 UP2 5100 Ended no 1 0 0
28 UP2 1204 Ended no 1 0 0
29 UP2 4288 Ended no 1 0 0
Dispatcher Queue Statistics Wed Jan 16 18:13:15 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Wed Jan 16 18:13:15 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Jan 16 18:13:15 2008
=============================
Slots: 500, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:20 2008
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >acbwprd_PBW_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 4, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1280) (SOFT_KILL)
Stop icman
killing process (3284) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:1280 HANDLE:316)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:21 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1280 HANDLE:316)
[DpProcDied] Process lives (PID:3284 HANDLE:312)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:22 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3284 HANDLE:312)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1161
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 17 07:13:23 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3284 HANDLE:312)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >acbwprd_PBW_00 <)
NiIMyHostName: hostname = 'acbwprd'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 4, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 4 / socket 1092 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 4, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek successful for hdl 4 / socket 1092 (r)
NiIRead: read 114, 1 packs, MESG_IO, hdl 4, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 4
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Thu Jan 17 07:13:24 2008
NiIPeek: peek for hdl 4 / socket 1092 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10153]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 4, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 4 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/500/30
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 18)
MBUF component DOWN
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 1092
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 5228) [dpxxdisp.c 8643]
Good Bye .....
============================================
Thanks
Kevin ChanThanks for your reply
Here are the DEV_W0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Jan 17 07:12:27 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\PBW\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\PBW\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PBW\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.126)
B New connection 0 created
M sysno 00
M sid PBW
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 129
M intno 20020600
M make: multithreaded, ASCII
M pid 5132
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5132) [dpxxdisp.c 1158]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 24840 (828)
M DpShMCreate: sizeof(tm_adm) 23691840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 30000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 90000 (60)
M DpShMCreate: sizeof(comm_adm) 768000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (224040/329544/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06BD0040, size: 25164464)
M DpShMCreate: allocated sys_adm at 06BD0040
M DpShMCreate: allocated wp_adm at 06BD17D0
M DpShMCreate: allocated tm_adm_list at 06BD78D8
M DpShMCreate: allocated tm_adm at 06BD7900
M DpShMCreate: allocated wp_ca_adm at 0826FB40
M DpShMCreate: allocated appc_ca_adm at 08277070
M DpShMCreate: allocated comm_adm_list at 0828D000
M DpShMCreate: allocated comm_adm at 0828D018
M DpShMCreate: allocated vmc_adm_list at 08348818
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 08348840
M DpShMCreate: allocated wall_adm at 08348848
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Jan 17 07:12:29 2008
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\PBW\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 126
C patchcomment MSSQL: Unknown table in FOR ALL ENTRIES (945910)
C np:(local) connection used on ACBWPRD
C CopyLocalParameters: dbuser is 'pbw'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pbw' setuser 'pbw']
C sloledb.cpp [ExecuteAndFlush,line 5886]: Error/Message: (err 4604, sev 0), There is no such user or group 'pbw'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pbw' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#2 @ 419] [dblink 0419 ]
B ***LOG BY0=> <message text not available> [dblink#2 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1284]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9559]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server acbwprd_PBW_00 on host acbwprd (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Jan 17 07:12:29 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9735
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 5132) [dpnttool.c 357] -
[SOLVED] system very slow after upgrade
I did today pacman -Syu after some time. I have Dell D630 laptop, Core 2 Duo 2x1.8GHz, 2GB RAM, VGA: Intel X3100. Now the whole system is really slow. I mean REALLY slow. Even opening terminal (urxvt) takes time. Browsing is slow. Mplayer can not handle 720p .mkv playback enymore. cpufreq-info shows both cores uses max. 1.8 GHz frequency under load. I tried top/htop/atop/iotop/powertop but found no suspicious process eating resources. Messages from error.log:
Mar 29 23:16:05 tortuga kernel: ata4.01: failed to resume link (SControl 0)
Mar 29 23:16:05 tortuga kernel: vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
Mar 29 23:16:05 tortuga kernel: vboxdrv: counter framework which can generate NMIs is active. You have to prevent
Mar 29 23:16:05 tortuga kernel: vboxdrv: the usage of hardware performance counters by
Mar 29 23:16:05 tortuga kernel: vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
I googled botth messages and as far as I can understand they are not source/symptom of my slowness.
If anybody have hint where to search, any advice will be really helpfull, because I am truly lost...
dmesg
# dmesg
Linux version 2.6.32-ARCH (thomas@evey) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680400 (usable)
BIOS-e820: 000000007f680400 - 0000000080000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7f680 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F800000 mask FFF800000 uncachable
2 base 07F700000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 0000000000100000 - 000000007f680400 (usable)
modified: 000000007f680400 - 0000000080000000 (reserved)
modified: 00000000f8000000 - 00000000fc000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed18000 - 00000000fed1c000 (reserved)
modified: 00000000fed20000 - 00000000fed90000 (reserved)
modified: 00000000feda0000 - 00000000feda6000 (reserved)
modified: 00000000fee00000 - 00000000fee10000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 7f363000 - 7f66fa7a
Allocated new RAMDISK: 00100000 - 0040ca7a
Move RAMDISK from 000000007f363000 - 000000007f66fa79 to 00100000 - 0040ca79
ACPI: RSDP 000fbb00 00024 (v02 DELL )
ACPI: XSDT 7f681e00 00064 (v01 DELL M08 27D70717 ASL 00000061)
ACPI: FACP 7f681c9c 000F4 (v04 DELL M08 27D70717 ASL 00000061)
ACPI: DSDT 7f682400 0613B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 7f690c00 00040
ACPI: HPET 7f681f00 00038 (v01 DELL M08 00000001 ASL 00000061)
ACPI: APIC 7f682000 00068 (v01 DELL M08 27D70717 ASL 00000047)
ACPI: ASF! 7f681c00 0007E (v32 DELL M08 27D70717 ASL 00000061)
ACPI: MCFG 7f681fc0 0003E (v16 DELL M08 27D70717 ASL 00000061)
ACPI: SLIC 7f68209c 00024 (v01 DELL M08 27D70717 ASL 00000061)
ACPI: TCPA 7f682300 00032 (v01 00000000 ASL 00000000)
ACPI: SSDT 7f680731 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1150MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000152f024] TEXT DATA BSS ==> [0001000000 - 000152f024]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0001530000 - 0001536188] BRK ==> [0001530000 - 0001536188]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000100000 - 000040ca7a] NEW RAMDISK ==> [0000100000 - 000040ca7a]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f680
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521755
free_area_init_node: node 0, pgdat c13dbe60, node_mem_map c1538000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2302 pages used for memmap
HighMem zone: 292228 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34680 r0 d22664 u2097152
pcpu-alloc: s34680 r0 d22664 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517677
Kernel command line: root=/dev/group1/arch ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007f680)
Memory: 2060220k/2087424k available (2797k kernel code, 25764k reserved, 1185k data, 412k init, 1178120k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc13e4000 - 0xc144b000 ( 412 kB)
.data : 0xc12bb55a - 0xc13e3a08 (1185 kB)
.text : 0xc1000000 - 0xc12bb55a (2797 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 1795.296 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.20 BogoMIPS (lpj=5984320)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7184.82 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 7f690c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eef]
pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fbf00-0xfe9fbfff]
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe8ff000-0xfe8fffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xfe7f0000-0xfe7fffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.4: reg 10 32bit mmio: [0xfe6ff000-0xfe6fffff]
pci 0000:03:01.4: reg 14 32bit mmio: [0xfe6fe800-0xfe6fefff]
pci 0000:03:01.4: supports D1 D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0a: ioport range 0xcb0-0xcbb has been reserved
system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:0b: ioport range 0x900-0x97f has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0xf400-0xf4fe has been reserved
system 00:0c: ioport range 0x1080-0x10bf has been reserved
system 00:0c: ioport range 0x10c0-0x10df has been reserved
system 00:0c: ioport range 0x809-0x809 has been reserved
system 00:0d: iomem range 0x0-0x9efff could not be reserved
system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x7f6803ff could not be reserved
system 00:0d: iomem range 0x7f680400-0x7f6fffff has been reserved
system 00:0d: iomem range 0x7f700000-0x7f7fffff has been reserved
system 00:0d: iomem range 0x7f700000-0x7fefffff could not be reserved
system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved
system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0x84000000-0x841fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000084200000-0x000000843fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000084400000-0x000000845fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5: IO window: 0x4000-0x4fff
pci 0000:00:1c.5: MEM window: 0xfe700000-0xfe7fffff
pci 0000:00:1c.5: PREFETCH window: 0x00000084600000-0x000000847fffff
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0: IO window: 0x005000-0x0050ff
pci 0000:03:01.0: IO window: 0x005400-0x0054ff
pci 0000:03:01.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:03:01.0: MEM window: 0x88000000-0x8bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x5000-0x5fff
pci 0000:00:1e.0: MEM window: 0xfe600000-0xfe6fffff
pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: enabling device (0000 -> 0003)
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:0b: resource 1 mem: [0x84000000-0x841fffff]
pci_bus 0000:0b: resource 2 pref mem [0x84200000-0x843fffff]
pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:0c: resource 1 mem: [0xfe800000-0xfe8fffff]
pci_bus 0000:0c: resource 2 pref mem [0x84400000-0x845fffff]
pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:09: resource 1 mem: [0xfe700000-0xfe7fffff]
pci_bus 0000:09: resource 2 pref mem [0x84600000-0x847fffff]
pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:03: resource 1 mem: [0xfe600000-0xfe6fffff]
pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:04: resource 0 io: [0x5000-0x50ff]
pci_bus 0000:04: resource 1 io: [0x5400-0x54ff]
pci_bus 0000:04: resource 2 pref mem [0x80000000-0x83ffffff]
pci_bus 0000:04: resource 3 mem: [0x88000000-0x8bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 3122k freed
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1269905228.550:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1730
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 412k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled. ignoring.
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
ata1.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1B, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5
ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-7: ST9160823AS, 3.ADC, max UDMA/133
ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST9160823AS 3.AD PQ: 0 ANSI: 5
ata4.01: failed to resume link (SControl 0)
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link down (SStatus 0 SControl 0)
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
padlock: VIA PadLock not detected.
EXT4-fs (dm-4): INFO: recovery required on readonly filesystem
EXT4-fs (dm-4): write access will be enabled during recovery
EXT4-fs (dm-4): orphan cleanup on readonly fs
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79470
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79469
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79468
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79467
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79466
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 48873
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 14902
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 115506
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 2598
EXT4-fs (dm-4): 9 orphan inodes deleted
EXT4-fs (dm-4): recovery complete
EXT4-fs (dm-4): mounted filesystem with ordered data mode
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 151
fuse init (API version 7.13)
ACPI: SSDT 7f681138 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 7f680bfd 004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 7f68137c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 7f6810b3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
Switching to clocksource hpet
processor LNXCPU:01: registered as cooling_device1
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (95 C)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
iTCO_vendor_support: vendor-support=0
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
Linux agpgart interface v0.103
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: Battery Slot [BAT0] (battery present)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: WMI: Mapper loaded
ACPI: Battery Slot [BAT1] (battery absent)
tg3.c:v3.102 (September 1, 2009)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:1c:0d:5b
eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01f9]
yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm] set up 7M of stolen space
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: irq 28 for MSI/MSI-X
usb 5-1: new low speed USB device using uhci_hcd and address 2
firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
phy0: Selected rate control algorithm 'iwl-3945-rs'
usb 5-1: configuration #1 chosen from 1 choice
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x19e offMax=0x5df
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001).
usb 7-1: new full speed USB device using uhci_hcd and address 2
usbcore: registered new interface driver hiddev
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7
generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
firewire_core: created device fw0: GUID 384fc00038f52070, S400
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
usb 7-1: configuration #1 chosen from 1 choice
clean.
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
usb 7-1.2: new full speed USB device using uhci_hcd and address 3
[drm] TV-16: set mode NTSC 480i 0
usb 7-1.2: configuration #1 chosen from 1 choice
[drm] LVDS-8: set mode 1280x800 1f
CPU0: Temperature above threshold, cpu clock throttled (total events = 1)
Disabling lock debugging due to kernel taint
CPU0: Temperature/speed normal
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input8
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input9
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
loop: module loaded
EXT4-fs (dm-2): mounted filesystem with ordered data mode
EXT4-fs (dm-3): mounted filesystem with ordered data mode
iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:09:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] TV-16: set mode NTSC 480i 0
[drm] TV-16: set mode NTSC 480i 0
[drm] TV-16: set mode NTSC 480i 0
[drm] TV-16: set mode NTSC 480i 0
CE: hpet increasing min_delta_ns to 15000 nsec
eth0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 22500 nsec
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:09:00.0: PME# enabled
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:09:00.0: PME# enabled
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
usb 5-1: USB disconnect, address 2
usb 5-1: new low speed USB device using uhci_hcd and address 3
usb 5-1: configuration #1 chosen from 1 choice
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input13
generic-usb 0003:046D:C025.0002: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
usb 5-1: USB disconnect, address 3
usb 5-1: new low speed USB device using uhci_hcd and address 4
usb 5-1: configuration #1 chosen from 1 choice
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input14
generic-usb 0003:046D:C025.0003: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
Machine check events logged
CE: hpet increasing min_delta_ns to 33750 nsec
input input14: event field not found
input input14: event field not found
usb 5-1: USB disconnect, address 4
usb 5-1: new low speed USB device using uhci_hcd and address 5
usb 5-1: configuration #1 chosen from 1 choice
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input15
generic-usb 0003:046D:C025.0004: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
ps -Af
# ps -Af
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 Mar29 ? 00:00:00 init [5]
root 2 0 0 Mar29 ? 00:00:00 [kthreadd]
root 3 2 0 Mar29 ? 00:00:00 [migration/0]
root 4 2 0 Mar29 ? 00:00:00 [ksoftirqd/0]
root 5 2 0 Mar29 ? 00:00:00 [watchdog/0]
root 6 2 0 Mar29 ? 00:00:00 [migration/1]
root 7 2 0 Mar29 ? 00:00:00 [ksoftirqd/1]
root 8 2 0 Mar29 ? 00:00:00 [watchdog/1]
root 9 2 0 Mar29 ? 00:00:00 [events/0]
root 10 2 0 Mar29 ? 00:00:00 [events/1]
root 11 2 0 Mar29 ? 00:00:00 [khelper]
root 12 2 0 Mar29 ? 00:00:00 [async/mgr]
root 13 2 0 Mar29 ? 00:00:00 [pm]
root 14 2 0 Mar29 ? 00:00:00 [sync_supers]
root 15 2 0 Mar29 ? 00:00:00 [bdi-default]
root 16 2 0 Mar29 ? 00:00:00 [kblockd/0]
root 17 2 0 Mar29 ? 00:00:00 [kblockd/1]
root 18 2 0 Mar29 ? 00:00:00 [kacpid]
root 19 2 0 Mar29 ? 00:00:00 [kacpi_notify]
root 20 2 0 Mar29 ? 00:00:00 [kacpi_hotplug]
root 21 2 0 Mar29 ? 00:00:00 [kseriod]
root 24 2 0 Mar29 ? 00:00:00 [khungtaskd]
root 25 2 0 Mar29 ? 00:00:00 [kswapd0]
root 26 2 0 Mar29 ? 00:00:00 [ksmd]
root 27 2 0 Mar29 ? 00:00:00 [aio/0]
root 28 2 0 Mar29 ? 00:00:00 [aio/1]
root 29 2 0 Mar29 ? 00:00:00 [crypto/0]
root 30 2 0 Mar29 ? 00:00:00 [crypto/1]
root 732 2 0 Mar29 ? 00:00:01 [ata/0]
root 771 2 0 Mar29 ? 00:00:00 [ata/1]
root 800 2 0 Mar29 ? 00:00:00 [ata_aux]
root 836 2 0 Mar29 ? 00:00:02 [scsi_eh_0]
root 884 2 0 Mar29 ? 00:00:00 [scsi_eh_1]
root 930 2 0 Mar29 ? 00:00:00 [scsi_eh_2]
root 931 2 0 Mar29 ? 00:00:00 [scsi_eh_3]
root 968 2 0 Mar29 ? 00:00:00 [kstriped]
root 971 2 0 Mar29 ? 00:00:00 [kdmflush]
root 974 2 0 Mar29 ? 00:00:00 [kdmflush]
root 977 2 0 Mar29 ? 00:00:00 [kdmflush]
root 980 2 0 Mar29 ? 00:00:00 [kdmflush]
root 1014 2 0 Mar29 ? 00:00:00 [kdmflush]
root 1015 2 0 Mar29 ? 00:00:01 [kcryptd_io]
root 1016 2 2 Mar29 ? 00:01:10 [kcryptd]
root 1025 2 0 Mar29 ? 00:00:00 [jbd2/dm-4-8]
root 1026 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 1027 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 1060 1 0 Mar29 ? 00:00:00 /sbin/udevd --daemon
root 1591 2 0 Mar29 ? 00:00:01 [flush-254:4]
root 1747 2 0 Mar29 ? 00:00:00 [kondemand/0]
root 1795 2 0 Mar29 ? 00:00:00 [kondemand/1]
root 1920 2 0 Mar29 ? 00:00:00 [kconservative/0]
root 1961 2 0 Mar29 ? 00:00:00 [kconservative/1]
root 2168 2 0 Mar29 ? 00:00:00 [kpsmoused]
root 2563 2 0 Mar29 ? 00:00:00 [ksuspend_usbd]
root 2591 2 0 Mar29 ? 00:00:00 [khubd]
root 2961 2 0 Mar29 ? 00:00:00 [i915/0]
root 2962 2 0 Mar29 ? 00:00:00 [i915/1]
root 2974 2 0 Mar29 ? 00:00:00 [pccardd]
root 2996 2 0 Mar29 ? 00:00:00 [iwl3945]
root 3004 2 0 Mar29 ? 00:00:01 [phy0]
root 3073 2 0 Mar29 ? 00:00:00 [usbhid_resumer]
root 3336 2 0 Mar29 ? 00:00:00 [hd-audio0]
root 4143 2 0 Mar29 ? 00:00:00 [kdmflush]
root 4144 2 0 Mar29 ? 00:00:00 [kcryptd_io]
root 4145 2 0 Mar29 ? 00:00:00 [kcryptd]
root 4170 2 0 Mar29 ? 00:00:00 [jbd2/dm-2-8]
root 4171 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 4172 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 4173 2 0 Mar29 ? 00:00:00 [jbd2/dm-3-8]
root 4174 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 4175 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 4180 1 0 Mar29 ? 00:00:00 /sbin/mount.ntfs-3g /dev/sda1 /mnt/win -o rw,noexec,nosuid,nodev,users,uid=1001,gid=100,fmask=0113,dmask=000
root 4448 1 0 Mar29 ? 00:00:00 supervising syslog-ng
root 4449 4448 0 Mar29 ? 00:00:00 /usr/sbin/syslog-ng
root 4458 1 0 Mar29 ? 00:00:00 /usr/sbin/acpid
dbus 4472 1 1 Mar29 ? 00:00:27 /usr/bin/dbus-daemon --system
hal 4475 1 0 Mar29 ? 00:00:04 /usr/sbin/hald
root 4476 4475 0 Mar29 ? 00:00:00 hald-runner
root 4504 4476 0 Mar29 ? 00:00:00 hald-addon-input: Listening on /dev/input/event4 /dev/input/event3 /dev/input/event9 /dev/input/event8 /dev/
root 4508 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-rfkill-killswitch
root 4520 4476 0 Mar29 ? 00:00:03 hald-addon-storage: polling /dev/sr0 (every 2 sec)
root 4521 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-cpufreq
hal 4522 4476 0 Mar29 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
root 4851 1 0 Mar29 ? 00:00:00 /usr/sbin/crond -S -l info
root 4863 1 1 Mar29 ? 00:00:37 /usr/bin/python -O /usr/share/wicd/daemon/wicd-daemon.py
ntp 4877 1 0 Mar29 ? 00:00:00 /usr/sbin/ntpd -s
root 4894 4863 0 Mar29 ? 00:00:25 /usr/bin/python -O /usr/share/wicd/daemon/monitor.py
mpd 4908 1 0 Mar29 ? 00:00:00 /usr/bin/mpd /etc/mpd.conf
root 4916 1 0 Mar29 ? 00:00:00 truecrypt -t -k /etc/dropboxkey --protect-hidden=no --password= --fs-options=umask=0002,uid=dropbox,gid=drop
root 4918 1 0 Mar29 ? 00:00:00 truecrypt -t -k /etc/dropboxkey --protect-hidden=no --password= --fs-options=umask=0002,uid=dropbox,gid=drop
root 4925 2 0 Mar29 ? 00:00:00 [loop0]
root 4928 2 0 Mar29 ? 00:00:00 [kdmflush]
root 4929 2 0 Mar29 ? 00:00:00 [kcryptd_io]
root 4930 2 0 Mar29 ? 00:00:00 [kcryptd]
root 4947 1 0 Mar29 tty1 00:00:00 /sbin/agetty 38400 tty1 linux
root 4948 1 0 Mar29 tty2 00:00:00 /sbin/agetty 38400 tty2 linux
root 4949 1 0 Mar29 tty3 00:00:00 /sbin/agetty 38400 tty3 linux
root 4950 1 0 Mar29 tty6 00:00:00 /bin/login -f
zed 4951 4950 0 Mar29 tty6 00:00:00 -bash
zed 4993 4951 0 Mar29 tty6 00:00:00 /bin/sh /usr/bin/startx
zed 5010 4993 0 Mar29 tty6 00:00:00 xinit /home/zed/.xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /tmp/serverauth.LXTS3D7lp0
root 5011 5010 10 Mar29 tty4 00:04:27 /usr/bin/X -nolisten tcp
zed 5020 5010 0 Mar29 tty6 00:00:00 ck-launch-session openbox-session
root 5022 1 0 Mar29 ? 00:00:00 /usr/sbin/console-kit-daemon --no-daemon
zed 5095 5020 0 Mar29 tty6 00:00:03 /usr/bin/openbox
zed 5099 5095 0 Mar29 tty6 00:00:00 gnome-session
root 5106 1 0 Mar29 ? 00:00:00 /usr/sbin/ntpd -s
zed 5109 1 0 Mar29 ? 00:00:00 /usr/bin/ssh-agent
zed 5113 1 0 Mar29 tty6 00:00:00 dbus-launch --exit-with-session gnome-session
zed 5114 1 0 Mar29 ? 00:00:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
root 5118 1 0 Mar29 ? 00:00:00 /usr/lib/DeviceKit/devkit-power-daemon
zed 5122 1 0 Mar29 ? 00:00:00 /usr/lib/GConf/gconfd-2
zed 5140 1 0 Mar29 tty6 00:00:00 gnome-keyring-daemon --start
zed 5142 5099 0 Mar29 tty6 00:00:06 gnome-panel
zed 5152 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfsd
zed 5157 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs//gvfs-fuse-daemon /home/zed/.gvfs
zed 5161 5099 0 Mar29 tty6 00:00:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon
zed 5162 5099 0 Mar29 tty6 00:00:08 /usr/bin/python -O /usr/share/wicd/gtk/wicd-client.py
zed 5163 5099 0 Mar29 tty6 00:00:00 /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
zed 5165 1 0 Mar29 ? 00:00:00 /usr/lib/bonobo/bonobo-activation-server --ac-activate --ior-output-fd=18
root 5167 1 0 Mar29 ? 00:00:00 /usr/lib/polkit-1/polkitd
root 5170 1 0 Mar29 ? 00:00:00 /usr/lib/DeviceKit/devkit-disks-daemon
root 5171 5170 0 Mar29 ? 00:00:02 devkit-disks-daemon: polling /dev/sr0
zed 5188 1 0 Mar29 ? 00:00:01 /usr/lib/gnome-applets/mixer_applet2 --oaf-activate-iid=OAFIID:GNOME_MixerApplet_Factory --oaf-ior-fd=18
zed 5190 1 0 Mar29 ? 00:00:00 /usr/lib/gnome-panel/notification-area-applet --oaf-activate-iid=OAFIID:GNOME_NotificationAreaApplet_Factory
zed 5192 1 0 Mar29 ? 00:00:00 /usr/lib/gnome-applets/battstat-applet-2 --oaf-activate-iid=OAFIID:GNOME_BattstatApplet_Factory --oaf-ior-fd
zed 5200 1 0 Mar29 ? 00:00:18 /usr/lib/gnome-panel/wnck-applet --oaf-activate-iid=OAFIID:GNOME_Wncklet_Factory --oaf-ior-fd=19
zed 5202 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor
zed 5208 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor
zed 5215 1 0 Mar29 ? 00:00:03 python /usr/lib/hamster-applet/hamster-applet --oaf-activate-iid=OAFIID:Hamster_Applet_Factory --oaf-ior-fd=
zed 5218 1 0 Mar29 ? 00:00:01 /usr/lib/gnome-panel/clock-applet --oaf-activate-iid=OAFIID:GNOME_ClockApplet_Factory --oaf-ior-fd=32
zed 5236 1 0 Mar29 ? 00:00:00 /usr/lib/evolution-data-server-1.2/evolution-data-server-2.28 --oaf-activate-iid=OAFIID:GNOME_Evolution_Data
root 5257 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-leds
root 5270 4863 0 Mar29 ? 00:00:00 [dhcpcd] <defunct>
root 5291 1 0 Mar29 ? 00:00:00 /sbin/dhcpcd eth0 -h tortuga
zed 5295 5095 0 Mar29 tty6 00:00:02 urxvt -fn -*-terminus-medium-*-*-*-16-*-*-*-*-*-iso8859-2 -e sudo su -
root 5297 5295 0 Mar29 pts/0 00:00:00 su -
root 5299 5297 0 Mar29 pts/0 00:00:06 -bash
zed 5364 5095 16 Mar29 tty6 00:07:00 /usr/lib/chromium/chromium
zed 5365 5364 0 Mar29 tty6 00:00:18 /usr/lib/chromium/chromium
zed 5366 5364 0 Mar29 tty6 00:00:00 /usr/lib/chromium/chromium --type=zygote
zed 5390 5366 0 Mar29 tty6 00:00:03 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
zed 5395 5366 0 Mar29 tty6 00:00:04 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
zed 5406 5366 0 Mar29 tty6 00:00:06 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
zed 5411 5366 0 Mar29 tty6 00:00:04 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
zed 5479 5366 7 Mar29 tty6 00:03:10 /usr/lib/chromium/chromium --type=renderer --lang=en-US --force-fieldtest=CacheSize/CacheSizeGroup_3/DnsImpa
dropbox 5492 1 0 Mar29 ? 00:00:10 /home/dropbox/.dropbox-dist/dropbox
zed 5543 1 0 Mar29 ? 00:00:00 kdeinit4: kdeinit4 Running...
zed 5545 5543 0 Mar29 ? 00:00:00 kdeinit4: klauncher [kdeinit] --fd=8
zed 5548 1 0 Mar29 ? 00:00:02 kdeinit4: kded4 [kdeinit]
zed 5562 5543 0 Mar29 ? 00:00:00 kdeinit4: kio_file [kdeinit] file local:/tmp
zed 5567 1 0 Mar29 ? 00:00:01 /usr/bin/knotify4
root 5572 1060 0 Mar29 ? 00:00:00 /sbin/udevd --daemon
zed 5717 1 0 Mar29 ? 00:00:00 /usr/lib/gamin/gam_server
zed 6126 5366 2 Mar29 tty6 00:00:28 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=CacheSize/CacheSizeGroup_3/DnsImp
root 6459 1 0 Mar29 ? 00:00:00 /usr/lib/sa/sadc -F -L -S DISK 600 6 -
root 6518 1060 0 00:01 ? 00:00:00 /sbin/udevd --daemon
root 6804 2 0 00:10 ? 00:00:00 [flush-254:6]
root 6807 5299 0 00:10 pts/0 00:00:00 ps -Af
Edit: typo
Edit2: I found the source of slowness - removing vboxdrv module restores system performance. How to get VirtualBox working I will try to solve somewhere else.
Last edited by stabele (2010-03-30 20:40:52)sand_man wrote:X is running at 25% cpu on average
Your's and mine problems are probably not connected, I had low CPU utilization from all sources (including X), but system was dead slow anyway. -
SAP HANA Lifecycle Manager Couldn't deploy using credentials
Hello,
After HLM 1.0.7.7 upgrade from 1.0.6 on IBM appliance we could not apply support packages in normal mode. When we launch the Upgrade process from Hana Studio or Command line we recive the following message:
Error Message: Execution of 'Deploys SAP Host Agent configurations using sidadm credentials' failed.
Detailed Message: null or empty argument
Help: http://help.sap.com/hana
We tried to downdgrade and reinstall HLM again with no luck. Users, Parsswords and Certificates was also renewed. We could read this log from HLM.
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Submit for subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_GetUpdateTypeTask]
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Submit for subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_GetUpdateTypeTask]
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Starting execution of subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_DeployConfigWithSidAdmTask]
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Starting execution of subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_DeployConfigWithSidAdmTask]
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor
Starting process [Deploys SAP Host Agent configurations using sidadm credentials, com.sap.lm.hana.hlm.update.slpp.task.deployconfig.DeployConfigWithSidAdmTask] ({})...
INFO 2014-05-08 16:05:15 com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor
Starting process [Deploys SAP Host Agent configurations using sidadm credentials, com.sap.lm.hana.hlm.update.slpp.task.deployconfig.DeployConfigWithSidAdmTask] ({})...
INFO 2014-05-08 16:05:15 com.sap.lm.util.status.StatusTracker
Status tracker initialized using storage file /usr/sap/hlm_bootstraps/HNB/HLM/param/configdeploystatus.properties.
INFO 2014-05-08 16:05:15 com.sap.lm.util.status.StatusTracker
Status tracker initialized using storage file /usr/sap/hlm_bootstraps/HNB/HLM/param/configdeploystatus.properties.
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.context.ProgressObserverAdapter
Progress [ 0%]
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.context.ProgressObserverAdapter
Progress [ 0%]
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.task.deployconfig.AbstractDeployConfigProcessExecutor
Deploying SAP Host Agent configurations on host with sidadm credentials.
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.task.deployconfig.AbstractDeployConfigProcessExecutor
Deploying SAP Host Agent configurations on host with sidadm credentials.
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.context.ProgressObserverAdapter
Process message: Deploying SAP Host Agent configurations on host
INFO 2014-05-08 16:05:15 com.sap.lm.hana.hlm.update.slpp.context.ProgressObserverAdapter
Process message: Deploying SAP Host Agent configurations on host
INFO 2014-05-08 16:05:16 com.sap.lm.services.hostcontrol.SAPHostControlService
Deployed Host Agent configurations [/usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sedm-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-home-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-load-controller-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sda-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdbstudio-deliveryunit.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/newdb-studio-repository-postupdate-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-sda-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-server.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-executable.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/newdb-studio-repository-postupdate.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hdb-plugin-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-load-controller.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/change-newdb-client-installation-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-executable-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-load-controller-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/exists-path.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/gen-hdbstudio-deliveryunit.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/change-newdb-studio-repository-installation-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-nzdm.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hdb-plugin.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-installation-number.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-load-controller.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-installation-number-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-server-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hostagent-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hostagent.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-hdbeuspack.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-studio-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/chmod-file.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-home.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sedm.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/exists-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-v2.conf] with signature /usr/sap/hlm_bootstraps/HNB/HLM/SIGNATURE.SMF on host .
INFO 2014-05-08 16:05:16 com.sap.lm.services.hostcontrol.SAPHostControlService
Deployed Host Agent configurations [/usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sedm-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-home-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-load-controller-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sda-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdbstudio-deliveryunit.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/newdb-studio-repository-postupdate-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-sda-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-server.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-executable.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/newdb-studio-repository-postupdate.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hdb-plugin-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-load-controller.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/change-newdb-client-installation-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-studio-repository-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-executable-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-load-controller-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/exists-path.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/gen-hdbstudio-deliveryunit.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/change-newdb-studio-repository-installation-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-nzdm.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hdb-plugin.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-installation-number.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-load-controller.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-installation-number-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-hdb-plugin-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-server-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/updatehostagent-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-repository.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-repository-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hostagent-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-hostagent.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-hdbeuspack.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-server-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-newdb-studio-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/chmod-file.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-client.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/find-java-home.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/detect-sedm.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/install-newdb-studio-repository-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/exists-path-v2.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/update-newdb-client-v3.conf, /usr/sap/hlm_bootstraps/HNB/HLM/operations.d/uninstall-newdb-studio-v2.conf] with signature /usr/sap/hlm_bootstraps/HNB/HLM/SIGNATURE.SMF on host .
ERROR 2014-05-08 16:05:16 com.sap.lm.hana.hlm.update.slpp.task.AbstractUpdateProcessExecutor
Process executor failed
java.lang.IllegalArgumentException: null or empty argument
at com.sap.lm.hlm.common.runtime.HlmRuntime.assertNotNullOrEmptyArgumens(HlmRuntime.java:342)
at com.sap.lm.hlm.common.runtime.HlmRuntime.deployHlmExecutableScripts(HlmRuntime.java:74)
at com.sap.lm.hlm.common.runtime.HlmRuntime.deployHlmExecutableScripts(HlmRuntime.java:69)
at com.sap.lm.hana.hlm.update.slpp.task.deployconfig.AbstractDeployConfigProcessExecutor.deployconfigurations(AbstractDeployConfigProcessExecutor.java:114)
at com.sap.lm.hana.hlm.update.slpp.task.deployconfig.DeployConfigWithSidAdmProcessExecutor.executeInternal(DeployConfigWithSidAdmProcessExecutor.java:42)
at com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor.startInterruptibleExecution(AbstractProcessExecutor.java:128)
at com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor$1.run(AbstractProcessExecutor.java:108)
ERROR 2014-05-08 16:05:16 com.sap.lm.hana.hlm.update.slpp.task.AbstractUpdateProcessExecutor
Process executor failed
java.lang.IllegalArgumentException: null or empty argument
at com.sap.lm.hlm.common.runtime.HlmRuntime.assertNotNullOrEmptyArgumens(HlmRuntime.java:342)
at com.sap.lm.hlm.common.runtime.HlmRuntime.deployHlmExecutableScripts(HlmRuntime.java:74)
at com.sap.lm.hlm.common.runtime.HlmRuntime.deployHlmExecutableScripts(HlmRuntime.java:69)
at com.sap.lm.hana.hlm.update.slpp.task.deployconfig.AbstractDeployConfigProcessExecutor.deployconfigurations(AbstractDeployConfigProcessExecutor.java:114)
at com.sap.lm.hana.hlm.update.slpp.task.deployconfig.DeployConfigWithSidAdmProcessExecutor.executeInternal(DeployConfigWithSidAdmProcessExecutor.java:42)
at com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor.startInterruptibleExecution(AbstractProcessExecutor.java:128)
at com.sap.lm.hlm.common.tasks.process.AbstractProcessExecutor$1.run(AbstractProcessExecutor.java:108)
ERROR 2014-05-08 16:05:16 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Execution of subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_DeployConfigWithSidAdmTask, Execution of 'Deploys SAP Host Agent configurations using sidadm credentials' failed.] has failed: {}
ERROR 2014-05-08 16:05:16 com.sap.lm.hlm.common.wizard.process.WizardProcessExecutor
Execution of subtask with ID [6cd61e09-eb68-4448-86c0-b4319abbdc3f_DeployConfigWithSidAdmTask, Execution of 'Deploys SAP Host Agent configurations using sidadm credentials' failed.] has failed: {}
Could you please help us with this issue?
Kind Regards,
Message was edited by: Tom FlanaganHi Alston,
I'm sorry for the late reply. Are you still experiencing this error?
I've seen this issue before with another customer and the final resolution was to make sure the /etc/hosts file does not have the ipv6 BEFORE ipv4. Here is an example:
>> cat /etc/hosts
# special IPv6 addresses
::1 localhost ipv6-localhost
ipv6-loopback
ff02::3 ipv6-allhosts
192.168.180.31 abceccd01.sap.com abceccd01
192.168.180.34 abceccs01.sap.com abceccs01
192.168.180.35 abccrms01.sap.com abccrms01
192.168.180.30 abceccs01.sap.com abceccs01
10.36.10.5 abceccs01-nfs.sap.com abceccs01-nfs
The resolution would be to change the ordering. So the IPv6 section appears below the IPv4 section.
After that is done, perform the following to "reset" HLM.
1. Stop all browsers that have HLM pages open
2. Stop the Studio
3. Execute /usr/sap/hlm_bootstraps/<SID>/HLM/stop-hlm.sh –f
4. Check that there are no any left HLM processes
5. Go to /usr/sap/hlm_bootstraps/<SID>/HLM/param/
and rename all files except logging.properties
6. go to directory: /usr/sap/hlm_bootstraps/<SID>/HLM
and rename directory persistence
7 restart SAP Host Agent - as root: /usr/sap/hostctrl/exe/saphostexec
-restart
8. open HLM ui via browser:
https://<hostname>:1129/lmsl/HLM/<SID>/ui/
I hope this helps.
Best Regards,
Jimmy -
BOE XI R2 - Configuring RAS with Service user, RAS Fails to start...
Colleagues:
Where would kbase article c2018785 be found?
I am configuring my BOE XI R2 to use End-to-End SSO via IIS using this document from Business Objects:
Link: [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403cdf46-c63e-2b10-2997-978cb8ba59f0]
In this document, you create a service user under which certain applications run, including the Report Application Server.
There is a specific note on page 6 in the doc which states:
The RAS server may fail to start under this new service account. If you experience this issue, follow the steps outlined in the following kbase:
Link: [http://support.businessobjects.com/library/kbase/articles/c2018785.asp]
Unfortunately, the link is out of date, and I have not found the article using the existing search tools.
I did use the -trace argument to the command line to start up the RAS service, and the output is follows:
Timestamp ProcessID ThreadID Message
[Thu May 07 13:21:39 2009] 4448 4228 (.ashwin32service.cpp:165): trace message: RAS starting
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2039): CDTSApp::InitInstance(): In CDTSParameters::RUN
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2055): CDTSApp::InitInstance(): Starting server. Process Id=4448
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2062): CDTSApp::InitInstance(): setServerParameters() done
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2130): CDTSApp::InitInstance(): initLicenseLimit() returns 1
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3895): CDTSApp::loadServerOptions(): about to SaveToRegistryAsDefault
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3897): CDTSApp::loadServerOptions(): done SaveToRegistryAsDefault hr=-2147024891
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3916): CDTSApp::loadServerOptions(): error Access is denied.
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2134): CDTSApp::InitInstance(): loadServerOptions() returns 0
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2194): CDTSApp::InitInstance(): getDataEngineName() returns C:TrouxBusiness Objectscommon3.5 incrpe32.dll
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2197): CDTSApp::InitInstance(): openEngine() returns 0
[Thu May 07 13:21:39 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2292): CDTSApp::InitInstance(): preloadMSXML() done
[Thu May 07 13:21:39 2009] 4448 4228 trace message: EnCOMSessionMgr::EnCOMSessionMgr begins...
[Thu May 07 13:21:39 2009] 4448 4228 trace message: EnCOMSessionMgr::EnCOMSessionMgr trying to get Singleton SessionManager.
[Thu May 07 13:21:39 2009] 4448 4228 trace message: CInfoSessionManager::Initialize start
[Thu May 07 13:21:39 2009] 4448 4228 trace message: CInfoSessionManager::Initialize, start the cluster refresh thread
[Thu May 07 13:21:40 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2445): CDTSApp::InitInstance(): caught UNKNOWN EXCEPTION!!!
[Thu May 07 13:21:40 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2461): CDTSApp::InitInstance() returns 0
[Thu May 07 13:21:40 2009] 4448 4228 (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:1039): CAgentMapMT::ShutDown - outstanding agents:
[Thu May 07 13:21:40 2009] 4448 4228 (.ashwin32service.cpp:329): trace message: RAS Exiting: return code = 0
In the Windows event viewer, this error is echoed:
Failed to load Report Application Server settings from the system registry.
Detailed Message: Access is denied.
It seems my service account needs a certain permission to be able to load and read the registry for this application, and I'm sure this permission is discussed in the missing kbase article.
Could you please let me know what permission is required for this user on the OS? This is Win2003 x64 SP2.
Thanks, and have a good dayHi,
if this a permissions problem then just start +regedit*, go to
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
select it, press the right mouse button and choose Permissions. Press the advanced button and assign your service account with full control at this point of the registry. Do not forget to select the +Replace Permissions Entries on all child objects ... + option.
You can also take a look at Notes 1199630 and 1201489 (this one is for CR 10 but it may be worth it to follow the instructions there) ( [https://service.sap.com/notes])
Regards,
Stratos -
[Solved]Synaptics Touchpad not working at all on Fujitsu Siemens UH552
Hi,
I have just installed Arch on my Fujitsu Siemens UH552 laptop. Everything works except for the touchpad which seems to get loaded by Xorg, but when in X it doesn't work. I have tried both using /dev/input/event* and /dev/input/mouse0 as device paths, neither works.
xf86-input-evdev and xf86-input-synaptics are installed.
I have tried running both with the default 10-evdev.conf, with 10-synaptics.conf, with both, and without both.
TLDR SOLUTION: https://bbs.archlinux.org/viewtopic.php … 3#p1189603
My current 10-synaptics.conf:
Section "InputClass"
Identifier "Touchpad Catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg.0.log
[ 2275.127]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2275.130] X Protocol Version 11, Revision 0
[ 2275.131] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 2275.132] Current Operating System: Linux corvo 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 2275.132] Kernel command line: root=/dev/sda2 rootflags=subvol=__active ro initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
[ 2275.134] Build Date: 27 August 2012 08:04:39AM
[ 2275.135]
[ 2275.136] Current version of pixman: 0.26.2
[ 2275.138] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2275.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2275.142] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 13:16:01 2012
[ 2275.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2275.144] (==) No Layout section. Using the first Screen section.
[ 2275.144] (==) No screen section available. Using defaults.
[ 2275.144] (**) |-->Screen "Default Screen Section" (0)
[ 2275.144] (**) | |-->Monitor "<default monitor>"
[ 2275.144] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2275.144] (**) | |-->Device "Intel Graphics"
[ 2275.144] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2275.144] (==) Automatically adding devices
[ 2275.144] (==) Automatically enabling devices
[ 2275.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2275.144] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2275.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2275.144] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2275.144] (II) Loader magic: 0x7c8b00
[ 2275.144] (II) Module ABI versions:
[ 2275.144] X.Org ANSI C Emulation: 0.4
[ 2275.144] X.Org Video Driver: 12.1
[ 2275.144] X.Org XInput driver : 16.0
[ 2275.144] X.Org Server Extension : 6.0
[ 2275.144] (--) PCI:*(0:0:2:0) 8086:0166:10cf:16c2 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00002000/64
[ 2275.144] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2275.144] (II) LoadModule: "extmod"
[ 2275.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2275.145] (II) Module extmod: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension MIT-SCREEN-SAVER
[ 2275.145] (II) Loading extension XFree86-VidModeExtension
[ 2275.145] (II) Loading extension XFree86-DGA
[ 2275.145] (II) Loading extension DPMS
[ 2275.145] (II) Loading extension XVideo
[ 2275.145] (II) Loading extension XVideo-MotionCompensation
[ 2275.145] (II) Loading extension X-Resource
[ 2275.145] (II) LoadModule: "dbe"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2275.145] (II) Module dbe: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DOUBLE-BUFFER
[ 2275.145] (II) LoadModule: "glx"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2275.145] (II) Module glx: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (==) AIGLX enabled
[ 2275.145] (II) Loading extension GLX
[ 2275.145] (II) LoadModule: "record"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2275.145] (II) Module record: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.13.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension RECORD
[ 2275.145] (II) LoadModule: "dri"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2275.145] (II) Module dri: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension XFree86-DRI
[ 2275.145] (II) LoadModule: "dri2"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.145] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.2.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DRI2
[ 2275.145] (II) LoadModule: "intel"
[ 2275.146] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2275.146] (II) Module intel: vendor="X.Org Foundation"
[ 2275.146] compiled for 1.12.3.901, module version = 2.20.5
[ 2275.146] Module class: X.Org Video Driver
[ 2275.146] ABI class: X.Org Video Driver, version 12.1
[ 2275.146] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
[ 2275.146] (--) using VT number 7
[ 2275.149] drmOpenDevice: node name is /dev/dri/card0
[ 2275.149] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 7
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 8
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2275.150] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2275.150] (==) intel(0): RGB weight 888
[ 2275.150] (==) intel(0): Default visual is TrueColor
[ 2275.150] (**) intel(0): Option "AccelMethod" "sna"
[ 2275.150] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 2275.151] (**) intel(0): Framebuffer tiled
[ 2275.151] (**) intel(0): Pixmaps tiled
[ 2275.151] (**) intel(0): 3D buffers tiled
[ 2275.151] (**) intel(0): Throttling enabled
[ 2275.151] (**) intel(0): Delayed flush enabled
[ 2275.151] (**) intel(0): "Tear free" disabled
[ 2275.151] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2275.151] (II) intel(0): Output LVDS1 has no monitor section
[ 2275.152] (II) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 2275.152] (II) intel(0): Output VGA1 has no monitor section
[ 2275.153] (II) intel(0): Output HDMI1 has no monitor section
[ 2275.193] (II) intel(0): Output DP1 has no monitor section
[ 2275.193] (II) intel(0): EDID for output LVDS1
[ 2275.193] (II) intel(0): Manufacturer: LGD Model: 371 Serial#: 0
[ 2275.193] (II) intel(0): Year: 2012 Week: 0
[ 2275.193] (II) intel(0): EDID Version: 1.3
[ 2275.193] (II) intel(0): Digital Display Input
[ 2275.193] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 2275.193] (II) intel(0): Gamma: 2.20
[ 2275.193] (II) intel(0): No DPMS capabilities specified
[ 2275.193] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2275.193] (II) intel(0): First detailed timing is preferred mode
[ 2275.193] (II) intel(0): redX: 0.589 redY: 0.347 greenX: 0.343 greenY: 0.555
[ 2275.193] (II) intel(0): blueX: 0.160 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 2275.193] (II) intel(0): Manufacturer's mask: 0
[ 2275.193] (II) intel(0): Supported detailed timing:
[ 2275.193] (II) intel(0): clock: 70.0 MHz Image Size: 293 x 165 mm
[ 2275.193] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1438 h_blank_end 1476 h_border: 0
[ 2275.193] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 780 v_blanking: 790 v_border: 0
[ 2275.193] (II) intel(0): LG Display
[ 2275.193] (II) intel(0): LP133WH2-TLF1
[ 2275.193] (II) intel(0): EDID (in hex):
[ 2275.193] (II) intel(0): 00ffffffffffff0030e4710300000000
[ 2275.193] (II) intel(0): 00160103801d10780afc359658578e29
[ 2275.193] (II) intel(0): 1f505400000001010101010101010101
[ 2275.193] (II) intel(0): 010101010101581b566e500016302424
[ 2275.194] (II) intel(0): 480025a5100000190000000000000000
[ 2275.194] (II) intel(0): 00000000000000000000000000fe004c
[ 2275.194] (II) intel(0): 4720446973706c61790a2020000000fe
[ 2275.194] (II) intel(0): 004c503133335748322d544c463100ce
[ 2275.194] (II) intel(0): EDID vendor "LGD", prod id 881
[ 2275.194] (II) intel(0): Printing DDC gathered Modelines:
[ 2275.194] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Printing probed modes for output LVDS1
[ 2275.194] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2275.194] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2275.194] (II) intel(0): EDID for output VGA1
[ 2275.195] (II) intel(0): EDID for output HDMI1
[ 2275.236] (II) intel(0): EDID for output DP1
[ 2275.236] (II) intel(0): Output LVDS1 connected
[ 2275.236] (II) intel(0): Output VGA1 disconnected
[ 2275.236] (II) intel(0): Output HDMI1 disconnected
[ 2275.236] (II) intel(0): Output DP1 disconnected
[ 2275.236] (II) intel(0): Using exact sizes for initial modes
[ 2275.236] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 2275.236] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2275.236] (**) intel(0): Display dimensions: (290, 160) mm
[ 2275.236] (**) intel(0): DPI set to (119, 121)
[ 2275.236] (II) Loading sub module "dri2"
[ 2275.236] (II) LoadModule: "dri2"
[ 2275.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.237] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.237] compiled for 1.12.4, module version = 1.2.0
[ 2275.237] ABI class: X.Org Server Extension, version 6.0
[ 2275.237] (==) Depth 24 pixmap format is 32 bpp
[ 2275.237] (II) intel(0): SNA initialized with IvyBridge backend
[ 2275.237] (==) intel(0): Backing store disabled
[ 2275.237] (==) intel(0): Silken mouse enabled
[ 2275.237] (II) intel(0): HW Cursor enabled
[ 2275.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2275.238] (==) intel(0): DPMS enabled
[ 2275.239] (II) intel(0): [DRI2] Setup complete
[ 2275.239] (II) intel(0): [DRI2] DRI driver: i965
[ 2275.239] (II) intel(0): direct rendering: DRI2 Enabled
[ 2275.239] (==) intel(0): hotplug detection: "enabled"
[ 2275.239] (--) RandR disabled
[ 2275.239] (II) Initializing built-in extension Generic Event Extension
[ 2275.239] (II) Initializing built-in extension SHAPE
[ 2275.239] (II) Initializing built-in extension MIT-SHM
[ 2275.239] (II) Initializing built-in extension XInputExtension
[ 2275.239] (II) Initializing built-in extension XTEST
[ 2275.239] (II) Initializing built-in extension BIG-REQUESTS
[ 2275.239] (II) Initializing built-in extension SYNC
[ 2275.239] (II) Initializing built-in extension XKEYBOARD
[ 2275.239] (II) Initializing built-in extension XC-MISC
[ 2275.239] (II) Initializing built-in extension SECURITY
[ 2275.239] (II) Initializing built-in extension XINERAMA
[ 2275.239] (II) Initializing built-in extension XFIXES
[ 2275.239] (II) Initializing built-in extension RENDER
[ 2275.239] (II) Initializing built-in extension RANDR
[ 2275.239] (II) Initializing built-in extension COMPOSITE
[ 2275.239] (II) Initializing built-in extension DAMAGE
[ 2275.250] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2275.250] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2275.250] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2275.250] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2275.250] (II) AIGLX: Loaded and initialized i965
[ 2275.250] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2275.251] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 2275.276] (II) intel(0): Setting screen physical size to 361 x 203
[ 2275.319] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2275.319] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.319] (II) LoadModule: "evdev"
[ 2275.319] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2275.320] (II) Module evdev: vendor="X.Org Foundation"
[ 2275.320] compiled for 1.12.3.901, module version = 2.7.3
[ 2275.320] Module class: X.Org XInput Driver
[ 2275.320] ABI class: X.Org XInput driver, version 16.0
[ 2275.320] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.320] (**) Power Button: always reports core events
[ 2275.320] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 2275.320] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.320] (--) evdev: Power Button: Found keys
[ 2275.320] (II) evdev: Power Button: Configuring as keyboard
[ 2275.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 2275.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2275.320] (**) Option "xkb_rules" "evdev"
[ 2275.320] (**) Option "xkb_model" "evdev"
[ 2275.320] (**) Option "xkb_layout" "se"
[ 2275.355] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event3)
[ 2275.356] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 2275.356] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
[ 2275.356] (**) Fujitsu FUJ02E3: always reports core events
[ 2275.356] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event3"
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Found keys
[ 2275.356] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
[ 2275.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input3/event3"
[ 2275.356] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
[ 2275.356] (**) Option "xkb_rules" "evdev"
[ 2275.356] (**) Option "xkb_model" "evdev"
[ 2275.356] (**) Option "xkb_layout" "se"
[ 2275.357] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 2275.357] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2275.357] (II) Using input driver 'evdev' for 'Video Bus'
[ 2275.357] (**) Video Bus: always reports core events
[ 2275.357] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 2275.357] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2275.357] (--) evdev: Video Bus: Found keys
[ 2275.357] (II) evdev: Video Bus: Configuring as keyboard
[ 2275.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 2275.357] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2275.358] (**) Option "xkb_rules" "evdev"
[ 2275.358] (**) Option "xkb_model" "evdev"
[ 2275.358] (**) Option "xkb_layout" "se"
[ 2275.359] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event2)
[ 2275.359] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[ 2275.359] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
[ 2275.359] (**) Fujitsu FUJ02B1: always reports core events
[ 2275.359] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event2"
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Found keys
[ 2275.359] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
[ 2275.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input2/event2"
[ 2275.359] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9)
[ 2275.359] (**) Option "xkb_rules" "evdev"
[ 2275.359] (**) Option "xkb_model" "evdev"
[ 2275.359] (**) Option "xkb_layout" "se"
[ 2275.360] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 2275.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.360] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.360] (**) Power Button: always reports core events
[ 2275.360] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 2275.360] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.360] (--) evdev: Power Button: Found keys
[ 2275.360] (II) evdev: Power Button: Configuring as keyboard
[ 2275.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 2275.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 2275.361] (**) Option "xkb_rules" "evdev"
[ 2275.361] (**) Option "xkb_model" "evdev"
[ 2275.361] (**) Option "xkb_layout" "se"
[ 2275.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 2275.362] (II) No input driver specified, ignoring this device.
[ 2275.362] (II) This device may have been added with another device file.
[ 2275.362] (II) config/udev: Adding input device FJ Camera (/dev/input/event7)
[ 2275.362] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
[ 2275.362] (II) Using input driver 'evdev' for 'FJ Camera'
[ 2275.362] (**) FJ Camera: always reports core events
[ 2275.362] (**) evdev: FJ Camera: Device: "/dev/input/event7"
[ 2275.363] (--) evdev: FJ Camera: Vendor 0x10f1 Product 0x1a44
[ 2275.363] (--) evdev: FJ Camera: Found keys
[ 2275.363] (II) evdev: FJ Camera: Configuring as keyboard
[ 2275.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input7/event7"
[ 2275.363] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11)
[ 2275.363] (**) Option "xkb_rules" "evdev"
[ 2275.363] (**) Option "xkb_model" "evdev"
[ 2275.363] (**) Option "xkb_layout" "se"
[ 2275.364] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.364] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 2275.365] (II) No input driver specified, ignoring this device.
[ 2275.365] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2275.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2275.365] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2275.366] (**) AT Translated Set 2 keyboard: always reports core events
[ 2275.366] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2275.366] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2275.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2275.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 2275.366] (**) Option "xkb_rules" "evdev"
[ 2275.366] (**) Option "xkb_model" "evdev"
[ 2275.366] (**) Option "xkb_layout" "se"
[ 2275.366] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 2275.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad Catchall"
[ 2275.366] (II) LoadModule: "synaptics"
[ 2275.366] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2275.367] (II) Module synaptics: vendor="X.Org Foundation"
[ 2275.367] compiled for 1.12.2, module version = 1.6.2
[ 2275.367] Module class: X.Org XInput Driver
[ 2275.367] ABI class: X.Org XInput driver, version 16.0
[ 2275.367] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "Device" "/dev/input/event8"
[ 2275.367] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2275.367] (**) Option "TapButton1" "1"
[ 2275.367] (**) Option "TapButton2" "2"
[ 2275.367] (**) Option "TapButton3" "3"
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 2275.368] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2275.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.368] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
[ 2275.368] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Fujitsu FUJ02E3 id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Fujitsu FUJ02B1 id=9 [slave keyboard (3)]
↳ Power Button id=10 [slave keyboard (3)]
↳ FJ Camera id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
running
dmesg | grep -i synaptics
doesn't show anything. However running
dmesg | grep -i psmouse
returns a lot of
psmouse serio1: bad data from KBC - timeout
Last edited by flako (2012-11-08 09:44:59)I have tried doing that with both linux mint, and now fedora live usb. Neither one loads the touchpad correctly. So yeah, our problems weren't really related
Anyway, I tried looking into the
psmouse serio1: bad data from KBC - timeout
messages, and tried running psmouse proto (defined in /etc/modprobe.conf/psmouse.conf) as both raw and imps as per https://answers.launchpad.net/ubuntu/+s … ion/206950 Unfortunately, that didn't solve anything. Using the raw setting meant that the touchpad wasn't loaded at all (as in not appearing in the Xorg.log at all).
The laptop is quite new, but at the same time what i figured from the touchpad vendor & product ID, the touchpad itself isn't. So it should technically work. Before installing arch i booted into windows to see if everything worked, and found no issues with the touchpad. So I have ruled out any hardware errors. Maybe its just the Fn-key that doesn't work yet in Linux? But that doesn't explain the "psmouse serio1: bad data from KBC - timeout" Any pointers to where I should look/ what commands I should run to delve deeper into this issue?
Last edited by flako (2012-09-09 12:10:51) -
[SOLVED] Error when starting awesome WM.
I'm not sure if this should go here or in Workstation User, so sorry if I got it wrong. When I try to startx with "exec awesome &" in my .xinitrc I get an "expected keysym, got XF86Info: line 914 of inet" error. Someone suggested that it could be my keybindings in my rc.lua for awesome but I tried someone else's rc.lua and still got it.
Error Log
xauth: creating new authority file /home/tim/.serverauth.27451
X.Org X Server 1.5.0
Release Date:
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH i686
Current Operating System: Linux tim-laptop 2.6.26-ARCH #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008 i686
Build Date: 06 September 2008 05:03:06PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 20 11:49:21 2008
(==) Using config file: "/etc/X11/xorg.conf"
expected keysym, got XF86Info: line 914 of inet
expected keysym, got XF86Info: line 914 of inet
expected keysym, got XF86Info: line 914 of inet
waiting for X server to shut down .
Xorg.log
X.Org X Server 1.5.0
Release Date:
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH i686
Current Operating System: Linux tim-laptop 2.6.26-ARCH #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008 i686
Build Date: 06 September 2008 05:03:06PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 20 11:49:21 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d5660
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0300000/0, 0xc0000000/0, 0xd0400000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0380000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 0.15.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 2.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 2.4.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "exa"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0300000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 49152
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 49152
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xd0300000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 304 x 190
(II) Synaptics touchpad driver version 0.15.2
(--) Mouse0 auto-dev sets device to /dev/input/event8
(II) Mouse0: x-axis range 1472 - 5472
(II) Mouse0: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event8"
(**) Option "SHMConfig" "true"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(--) Mouse0 touchpad found
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: TOUCHPAD)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: x-axis range 1472 - 5472
(II) Mouse0: y-axis range 1408 - 4448
(--) Mouse0 touchpad found
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 0.15.2
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(**) Option "Device" "/dev/input/event8"
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) UnloadModule: "synaptics"
(II) UnloadModule: "kbd"
(II) UnloadModule: "synaptics"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xf8acb000 at 0xb7a29000
(II) intel(0): [drm] Closed DRM master.
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "glx"
# Load "record"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "synaptics"
Load "xtrap"
Load "freetype"
Load "evdev"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse0"
Option "Device" "/dev/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0030"
Option "SHMConfig" "true"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 1280 800 # mm
Identifier "Monitor0"
VendorName "LPL"
ModelName "c000"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "AccelMethod" "exa"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
.xinitrc
#!/bin/sh
exec openbox-session
#ivman &
#exec awesome &
#/usr/lib/wicd/wicd-client.py &
#xterm -bg black -fg white
rc.lua
-- GGLucas' Awesome-3 Lua Config :D
-- Version 2
-- This config is for use with awesome 3.0.
-- If you have any suggestions or questions, feel free
-- to pass me a message, find me in #awesome on OFTC, or
-- email me at <lucas[at]glacicle.com>
-- I use both wicked and eminent, so to use it,
-- you'll need to get both those helper libraries too.
-- Note that I use all-custom keybindings, so you might
-- want to copy the default rc.lua's keybindings
-- into here if you wish to use those, although you might
-- find you like mine better :P
---- {{{ Require lua libraries
-- Shipped with awesome
require("awful")
require("beautiful")
-- External
require("wicked") -- Widgets
require("eminent") -- Dynamic tagging
---- {{{ 'Beautiful' theme settings
-- Font
beautiful.font = "Terminus 8"
-- Background
beautiful.bg_normal = '#22222222'
beautiful.bg_focus = '#285577'
beautiful.bg_sbfocus = '#11335565'
beautiful.bg_urgent = '#A10000'
-- Foreground
beautiful.fg_normal = '#999999'
beautiful.fg_focus = '#ffffff'
beautiful.fg_urgent = '#ffffff'
-- Border
beautiful.border_width = 2
beautiful.border_normal = '#333333'
beautiful.border_focus = '#4C7899'
beautiful.border_marked = '#91231c'
---- {{{ Modkeys
key = {}
key.none = {}
key.alt = {"Mod1"}
key.super = {"Mod4"}
key.shift = {"Shift"}
key.control = {"Control"}
key.super_alt = {key.super[1], key.alt[1]}
key.super_shift = {key.super[1], key.shift[1]}
key.super_control = {key.super[1], key.control[1]}
key.control_alt = {key.control[1], key.alt[1]}
key.shift_alt = {key.shift[1], key.alt[1]}
---- {{{ Settings
-- Initialise tables
settings = {}
settings.widget = {}
settings.apps = {}
settings.tag = {}
settings.bindings = {}
-- {{{ General
-- Widget spacer and separator
settings.widget_spacer = " "
settings.widget_separator = " "
-- Warp mouse
settings.warp_mouse = true
-- New become master
settings.new_become_master = false
-- Tag mwfact
settings.tag.mwfact = 0.618033988769
-- {{{ Applications
-- Terminal application
settings.apps.terminal = 'xterm'
-- Terminal with gnu screen
settings.apps.gnu_screen = settings.apps.terminal..' -e zsh -c "exec screen -x main"'
-- Terminal with gnu screen over ssh to my main machine
settings.apps.gnu_screen_ssh_desktop = settings.apps.terminal..' -e zsh -c "ssh -t me.glacicle.com screen -x main"'
-- Terminal with gnu screen over ssh to my vps server
settings.apps.gnu_screen_ssh_server = settings.apps.terminal..' -e zsh -c "ssh -t glacicle.com screen -x"'
-- Command to lock the screen
settings.apps.lock_screen = 'xscreensaver-command -lock'
-- Command to turn screen off with DPMS
settings.apps.screen_off = 'sleep 1; xset dpms force off'
-- File manager application
settings.apps.filemanager = settings.apps.terminal..' -e zsh -c "vifm %s"'
-- Toggle music
-- Note: mpdtoggle is my own script for finding out if
-- I want to toggle or play/stop, replace it with mpc if
-- you wish to use it.
settings.apps.music_toggle = "mpdtoggle toggle"
-- {{{ Floating windows
settings.floating = {
["gimp"] = true,
["urxvtcnotify"] = true,
-- {{{ Other
-- Check what widget mode to use
if io.open(os.getenv("HOME").."/.laptop_mode") then
-- Special file exists, display widgets I want
-- on my laptop
settings.widget_mode = 'laptop'
else
settings.widget_mode = 'desktop'
end
-- Highlight statusbar of focussed screen on multiple-monitor setups
if screen.count() > 1 then
settings.statusbar_highlight_focus = {true, 1}
end
---- {{{ Keybindings
-- Initialise table
settings.bindings.wm = {}
settings.bindings.mouse = {}
-- {{{ Open the filemanager at specific locations
settings.bindings.filemanager = {
-- Data partition
["/data"] = {key.alt, "d"},
-- Data partition on desktop pc from laptop (sshfs mount)
["/desktop/data"] = {key.shift_alt, "d"},
-- Home Directory
[os.getenv("HOME")] = {key.alt, "a"},
-- {{{ Run specific commands
settings.bindings.commands = {
-- Open Terminal
[settings.apps.terminal] = {key.alt, "q"},
-- GNU Screen
[settings.apps.gnu_screen] = {key.super, "k"},
-- GNU Screen over SSH to Desktop
[settings.apps.gnu_screen_ssh_desktop] = {key.super_shift, "k"},
-- GNU Screen over SSH to VPS
[settings.apps.gnu_screen_ssh_server] = {key.super_alt, "k"},
-- Lock screen
[settings.apps.lock_screen] = {key.super, "l"},
-- Screen off with DPMS
[settings.apps.screen_off] = {key.super, "o"},
-- Toggle music
[settings.apps.music_toggle] = {key.alt, "e"},
-- {{{ Client keybindings
settings.bindings.wm.client = {
-- Alt+`: Close window
[function() client.focus:kill() end] = {key.alt, "#49"},
-- Mod+q: Focus previous window
[function() awful.client.focusbyidx(-1) end] = {key.super, "q"},
-- Mod+w: Focus next window
[function() awful.client.focusbyidx(1) end] = {key.super, "w"},
-- Mod+Shift+q: Swap with previous window
[function() awful.client.swap(-1) end] = {key.super_shift, "q"},
-- Mod+Shift+w: Swap with previous window
[function() awful.client.swap(1) end] = {key.super_shift, "w"},
-- Mod+c: Toggle floating
[awful.client.togglefloating] = {key.super, "c"},
-- Mod+\: Make window master
[function() local c = awful.client.master(); if c ~= client.focus then c:swap(client.focus) end end] =
{key.super, "#51"},
-- Mod+Shift+a: Move window to previous tag
[function () awful.client.movetotag(eminent.tag.getprev(mouse.screen)) end] =
{key.super_shift, "a"},
-- Mod+Shift+s: Move window to next tag
[function () awful.client.movetotag(eminent.tag.getnext(mouse.screen)) end] =
{key.super_shift, "s"},
-- Mod+Shift+e: Move window to next screen
[function () s = client.focus.screen+1; if s > screen.count() then s = 1 end; client.focus.screen = s end] =
{key.super_shift, "e"},
-- Mod+Shift+d: Move window to previous screen
[function () s = client.focus.screen-1; if s < 1 then s = screen.count() end; client.focus.screen = s end] =
{key.super_shift, "d"},
-- {{{ Tag bindings
settings.bindings.wm.tag = {
-- Mod+a: Switch to previous tag
[function() eminent.tag.prev(mouse.screen) end] = {key.super, "a"},
-- Mod+s: Switch to next tag
[function() eminent.tag.next(mouse.screen) end] = {key.super, "s"},
-- Alt+\: Switch to float layout
[function() awful.layout.set('floating') end] = {key.alt, "#51"},
-- Alt+z: Switch to max layout
[function() awful.layout.set('max') end] = {key.alt, "z"},
-- Alt+x: Switch to tile layout
[function() awful.layout.set('tile') end] = {key.alt, "x"},
-- {{{ Prompt bindings
settings.bindings.prompt = {
-- Alt+w: Run prompt
[{awful.spawn, " Run: "}] = {key.alt, "w"},
-- Mod+Alt+w: Lua eval prompt
[{awful.eval, " Run Lua: "}] = {key.super_alt, "w"},
-- {{{ Miscellaneous bindings
settings.bindings.wm.misc = {
-- Mod+Alt+r: Restart awesome
[awesome.restart] = {key.super_alt, "r"},
-- Mod+e: Switch focus to next screen
[function() awful.screen.focus(1) end] = {key.super, "e"},
-- Mod+d: Switch focus to previous screen
[function() awful.screen.focus(-1) end] = {key.super, "d"},
-- {{{ Keyboard digit bindings
settings.bindings.digits = {
-- Mod+##: View tag
[awful.tag.viewonly] = key.super,
-- Mod+Shift+##: Toggle tag view
[function(t) t.selected = not t.selected end] = key.super_shift,
-- Mod+Control+##: Move window to tag
[awful.client.movetotag] = key.super_control,
-- Mod+Alt+##: Toggle window on tag
[awful.client.toggletag] = key.super_alt,
-- {{{ Mouse bindings
settings.bindings.mouse.desktop = {
-- Right click on desktop: Open terminal
[function() awful.spawn(settings.apps.terminal) end] = {key.none, 3},
settings.bindings.mouse.client = {
-- Alt+Left: Move window
[function(c) c:mouse_move() end] = {key.alt, 1},
-- Alt+Right: Resize window
[function(c) c:mouse_resize({corner="bottomright"}) end] = {key.alt, 3},
---- {{{ Markup helper functions
-- Inline markup is a tad ugly, so use these functions
-- to dynamically create markup, we hook them into
-- the beautiful namespace for clarity.
beautiful.markup = {}
function beautiful.markup.bg(color, text)
return '<bg color="'..color..'" />'..text
end
function beautiful.markup.fg(color, text)
return '<span color="'..color..'">'..text..'</span>'
end
function beautiful.markup.font(font, text)
return '<span font_desc="'..font..'">'..text..'</span>'
end
function beautiful.markup.title(t)
return t
end
function beautiful.markup.title_normal(t)
return beautiful.title(t)
end
function beautiful.markup.title_focus(t)
return beautiful.markup.bg(beautiful.bg_focus, beautiful.markup.fg(beautiful.fg_focus, beautiful.markup.title(t)))
end
function beautiful.markup.title_urgent(t)
return beautiful.markup.bg(beautiful.bg_urgent, beautiful.markup.fg(beautiful.fg_urgent, beautiful.markup.title(t)))
end
function beautiful.markup.bold(text)
return '<b>'..text..'</b>'
end
function beautiful.markup.heading(text)
return beautiful.markup.fg(beautiful.fg_focus, beautiful.markup.bold(text))
end
---- {{{ Widgets
settings.statusbars = {}
settings.widgets = {}
settings.statusbars[1] = {{
position = "top",
height = 18,
fg = beautiful.fg_normal,
bg = beautiful.bg_normal,
name = "mainstatusbar",
}, "all"}
settings.promptbar = {
position = "top",
height = 18,
fg = beautiful.fg_normal,
bg = beautiful.bg_normal,
name = "promptbar",
-- {{{ Taglist
maintaglist = widget({
type = 'taglist',
name = 'maintaglist'
function maintaglist.label(t)
return awful.widget.taglist.label.noempty(t)
end
maintaglist:mouse_add(mouse(key.none, 1, function (o, t) awful.tag.viewonly(t) end))
table.insert(settings.widgets, {1, maintaglist})
if settings.widget_mode == 'laptop' or settings.widget_mode == 'all' then
-- {{{ Battery Widget
batterywidget = widget({
type = 'textbox',
name = 'batterywidget',
align = 'right'
function read_battery_temp(format)
local f = io.open('/tmp/battery-temp')
if f == nil then
return {'n/a'}
end
local n = f:read()
if n == nil then
f:close()
return {'n/a'}
end
return {awful.escape(n)}
end
wicked.register(batterywidget, read_battery_temp,
settings.widget_spacer..beautiful.markup.heading('Battery')..': $1'..settings.widget_spacer..settings.widget_separator,
30)
-- Start timer to read the temp file
awful.hooks.timer.register(28, function ()
-- Call battery script to get batt%
command = "battery"
os.execute(command..' > /tmp/battery-temp &')
end, true)
table.insert(settings.widgets, {1, batterywidget})
end
if settings.widget_mode ~= 'none' then
-- {{{ MPD Widget
mpdwidget = widget({
type = 'textbox',
name = 'mpdwidget',
align = 'right'
wicked.register(mpdwidget, wicked.widgets.mpd, function (widget, args)
-- I don't want the stream name on my statusbar, so I gsub it out,
-- feel free to remove this bit
return settings.widget_spacer..beautiful.markup.heading('MPD')..': '
..args[1]:gsub('AnimeNfo Radio | Serving you the best Anime music!: ','')
..settings.widget_spacer..settings.widget_separator end)
table.insert(settings.widgets, {1, mpdwidget})
-- {{{ GMail Widget
gmailwidget = widget({
type = 'textbox',
name = 'gmailwidget',
align = 'right'
gmailwidget:mouse_add(mouse(key.none, 1, function () wicked.update(gmailwidget) end))
function read_gmail_temp(format)
local f = io.open('/tmp/gmail-temp')
if f == nil then
return {'n/a'}
end
local n = f:read()
if n == nil or f == ' ' or f == '' then
f:close()
return {'n/a'}
end
return {n}
end
wicked.register(gmailwidget, read_gmail_temp, function (widget, args)
local n = args[1]
local out = settings.widget_spacer..beautiful.markup.heading('GMail')..': '
if n ~= "n/a" and tonumber(n) > 0 then
out = out..beautiful.markup.bg(beautiful.bg_urgent, beautiful.markup.fg(beautiful.fg_urgent, tostring(n)))
else
out = out..tostring(n)
end
out = out..settings.widget_spacer..settings.widget_separator
return out
end, 120)
-- Start timer to fill the temp file
awful.hooks.timer.register(110, function ()
-- Call GMail check script to check for new email
os.execute(os.getenv("HOME")..'/other/.gmail.py > /tmp/gmail-temp &')
end, true)
wicked.update(gmailwidget)
table.insert(settings.widgets, {1, gmailwidget})
-- {{{ Load Averages Widget
loadwidget = widget({
type = 'textbox',
name = 'loadwidget',
align = 'right'
function widget_loadavg(format)
-- Use /proc/loadavg to get the average system load on 1, 5 and 15 minute intervals
local f = io.open('/proc/loadavg')
local n = f:read()
f:close()
-- Find the third space
local pos = n:find(' ', n:find(' ', n:find(' ')+1)+1)
return {n:sub(1,pos-1)}
end
wicked.register(loadwidget, widget_loadavg,
settings.widget_spacer..beautiful.markup.heading('Load')..': $1'..settings.widget_spacer..settings.widget_separator, 2)
table.insert(settings.widgets, {1, loadwidget})
-- {{{ CPU Usage Widget
cputextwidget = widget({
type = 'textbox',
name = 'cputextwidget',
align = 'right'
wicked.register(cputextwidget, wicked.widgets.cpu,
settings.widget_spacer..beautiful.markup.heading('CPU')..': $1%'..settings.widget_spacer..settings.widget_separator,
nil, nil, 2)
table.insert(settings.widgets, {1, cputextwidget})
-- {{{ CPU Graph Widget
cpugraphwidget = widget({
type = 'graph',
name = 'cpugraphwidget',
align = 'right'
cpugraphwidget.height = 0.85
cpugraphwidget.width = 45
cpugraphwidget.bg = '#333333'
cpugraphwidget.border_color = '#0a0a0a'
cpugraphwidget.grow = 'left'
cpugraphwidget:plot_properties_set('cpu', {
fg = '#AEC6D8',
fg_center = '#285577',
fg_end = '#285577',
vertical_gradient = false
wicked.register(cpugraphwidget, wicked.widgets.cpu, '$1', 1, 'cpu')
table.insert(settings.widgets, {1, cpugraphwidget})
-- {{{ Memory Usage Widget
memtextwidget = widget({
type = 'textbox',
name = 'memtextwidget',
align = 'right'
wicked.register(memtextwidget, wicked.widgets.mem,
settings.widget_spacer..beautiful.markup.heading('MEM')..': '..
'$1% ($2/$3)'..settings.widget_spacer..settings.widget_separator,
3, nil, {2, 4, 4})
table.insert(settings.widgets, {1, memtextwidget})
-- {{{ Memory Graph Widget
memgraphwidget = widget({
type = 'graph',
name = 'memgraphwidget',
align = 'right'
memgraphwidget.height = 0.85
memgraphwidget.width = 45
memgraphwidget.bg = '#333333'
memgraphwidget.border_color = '#0a0a0a'
memgraphwidget.grow = 'left'
memgraphwidget:plot_properties_set('mem', {
fg = '#AEC6D8',
fg_center = '#285577',
fg_end = '#285577',
vertical_gradient = false
wicked.register(memgraphwidget, wicked.widgets.mem, '$1', 1, 'mem')
table.insert(settings.widgets, {1, memgraphwidget})
-- {{{ Other Widget
settings.widget_spacerwidget = widget({ type = 'textbox', name = 'settings.widget_spacerwidget', align = 'right' })
settings.widget_spacerwidget.text = settings.widget_spacer..settings.widget_separator
table.insert(settings.widgets, {1, settings.widget_spacerwidget})
end
-- You shouldn't have to edit the code after this,
-- it takes care of applying the settings above.
---- {{{ Initialisations
-- Register beautiful with awful
awful.beautiful.register(beautiful)
-- Set default colors
awesome.colors_set({
fg = beautiful.fg_normal,
bg = beautiful.bg_normal })
-- Set default font
awesome.font_set(beautiful.font)
-- Pre-create new tags with eminent
for s=1, screen.count() do
eminent.newtag(s, 5)
end
---- {{{ Create statusbars
local mainstatusbar = {}
for i, b in pairs(settings.statusbars) do
mainstatusbar[i] = {}
for s=1,screen.count() do
this_screen = false
if b[2] ~= "all" then
for sc in pairs(b[2]) do
if sc == s then
this_screen = true
break
end
end
end
if b[2] == "all" or this_screen then
mainstatusbar[i][s] = statusbar(b[1])
local widgets = {}
for ii, w in pairs(settings.widgets) do
if w[1] == i then
table.insert(widgets, w[2])
end
end
mainstatusbar[i][s]:widgets(widgets)
mainstatusbar[i][s].screen = s
end
end
end
---- {{{ Create prompt statusbar
local mainpromptbar = statusbar(settings.promptbar)
local mainpromptbox = widget({type = "textbox", align = "left", name = "mainpromptbox"})
mainpromptbar:widgets({mainpromptbox})
mainpromptbar.screen = nil
---- {{{ Useful functions
-- {{{ Mouse warp function
function mouse_warp(c, force)
-- Allow skipping a warp
if warp_skip then
warp_skip = false
return
end
-- Get vars
local sel = c or client.focus
if sel == nil then return end
local coords = sel:coords()
local m = mouse.coords()
-- Settings
mouse_padd = 6
border_area = 5
-- Check if mouse is not already inside the window
if (( m.x < coords.x-border_area or
m.y < coords.y-border_area or
m.x > coords.x+coords.width+border_area or
m.y > coords.y+coords.height+border_area
) and (
table.maxn(m.buttons) == 0
)) or force
then
mouse.coords({ x=coords.x+mouse_padd, y=coords.y+mouse_padd})
end
end
-- {{{ Prompt with statusbar
function prompt_statusbar(s, callback, prompt)
if not callback then callback = awful.spawn end
if not prompt then prompt = " Run: " end
for i, b in pairs(mainstatusbar) do
for ii, bb in pairs(b) do
if bb.screen == s then
bb.screen = nil
end
end
end
mainpromptbar.screen = s
awful.prompt.run({prompt = prompt}, mainpromptbox, callback,
awful.completion.bash, os.getenv("HOME") .. "/.cache/awesome_history", 50, function ()
mainpromptbar.screen = nil
for i, b in pairs(mainstatusbar) do
for ii, bb in pairs(b) do
if ii == s then
bb.screen = ii
end
end
end
end)
end
---- {{{ Create bindings
--- This reads the binding tables and turns them into actual keybindings
-- WM Bindings
for i,table in pairs(settings.bindings.wm) do
for f, keys in pairs(table) do
keybinding(keys[1], keys[2], f):add()
end
end
-- Keyboard digit bindings
for i=1,9 do
for f, mod in pairs(settings.bindings.digits) do
keybinding(mod, i, function()
t = eminent.tag.getn(i, nil, true)
if not t then return end
f(t)
end):add()
end
end
-- Prompt Bindings
for prompt, keys in pairs(settings.bindings.prompt) do
keybinding(keys[1], keys[2], function() prompt_statusbar(mouse.screen, unpack(prompt)) end):add()
end
-- Filemanager bindings
for loc, keys in pairs(settings.bindings.filemanager) do
keybinding(keys[1], keys[2], function() awful.spawn(string.format(settings.apps.filemanager, loc)) end):add()
end
-- Custom command bindings
for command, keys in pairs(settings.bindings.commands) do
keybinding(keys[1], keys[2], function() awful.spawn(command) end):add()
end
-- Desktop mouse bindings
for f, keys in pairs(settings.bindings.mouse.desktop) do
awesome.mouse_add(mouse(keys[1], keys[2], f))
end
---- {{{ Set hooks
-- {{{ Focus hook
awful.hooks.focus.register(function (c)
-- Skip over my urxvtcnotify
if c.name and c.name:lower():find('urxvtcnotify') and awful.client.next(1) ~= c then
awful.client.focusbyidx(1)
return
end
-- Set border
c.border_color = beautiful.border_focus
-- Raise the client
c:raise()
-- Set statusbar color
if settings.statusbar_highlight_focus and settings.statusbar_highlight_focus[1] then
if last_screen == nil or last_screen ~= c.screen then
mainstatusbar[settings.statusbar_highlight_focus[2]][c.screen].bg = beautiful.bg_sbfocus
if last_screen then
mainstatusbar[settings.statusbar_highlight_focus[2]][last_screen].bg = beautiful.bg_normal
end
end
last_screen = c.screen
end
end)
-- {{{ Unfocus hook
awful.hooks.unfocus.register(function (c)
-- Set border
c.border_color = beautiful.border_normal
end)
-- {{{ Mouseover hook
awful.hooks.mouseover.register(function (c)
-- Set focus for sloppy focus
client.focus = c
end)
-- {{{ Manage hook
awful.hooks.manage.register(function (c)
local class = ""
local name = ""
if c.class then
class = c.class:lower()
end
if c.name then
name = c.name:lower()
end
-- Create border
c.border_width = beautiful.border_width
c.border_color = beautiful.border_normal
-- Add mouse bindings
for f, keys in pairs(settings.bindings.mouse.client) do
c:mouse_add(mouse(keys[1], keys[2], f))
end
-- Check if floating
for app, i in pairs(settings.floating) do
if class:find(app) or name:find(app) then
c.floating = i
break
end
end
if name:find('urxvtcnotify') then
-- I got sick of libnotify/notification-daemon
-- and their dependencies, so I'm using a little
-- urxvtc window with some text in it as notifications :P
-- This makes it appear at the correct place,
-- feel free to remove the whole section, you probably
-- won't need it.
c.screen = 3
c:coords({
x = 1680*2+1400,
y = 18,
width = 276,
height = 106
c.border_color = beautiful.border_normal
local tags = {}
for i,t in pairs(eminent.tags[3]) do
if eminent.tag.isoccupied(3, t) then
table.insert(tags, t)
end
end
c:tags(tags)
return 0
end
-- Focus new clients
client.focus = c
-- Prevent new windows from becoming master
if not settings.new_become_master then
awful.client.swap(1, c)
end
-- Don't honor size hints
c.honorsizehints = false
end)
-- {{{ Arrange hook
awful.hooks.arrange.register(function(s)
-- Warp the mouse
if settings.warp_mouse then
mouse_warp()
end
-- Check focus
if not client.focus then
local c = awful.client.focus.history.get(s, 0)
if c then client.focus = c end
end
end)
-- vim: set filetype=lua fdm=marker tabstop=4 shiftwidth=4 expandtab smarttab autoindent smartindent nu:
Last edited by Tim Fox (2008-09-20 18:15:15)andre.ramaciotti wrote:And I'm not sure if you should put that & after exec awesome. It works fine here without it.
No & after entries in .xinitrc . You've commented out the awesome entry. -
Multiple issues with trying to standalone Compiz(driving me nuts)
All right. This is going to be one long post.
I'm trying to achieve a standalone Compiz session as inspiring by the thread "HOWTO standalone Compiz" and I want to achieve automatic login through either a login manager (gdm kdm slim) or the inittab tweak. I would prefer the login manager method.
Issue 1: if I try the method on the wiki, gdm looks for an Xclient script, which is completely vague. I've created .Xclient, and set it to exec start-fusion.sh, but that just crashes X.
I've tried creating a fusion.desktop file in /usr/share/xsessions to point to start-fusion.sh, but that crashes it as well.
I've tried the inittab method and tried to point it to startx, but that just crashed X again.
SLiM doesn't work. It just crashes. Neither does KDM.
Issue 2: The fonts in GDM are just so tiny. When I try to login from GDM through .Xclient, the fonts in the session are tiny as well. I've tried all the methods on the Xorg wiki, but none of them worked. I'm connecting my T61p to an external monitor.
Issue 3: I used to be able to let compiz set which desktop to open a certain application through "Put Window". Now I can't. In all cases I've had 6 desktops, 3 across 2 high. The windows don't listen anymore. I've tried using the class and the name of the application both, but none do it.
Would it actually be better to just do a fresh/squeak clean install of everything? It know it's not required, but would it help?
here's my xorg.conf for a reference:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Wed May 27 01:59:40 PDT 2009
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "glx"
Load "dbe"
#Load "dri"
Load "extmod"
#Load "dri2"
Load "ddc"
Load "i2c"
EndSection
Section "ServerFlags"
Option "Xinerama" "1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "dvorak"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "___ LCDTV14"
HorizSync 32.0 - 80.0
VertRefresh 56.0 - 75.0
DisplaySize 380 238 # 96 DPI @ 1440x900
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Quadro FX 570M"
Option "RenderAccel" "true"
Option "EnablePageFlip" "true"
Option "NoLogo" "true"
Option "AGPFastWrite" "true"
Option "NoDDC" "true"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro FX 570M"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: 1440x900 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
And my xorg.0.log
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux Breasgrapes 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64
Build Date: 03 August 2009 08:17:16PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 14 23:28:27 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "1"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:040c:17aa:20d9 nVidia Corporation Quadro FX 570M rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 185.18.14 Wed May 27 01:53:56 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 185.18.14 Wed May 27 01:30:19 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT: 1440x900 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro FX 570M (G84GL) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.84.51.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro FX 570M at PCI:1:0:0:
(--) NVIDIA(0): ___ LCDTV14 (CRT-0)
(--) NVIDIA(0): IBM (DFP-0)
(--) NVIDIA(0): ___ LCDTV14 (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): IBM (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): IBM (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(WW) NVIDIA(0): The EDID for ___ LCDTV14 (CRT-0) contradicts itself: mode
(WW) NVIDIA(0): "640x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (32.000-80.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (31.5 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "640x480".
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT:1440x900+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) NVIDIA(0): DPI set to (41, 45); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling
(WW) NVIDIA(0): UBB.
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "CRT:1440x900+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device ThinkPad Extra Buttons
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event11"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Comfort Curve Keyboard 2000
(**) Microsoft Comfort Curve Keyboard 2000: always reports core events
(**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event13"
(II) Microsoft Comfort Curve Keyboard 2000: Found 1 mouse buttons
(II) Microsoft Comfort Curve Keyboard 2000: Found scroll wheel(s)
(II) Microsoft Comfort Curve Keyboard 2000: Found keys
(II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
(II) Microsoft Comfort Curve Keyboard 2000: Adding scrollwheel support
(**) Microsoft Comfort Curve Keyboard 2000: YAxisMapping: buttons 4 and 5
(**) Microsoft Comfort Curve Keyboard 2000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Comfort Curve Keyboard 2000
(**) Microsoft Comfort Curve Keyboard 2000: always reports core events
(**) Microsoft Comfort Curve Keyboard 2000: Device: "/dev/input/event12"
(II) Microsoft Comfort Curve Keyboard 2000: Found keys
(II) Microsoft Comfort Curve Keyboard 2000: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Comfort Curve Keyboard 2000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by zephyrus17 (2009-08-14 14:59:35)so is this what happens to you ?
1) wipe the calendar on yur blackberry
2) sync the calendar with outlook
3) unplug the USB cord
4) do item 2) again
=> ou have all your events doubled ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Trouble with i810, vesa and fbdev being loaded
There are a few similar treads, but neither solves this problem. They are listed below:
http://bbs.archlinux.org/viewtopic.php?id=76933
http://bbs.archlinux.org/viewtopic.php?id=78686
http://bbs.archlinux.org/viewtopic.php?id=71622
I'm not using a xorg.conf, hal/dbus are running and I'm using the xf86-video-intel module. There are no other xf86-video-* modules present.
Below follows my xorg.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux svirfneblin 2.6.30-ARCH #1 SMP Tue Sep 8 01:42:10 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 8 12:43:46 2009
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a02:152d:0769 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a03:152d:0769 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default i810 Device 0"
Driver "i810"
EndSection
Section "Screen"
Identifier "Builtin Default i810 Screen 0"
Device "Builtin Default i810 Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default i810 Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event6"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "SHMConfig" "true"
(**) Option "MaxTapMove" "2000"
(**) Option "VertEdgeScroll" "true"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "CircularScrolling" "true"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event1"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) intel(0): EDID vendor "LPL", prod id 58112
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 58112
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 58112
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 58112
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
As you can see above it first loads the intel module and then goes on to try and load all the faulty ones. KDE still starts without any fuzz and I think gnome does too I am however trying to test XMonad out and it only goes into a black screen with a pointer, and when I terminate and it seems that this is to blame.
And when I terminate the Xmonad session with alt+shift+q xorg has outputted the following:
xauth: creating new authority file /home/vesz/.serverauth.1522
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux svirfneblin 2.6.30-ARCH #1 SMP Tue Sep 8 01:42:10 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 8 13:45:59 2009
(==) Using default built-in configuration (39 lines)
(EE) Failed to load module "i810" (module does not exist, 0)
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release.
FATAL: Module fbcon not found.
Setting master
waiting for X server to shut down Dropping master
Maybe fbcon to blame? or is that just something that is apart of fbdev. I am also using KMS with 'options i915 modeset=1' to get native resolution in console if that might have something to do with this.
Thanks, hope I didn't post too much worthless stuff
EDIT: This is the way xmonad works, I didn't load anything in config still I think all the failed module loads are rather annoying and would like to get rid of them if anyone knows how.
Last edited by vesz (2009-09-08 17:49:19)What is on the command line for your kernel in your grub configuration file? (/boot/grub/menu.lst)
For Intel chips, when using mode setting and drm, Intel provides its own frame buffer that is not compatible with any other frame buffer (VGA, VESA, NG, etc...)
Do not specify any video settings on the kernel command line. No video=... , No VGA= ..., nothing.
After the kernel loads, the Intel frame buffer should start about the same time as the first kernel modules get loaded. There is a good article at http://wiki.archlinux.org/index.php/Intel_Graphics
If the frame buffer doesn't start, see the bit about Early Start.
Good Luck
Edit:
After reading your problem more closely, I may have misunderstood. The problem with the black screen after logout is not the fault of trying to load the other, non-existent drivers. It is due to a bug in KDM. The black screen does not occur with GDM. (Personal Aside:Unfortunately I cannot abide the look of GDM)
As a work around, edit /usr/share/config/kdm/kdmrc and find the block labeled :
[X-:*-Core]
and add a line that reads:
TerminateServer=true
The black screen is preceded by an xorg-crash. The terminate-server causes KDM to kill any existing server at log out and start anew (originally this was to manage memory leaks)
Last edited by ewaller (2009-09-10 06:29:36) -
[solved] startx results in black screen -- no errors logged
Hi there.
I was setting my keyboard to be us_intl (as described here).
I added the following to ~/.fluxbox/startup:
setxkbmap us -variant intl &
Worked fine... but what I was wanting a different mapping so I changed it back to just US. Now when I run startx, I just get a blank screen. I didn't change anything else in any config file between when now and when it was working and I have changed that line back to what it reads above. No dice.
I turned on logging with fluxbox and the log is not being written to, so something pretty strange has gone wrong.
I see no errors in /var/log/Xorg.0.log, but here it is:
[ 1151.630]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 1151.710]
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 1151.733] X Protocol Version 11, Revision 0
[ 1151.751] Build Operating System: Linux 3.0.0-ARCH i686
[ 1151.776] Current Operating System: Linux robot-mk-ix 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686
[ 1151.778] Kernel command line: root=/dev/disk/by-uuid/b3d3f1ce-e707-444f-90d4-2e775bedd9df ro
[ 1151.797] Build Date: 08 August 2011 08:28:07AM
[ 1151.799]
[ 1151.818] Current version of pixman: 0.22.2
[ 1151.837] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1151.858] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1151.897] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 9 10:11:55 2011
[ 1151.899] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1151.918] (==) No Layout section. Using the first Screen section.
[ 1151.918] (==) No screen section available. Using defaults.
[ 1151.918] (**) |-->Screen "Default Screen Section" (0)
[ 1151.918] (**) | |-->Monitor "<default monitor>"
[ 1151.918] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1151.918] (==) Automatically adding devices
[ 1151.918] (==) Automatically enabling devices
[ 1151.918] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1151.918] Entry deleted from font path.
[ 1151.918] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1151.918] Entry deleted from font path.
[ 1151.918] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1151.918] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1151.918] Entry deleted from font path.
[ 1151.918] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1151.918] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1151.918] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1151.918] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1151.918] (II) Loader magic: 0x822e4e0
[ 1151.918] (II) Module ABI versions:
[ 1151.918] X.Org ANSI C Emulation: 0.4
[ 1151.918] X.Org Video Driver: 10.0
[ 1151.918] X.Org XInput driver : 12.2
[ 1151.918] X.Org Server Extension : 5.0
[ 1151.936] (--) PCI:*(0:0:2:0) 8086:27a2:107b:0366 rev 3, Mem @ 0xd8100000/524288, 0xc0000000/268435456, 0xd8200000/262144, I/O @ 0x00001800/8
[ 1151.936] (--) PCI: (0:0:2:1) 8086:27a6:107b:0366 rev 3, Mem @ 0xd8180000/524288
[ 1151.939] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1151.939] (II) LoadModule: "extmod"
[ 1151.940] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 1151.940] (II) Module extmod: vendor="X.Org Foundation"
[ 1151.940] compiled for 1.10.3.901, module version = 1.0.0
[ 1151.940] Module class: X.Org Server Extension
[ 1151.940] ABI class: X.Org Server Extension, version 5.0
[ 1151.940] (II) Loading extension MIT-SCREEN-SAVER
[ 1151.940] (II) Loading extension XFree86-VidModeExtension
[ 1151.940] (II) Loading extension XFree86-DGA
[ 1151.940] (II) Loading extension DPMS
[ 1151.940] (II) Loading extension XVideo
[ 1151.940] (II) Loading extension XVideo-MotionCompensation
[ 1151.940] (II) Loading extension X-Resource
[ 1151.940] (II) LoadModule: "dbe"
[ 1151.940] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 1151.940] (II) Module dbe: vendor="X.Org Foundation"
[ 1151.940] compiled for 1.10.3.901, module version = 1.0.0
[ 1151.940] Module class: X.Org Server Extension
[ 1151.940] ABI class: X.Org Server Extension, version 5.0
[ 1151.940] (II) Loading extension DOUBLE-BUFFER
[ 1151.940] (II) LoadModule: "glx"
[ 1151.940] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1151.940] (II) Module glx: vendor="X.Org Foundation"
[ 1151.940] compiled for 1.10.3.901, module version = 1.0.0
[ 1151.940] ABI class: X.Org Server Extension, version 5.0
[ 1151.940] (==) AIGLX enabled
[ 1151.940] (II) Loading extension GLX
[ 1151.940] (II) LoadModule: "record"
[ 1151.941] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 1151.941] (II) Module record: vendor="X.Org Foundation"
[ 1151.941] compiled for 1.10.3.901, module version = 1.13.0
[ 1151.941] Module class: X.Org Server Extension
[ 1151.941] ABI class: X.Org Server Extension, version 5.0
[ 1151.941] (II) Loading extension RECORD
[ 1151.941] (II) LoadModule: "dri"
[ 1151.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 1151.941] (II) Module dri: vendor="X.Org Foundation"
[ 1151.941] compiled for 1.10.3.901, module version = 1.0.0
[ 1151.941] ABI class: X.Org Server Extension, version 5.0
[ 1151.941] (II) Loading extension XFree86-DRI
[ 1151.941] (II) LoadModule: "dri2"
[ 1151.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1151.941] (II) Module dri2: vendor="X.Org Foundation"
[ 1151.941] compiled for 1.10.3.901, module version = 1.2.0
[ 1151.941] ABI class: X.Org Server Extension, version 5.0
[ 1151.941] (II) Loading extension DRI2
[ 1151.941] (==) Matched intel as autoconfigured driver 0
[ 1151.941] (==) Matched vesa as autoconfigured driver 1
[ 1151.941] (==) Matched fbdev as autoconfigured driver 2
[ 1151.941] (==) Assigned the driver to the xf86ConfigLayout
[ 1151.941] (II) LoadModule: "intel"
[ 1151.942] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1151.942] (II) Module intel: vendor="X.Org Foundation"
[ 1151.942] compiled for 1.10.2, module version = 2.15.0
[ 1151.942] Module class: X.Org Video Driver
[ 1151.942] ABI class: X.Org Video Driver, version 10.0
[ 1151.942] (II) LoadModule: "vesa"
[ 1151.942] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 1151.942] (II) Module vesa: vendor="X.Org Foundation"
[ 1151.942] compiled for 1.10.0, module version = 2.3.0
[ 1151.942] Module class: X.Org Video Driver
[ 1151.942] ABI class: X.Org Video Driver, version 10.0
[ 1151.942] (II) LoadModule: "fbdev"
[ 1151.959] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1151.959] (II) Module fbdev: vendor="X.Org Foundation"
[ 1151.959] compiled for 1.10.0, module version = 0.4.2
[ 1151.960] ABI class: X.Org Video Driver, version 10.0
[ 1151.960] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 1151.960] (II) VESA: driver for VESA chipsets: vesa
[ 1151.960] (II) FBDEV: driver for framebuffer: fbdev
[ 1151.960] (--) using VT number 7
[ 1151.973] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1151.973] (WW) Falling back to old probe method for vesa
[ 1151.973] (WW) Falling back to old probe method for fbdev
[ 1151.973] (II) Loading sub module "fbdevhw"
[ 1151.973] (II) LoadModule: "fbdevhw"
[ 1151.973] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1151.973] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1151.973] compiled for 1.10.3.901, module version = 0.0.2
[ 1151.973] ABI class: X.Org Video Driver, version 10.0
[ 1151.973] drmOpenDevice: node name is /dev/dri/card0
[ 1151.973] drmOpenDevice: open result is 11, (OK)
[ 1151.973] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 1151.973] drmOpenDevice: node name is /dev/dri/card0
[ 1151.974] drmOpenDevice: open result is 11, (OK)
[ 1151.974] drmOpenByBusid: drmOpenMinor returns 11
[ 1151.974] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 1151.974] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1151.974] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1151.974] (==) intel(0): RGB weight 888
[ 1151.974] (==) intel(0): Default visual is TrueColor
[ 1151.974] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 1151.974] (--) intel(0): Chipset: "945GM"
[ 1151.974] (**) intel(0): Relaxed fencing disabled
[ 1151.974] (**) intel(0): Framebuffer tiled
[ 1151.974] (**) intel(0): Pixmaps tiled
[ 1151.974] (**) intel(0): 3D buffers tiled
[ 1151.974] (**) intel(0): SwapBuffers wait enabled
[ 1151.974] (==) intel(0): video overlay key set to 0x101fe
[ 1151.974] (II) intel(0): Output LVDS1 has no monitor section
[ 1151.999] (II) intel(0): Output VGA1 has no monitor section
[ 1152.384] (II) intel(0): Output TV1 has no monitor section
[ 1152.384] (II) intel(0): EDID for output LVDS1
[ 1152.384] (II) intel(0): Manufacturer: SEC Model: 3445 Serial#: 0
[ 1152.384] (II) intel(0): Year: 2005 Week: 0
[ 1152.384] (II) intel(0): EDID Version: 1.3
[ 1152.384] (II) intel(0): Digital Display Input
[ 1152.384] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 1152.384] (II) intel(0): Gamma: 2.20
[ 1152.384] (II) intel(0): No DPMS capabilities specified
[ 1152.384] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1152.384] (II) intel(0): First detailed timing is preferred mode
[ 1152.384] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 1152.384] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 1152.384] (II) intel(0): Manufacturer's mask: 0
[ 1152.384] (II) intel(0): Supported detailed timing:
[ 1152.384] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 1152.384] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
[ 1152.384] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 1152.384] (II) intel(0): Unknown vendor-specific block f
[ 1152.384] (II) intel(0): SAMSUNG
[ 1152.384] (II) intel(0): LTN154X3-L03
[ 1152.384] (II) intel(0): EDID (in hex):
[ 1152.384] (II) intel(0): 00ffffffffffff004ca3453400000000
[ 1152.384] (II) intel(0): 000f0103802115780a87f594574f8c27
[ 1152.384] (II) intel(0): 27505400000001010101010101010101
[ 1152.384] (II) intel(0): 010101010101ee1a0080502010301030
[ 1152.384] (II) intel(0): 13004bcf100000190000000f00000000
[ 1152.384] (II) intel(0): 00000000002387026400000000fe0053
[ 1152.384] (II) intel(0): 414d53554e470a2020202020000000fe
[ 1152.384] (II) intel(0): 004c544e31353458332d4c30330a0065
[ 1152.384] (II) intel(0): EDID vendor "SEC", prod id 13381
[ 1152.384] (II) intel(0): Printing DDC gathered Modelines:
[ 1152.384] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
[ 1152.385] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1152.385] (II) intel(0): Printing probed modes for output LVDS1
[ 1152.385] (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz)
[ 1152.385] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 1152.385] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 1152.385] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 1152.385] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 1152.409] (II) intel(0): EDID for output VGA1
[ 1152.804] (II) intel(0): EDID for output TV1
[ 1152.804] (II) intel(0): Output LVDS1 connected
[ 1152.804] (II) intel(0): Output VGA1 disconnected
[ 1152.804] (II) intel(0): Output TV1 disconnected
[ 1152.804] (II) intel(0): Using exact sizes for initial modes
[ 1152.804] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 1152.804] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1152.804] (II) intel(0): Kernel page flipping support detected, enabling
[ 1152.804] (**) intel(0): Display dimensions: (330, 210) mm
[ 1152.804] (**) intel(0): DPI set to (98, 96)
[ 1152.804] (II) Loading sub module "fb"
[ 1152.804] (II) LoadModule: "fb"
[ 1152.804] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1152.804] (II) Module fb: vendor="X.Org Foundation"
[ 1152.804] compiled for 1.10.3.901, module version = 1.0.0
[ 1152.804] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1152.804] (II) Loading sub module "dri2"
[ 1152.804] (II) LoadModule: "dri2"
[ 1152.805] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1152.805] (II) Module dri2: vendor="X.Org Foundation"
[ 1152.805] compiled for 1.10.3.901, module version = 1.2.0
[ 1152.805] ABI class: X.Org Server Extension, version 5.0
[ 1152.805] (II) UnloadModule: "vesa"
[ 1152.805] (II) Unloading vesa
[ 1152.805] (II) UnloadModule: "fbdev"
[ 1152.805] (II) Unloading fbdev
[ 1152.805] (II) UnloadModule: "fbdevhw"
[ 1152.805] (II) Unloading fbdevhw
[ 1152.805] (==) Depth 24 pixmap format is 32 bpp
[ 1152.805] (II) intel(0): [DRI2] Setup complete
[ 1152.805] (II) intel(0): [DRI2] DRI driver: i915
[ 1152.805] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 1152.805] (II) UXA(0): Driver registered support for the following operations:
[ 1152.805] (II) solid
[ 1152.805] (II) copy
[ 1152.805] (II) composite (RENDER acceleration)
[ 1152.805] (II) put_image
[ 1152.805] (II) get_image
[ 1152.805] (==) intel(0): Backing store disabled
[ 1152.805] (==) intel(0): Silken mouse enabled
[ 1152.805] (II) intel(0): Initializing HW Cursor
[ 1152.843] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1152.843] (==) intel(0): DPMS enabled
[ 1152.843] (==) intel(0): Intel XvMC decoder disabled
[ 1152.843] (II) intel(0): Set up textured video
[ 1152.843] (II) intel(0): Set up overlay video
[ 1152.843] (II) intel(0): direct rendering: DRI2 Enabled
[ 1152.843] (==) intel(0): hotplug detection: "enabled"
[ 1152.843] (--) RandR disabled
[ 1152.843] (II) Initializing built-in extension Generic Event Extension
[ 1152.843] (II) Initializing built-in extension SHAPE
[ 1152.843] (II) Initializing built-in extension MIT-SHM
[ 1152.843] (II) Initializing built-in extension XInputExtension
[ 1152.844] (II) Initializing built-in extension XTEST
[ 1152.844] (II) Initializing built-in extension BIG-REQUESTS
[ 1152.844] (II) Initializing built-in extension SYNC
[ 1152.844] (II) Initializing built-in extension XKEYBOARD
[ 1152.844] (II) Initializing built-in extension XC-MISC
[ 1152.844] (II) Initializing built-in extension SECURITY
[ 1152.844] (II) Initializing built-in extension XINERAMA
[ 1152.844] (II) Initializing built-in extension XFIXES
[ 1152.844] (II) Initializing built-in extension RENDER
[ 1152.844] (II) Initializing built-in extension RANDR
[ 1152.844] (II) Initializing built-in extension COMPOSITE
[ 1152.844] (II) Initializing built-in extension DAMAGE
[ 1152.873] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1152.876] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1152.876] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1152.876] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 1152.876] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1152.876] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 1152.876] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1152.877] (II) intel(0): Setting screen physical size to 338 x 211
[ 1152.998] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 1152.998] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1152.998] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1152.998] (II) LoadModule: "evdev"
[ 1152.998] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1152.998] (II) Module evdev: vendor="X.Org Foundation"
[ 1152.998] compiled for 1.10.0, module version = 2.6.0
[ 1152.998] Module class: X.Org XInput Driver
[ 1152.998] ABI class: X.Org XInput driver, version 12.2
[ 1152.998] (II) Using input driver 'evdev' for 'Power Button'
[ 1152.998] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1152.998] (**) Power Button: always reports core events
[ 1152.998] (**) Power Button: Device: "/dev/input/event5"
[ 1152.998] (--) Power Button: Found keys
[ 1152.998] (II) Power Button: Configuring as keyboard
[ 1152.998] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 1152.998] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1152.998] (**) Option "xkb_rules" "evdev"
[ 1152.998] (**) Option "xkb_model" "evdev"
[ 1152.998] (**) Option "xkb_layout" "us"
[ 1152.999] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1153.066] (II) config/udev: Adding input device Video Bus (/dev/input/event1)
[ 1153.066] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1153.066] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1153.066] (II) Using input driver 'evdev' for 'Video Bus'
[ 1153.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1153.066] (**) Video Bus: always reports core events
[ 1153.066] (**) Video Bus: Device: "/dev/input/event1"
[ 1153.066] (--) Video Bus: Found keys
[ 1153.066] (II) Video Bus: Configuring as keyboard
[ 1153.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input1/event1"
[ 1153.066] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 1153.066] (**) Option "xkb_rules" "evdev"
[ 1153.066] (**) Option "xkb_model" "evdev"
[ 1153.066] (**) Option "xkb_layout" "us"
[ 1153.066] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1153.078] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1153.078] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1153.078] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1153.078] (II) Using input driver 'evdev' for 'Power Button'
[ 1153.078] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1153.078] (**) Power Button: always reports core events
[ 1153.078] (**) Power Button: Device: "/dev/input/event2"
[ 1153.078] (--) Power Button: Found keys
[ 1153.078] (II) Power Button: Configuring as keyboard
[ 1153.078] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 1153.078] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1153.078] (**) Option "xkb_rules" "evdev"
[ 1153.078] (**) Option "xkb_model" "evdev"
[ 1153.078] (**) Option "xkb_layout" "us"
[ 1153.078] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1153.079] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 1153.079] (II) No input driver/identifier specified (ignoring)
[ 1153.080] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 1153.080] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1153.080] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1153.080] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1153.080] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1153.080] (**) Sleep Button: always reports core events
[ 1153.080] (**) Sleep Button: Device: "/dev/input/event3"
[ 1153.080] (--) Sleep Button: Found keys
[ 1153.080] (II) Sleep Button: Configuring as keyboard
[ 1153.080] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 1153.080] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 1153.080] (**) Option "xkb_rules" "evdev"
[ 1153.080] (**) Option "xkb_model" "evdev"
[ 1153.080] (**) Option "xkb_layout" "us"
[ 1153.080] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1153.082] (II) config/udev: Adding input device HDA Intel Mic at Ext Front Jack (/dev/input/event7)
[ 1153.082] (II) No input driver/identifier specified (ignoring)
[ 1153.096] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1153.099] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1153.099] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1153.099] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1153.099] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1153.100] (**) AT Translated Set 2 keyboard: always reports core events
[ 1153.100] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1153.100] (--) AT Translated Set 2 keyboard: Found keys
[ 1153.100] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1153.100] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1153.100] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 1153.100] (**) Option "xkb_rules" "evdev"
[ 1153.100] (**) Option "xkb_model" "evdev"
[ 1153.100] (**) Option "xkb_layout" "us"
[ 1153.100] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1153.100] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 1153.100] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1153.100] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1153.100] (II) LoadModule: "synaptics"
[ 1153.101] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1153.101] (II) Module synaptics: vendor="X.Org Foundation"
[ 1153.101] compiled for 1.10.2, module version = 1.4.1
[ 1153.101] Module class: X.Org XInput Driver
[ 1153.101] ABI class: X.Org XInput driver, version 12.2
[ 1153.101] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1153.101] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1153.101] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1153.101] (**) Option "Device" "/dev/input/event8"
[ 1153.113] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 1153.113] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 1153.113] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1153.113] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1153.113] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 1153.113] (**) Option "VertEdgeScroll" "on"
[ 1153.126] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1153.126] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1153.139] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 1153.139] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 1153.139] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1153.140] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 1153.140] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 1153.140] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1153.140] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1153.140] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1153.140] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1153.140] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1153.140] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1153.140] (II) No input driver/identifier specified (ignoring)
[ 1153.141] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 1153.141] (II) No input driver/identifier specified (ignoring)
[ 1157.866] (II) Power Button: Close
[ 1157.866] (II) UnloadModule: "evdev"
[ 1157.866] (II) Unloading evdev
[ 1157.879] (II) Video Bus: Close
[ 1157.879] (II) UnloadModule: "evdev"
[ 1157.879] (II) Unloading evdev
[ 1157.893] (II) Power Button: Close
[ 1157.893] (II) UnloadModule: "evdev"
[ 1157.893] (II) Unloading evdev
[ 1157.906] (II) Sleep Button: Close
[ 1157.906] (II) UnloadModule: "evdev"
[ 1157.906] (II) Unloading evdev
[ 1157.919] (II) AT Translated Set 2 keyboard: Close
[ 1157.919] (II) UnloadModule: "evdev"
[ 1157.919] (II) Unloading evdev
[ 1157.946] (II) UnloadModule: "synaptics"
[ 1157.946] (II) Unloading synaptics
Any ideas?
Last edited by robotmachine (2011-09-10 00:02:34)roygbiv wrote:
robotmachine wrote:What would be a simpler way to start up X?
A simpler way would be to start xterm for instance - in your ~/.xinitrc:
exec xterm
That way you can see if it's fluxbox that is causing the trouble. And by the way your ~/.fluxbox/startup should read this (assuming it's not a typo in the first line there):
#!/bin/sh
# Set background image.
feh --bg-scale '/home/brian/.fluxbox/wall.jpg'
# Start fluxbox
exec fluxbox -log "/home/brian/.fluxbox/current.log"
Also, once you know X works, you can then try just starting fluxbox "exec fluxbox", without the startfluxbox script. Comment out the conditional statement also. If that works, then it is either the startfluxbox or the conditional.
Edit: Looks like you got it fixed. congrats.
Last edited by the sad clown (2011-09-10 00:18:07) -
Mobility Radeon 7500 OpenGL issues
Whenever I attempt to use anything involving openGL, my CPU usage hits 100%. Complex openGL programs will drop to a framerate of less than 10, and sometimes crash Xorg. How can I fix this?
General system info:
lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
lsmod
Module Size Used by
ipv6 279604 16
oss_usb 106284 2
oss_ich 18832 4
osscore 552820 4 oss_usb,oss_ich
ext2 68964 1
fan 4448 0
fuse 64856 2
arc4 1756 2
ecb 2812 2
b43 137208 0
radeon 666112 2
ttm 37164 1 radeon
joydev 10528 0
drm 156160 4 radeon,ttm
i2c_algo_bit 5888 1 radeon
e100 34308 0
ssb 45988 1 b43
ppdev 7008 0
yenta_socket 25384 2
rsrc_nonstatic 12316 1 yenta_socket
mii 4892 1 e100
thinkpad_acpi 67988 0
battery 10816 0
nvram 6984 1 thinkpad_acpi
video 20116 0
output 2908 1 video
pcmcia 36168 2 b43,ssb
parport_pc 37060 1
irtty_sir 5564 0
sir_dev 11712 1 irtty_sir
psmouse 60084 0
ac 4224 0
processor 36076 1
iTCO_wdt 11072 0
iTCO_vendor_support 3136 1 iTCO_wdt
mac80211 155788 1 b43
irda 126744 1 sir_dev
crc_ccitt 1724 1 irda
thermal 13912 0
uhci_hcd 23692 0
button 5612 0
ehci_hcd 36620 0
serio_raw 5792 0
shpchp 34384 0
intel_agp 28604 1
lp 9732 0
parport 34412 3 ppdev,parport_pc,lp
evdev 10240 15
cfg80211 90364 2 b43,mac80211
pci_hotplug 28732 1 shpchp
pcspkr 2492 0
i2c_i801 9616 0
i2c_core 21808 4 radeon,drm,i2c_algo_bit,i2c_i801
rfkill 19696 2 thinkpad_acpi,cfg80211
sg 27728 0
agpgart 32660 3 ttm,drm,intel_agp
led_class 4000 2 b43,thinkpad_acpi
usbcore 154032 5 oss_usb,uhci_hcd,ehci_hcd
pcmcia_core 35920 5 b43,ssb,yenta_socket,rsrc_nonstatic,pcmcia
rtc_cmos 11344 0
rtc_core 17976 1 rtc_cmos
rtc_lib 2524 1 rtc_core
ext4 334112 2
mbcache 7104 2 ext2,ext4
jbd2 82016 1 ext4
crc16 1660 1 ext4
sr_mod 16644 0
cdrom 36032 1 sr_mod
sd_mod 28344 5
pata_acpi 4252 0
ata_piix 23268 4
ata_generic 4704 0
libata 169548 3 pata_acpi,ata_piix,ata_generic
floppy 56356 0
scsi_mod 112468 4 sg,sr_mod,sd_mod,libata
dmesg
Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
BIOS-e820: 000000003ff70000 - 000000003ff7e000 (ACPI data)
BIOS-e820: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x3ff70 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DBFFF uncachable
DC000-DFFFF write-back
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03FF80000 mask FFFF80000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003ff70000 (usable)
modified: 000000003ff70000 - 000000003ff7e000 (ACPI data)
modified: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
modified: 000000003ff80000 - 0000000040000000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 3fea7000 - 3ff5fb2e
Allocated new RAMDISK: 00100000 - 001b8b2e
Move RAMDISK from 000000003fea7000 - 000000003ff5fb2d to 00100000 - 001b8b2d
ACPI: RSDP 000f7010 00024 (v02 IBM )
ACPI: XSDT 3ff731cd 0004C (v01 IBM TP-1I 00002080 LTP 00000000)
ACPI: FACP 3ff73300 00081 (v01 IBM TP-1I 00002080 IBM 00000001)
ACPI: DSDT 3ff733e7 0AAD5 (v01 IBM TP-1I 00002080 MSFT 0100000D)
ACPI: FACS 3ff7f000 00040
ACPI: SSDT 3ff733b4 00033 (v01 IBM TP-1I 00002080 MSFT 0100000D)
ACPI: ECDT 3ff7debc 00052 (v01 IBM TP-1I 00002080 IBM 00000001)
ACPI: TCPA 3ff7df0e 00032 (v01 IBM TP-1I 00002080 PTL 00000001)
ACPI: BOOT 3ff7dfd8 00028 (v01 IBM TP-1I 00002080 LTP 00000001)
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [000156e000 - 0001574128] BRK ==> [000156e000 - 0001574128]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000100000 - 00001b8b2e] NEW RAMDISK ==> [0000100000 - 00001b8b2e]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003ff70
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0003ff70
On node 0 totalpages: 261899
free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 271 pages used for memmap
HighMem zone: 34403 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259852
Kernel command line: root=/dev/disk/by-uuid/ce79e597-2b00-4812-95b4-eda62758ab6c ro vga=792 nomodeset
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003ff70)
Memory: 1031828k/1048000k available (3111k kernel code, 15416k reserved, 1120k data, 416k init, 138696k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1422000 - 0xc148a000 ( 416 kB)
.data : 0xc1309ddd - 0xc1421ea8 (1120 kB)
.text : 0xc1000000 - 0xc1309ddd (3111 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:512
Fast TSC calibration using PIT
Detected 2192.708 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.14 BogoMIPS (lpj=7309026)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
------------[ cut here ]------------
WARNING: at arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x4b/0x60()
Hardware name: 236686U
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.31-ARCH #1
Call Trace:
[<c10464da>] ? warn_slowpath_common+0x7a/0xc0
[<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
[<c1046540>] ? warn_slowpath_null+0x20/0x40
[<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
[<c1016601>] ? intel_init_thermal+0xd1/0x1d0
[<c10149c3>] ? mce_init+0xc3/0xf0
[<c10ed693>] ? __kmalloc+0x93/0x210
[<c1015bc5>] ? mce_intel_feature_init+0x15/0x70
[<c13014ed>] ? mcheck_init+0x261/0x2b5
[<c12ff55a>] ? identify_cpu+0x377/0x386
[<c10ecabf>] ? kmem_cache_alloc+0x6f/0x170
[<c1429dc9>] ? identify_boot_cpu+0xa/0x1e
[<c1429f90>] ? check_bugs+0x14/0x108
[<c109add0>] ? __delayacct_tsk_init+0x20/0x50
[<c1422a31>] ? start_kernel+0x332/0x353
[<c14224f0>] ? unknown_bootoption+0x0/0x1bd
---[ end trace a7919e7f17c0a725 ]---
CPU0: Thermal monitoring enabled (TM1)
Performance Counters: no PMU driver, software counters only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20090521
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4387.14 BogoMIPS).
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0201fff]
pci 0000:02:08.0: reg 10 32bit mmio: [0xd0202000-0xd0202fff]
pci 0000:02:08.0: reg 14 io port: [0x8000-0x803f]
pci 0000:02:08.0: supports D1 D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x3000-0x3fff
pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: 0x004000-0x0040ff
pci 0000:02:00.0: IO window: 0x004400-0x0044ff
pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:00.1: IO window: 0x004800-0x0048ff
pci 0000:02:00.1: IO window: 0x004c00-0x004cff
pci 0000:02:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
pci 0000:02:00.1: MEM window: 0xd8000000-0xdbffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x4000-0x8fff
pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 738k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1259350175.183:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1746
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
vesafb: framebuffer at 0xe8000000, mapped to 0xf8080000, using 4608k, total 16320k
vesafb: mode is 1024x768x24, linelength=3072, pages=6
vesafb: protected mode interface info at c000:5701
vesafb: pmi: set display start = c00c5795, set palette = c00c57e1
vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Switched to high resolution mode on CPU 0
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 416k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a National Semiconductor PC87306
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata1.00: ATA-7: SAMSUNG MP0201H, YP200-06, max UDMA/100
ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, 0211, max UDMA/33
ata1.00: 39179952 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0201H YP20 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N 0211 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 39179952 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): barriers enabled
kjournald2 starting: pid 500, dev sda3:8, commit interval 5 seconds
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda3): orphan cleanup on readonly fs
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 212034
EXT4-fs (sda3): 1 orphan inode deleted
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
udev: starting version 146
intel_rng: FWH not detected
Linux agpgart interface v0.103
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
input: PC Speaker as /devices/platform/pcspkr/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
lp: driver loaded but no devices found
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (58 C)
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
NET: Registered protocol family 23
usb 2-2: new full speed USB device using uhci_hcd and address 2
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: AC Adapter [AC] (on-line)
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
usb 2-2: configuration #1 chosen from 4 choices
lp0: using parport0 (interrupt-driven).
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc 00:0c: disabled
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input6
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1IET69WW (2.08 ), EC 1IHT20WW-1.07
ACPI: Battery Slot [BAT0] (battery present)
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
ppdev: user-space parallel port driver
yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
yenta_cardbus 0000:02:00.0: Socket status: 30000006
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:02:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xd0202000, irq 11, MAC addr 00:0d:60:37:df:cb
b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
yenta_cardbus 0000:02:00.1: Socket status: 30000006
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
fuse init (API version 7.12)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
psmouse serio2: ID: 10 00 64
EXT4-fs (sda3): internal journal on sda3:8
EXT4-fs (sda4): barriers enabled
kjournald2 starting: pid 2051, dev sda4:8, commit interval 5 seconds
EXT4-fs (sda4): internal journal on sda4:8
EXT4-fs (sda4): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda4): mounted filesystem with ordered data mode
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
usb 2-2: USB disconnect, address 2
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
Clocksource tsc unstable (delta = -78033180 ns)
oss_ich 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver oss_usb
ttyS1: LSR safety check engaged!
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs
b43 ssb0:0: firmware: requesting b43/ucode5.fw
b43 ssb0:0: firmware: requesting b43/pcm5.fw
b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1e:e5:79:4e:41
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:79:4e:41
wlan0: RX AssocResp from 00:1e:e5:79:4e:41 (capab=0x11 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 4 choices
Consoledump from an openGL game:
[nick@myhost nick]# tremulous
tremulous 1.1.0 linux-x86 Mar 17 2009
----- FS_Startup -----
Current search path:
/root/.tremulous/base
/opt/tremulous/base/vms-1.1.0.pk3 (4 files)
/opt/tremulous/base/map-uncreation-1.1.0.pk3 (110 files)
/opt/tremulous/base/map-tremor-1.1.0.pk3 (45 files)
/opt/tremulous/base/map-transit-1.1.0.pk3 (135 files)
/opt/tremulous/base/map-niveus-1.1.0.pk3 (134 files)
/opt/tremulous/base/map-nexus6-1.1.0.pk3 (151 files)
/opt/tremulous/base/map-karith-1.1.0.pk3 (118 files)
/opt/tremulous/base/map-atcs-1.1.0.pk3 (87 files)
/opt/tremulous/base/map-arachnid2-1.1.0.pk3 (67 files)
/opt/tremulous/base/data-1.1.0.pk3 (1229 files)
/opt/tremulous/base
2080 files in pk3 files
execing default.cfg
couldn't exec autogen.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
----- Client Initialization -----
----- Initializing Renderer ----
----- Client Initialization Complete -----
----- R_Init -----
------- Input Initialization -------
Joystick is not active.
...loading libGL.so.1:
Calling SDL_Init(SDL_INIT_VIDEO)...
SDL_Init(SDL_INIT_VIDEO) passed.
Initializing OpenGL display
...setting mode 3: 640 480
Using 8/8/8 Color bits, 24 depth, 8 stencil display.
GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
Initializing OpenGL extensions
...GL_S3_s3tc not found
...ignoring GL_EXT_texture_env_add
...using GL_ARB_multitexture
...using GL_EXT_compiled_vertex_array
GL_VENDOR: Tungsten Graphics, Inc.
GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
GL_VERSION: 1.3 Mesa 7.6
GL_EXTENSIONS: GL_ARB_draw_buffers GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_logic_op GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_APPLE_packed_pixels GL_ATI_texture_env_combine3 GL_ATI_texture_mirror_once GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays
GL_MAX_TEXTURE_SIZE: 2048
GL_MAX_ACTIVE_TEXTURES_ARB: 3
PIXELFORMAT: color(24-bits) Z(24-bit) stencil(8-bits)
MODE: 3, 640 x 480 fullscreen hz:N/A
GAMMA: hardware w/ 0 overbright bits
CPU:
rendering primitives: single glDrawElements
texturemode: GL_LINEAR_MIPMAP_LINEAR
picmip: 0
texture bits: 0
multitexture: enabled
compiled vertex arrays: enabled
texenv add: disabled
compressed textures: disabled
Initializing Shaders
...loading 'scripts/uncreation.shader'
...loading 'scripts/q3map2_tremor.shader'
...loading 'scripts/tremor.shader'
...loading 'scripts/transit.shader'
...loading 'scripts/niveus.shader'
...loading 'scripts/nexus6.shader'
...loading 'scripts/karith.shader'
...loading 'scripts/atcs.shader'
...loading 'scripts/arachnid2.shader'
...loading 'scripts/jetpack.shader'
...loading 'scripts/core.shader'
...loading 'scripts/flame.shader'
...loading 'scripts/misc.shader'
...loading 'scripts/common-trem.shader'
...loading 'scripts/titan.shader'
...loading 'scripts/water.shader'
...loading 'scripts/displays.shader'
...loading 'scripts/plant_life.shader'
...loading 'scripts/stasis.shader'
...loading 'scripts/booster.shader'
...loading 'scripts/eggpod.shader'
...loading 'scripts/medistat.shader'
...loading 'scripts/mgturret.shader'
...loading 'scripts/reactor.shader'
...loading 'scripts/telenode.shader'
...loading 'scripts/trapper.shader'
...loading 'scripts/overmind.shader'
...loading 'scripts/tesla.shader'
...loading 'scripts/dcc.shader'
...loading 'scripts/hive.shader'
...loading 'scripts/level2.shader'
...loading 'scripts/human.shader'
...loading 'scripts/null.shader'
...loading 'scripts/weapons.shader'
...loading 'scripts/conkit.shader'
...loading 'scripts/advckit.shader'
...loading 'scripts/psaw.shader'
...loading 'scripts/mdriver.shader'
...loading 'scripts/flamer.shader'
...loading 'scripts/crosshairs.shader'
...loading 'scripts/grenade.shader'
...loading 'scripts/splash.shader'
...loading 'scripts/marks.shader'
...loading 'scripts/sprites.shader'
...loading 'scripts/muzzleflashes.shader'
----- finished R_Init -----
------ Initializing Sound ------
Initializing SDL audio driver...
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
SDL audio driver is "dsp".
SDL_AudioSpec:
Format: AUDIO_S16LSB
Freq: 22050
Samples: 512
Channels: 2
Starting SDL audio callback...
SDL audio initialized.
----- Sound Info -----
1 stereo
16384 samples
16 samplebits
1 submission_chunk
22050 speed
0xa4241f8 dma buffer
No background file.
Sound intialization successful.
Sound memory manager started
Loading vm file vm/ui.qvm...
...which has vmMagic VM_MAGIC_VER2
Loading 1075 jump table targets
VM file ui compiled to 786313 bytes of code
ui loaded in 4596672 bytes on the hunk
UI menu load time = 705 milli seconds
UI menu load time = 55 milli seconds
UI menu load time = 51 milli seconds
--- Common Initialization Complete ---
Opening IP socket: localhost:30720
Hostname: myhost.localdomain
Alias: myhost
IP: 127.0.0.1
Started tty console (use +set ttycon 0 to disable)
*********************************WARN_ONCE*********************************
File radeon_tcl.c function radeon_run_tcl_render line 499
Rendering was 734 commands larger than predicted size. We might overflow command buffer.
----- CL_Shutdown -----
Closing SDL audio device...
SDL audio device shut down.
RE_Shutdown( 1 )
----- CL_Shutdown -----
Shutdown tty console
[nick@myhost nick]#
Display all 3035 possibilities? (y or n)radionecrotic wrote:
Has this always been the case for you or did you update recently and it started happening? There appears to be some sort of conflict with some machines and new changes to the kernel to allow quicker mode setting. See http://bbs.archlinux.org/viewtopic.php? … 47#p659347. I had to add !radeon to my MODULES list in /etc/rc.conf to get X to even work at all. I don't run anything that uses OpenGL so I don't know if it'll address your issue.
You may also want to take a look at http://bbs.archlinux.org/viewtopic.php? … 20#p662920 and add intel_agp radeon (that's two modules, in that order) to your MODULES list.
Well, I was having the graphical corruption issue in that first thread until I added the nomodeset boot flag. As for the modesetting, I think it directly conflicts with my boot flag, and without it, I get corruption. =/
Maybe you are looking for
-
Sharing Library across multiple machines
I have a shared network drive in my house and want to have multiple computers (two Macs and one PC) all have access to the same library. I have all of the machines pointing to the same mucis folder so that is not a problem. I would like to be able to
-
Second display via Thunderbolt "flashes" after EFI 1.7
I have a second display (Samsung SyncMaster 245BW) connected to my 27" iMac via Thunderbolt and a miniDisplay -> DVI connector. I just recently got the 1.7 EFI software update and noticed that the second display will flash every 2 - 3 minutes. Anyo
-
ATTACHED IMAGES DON'T LOAD OR SHOW IN HOTMAIL BCCs TO MYSELF
I am currently running FF 3.6.18. I have never had this problem before. Worked fine up until Tuesday JUL. 19. Whenever I send an email to someone w/ attached image files, I always BCC myself to see that everything went through okay. As of 2 days ago,
-
Kernel msg: Cannot open ter-112n
I included the ter-112n font to be my consolefont in rc.conf :CONSOLEFONT="ter-112n". I included the keymap in mkinitcpio.conf and created an updated kernel img. However, on boot up I get the message "Cannot open ter-112n". The font exits in /usr/sha
-
Droid and mac email - can't set up
I have a DI and also a macbook with mac email. I migrated from mobileme to iCloud, although I don't yet have Lion, just SL. I can't set up my DI to receive mac email, however I was recently receiving it on my droid until the change. I've tried all