RWB-Adapter Engine-Monitoring calling url of shorthost name

Hi,
I am familiar with where to set the domain name or short names for XI within the various connection settings
in the Exchange Profile. Does anyone know where the adapter engine monitor settings are stored? We are suddenly getting errors for http://host:52100/mdt/AmtServlet but if I put the FQDN in a new browser window it works fine. But the developers
here are unable to post to the adapter....
Thanks so much in advance...
Jim

Hi James,
FQDN is essential not only for RWB but for other components of WAS as well. Launch XI page wiht sxmb_ifr and check if it displays FQDN. Else follow the complete FQDN activation procedure as below.
1. In RZ10, add the parameter icm/host_name_full in instance profile.
2. Restart your system and follow note 764176 for changing SLD associations. This is important.
3. For adapter engine, apply note 804124.
Follow the complete procedure.
Regards,
Youvraj

Similar Messages

Reg: Error in adapter Engine Monitoring

Hi Guys,
In my RFC to File Scenario i got error as Adapter message property was configured was mandatory element but there is no Dynamic ocnfiguration elementin XI MEssage Header. This is occur in adapter engine monitoring in RWB.
Thanks

This error comes if you there is a problem in passing the file via dynamic configuration
for this if you want temporary solution like filename not necessarily be dynamic then go to receiver file adapter then
adapter specific message attributes deselect filed Failif file name does not.... sme option where you can uncheck the failure option
and in this case need to provide the filename and file will get generated with this filename if there is no filename generates using dynamic configuration
for this to resolve permanently then check the filename is passed or not to file adapter in moni in dynamicconfiguratuoin tab of callAdapter pipeline service
HTH
Rajesh

Adapter Engine monitoring doesn't show messages

I have 2 scenarios
1. Synch HTTP -> Synch RFC
2. Synch HTTP -> Synch BPM -> Synch RFC
In case 1 Adapter Engine monitoring shows all messages correctly
In case 2 there is no entry for HTTP Sender system only BPM->SAP System.
Could you help me why RWB doesn't show it?

denis,
just to add to what moorthy has told. IDOC and HTTP adapters interact directly with the INTEGRATION ENGINE on the ABAP STACK while, the other adapters interact with the ADAPTER ENGINE available on the J2EE STACK.
That is why, you do not gind the same on the RWB --> ADAPTER MONITORING.
Also, the reason why you do not have a SENDER HTTP and IDOC adapter.
Regards,
bhavesh

CCMS Adapter Engine monitoring

Hi,
CCMS has been configured in our land scape long back. this configuration gets data from adapter engine and display it. We need to modify this. When we checked the configuration all Integration engine errors are being gathered using standard MTE classes and respective auto reaction methods are set.
But where as for Adapter engine monitoring a custom MTE's are created in below format.
<SID>\<SID> 00 Serv 2345672 pidev\Services\Adapter Framework\Messaging System\Sender Services\BS_Econ\Error Backlog
This has no standard method assigned to it. Searched over SDN, no GRMG is configured for polling this data. Please help in understanding how data can be polled for CCMS with out a method?

Hi ,
please check the below link for GRMG configuration steps and check the SAP Note 634771.
Configuring the CCMS Heartbeat Monitor for Java Components
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/e5/5d1741b393f26fe10000000a1550b0/content.htm
Regards
srinivas

Adapter engine URL different between CACHE and RWB adapter engine URL?

Hi there,
If I go to SXI_CACHE and go to the adapter engine runtime cache I get a URL of:
https://<server>/MessagingSystem/receive/AFW/XI
NOTE: The above URL is HTTPS.....and there is no port in the above....
However, if I go to the runtime workbench and click on the adapter engine and click on "test message", I get the following URL:
http://<server>:<port>/MessagingSystem/receive/AFW/XI
NOTE: The above url is HTTP and there is a port.
How can I get these URL's back in sync?
I want them both to be HTTP.
Any ideas?
Thanks

Hello
1) Check the value of the Exchange Profile parameter 'com.sap.aii.connect.secure_connections'. If you don't wish to use HTTPS this should not have any value set.
2) Delete the Adapter Engine cache in trx sxi_cache -> Goto -> Adapter Engine Cache -> Delete Cache Contents (trash can icon).
The AE cache will be populated the next time a message is sent through the system. Check the value after this is done.
Regards
Mark

J2SE adapter engine monitoring.

Hi,
I have setup GRMG monitoring for a J2SE adapter engine in our landscape. I have set up a HTTP RFC destination in SM59. In the HTTP RFC destination, type H, I have specified the "Target Host" (FQHN) the "Service No." (8200 default J2SE installation port) and a "Path Prefix" (/rtc). The security is set to Basic and I have used a PIRWBUSER that I have setup on the J2SE Adapter Engine with role Administator. In the GRMG template I insert the RFC destination.
I have also inserted the ID, ESR, RWB, SLD and the Central Adapter framework of the PI system in the GRMG template, then deployed the template on the monitoring server. I am able to successfully monitor the other components except for the J2SE adapter.
I have to concede that when I test the RFC destination to the J2SE adapter it does not work. I think the J2SE adapter is up, as I can connect to the administrator. Even when I put the url ("host:port/rtc") for the J2SE adapter in my browser, it then request to login. After I have logged in, it gives a error "The Page can not be found".
It would be most appreciated if someone can shed some light on this issue.
Regards
Willie Hugo

FTS SAP Basis,
Thanks for that advice. However once I have set the "Accept cookies" to "Yes", and once again I do a "Connection Test", the result I get "ICM_HTTP_CONNECTION_FAILED". Also remember when I try to connect to the URL "http://host:8200/rtc", it requests a login, but then display "The page can not be displayed".
Any other suggestions are welcome.
Regards
Willie Hugo

Exporting processed messages from adapter engine monitoring to excel

Hey experts,
I have some messages that are processed successfully. I can see them in the message monitoring for adapter engine in the RWB. I want to know if there is a way to export these messages to excel file.
Also we have a files archived by PI with a .001 extension attached to them. Is there a way to open these files and look at the processed messages?
Any help would be greatly appreciated.
Regards.

I can see them in the message monitoring for adapter engine in the RWB. I want to know if there is a way to export these messages to excel file.
I don't think so.But you can right click.Select View Source.And then save the message in a notepad.
Also we have a files archived by PI with a .001 extension attached to them. Is there a way to open these files and look at the processed messages?
I don't get this! You can open these files by doing a right click.Open with wordpad.

Adapter Engine Monitoring

I have simple file to file scenario.
Message monitoring shows duplicated entries for each message
For example
Sender | Receiver | Interface
System1 | | Interface1
System1 | System2 | Interface1
Could you explain this strange behavior?

"I thought Adapter Engine and Integration Engine stores messages in 2 different places. Is it correct?".
Yes you are correct.
I Still believe that there are some other Config scenarios(Incomplete may be) using the same adapter name for the sender adaptor, in your Integration Directory.
In Adapter monitoring, you will see all the messages that arrive at the specified Adapter.
The messages in SXMB_MONI will show only those messages which pass through the adapter.
Regards,
Ravi

Doesn't have XI adapter on Adapter Engine Monitor

Hi Experts,
I am doing File2File scenario with J2SE->XI->J2SE direction. So that I created a communication channel(CC) with XI type and Receiver role. It have no error, the status of message is always "Waiting". The sender and receiver file adapter on J2SE also has no error.
I checked adapters on my XI server(in XIRWB), I don't see XI adapter in it. It has adapters like: BC,CIDX,FILE,JDBC... I dont' know why.
Have you got any ideas, please help me. Thanks very much.
thach vn

Hi S.R.Suraj,
The message error in MONI is "SYSFAIL". OK, I will show you all info of the scenario config.
1. On J2SE that was installed in WinXP PC with IP is 10.10.1.25
       1.1 On FileSender adapter like this(no error):
             mode=FILE2XMB
             XI.TargetURL=http://MyHost:8002/sap/xi/engine?type=entry
             XI.User=PISUPER
             XI.Password=abcd1234
             XI.Client=001
             XI.Language=EN
             XI.QualityOfService=EO
            XI.SenderService= BS_PlainJ2SE_Sender
            XI.ReceiverService= BS_FileRecv
            XI.Interface=MI_Material_toPPS_OB
            XI.InterfaceNamespace=http://gml.com/xi/XI/Tutorials
            file.type = xml
            file.sourceDir=D:
Thach
Input
            file.sourceFilename=xi_test.xml
            file.processingMode=test
            file.pollInterval=10
     1.2 On FileReceiver adapter like this(no error)
            mode=XMB2FILE
            XI.httpPort=1000
            XI.httpService=http://10.10.1.25:1000/file/test
            file.createDir=0
            file.targetDir=D://Thach/Output
            file.targetFilename=output.xml
            file.writeMode=create
            file.writeMode=addTimeStamp
2. On XI ID like this
    One Business system with name BS_PlainJ2SE_Sender. It has no communication channel(CC)
    One Business service with name BS_FileRecv. It has 1 CC with name CC_File_Recv_Service. The detail config of this CC as:
            . Adapter type: XI
            . Role: Receiver
            . Transport protocol: HTTP 1.0
            . Msg protocol: XI3.0
            . Addressing type: URL address
            . Target host: 10.10.1.25
            . Service number: 1000
            . Path prefix: file/test
            . Authentication type: Non-SAP system
            . Username: SAP    (account for J2SE adapter)
            . Password: abcd
   One Receiver Determination, Interface Determination, Receiver Agreement
   No Sender Agreement (the tutorial says like that)
Both XI server and Local J2SE engine locate on LAN
Thank all of you for your interest.
vn thach
Edited by: vn thach on Jul 31, 2009 5:11 AM

RWB Integration Engine Monitoring doesn't work

When I am trying to see details of message (Message Content ) rbw shows the following page:
Service cannot be reached
What has happened?
URL http://xiserver:8000/sap/public/bc/its/mimes/system/99/page/hourglass.html call was terminated because the corresponding service is not available.
Whiv service do I need to start? SP14
Message was edited by: Sergey A

I have activated its.
Now I get an excption
java.rmi.RemoteException: com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method com.sap.aii.mdt.server.MessageMonitoringObjectImpl11.getMessageList().
;nested exception is:
java.lang.NullPointerException
at com.sap.engine.services.ejb.exceptions.BaseRemoteException.writeReplace(BaseRemoteException.java:276)
Do I need to restart XI?

Activation Problem in RWB(Adapter Engine)

Hi All,
Very Good Morning...
I have one strange situation happed in Integration Directory(communication Channel), When i activated the communication channel in Integration Directory.
But in RWB it doesn't show activate status, It is Inactivate status...
Not only this communication channel, Every communication channel is like this.
What can i do now.Kindly give me some suggestions
Thank you very much.
Sateesh

Hi Srinivas,
Thanks for your response.
My channel is active status. Upto last night it successfully working.Today morning i faced this issue...
Not only this adatper if i changed the any other adapter to active to Inactive status . But still Adpter Engine---Communication channel is showing Active status only.
it not changed in adapter level. Earlier also we faced the issue,at that time we restart the our Java stack after that the problem was resolved.
Now also i am facing the same issue.What is problem behind? Why it not working some times?
Can you please suggest me on the same.
Thank you
Sateesh

Which TABLEs are used in RWB ADAPTER ENGINE ?

Hello everyone,
Runtime Work Bench -> message monitoring
we can hier select message from
Messages of component: Integration Server from Database
Which TABLEs are used to query?
Thx in advance
Best Regards
Yaning

hello Seshagiri,
do you know? in RWB--> Message Monitoring after selection i can get many columns.
for example:
End-to-End-Informationen
Engine
Status          -
> as System Error or successful
Start
Ende
Sender-Partner
Sender-Service
Sender-Interface
Empfänger-Partner
Empfänger-Service
Empfänger-Interface
which table contains this Info. column Status ?
Thank you
regards
yaning

Advanced Adapter Engine Monitoring

Hi
I configured the Intergrated Configurations in ID for Sync scenarion to Increase the performance ...
i guess when i run the scenario its working ..but i am not able to see the messgaes in SXMB_MONI ( i think if we use AAE we cant see message in SXMB_MONI correct me if i am wrong ) ..
Is there any way that i can see my Payload in RWB for Synch calls

Note: AAE messages cannot be monitored in the ABAP stack (at least currently maybe in later enhancement packages we might)
some reads are:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70b8adc3-728c-2a10-7fad-d43f29074ef8
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa

"Non-Central Adapter Engines" in RWB

Hi.
We install XI system and we changed host name according to notes 757692.
After then, We found one problem in RWB.
When we run Component Monitor in RWB, Adapter engine is in "Non-Central Adapter Engines".
Why Adapter engine is in "Non-Central Adapter Engines" node ?
Any ideas ?
Regards, Arnold.

Hello Sonali
This is most likely caused by errors registering the XI components in the SLD. Apply the notes below:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
Also search the forum for similar issues registering the adapter engine in the SLD components.
Regards
Mark

Cannot see adapter engine messages in message monitoring

hi guys,
i cannot see my adapter engine messages in message monitoring for my http to RFC syncronous scnenario.
i can however see the integration engine messages and can also see the receiver RFC channel in communication channel monitoring

Hi
this link ll help u in it -
Adapter Engine monitoring is provided in detail. Try as mentioned
http://help.sap.com/saphelp_nwpi71/helpdata/EN/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Regards

RWB-Adapter Engine-Monitoring calling url of shorthost name

Similar Messages

Maybe you are looking for