RWB error in Sender JDBC adapter

Hi All,
I am using SP at sender communication channel. When I am activating the Sendr CC I am getting the The statement did not return a result set. error.
But when I lgged to database server and checked the SP it was working fine and giving the values in table. means SP is producing result set.
what could be the possible resong for the error.
regards
rams

Hi,
1. turn on the logging in SQL server
2. start jdbc adapter on XI
3. check logs on SQL server
Regards,
Michal Krawczyk

Similar Messages

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

Error in XI Sender JDBC adapter for AS/400 DB2

We are trying to connect to AS/400 DB2 from XI's Sender JDBC Adapter. we got the driver from DataDirect (connectjdbc.jar) and configured it within XI .The configuration according to the manual for this jar file is
// Register the driver with the driver manager
Class.forName("com.ddtek.jdbc.db2.DB2Driver");
// Establish the Connection
String url = "jdbc:datadirect:db2://corpserver1:50000;LocationName=ACCTNG";
Connection con = DriverManager.getConnection(url, "test04", "test04");
In XI we configured this as:
Driver = com.ddtek.jdbc.db2.DB2Driver
Connection = jdbc:datadirect:db2://servername;LocationName=NBHAGWAT
and specified the user id and password
Note: The Port Number is optional
When this was done in XI, we got the below error in the Adapter Monitoring:
Sender Adapter v2108 for Party '', Service 'JDBCtoFile':
Configured at 2006-12-19 15:45:31 MST
History:
- 2006-12-19 15:45:31 MST: Retry interval started. Length: 10.000 s
- 2006-12-19 15:45:31 MST: Error: Accessing database connection 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT' failed: DriverManagerException: Cannot establish connection to URL 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT': SAPClassNotFoundException: com.ddtek.jdbc.db2.DB2Driver
- 2006-12-19 15:45:31 MST: Processing started
Is this because there is something wrong because the way the connection string is specified.
Anybody who has configured XI Sender JDBC adapter for AS/400 DB2, please send us some information on this.
Thank you,
Regards,
Balaji

> SAPClassNotFoundException:
> com.ddtek.jdbc.db2.DB2Driver
It looks like your JDBC driver is not found. Have you deployed the driver to XI?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10</a>

SENDER JDBC ADAPTER ERROR

Hi all,
We are having an extrange problem. We are trying to read some info from an oracle Database, but we have always this error :
Error: SQLException during query 'SELECT * FROM XX': java.sql.SQLException: ORA-00942: table or view does not exist: SQLException: ORA-00942: table or view does not exist
And WE have checked it, and the table is there. To understand what is happening we try with another table and it works, we have compare both an has the same features.
Any Ideas?

Hi,
This is the format in which your Data polled from the DB wiill be created,
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset>
Resultset is to be replaced by your DT / Message Type name.
In the Sender JDBC adapter, give the Document Name as the Message Type name and the Document Namespace as the Namespace of your Message Type.
Is this how you have created the source structure?
Regards
Bhavesh

Stored procedure in Sender JDBC Adapter

Hi All,
My Scenrio goes like this ...
Stored Procedure(SQL Server) --- PI -
File
I need to write the results of stored procedure to File.Here I don't need any mapping.So how many DT , MT and MI need to be created?
The interface need to run by 6AM from Monday to Thrusday, how can i achieve this ?
Stored Procedure has only select statement and no Update statement , but it takes Date as Input parameter , so what i need to provide in sender JDBC adapter.
Thanks,
Monish

Hi Monish,
As per your requirement it is JDBC to File. Please be careful with the structure to be created for sender JDBC. I am unable to understand why you donot require a mapping for this. How XI will send the data to a file then.As per my knowledge if it's file to file and just pick and drop then we can neglect IR and go for ID.But here you are working with JDBC and File so you will be in need of it.
IR:
DT: 2
JDBC_Sender_DT
File_Output_DT(Optional)
You can use the JDBC sender data type structure for File output also.
MT as per your DT
MI:2
Outbound MI: JDBC structure
Inbound MI : File structure
MM: 1
IM: 1
ID as similar to other scenarios.All 1 objects for RD,ID,Sender Agreement and Receiver Agreement.
Sender JDBC channel:
Query: Select * from table where date
But I have a query how are you providing date in input paramerter.It will be dynamically entered into the query right.
You can mention the Avalibility planning for your interface to work in RWB.
Go to RWB>Component Monitoring>Adapter Engine->Communication Channel Monitoring>Avaliablity Planning
Please explain.
Regards,
Nutan

Problem in sender JDBC adapter

hello,
I am facing one typical problem in sender JDBC adapter.
Here is the issue,
JDBC API method getString threw an exception: java.sql.SQLException: Cursor state not valid.
Can anyone please help me out in solving this problem?
Actually after a retry of 3 times the message has been successfully sent. Till then i am getting these error
On 1st attempt ,
Error during conversion of query result to XML java.sql.SQLException: Cursor state not valid
On 2nd attempt,
Error during conversion of query result to XML java.sql.SQLException: Internal driver error
(class.java.lang.InterruptedException)
On 3rd attempt,
Processing finished successfully.
This is the scenario that i can see in the audit log.
Can you please help me out in solving this issue.
Thanks,
Soorya

Hi gaurav,
It was a good response from your side.
I have gone through the FAQ but could not able to find anything.
Can you please help me out in this regard ?
Also i am using select query of this kind,
SELECT
SEFVHRC.VHRBRCD,SEFVHRC.VHRCUCD,SEFVHRC.VHRVIN,SEFVHRC.VHRMOCD,SEFVHRC.VHRCHAS,
SEFVHRC.VHRSLOR,SEFVHRC.VHRDIVI,SEFVHRC.VHRMGCD,SEFVHRC.VHRMOCH,SEFVHRC.VHRVHTY,
SEFVHRC.VHRBDTY,SEFVHRC.VHRMFYR,SEFVHRC.VHRMOYR,SEFVHRC.VHRMODS,
SEFVHRC.VHRMDTL,SEFVHRC.VHRCLBR,SEFVHRC.VHRRCID,SEFVHRC.VHRARDT,
SEFVHRC.VHRLUTM,SEFVHRC.VHRLUDT,SEFVHRC.VHRKEYN,SEFVHRC.VHRCTORN,
SEFVHRC.VHRCTIMP,SEFVHRC.VHRPRDT,SEFVHRC.VHRPRDT,SEFVHRC.VHRRCDT,
SEFVHFT.VHFCLCD,SEFVHFT.VHFCAT,SEFVHFT.VHFCADSC,SEFVHFT.VHFKEY,SEFVHFT.VHFTEXT1,
SEFVHFT.VHFTEXT2,SEFVHFT.VHFTEXT3,SEFVHFT.VHFTEXT4
FROM
SAPTESTLIB.SEFVHRC,SAPTESTLIB.SEFVHFT
WHERE
SEFVHRC.VHRVIN = SEFVHFT.VHFVIN AND SEFVHRC.VHRSTTS = ' '
and update query of this kind,
Update SEFVHRC SET VHRSTTS = 'R' WHERE VHRSTTS = ' '
I am using prity big select query. is there any option to optimize it?
Can you please help me out in solving this problem
urs,
Soorya

Error in sender JDBC Adapater

I have a select query as
SELECT * FROM ULIDTA2.F5631505 where QSINTF ='Y'
update query is
Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'
i get the following error in my Adapater .
Sender Adapter v2108 for Party '', Service 'BS_Database_to_RFC_BPM':
Configured at 2006-03-10 12:31:18 GMT+08:00
History:
- 2006-03-10 12:33:06 GMT+08:00: Retry interval started. Length: 60.000 s
- 2006-03-10 12:33:05 GMT+08:00: Error: SQLException during update 'Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'': SQLException: [SQL7008] F5631505 in ULIDTA2 not valid for operation.
- 2006-03-10 12:33:00 GMT+08:00: Processing started
- 2006-03-10 12:32:05 GMT+08:00: Error: SQLException during update 'Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'': SQLException: [SQL7008] F5631505 in ULIDTA2 not valid for operation.
- 2006-03-10 12:32:00 GMT+08:00: Processing started

Hi Amit,
A JDBC sender adapter has 2 essential fields,
1. SQL Statement
2. Update Statement
Your SQL statement will contain your SELECT statement and once your SQL statement is executed, UPDATE statement is executed. This is done so that records that have been selected by the SQL statement should not be selected again as the JDBC sender adapter will poll over the database for every poll interval.
If you want to SELECT something from your Database, then you will have to go for a JDBC sender adapter.
But, if you want to insert/update your Database, then you can go for a JDBC receiver adapter.
Multiple insertions are possible for a JDBC receiver, but multiple Selection queries (different select queries) are not possible for a single JDBC sender adapter.
Just check these links to understand how JDBC adapters work,
If you wanna do update/insert you will have to follow the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm">Document Formats for the Receiver JDBC Adapter</a>
For Configuring the Receiver JDBC Adapter refer:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm">Configuring the Receiver JDBC Adapter</a>
For Configuring the Sender JDBC Adapter refer:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm">Configuring the Sender JDBC Adapter</a>
Regards,
Abhy

We get "uFF06uFF03x0;" from sender JDBC adapter

Thank you.
This is naoki kurihara.
We have a problem in sender JDBC adapter.
We use java mapping and sender JDBC adapter in PI7.1 on Windows.(DB is sqlserver)
and we test the interface and we found error.
the reason is to get "＆＃x0;" from JDBC adapter.
and our java mapping can't parse it. and we got error.
the column is not null.
how we can prevent "＆＃x0;",
(sorry I cant write "＆＃" 1byte word, so I wrote 2bytes word)
please give me your help!!
Thanks

Hi,
Replace the & character with &amp ; in your java mapping. The same goes for these special characters:
< with &lt ;
> with &gt ;
" with &quot ;
' with &apos ;
Please remove the space between the escape character and the ; in your Java mapping. The spaces are typed here because the equivalent characters are not displaying correctly.
It should be able to handle the # though. Hope this helps
Regards,
Mark

Sender JDBC Adapter and Synchronous Interfaces

Hello
I have a Oracle/JDBC -> XI -> ECC/RFC scenario. The communication mode is Synchronous.
In the Oracle database I have a table with a "STATUS" field. When JDBC Adapter Sends the rows from this table to the Integration Engine, it updates the "STATUS" from "G" (GENERATED) to "R" (READ).
The response from the RFC contains for each row sent to RFC a "STATUS_from_RFC" field, that I would like to use to update Oracle STATUS field to "S" (SUCCESS) or "E" (ERROR).
Can the Sender JDBC Adapter use the response from the Synchronous RFC to update Oracle "STATUS" field itself ?
Or do I need a Receiver JDBC Adapter? In this case, I have to use asynchronous communication and BPM, ok ?
thanks
Julio

Bhavesh,
>>>But, the online help states it supports QOS of BE and so it does support Synchronous Processing.
Even File adapter has QOS of BE
To my understanding response back is possible only if it is PUSH + Sync
Adapters PUSH + Sync
HTTP
SOAP
RFC
XI
etc...
For the above response is possible
Adapter PULL + Sync
File
JDBC
etc..
In general there can be a response if there is a request. In the case of File and JDBC there is no request message coming to the adapter, its the adapter which is actually requesting.
This is just an idea and my understanding.. might not be true If possible do try it and let everyone know I will also give it a try when time permits
Thanks,
Prakash

Sender JDBC adapter SELECT / UPDATE issue - updates more rows than selected

Hi,
We have configured a Sender JDBC Adapter to poll records from an Oracle table based on a flag field and then update the flag for the selected records. When tested in DEV and QA environments (where test data comes in intermittently and not in huge volumes), itu2019s working fine.
Both SELECT and UPDATE queries written in the Sender JDBC adapter are getting properly executed and are changing the status of the flag for the selected records from Y to N once read from the database.
select * from <table> where flag = 'N'.
update <table> set flag = 'Y' where flag = 'N'.
But in the PROD environment (with records getting updated in the database every second), after XI executes the SELECT query and just before the UPDATE query is executed, new records come into the Oracle table with status flag 'N". So when the UPDATE query runs just after the SELECT query, then these unselected records also get updated to 'Y'. Thus these records never get into the resultset and hence XI and thus remain unprocessed.
So when XI does a SELECT and UPDATE on the Oracle DB table and concurrently there is an INSERT happening into the table from the other end, the JDBC sender adapter is picking up a certain number of records but updating the status of more records than it picked up.
So how does XI deal with such a common scenario without dropping records?
Thanks,
Vishak

The condition being checked is the same for both SELECT and UPDATE statements.
Initially I tried setting transaction isolation levels on the database to repeatable_read and serializable but it was throwing me a java.sql.SQLException error saying that these transaction levels were not valid.
I asked for these transaction level permissions for the XI user from my DBA but the DB I am accessing provides only a view into other databases and so it's not possible.

Sender JDBC Adapter in a synchronous szenario

Hi,
i am trying to set up following szenario:
A JDBC Sender Adapter is polling data from a database, this data is beeing mapped to a synchronous RFC-Call to the R/3 backend. The result from the RFC-Call contains an order-number, which should be stored in the database.
The query of the DB and the rfc-call works fine. The query is also doing the UPDATE statement to the DB, marking this line of data as beeing processed.
The QOS in the sender-jdbc-adapter is set to "Best Effort", which should allow a synchronous communication.
I am mapping the response of the rfc-call to a jdbc-receiver-like structure, in the monitoring i can see the rfc-result and also the message to update the databae. There are no errors in the adapter-monitoring and everything looks fine, except that the database is not beeing updated.
Is there another messageformat for the synchronous answer to a sender-jdbc-adapter? Or is it possible, that the commit for the answer is not beeing sent?
We have an XI3.0 with SP16 installed.
Thanks for your help.
Ingo

hi,
you cannot use the Sender JDBC adapter to Upate.
Create a receibver JDBC adapter with the format as mentioned and use it to update the DB.
the steps in BPM wil be ,
1. Receive -- for Sender JDBC adapter
2- Send Synchronous -- RFC call synchrnous
3 - Send -- using Receievr JDBC adapter to Insert / Update the DB.
Do let me know if u need further info,
regards,
Bhavesh

Executing an Oracle Stored Procedure from Sender JDBC adapter

I could really use some help from someone who had done this before.
I've read the help about using the JDBC sender adapter, but it's not helping enough.
I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
That's definately what we want to do, but we can't figure out the syntax.
The procedure in oracle looks like this:
CREATE OR REPLACE PROCEDURE test_ref_cursor
( cur_generic IN OUT result_sets.cur_generic)
as
BEGIN
Open cur_generic for
select
 proposal_number,
 to_char(sequence_number),
 column_name,
 column_value,
 update_timestamp,
 update_user
 from
 coeus.sap_test;
END test_ref_cursor;
And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure? Or is there something wrong with the procedure that is causing the error?
I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.

Hi Vanda,
Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
There are 2 possible ways you can accomplish this:
1. Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
2. Develop a user-module for the adapter, which can be used with a sender adapter.
Thanks
Prasad

Error in configuring JDBC Adapter

Hi All,
I have configured a sender JDBC Adapter with the following parameters.
JDBC Drivers: com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection: jdbc:microsoft:sqlserver://MIS-SERVER\MIS_DEV_SVR;DatabaseName=SEPG_NEWDB
But in Runtime, I am getting error as follows...
Error during database connection to the database URL 'jdbc:microsoft:sqlserver://MIS-SERVER\MIS_DEV_SVR;DatabaseName=SEPG_NEWDB' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://MIS-SERVER\MIS_DEV_SVR;DatabaseName=SEPG_NEWDB': SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]The requested instance is either invalid or not running.'
It has been confirmed that JDBC Drivers are properly deployed.
Any suggestions to resolve this issue?
Regards
Pavan

Hi Pavan,
I think Port is missing and also it should be look like this. (microsoft not required for SQL SERVER 2000).
Make sure msbase.jar, msutil.jar, mssqlserver.jar are the driver files and deployment.
Connection: jdbc:sqlserver://MIS-SERVER\MIS_DEV_SVR:PORT;DatabaseName=SEPG_NEWDB
Regards,
Sarvesh

Error at sender JDBC communication channel

Dear All,
While executing JDBC(MS-Access)-PI-RFC interface, we are getting error in sender JDBC communication channel. The error is as following:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=
sappidev\Datatran\Database.mdb' using the JDBC driver 'jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Can not establish connection:: SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'.
I have checked various posts on forums and as per those no drivers installation is required to access MS-Access database and I am not able to find any post which could solve my problem.
Kindly guide me on what might be the problem and how this can be resolved.
Regards,
NJ

Hi Nishu,
That error ALWAYS means your DSN name is incorrect or can't be accessed for some reason (permission). The ODBC part says that the bridge is working.
But that DSN is 100% wrong or cannot be seen by the user account that the server is running as. Make sure you have a system DSN and not a user one.
You can refer these....
http://bytes.com/topic/java/answers/625400-java-sql-sqlexception-microsoft-odbc-driver-manager-data-source-name-not-found
http://www.daniweb.com/forums/thread13092.html#
Hope this will help you....
Regds,
Pinangshuk.

RWB error in Sender JDBC adapter

Similar Messages

Maybe you are looking for