RWB-Mesg Monitoring-Adapter Engine-Message Retention is only 1or2 days

Hello Experts,
I have a an Integrated Scenario, SOAP to RFC, in my landscape. As you know I can only monitor messages for an Integrated Scenario in Runtime Workbench -> Message Monitoring -> Adapter Engine. So, when I find my message related to the Integrated Scenario and click on "Message Details" I am not able to view the payload for any of these messages. I am sure there is somewhere on the Java stack flip the switch to view payload but not sure where. Any kind of help would be greatly appreciated.
Thank you!!

Please follow steps as below...
1. Open http://server.domain.ext:5XX00/dir/start/index.jsp (Please modify according to your server name, domain URL and Port)
2. Navigate and open Runtime Workbench after you log on
3. Navigate and open Message Monitoring
4. Select appropriate Messages from Component: and From
5. You will able to see Refresh button then | View: and Time:
5. Drop down Time: and you will able to do selection there Hourly, Daily, Weekly, Monthly and Yearly...
Please let me know if you have any other question.
Regards,
Yogesh Patel

Similar Messages

PI 7.1/RWB/Component/Monitoring/Adapter Engine/Test Message/403 Forbidden

Hello guys!
During performing PI 7.1 Readiness Check I have to perform a test message under Runtime Workbench\Adapter Engine\Test Message.
After processing i receive following error:
Error while sending message: 403 Forbidden.
Does anybody know the cause?
Many thanks in advance!
Jochen

Hi Sreeni!
Direct hit!
This was the problem! Missing role!
Many thanks to you!
Additional Information for all:
Readiness Check (PDF)
A compilaton of simple and advanced checks for Process Integration 7.1 (PI 7.1)
Page 44
SAP Note 817920 - XI Readiness Check 3.0/7.0, 7.1
Regards,
Jochen

Error in RWB - Component Monitoring - Adapter Engine

Hi,
After we install an Additional Application Server Instance, we are facing an issue with the Runtime Workbench, specifically with the Adapter Engine status.
On the RWB we're have this error:
Ping Status: Unable to establish connection to
"http://<Additional AS Host>:<Central Instance JAVA Port>/AdapterFramework/rtc"
All the time it's pointing to the Additional AS with the Primary AS Java Port.
We are using a central SLD in PIP system.
We already reviewed, the point 8.12 of the "SAP NetWeaver PI 7.1 Including SAP EHP 1 - Troubleshooting Guide"
Any idea to solve this?
Regards,
GCC PI

Hi GCC,
Please change in the http://<host>:<j2ee_port>/exchangeProfile this settings:
Exchange Profile
Connections:
- com.sap.aii.connect.directory.name
- com.sap.aii.connect.landscape.name
- com.sap.aii.connect.repository.name
RuntimeWorkbench:
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
Please change the value in the:
Config Tool -> cluster-data -> Global Server -> Configuration ->
Services -> com.sap.aii.af.cpa.svc ->
   SLD.selfregistration.hostName
   SLD.selfregistration.httpPort
   SLD.selfregistration.httspPort
Also see notes: #1113161 - Links in Component Monitoring not working
and #764176 - Error in XI due to inconsistent SLD contents
After that, please restart the j2ee engine.
Regards,
Luis Diego

In RWB----component monitoring --adapter engine-- status

Hi ,
In the Runtime work bench component monitoring if we click on adapter engine we get two tabls
CCMS Status: Last Retry Jan 26, 2011 1:55:15 PM CET Ping and Self-Test Help
Ping Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details
Self-Test Status: HTTP request failed. Error code: "404". Error message: "Not Found [http://lYYYY:ZZZZ/AdapterFramework/rtc]" Last Retry Jan 26, 2011 2:03:05 PM CET ... Details

Hi Sandeep,
Besides updating the patch level to the latest and ensure the SP are in the same level, the notes I would recommend would be:
#1285224 - Http 404 error in details display for Adapter Engine
#804124 - HTTP communication with XI Adapter Engine fails (this one you have already mentioned)
Hope it helps too
Regards,
Caio

PI 7.1 - Message Monitoring - Adapter Engine (Database Overview)

Hi Friends,
In Message Monitoring --> Adapter Engine --> Database (Overview) is not working. It throws the following error message.
no_connection Exception Message: RemoteException in Method: CentralViewManager: getIProfiles( IApplication, boolean ). Communication-related failure. Message: java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: An error occured while reading data from the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document. The error was: com.sap.security.core.server.destinations.api.DestinationException An error occurred while reading the destination sap.com/com.sap.aii.af.service.profile.proxy/com.sap.aii.af.service.statistic.proxy.ProfileProcessor/basicPort_Document, type WebService. The error was Internal error during the decryption process...
But, Adapter Engine --> Database option is working. What could be the problem ?
Kindly clarify, friends.
Kind regards,
Jegathees P.

Hello friend,
May be it is related with connection problem check with your basis people .
Regards,
Ravi.

Cannot see adapter engine messages in message monitoring

hi guys,
i cannot see my adapter engine messages in message monitoring for my http to RFC syncronous scnenario.
i can however see the integration engine messages and can also see the receiver RFC channel in communication channel monitoring

Hi
this link ll help u in it -
Adapter Engine monitoring is provided in detail. Try as mentioned
http://help.sap.com/saphelp_nwpi71/helpdata/EN/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Regards

Component monitoring - adapter engine error, but no channel in error actual

Hi,
We have a problem in displaying a status of Adapter Engine in RWB. In component monitoring there's a red light and the status - "Are communication channels without errors?" says there's an communication channel in error. But when I click the Communication channel monitoring, everything's green there. Yes, there was an error before, but it's ok now. Why is the AE item in Component monitoring still red? How to make it to reflect the current status?
Thank you,
Olian

Hi Olian,
i am saying to use the cache connectivity test button option from RWB -> compnent monitoring , so have you done cache test using this? if yes, click on refresh display to see the latest adapter engine status..............if it is green, then it is okay..............but if it is red here, it means some comm channel is erroring sometimes - i guess it can be a file adapter using ftp or some rfc adapter......................
if it is green here and compnent monitoring - adapter engine status is red because some comm channel errored in past.........then i think some cache is not getting refreshed - i do not know exactly how to rectify it...........but i can tell you some workaround for it..............the comm channel which was erroring just stop it from comm channel monitoring........then close RWB and again open it and see compnent monitoring - adapter engine status again in it - i think it should be green now.......or try by changing any comm channel description data in ID and save and activate it.........then again check your compnent monitoring - adapter engine status..................but dont worry i think this is a temporary problem
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Mar 26, 2008 11:50 AM

RWB - Component Monitoring - Integration Engines = none ???

Hi.
I made a Business System in SLD.
Name: DEV_410
Role: Application System
Related Integration Server: XHD_100       (XI Server)
Technical System: DEV on dev60           (type: Web AS ABAP)
Client: 410 of DEV
Logical System Name: HMXDEV410
But I cant see the business system in RWB - Component Monitoring - Integration Engines. There shoud be 'Proxy Runtime DEV_410' in Integration Engines, I think.
Is there any wrong in SLD or RWB?
Thanks in advance.
sjyoon.

Hi
Go to SLD select your business system :DEV_410
And check the following entries for your business system
Role:   Application Server
Related Integration Server : (Check if this value correctly configured to your Integration Server client)
If this configuration is correct, this means XIRWBUSER is able to connect to the proxy runtime of application systems(DEV_410). Then there will be no entries displayed under RWB - Component Monitoring - Integration Engines in RWB.( that is how my RWB component monitoring is configured)
Only error entries are displayed under RWB - Component Monitoring - Integration Engines in RWB. Say for example XIRWBUSER is not able to connect to the proxy runtime of application systems(DEV_410). Then you see a entry in RED below your RWB - Component Monitoring - Integration Engines
Satish

Adapter Engine Message Archiving

Hello,
Can anybody share with me the guide for Adapter Engine Message archiving for PI 7.1
Thanks ,
Loveena

Hi,
Refer these links, it should help
XML Data Archiving - Configuration Guide for J2EE Applications
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/65901c2e-0801-0010-e79a-de4ed9275d70?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/EN/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
Re: Archiving message PI7.1 Could not find msg in archive error
Regards,
Nithiyanandam

Authorizatoin error while viewing adapter engine messages

I got below error from user and need to resolve.
When I try and view adapter engine messages in XI Development system, I get the message "noAuthorizationJava"

hi
see this
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
also sap note 768456 - 928862
Thanks
Rod
Edited by: Rodrigo Pertierra on Mar 27, 2008 11:24 AM

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

Ping error in RWB for J2SE Adapter Engine

Hi,
we have several external J2SE adapter engines and they function great other than from a monitoring perspective. In RWB "Ping Status" I'm getting the following:
HTTP request failed. Error code: "401". Error message: "Authorization Required"
Suggestions?
Cheers,
Mattias

<u>This is not an answer to your question.</u>
I've tried to get an answer for: how to register J2SE adapter with Integration Server ?
I tried using SLDAccess service on J2SE adapter with no luck (with this J2SE Adapter Engine is registered in the SLD). My J2SE adapter was never available in the configuration means, in the communication channel ex: file adapter, for the adapter engine drop down all I have is Integration Server, my J2SE adapter was never listed there.
If you know an answer please post.
thanks
SKM<u></u>

JBBD Sender - Problem with Adapter Engine - Message status Delivering -

Hi all,
I've a rare problem. My scenario is JDBC (EO) to IDOC. If the SELECT query from SQL database arrows 8000 lines, the message was sent from PI to R/3 succesfully and Idocs was generated.
But if the query is larger than 10.000 lines, the message was stopped in the sender queue in AE with status "Delivering". In SXMB_MONI I can't see the message, only in RW in Message Monitoring or Component Monitoring in Engine Status.
I've applied note Note 937159 - XI Adapter Engine is stuck, and follow this blog
/people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
Using Configtool I modified these parameters (MaxConsumers). But message still puts in sender queue.
I have in PI 7.1 SPs 0004.
Any suggestions??
Edited by: Pablete on Sep 13, 2010 8:41 PM

I have the same requirement and for solving this, I have to apply a very complex select statement.
But it works perfekt for MS SQL:
select * from table where order_no in (SELECT distinct top(1000) order_no FROM table where any_clause) and any_clause order by order_no
update table where invoice_no in (SELECT distinct top(1000) invoice_no FROM table where any_clause) and any_clause
I create an IDoc for each order_no, so I have to make sure, that all lines belonging to one invoice are in the same select.
My select statement has 463 characters

Adapter engine messaging URL returns HTTP 403

Hi all,
I currently have a problem with the following scenario: SOAP Adapter -> XI -> JDBC Adapter. I have configured the scenario and everything seems to be running correctly (in the component monitoring the adapters and the integration engine are green). However when I send a request to the SOAP Adapter I get the following response:
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>DeliveryException</code>
                         <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
     at
Caused by: com.sap.aii.messaging.srt.BubbleException: failed to call the adapter engine [null "null"]; nested exception caused by: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 403.
</text>
</s:SystemError>
In the Message Display tool of the runtime workbench I get the following trace:
2005-06-05 11:03:08 Success SOAP: request message leaving the adapter (call)
2005-06-05 11:03:08 Success Application attempting to send an XI message synchronously using connection AFW.
2005-06-05 11:03:08 Success Trying to put the message into the call queue.
2005-06-05 11:03:08 Success The message was successfully retrieved from the call queue.
2005-06-05 11:03:08 Success The message status set to DLNG.
2005-06-05 11:03:08 Success Message successfully put into the queue.
2005-06-05 11:03:08 Error Returning synchronous error notification to calling application: Received HTTP response code 403..
2005-06-05 11:03:08 Error Transmitting the message using connection http://<host>:8000/sap/xi/engine?type=entry failed, due to: Received HTTP response code 403..
2005-06-05 11:03:08 Error The message status set to FAIL.
2005-06-05 11:03:08 Error Returning to application. Exception: Received HTTP response code 403.
So it seem that somehow the adapter framework is not allowed to send a message to the integration engine via the messaging URL.
Any ideas how to resolve this problem?
Thanks for you help,
Christian

Hi,
If you've changed the passwords for XI service users
then you may also want to check this note: 721548
XI 3.0: Changing the passwords of the XI service users
Regards,
michal

Monitoring Adapter Engine J2SE

Hi,
I have setupt he SLD Accessor on the J2SE Adapter Engine. If one check in the log the connecting to the SLD is successful.
Also the Adapter Engine is registered in the SLD as type XI Adapter Engine in Technical Systems > Process Integration.
I can also see this J2SE Adapter Engine in the RWB. However the LED is red and the error status is "Unable to establish connection to "https://"hostname":-1/rtc.
Please can you assists to resolve this matter.
Much appriciated.
Regards
Willie Hugo

Hi ,
Please change in the http://<host>:<j2ee_port>/exchangeProfile this settings:
Exchange Profile
Connections:
- com.sap.aii.connect.directory.name
- com.sap.aii.connect.landscape.name
- com.sap.aii.connect.repository.name
RuntimeWorkbench:
- com.sap.aii.rwb.server.centralmonitoring.r3.ashost
Please change the value in the:
Config Tool -> cluster-data -> Global Server -> Configuration ->
Services -> com.sap.aii.af.cpa.svc ->
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
Also see notes: #1113161 - Links in Component Monitoring not working
and #764176 - Error in XI due to inconsistent SLD contents
After that, please restart the j2ee engine.
Regards,
joel

RWB-Mesg Monitoring-Adapter Engine-Message Retention is only 1or2 days

Similar Messages

Maybe you are looking for