RWB / SLD Registration / MsgUrl is null?!?

Hi there,
i have a Problem. when i go to the SLD Registration in the RWB to Register
Runtime Workbench
Repository
I Become the Message:
Runtime Workbench reports registration status: completely registered
XIDomain.IntegrationServer.MsgUrl: MsgUrl of Integration Server is.00.server1 is null.
XIDomain.IntegrationServer.SecureMsgUrl: SecureMsgUrl of Integration Server is.00.server1 is null.
XIDomain.IntegrationServer.BusinessSystem: BusinessSystem is null. No BusinessSystem associated to the Integration Server is.00.server1.
also on the Adapter Engine
Messaging URL of Integration Server: URL currently used by Adapter Engine is null!
Messaging URL of Integration Server: URL stored in SLD is null!
Messaging URL of Integration Server: URL currently used by Adapter Engine and URL stored in SLD are the same
XIDomain.IntegrationServer.MsgUrl: MsgUrl of Integration Server is.00.server1 is null.
XIDomain.IntegrationServer.BusinessSystem: BusinessSystem is null. No BusinessSystem associated to the Integration Server is.00.server1.
The directory is another message:
Directory: Unable to get directory instance and read data from SLD; details: Unable to create an object that represents the SLD entry for the XI component
Can someone help here?
Regards
Edited by: Bjoern Bayerschmidt on Jun 2, 2010 8:55 AM
Edited by: Bjoern Bayerschmidt on Jun 2, 2010 8:56 AM

and you looked at both notes?
all of this was provided in the two notes in my first post..... if this did not work.....
Solution
Checking completeness and consistency of SLD
First check whether the PI structures in SLD are incorrect. Start the SLD user interface (http:<host name>:<port>/sld), navigate to Technical Systems --> Process Integration
For a correct PI registration, the tabular display of the PI structure must contain the following entries:
- One entry for the domain of the Integration Server
- One entry for each PI component: Integration Server, Adapter Engine, Directory, Repository and Runtime Workbench (RWB). Each must be assigned to the domain above, i.e. the domain name must appear in column "Domain".
If some of the PI components Adapter Engine, Directory, Repository or Runtime Workbench are missing in the table, you need to explicitly register those as described below. If they appear in the table, but are not assigned to a domain, you have to delete them and register them explicitly.
Deleting PI components
Navigate to
Technical Systems --> Process Integration
Select the components you want to delete, push "remove" button.
Beware: Do not accidentally delete the XIIntegrationServer.
Triggering SLD Registration of PI components
You can trigger registration of a PI component by restarting the associated application. Navigate to the start/stop UI in the Netweaver Administrator:
http:<host name>:<port> --> SAP Netweaver Administrator --> Configuration Management --> infrastructure --> application modules
Here you restart the applications for the missing PI components:
com.sap.xi.directory (Integration Builder/Configuration)
com.sap.aii.af.app (Adapter Engine)
com.sap.xi.rwb (Runtime Workbench)
com.sap.xi.repository (Integration Builder/Design)
this is why i gave both notes as the information you provided was far from complete...
what version are you using? is it a new install? or a restore? or did it just go like this???

Similar Messages

PIRWBUSER / not enough Permissions / SLD Registration / Adapter Engine / PI

Hi Community,
i have a Problem. I go to the SLD Registration in the RWB
When i click on Adapter Engine and Register i become the Message
Adapter Engine P11 (HOST): Unable to get Adapter Engine instance and read the data from SLD; details: Cannot connect to component Adapter Engine P11 (HOST); user PIRWBUSER does not have sufficient authorization to call servlet at URL http://HOST:50000/AdapterFramework/regtest.
My PIRWBUSER has the following Roles:
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Can someone help here?
Regards
Bjoern

Hello!
Apply the note below according to your system version:
999962 - PI 7.10: Change passwords of PI service users
936093 - XI 7.0: Changing the passwords of XI service users
721548 - XI 3.0: Changing the passwords of the XI service users
If not worked, try working with the SAP_ALL and check if works.
Regards,
Caio Cagnani

SLD registration for TREX not working...

SDN Members,
I am unable to register TREX in SLD. I have put in an OSS message; however, I have yet to receive a response back from SAP... So any help would be much appreciated.
Thanks,
-Patrick
Steps for the Reconstruction
1. Generate SLD Configuration file:
sldreg -configure /usr/sap/TXD/TRX85/slddest.cfg
2. Copy the SLD Config. File to the Global SLD Directory and run
command (to transfer data to SLD):
saposcol -b | sldreg -connectfile slddest.cfg -stdin -oldtransferdtd
Receive the following:
(hostnames, ip's, and ports altered to protect the innocent)
prtdiag can only be run in the global zone
Thu Dec 27 10:33:04 2007 SLD Registration Program [2.0] (May 8 2006) [None Unicode]
Thu Dec 27 10:33:04 2007 No XML data input file set. Will read input data from standard input.
Thu Dec 27 10:33:04 2007 Supplier Name: ComputerSystem / Supplier Version: 1.0 / Supplier Vendor: / CIM Model Version: 1.3.21
Thu Dec 27 10:33:04 2007 Group:
Thu Dec 27 10:33:04 2007 Group name system1
Thu Dec 27 10:33:04 2007 validateAttributes OK
Thu Dec 27 10:33:04 2007 Property Status
Thu Dec 27 10:33:04 2007 Value OK
Thu Dec 27 10:33:04 2007 Property NameFormat
Thu Dec 27 10:33:04 2007 Value IP
Thu Dec 27 10:33:04 2007 Property Caption
Thu Dec 27 10:33:04 2007 Value hostname01
Thu Dec 27 10:33:04 2007 Property Name
Thu Dec 27 10:33:04 2007 Value usahstxutxd01
Thu Dec 27 10:33:04 2007 Property IPAddress
Thu Dec 27 10:33:04 2007 Value X.X.X.X
Thu Dec 27 10:33:04 2007 Property OpSysReleaseName
Thu Dec 27 10:33:04 2007 Value SunOS
Thu Dec 27 10:33:04 2007 Property OpSysCategory
Thu Dec 27 10:33:04 2007 Value Solaris
Thu Dec 27 10:33:04 2007 Property VendorRelease
Thu Dec 27 10:33:04 2007 Value SunOS 5.10
Thu Dec 27 10:33:04 2007 Property CPUType
Thu Dec 27 10:33:04 2007 Value sun4v
Thu Dec 27 10:33:04 2007 Property MachineCategory
Thu Dec 27 10:33:04 2007 Value SPARC
Thu Dec 27 10:33:04 2007 Property OpSysBits
Thu Dec 27 10:33:04 2007 Value 64
Thu Dec 27 10:33:04 2007 Property NumberOfCPUs
Thu Dec 27 10:33:04 2007 Value 32
Thu Dec 27 10:33:04 2007 Property CPURate
Thu Dec 27 10:33:04 2007 Value 1200
Thu Dec 27 10:33:04 2007 Property PhysicalRAMInMB
Thu Dec 27 10:33:04 2007 Value 65528
Thu Dec 27 10:33:04 2007 Property VirtualRAMInMB
Thu Dec 27 10:33:04 2007 Value 87224
Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
Thu Dec 27 10:33:04 2007 HTTP trace: false
Thu Dec 27 10:33:04 2007 Data trace: false
Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
Thu Dec 27 10:33:04 2007 *** Start SLD Registration ***
Thu Dec 27 10:33:04 2007 Used URL: http://hostname01:50000/sld/ds
Thu Dec 27 10:33:04 2007 HTTP open status: true - NI RC=1
Thu Dec 27 10:33:04 2007 HTTP send successful.
Thu Dec 27 10:33:04 2007 Return code: 401 --- Return message: (Unauthorized)
Thu Dec 27 10:33:04 2007 HTTP response: Failure. HTTP status code: 401
Thu Dec 27 10:33:04 2007 *** End SLD Registration ***
Thu Dec 27 10:33:04 2007 Data send status: false
Consequently SLD is not updated with TREX information. Using IE I can go to
the url http://hostname01:50000/sld/ds , get popup asking for
credentials (we log in using SLDDSUSER account - w/ Basis Admin level
auth.), and we receive: Page Cannot be displayed (HTTP 400 - Bad Request
Internet Explorer ).
If we go to http://hostname01:50000/sld and login with the same
account (SLDDSUSER) we see the full SLD Toolset.
Edited by: Patrick Riggins on Dec 27, 2007 6:06 PM

UPDATE:
We were able to work through and
resolve the error we initially posted in this Thread. Now we run sldreg
and all looks good; however, we are seeing nothing in SLD (on our XI
System) even after stop/restart of SLD Server:
Steps for the Reconstruction
1. Generate SLD Configuration Files:
sldreg -usekeyfile -configure /usr/sap/TXD/TRX00/slddest.cfg
2. Copied files to Global SLD
/sapmnt/TXD/global
3. Run command to transfer data to SLD:
saposcol -b | sldreg -user <user acct> -pass <password> -host
<hostname> -port <port #> -datatrace -httptrace -
logfile /usr/sap/TXD/TRX00/sld_reg.log -stdin
Looks successful:
Thu Dec 27 20:31:06 2007 HTTP body length: 0 --- HTTP body: empty
Thu Dec 27 20:31:06 2007 Return code: 200 --- Return message: (OK)
Thu Dec 27 20:31:06 2007 HTTP response: Success. HTTP status code: 200
Thu Dec 27 20:31:06 2007 *** End SLD Registration ***
Thu Dec 27 20:31:06 2007 Data send status: true
However in SLD , under content maintenance selecting "All With
Instances" in the dropdown list and "Class" , no TREX Services showing.
And no technical system showing for TXD (TREX System)

IR, RWB,SLD - Opening in English & ID in German

Dear all,
The XI Server which we are using has a peculiar problem.
IR, RWB, SLD and all other applications open in English, where as Integration Directory (ID) opens up in German.
What could be the problem here? Can anyone guide me with the step by step procedure to resolve this issue.
Thanks in advance,
Younus

Hi,
concact your basis admin people they will change the exchange profiler or do this thing
Go to xi home page->Administration->ExchangeProfile->IntegrationBuilder->IntegrationBuilder.Directory
Check the parameter com.sap.aii.directory.serviceuser.language.
regards,
Surya

Initial Setup Problem - Starting the SLD Registration process

Hi,
we are installing our PI development system. During initial configuration with "NWA --> Configuration Management --> Scenarios --> Configuration Wizard --> Netweaver initial setup" the wizard stands still at Step 68 (of 561) "Starting the SLD Registration process".
We have restarted the system but after starting again the wizard it stands still again.
Same problem on our PI quality assurance system.
PI 7.11 on Windows 2008 R2 with MSSQL 2008 R2.
Steps of installation:
1) Installation of PI 7.11
2) Postworks ABAP (License, TMS, Profiles, rz04, ...)
3) Kernelupdate to 106
4) Updates SPS7 ABAP
5) Updates SPS7 JAVA
6) Run NWA Initial Setup with J2EE_ADMIN
Could someone help?
Thanks
Regards
Thomas Mühl

Then possibly the password was set wrong somewhere (since the "-" character is not blocked). Its advisable to check all service users passwords, to prevent other issues like this one to occur. Please check the OSS note "999962 - PI 7.10: Change passwords of PI service users" for more information on this.

Sld registration

Hi all,
after running note 764176 I can now only see my DEV and QA objects in my master SLD.
My PROD components (adapter engine, integration server etc.) are not self registrering in the Master SLD.
How could I make this happen? (I would like my master to have ALL the components, and then trasnport the PROD components to the my slave SLD)
Thanks!

UPDATE:
We were able to work through and
resolve the error we initially posted in this Thread. Now we run sldreg
and all looks good; however, we are seeing nothing in SLD (on our XI
System) even after stop/restart of SLD Server:
Steps for the Reconstruction
1. Generate SLD Configuration Files:
sldreg -usekeyfile -configure /usr/sap/TXD/TRX00/slddest.cfg
2. Copied files to Global SLD
/sapmnt/TXD/global
3. Run command to transfer data to SLD:
saposcol -b | sldreg -user <user acct> -pass <password> -host
<hostname> -port <port #> -datatrace -httptrace -
logfile /usr/sap/TXD/TRX00/sld_reg.log -stdin
Looks successful:
Thu Dec 27 20:31:06 2007 HTTP body length: 0 --- HTTP body: empty
Thu Dec 27 20:31:06 2007 Return code: 200 --- Return message: (OK)
Thu Dec 27 20:31:06 2007 HTTP response: Success. HTTP status code: 200
Thu Dec 27 20:31:06 2007 *** End SLD Registration ***
Thu Dec 27 20:31:06 2007 Data send status: true
However in SLD , under content maintenance selecting "All With
Instances" in the dropdown list and "Class" , no TREX Services showing.
And no technical system showing for TXD (TREX System)

Delete SLD Registration in RWB

Hi,
I would like to delete the component Name (Adapter Engine) listed in Non-central components, as the host name/system doesn't exists anymore. The reason I would like to delete is, whenever we make the changes to any IB objects, save and activate and error messge pops up with this host name.
Thank you

Go to SLD -> Technical Systems -> Technical System Type (process integration) ->
If you find the relavent adapter engine.. remove it and try..
http://wiki.scn.sap.com/wiki/display/XI/How+to+Manually+Correct+the+Registration+of+XI+Components+Within+the+SLD

J2EE SLD registration

I want to register a J2EE instance into a SLD that runs on a separate XI instance. The registration of the XI J2EE instance itself into the SLD works fine but when i register the other J2EE instance with exactly the same parameters in the SLD the following error is reported: 'Invalid HTTP connect data'.
Any help is appreciated,
Jack

Hi Pascal,
I did that, now when I run dtr.bat I receive this message:
dtr is DTR's client tool for the command line.
It can be used in 2 modes
- As a simple command line client
- As a shell
The shell can be started using dtrshell
In both these modes the user will require to logon through a popup unless the co
mmands being used do not connect to the DTR server(Exa: help command).
If it is required that the login popup does not appear then one of the following
should be true.
1. The vfs config folder should have a user.xml file.
2. The username & password should be specified using the following commandline o
ptions:
    a. --username/-un <username>
    b. --password/-pwd <pwd>
Note that if only the user name is specified as commandline argument even then t
he user will be asked for the password via a popup.
using the -def option the client to be used can be specified
Once in the shell all commands can be used without using dtr before them
Try:
dtr help simple         list most common commands
dtr help commands       list all commands
dtr help command        help on a specific command
dtr help usage          generic command line arguments
dtr help configure      lists properties to cinfigure commands/options
Commandline client Version : 1.60
And When I run dtrshell.bat I receive login screen and when I enter valid credentials I receive this exception:
>Initializing...
>This may take a few seconds. Please wait...
>Connecting to client ""
Exception in thread "main" java.lang.IllegalStateException: The client specified
is not correct or there is no active client present
        at com.tssap.dtr.client.commandline.Cache.getContext(Cache.java:143)
        at com.tssap.dtr.client.commandline.Cache.initialize(Cache.java:49)
        at com.tssap.dtr.client.commandline.Cache.getCache(Cache.java:63)
        at com.tssap.dtr.client.commandline.DTRShell.main(DTRShell.java:79)

Problem during installation. sld registration

Hello,
I'm installing a SAP ERP 2005 system. The installation is stopped when sapinst try to register the system in the SLD. (SLD on solution manager 4.0).
Here is the errors from the log:
FRF-0007 (Unable to open RFC connection)
MUT-03025 (Name or password is incorrect).
Connection to http://hostname:50000/sld/admin with user J2EE_ADMIN is ok.
Any ideas?
Does problem come from a bad password entered in sapinst at the beginning?
Could anyone tell me how to force sapinst to enter new sld informations again without restarting all the installation? Note that I've exactly the same problem with another similar installation which also use the same SLD.
Many thanks for your support!
Vanderperre Olivier

My problem is solved!
Sapinst tried to execute the RFC connexion with DDIC on client 300 witch was empty at this moment. I changed to use 001 and the installation finished successfully.
Best Regards,
Vanderperre Olivier

SLD Registration in SRM

Hi All,
While installing our SRM server we chose "no SLD". We planned to register the SLD in SOLMAN later on. Currently SRM SLD is
up and running, but there are no data supplier in AS ABAP. We tried to run RZ70 by pointing to SRM Host And Gateways. It fails.
While RZ70 runs fine if we point to SOLMAN.
We want to understand how to register SLD of SRM in SOLMAN or if not needed can we have a local SLD in SRM configured now?
As we will be using EP 7.0; SLD is an integral part to make the things happen.
Some technical help or suggestions will be ueful for us.
Thanks & Regards,
Ishan

Dear Ishan,
First of all you need to check your landscape design blueprint. If you are going to have a central SLD which is not going to be on your SRM system itself then you can configure your SRM data suppliers to the central system's SLD itself.
However, if you want to configure the data suppliers to your SRM system itself then first check what is the result on the page http://<hostname>:<port>/sld
As SLD should be installed by default so you would just need to do the SLD configuration as per the post-installation guide available at System Landscape Directory (SLD)
This should help you out.
Regards,
Abhishek

Run time work bench error in PI EHP1

Dear All ,
when i go to runtime workbench & clicked on SLD registration .its showing red mark . Kindly help on this
Below is the error which i got from the details .
(XIDomain.IntegrationServer.SecureMsgUrl: SecureMsgUrl of Integration Server is.00.hostname is null. )
Thanks in advance .

Hello,
double check the PI Exchange Profile parameters are maintained correclty
for example- com.sap.aii.connect.landscape.name
Have a look into this thread as well,
Re: RWB / SLD Registration / MsgUrl is null?!?
regards,
francis

Cache Disable problem in firefox35

i have aspx pages and i wrote Dim pstr As String = "private, no-cache, no-store ,pre-check=0,post-check=0,must-revalidate"
Response.AddHeader("Cache-Control", pstr)
Response.AddHeader("Pragma", "no-cache")
Response.AddHeader("Expires", "0")
Response.Cache.SetNoStore()
but the page is caching and can reload

Hi
There are few more places to check i think
1) go to RWB >> Cache Monitoring >> see both the notification table and cache status table. You find more clues to what is wrong.
2) Go to RWB >> SLD Registration (this is on PI7.11, not sure on previous versions) >> select Adapter engine >> there are several Cache notifications there. They should be all green
Kr
Robert

Efw cache update

My installer won't work to download applications anymore. I get an error message that it quit unexpectedly, the problem details are pasted below. I accidentally deleted my system caches in addition to my internet caches a few weeks ago, and i assume that's why. If anyone knows what I can do to fix this it would be so helpful, thanks!
Process:         Installer [1407]
Path:            /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer
Identifier:      com.apple.installer
Version:         5.0.1 (538)
Build Info:      Installer-538000000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [130]
Date/Time:       2015-02-17 15:40:53.566 -0800
OS Version:      Mac OS X 10.7.5 (11G63b)
Report Version: 9
Interval Since Last Report:          274199 sec
Crashes Since Last Report:           7
Per-App Interval Since Last Report: 1695 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      2DB104CB-F9EA-4B16-B256-C07389A005BC
Crashed Thread: 10
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
objc[1407]: garbage collection is OFF
*** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'efw_cache_update not found'
*** First throw call stack:
0   CoreFoundation                      0x00007fff8f5b2f56 __exceptionPreprocess + 198
1   libobjc.A.dylib                     0x00007fff93699d5e objc_exception_throw + 43
2   CoreFoundation                      0x00007fff8f5b2d8a +[NSException raise:format:arguments:] + 106
3   Foundation                          0x00007fff8ce9b71f -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 169
4   PackageKit                          0x00007fff891580be -[PKUpdateEFWCacheInstallOperation initWithRequest:sandbox:analyzer:] + 322
5   PackageKit                          0x00007fff891438cf -[PKInstallOperationController addStageOperationsIntoSandbox:inBackground:] + 280
6   PackageKit                          0x00007fff890fa2fc +[PKInstallClient estimatedTimeForInstallRequest:] + 76
7   Install                             0x0000000109bc8a40 -[IFPKInstallElement estimatedTotalTime] + 177
8   Install                             0x0000000109b6ace7 -[IFInstallQueue advanceToNextElement] + 166
9   Install                             0x0000000109b60eb5 -[IFSession(Jobs) _runMetaQueueEngine] + 1564
10 Foundation                          0x00007fff8ce2a72a -[NSThread main] + 68
11 Foundation                          0x00007fff8ce2a6a2 __NSThread__main__ + 1575
12 libsystem_c.dylib                   0x00007fff926e68bf _pthread_start + 335
13 libsystem_c.dylib                   0x00007fff926e9b75 thread_start + 13
terminate called throwing an exception
abort() called

Hi
There are few more places to check i think
1) go to RWB >> Cache Monitoring >> see both the notification table and cache status table. You find more clues to what is wrong.
2) Go to RWB >> SLD Registration (this is on PI7.11, not sure on previous versions) >> select Adapter engine >> there are several Cache notifications there. They should be all green
Kr
Robert

"Non-Central Adapter Engines" in RWB

Hi.
We install XI system and we changed host name according to notes 757692.
After then, We found one problem in RWB.
When we run Component Monitor in RWB, Adapter engine is in "Non-Central Adapter Engines".
Why Adapter engine is in "Non-Central Adapter Engines" node ?
Any ideas ?
Regards, Arnold.

Hello Sonali
This is most likely caused by errors registering the XI components in the SLD. Apply the notes below:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
Also search the forum for similar issues registering the adapter engine in the SLD components.
Regards
Mark

Non-central adapter engine entry is shown under development rwb

Hi All,
Recently we had a sand box which is a sytem copy of our development server, and everything works fine now.
I have observed a strange issue here is, in the developement rwb under the Non-Central Adapter engines I see a entry as "Adapter Engine T49 (sand box host name)" the SID seen here is a sand box SID, and till today we never installed any non-central adapter engine either on dev or sand box, I am suprised to see this entry, can some one
please help me to understand why is this sand box entry is shown under development rwb and where can I set this or where how can I delete this entry.
Thanking you in advance..
Regards
Sonali

Hello Sonali
This is most likely caused by errors registering the XI components in the SLD. Apply the notes below:
#764176 Error in XI due to inconsistent SLD contents
#1117249 Incomplete Registration of PI components in SLD
#1334053 No automatic PI 7.10 SLD Registration
Also search the forum for similar issues registering the adapter engine in the SLD components.
Regards
Mark

RWB / SLD Registration / MsgUrl is null?!?

Similar Messages

Maybe you are looking for