RWBE and changing Alternative Units of Measure
Hi
I'm trying to use RWBE to view the stock holding of multiple materials. I want to change the base unit from Ea's to TON's for all the materials in the list however it seems that I can only do this one at a time for each material in the list. If I change the list display to the "Tree Structure" I get an ABAP dump when attempting to convert all the items at the same time.
Can this be done using RWBE or is there an alternative report which can be used.
Thanks in advance
FYI- MMBE is not an option since I need to view materials u201Cen massu201D
Hi,
To Check the available unit of measures or to create below gfiven the Path
SPRO->General Settings->Check Uuits of Measurements
Please check whether Alternative Unit of measure is maintaind.
Regards
Reward Points if useful
Similar Messages
-
SPRO path for maintaining basic and alternative unit of measure.
HI ,
Please tell me path in SPRO where we maintain basic and alternative unit of measure. If it is not in SPRO ,please suggect where to create new or delete old unit of measure.
Waiting for your reply.
Thanks
RohitSetting up new units can be done in transaction CUNI
If you want change units in a certain material, then do it in MM02, click button alternative data, then goto the units tab -
Stock and Values in Alternative Unit of Measure
Dear Experts,
Can anybody suggest me any Standard Report for Stock and Value in Alternative Unit of Measure.
Regards,
vgl
Edited by: vglokam on Aug 16, 2010 8:56 AMHi,
you cannot take stock report with alternate UoM. Alternate UoM is for "ORDERING" purpose only and not for SKU.
Arul -
Creation of Inspection lot in Alternative Unit of measure
Dear Guru,
Our implementation is going on in a Tube manufacturing company where Base Unit is maintain in KG & 100 % visual inspection is taken place & we accept or reject tube on Pieces. So how can we do this in SAP, Because in SAP Inspection Lot is created on Base Unit & UD (Stock Movement) also in base unit, How can we in corporate Alternative Unit of measure.Hi,
1. give unit of conversion in MM basic data (Unit of measurement) say 1 kg = 10 pieces
2. add unit of issue as a Pieces in MM QM view
3. add in inspection paln Unit of measure as Pieces ( if possible )
Now during stock posting post the stock KG and now see in stock MMBE by changing the UOm as a pieces you will get the stock in pieces and you can now issue the material in pieces too.
Experts pl guide if i am wrong anywhere -
Changing Base Unit Of Measure (Material Master)
Hi
1. How to check this? (Any successful changes in material master only took place when there is no open document from SD, PP, MM & FI for that material. )
2. Base unit of measurement cannot be changed. The reason being material movement history is there in table - MSEG mainly which otherwise create inconsistency in reporting. -
Is this line applicable for current period or previous period in current year or previous period previous year???
3. There are no existing purchase requisitions, purchase orders, or scheduling agreements for the material. -
is this means open / pending purchase orders or the the PO's created in system with respect to material where the GR and IR is already done
4. You can change the base unit of measure if there is no stock of the material during current and previous period----
is this means the term " previous preiod" is previous period in the current finacial year or its applicable for the previous preiod in previous financial year
5. Post the stock in the previous period to the current period - -
how can we do this???
VijaySee this OSS note : especially the last sentence:
From OSS note 138767
Within the material master record maintenance, you want to change the base unit of measure (base unit). During the change, the system performs extensive checks in order to avoid inconsistencies in the applications which use the material master.
In particular, the following checks are performed:
The base unit must not be defined as an alternative unit of measure for the material
No International Article Number must be assigned to the base unit
No proportion/product units must be defined for the material
No configurable material must be assigned
The material must not be used as a configurable material
Stock must neither exist for the previous period nor for the current period
No physical inventory must be active
No reservations or dependent requirements must exist for which the deletion indicator is not set
No planned orders must exist
No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set
No WM transfer requirements, no WM quants or no WM posting change notices must exist
The material must not be a bill of material
The material must not be contained in a bill of material
The material must not be used as a production resource/tool
The material must not be used in task lists
No standard cost estimate must exist for the current or future period
No production orders must exist
No planned independent requirements must exist
No run schedule headers must exist
If the base unit has dimensions, no serial number profile must be assigned
No sales and distribution documents must exist which have status Not processed or Partially processed.
Solution
If necessary, all reasons mentioned above must be eliminated by archiving the objects listed
1) SAP checks this for you. A new button will appear in MM02 and after you click this button to check the error log, you will see which documents exist.
2) I have not seen that an existing movement will restrict the change of a BUoM.
3) No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set
it is not caring about GR done or IR done. it telling you that the deletion indicator has to be active. As a deletion indicator can be reset easily, you probably have to archive the documents
4) the previous period is the period before the current period.
today we have February, hence the previous period is January.
5) first make sure your current stock is higher than the stock of the previous period. if it is lower, then you have to create inventory in current period first e.g. with 202 movement with current date.
Then you issue the previous period stock with 201 movement and previous period date (make sure periods are open in OB52 and MMRV allows posting to previous period).
Finally you issue the left stock in the current period with 201 and current date.
Now previous period and current period stock is zero. After the change of the base unit you have to get the stock back into the system
Edited by: Jürgen L. on Feb 2, 2010 3:58 PM -
Adding Alternative Unit of measure as part of attributte of material
Hi gurus,
In our source system each material has alternative unit of measure which contain info on converting the base unit of measure (CAR) to MT and PAL.
I need to add this info as part of material attribute
e.g.
Material "A" 10CART = 1 PAL & 100CART = 1MT
This information captured in MM table "MARM" with material code as the
As part of 0MATERIAL_ATTR , i need to have additional field that capture the info as below
CARTPAL = 0.1 (1/10)
CARTMT = 0.01 (1/100)
Please help to advice on how to enhance the extractor to cater the above requirement.
Your help highly appreciated
Thank youhi,
According to me you can enhance the 0Material_attr to bring the required information from ECC.
But before enhancing anything ask func consultant or business below ques.
1) will these unit entry will get created in MARM for any material at the creation of material or it will get updated later on
2) will this unit value get change for any material during its entire life
If any of above que ans is yes then how wud u manage in transaction data if unit get changed.
For that u need to apply feedback concept in transaction dso.
Regards,
Ashish -
Issue in Alternative unit of measure (MARM) update using MM17
Hi,
I have tried to update alternative unit of measure (MARM) for some materials using MM17.
It is working for some unit of measures (Like FT).
But if I try to changes the unit of Measure value for PLB (Counter & Denominator) or DLB it is changing for UNC, if UNC unit of measure is not there for that material then the UNC is getting created.
But according to MM17 functionality I think PLB values should change.
Please check and let me, if you have any solution or any one faced the same issue.
Thanks
sham.Hi Sham,
Your problem could be caused by wrongly assigned ISO codes to the unit of measures involved. Most probably to these unit of measures the same ISO code is assigned. This leads then to problems in the ALE interface of the material master, which is used too by the mass maintenance transaction MM17.
There only the ISO-code is given and then the System doesn't know the correct unit of measure, which
should be used. So it is possible, that the change is done for a wrong unit of measure.
Please check for this your customizing in transaction CUNI.
Regards
Mauro -
GR IN ALTERNATIVE UNIT OF MEASURE
Dear Friends,
I want to know report for GR of production order in alternative unit of measure for a specific day.
Plz help me
Thanks
KKHi,
There is ni standard report in SAP for this.
As for the GR, this cannot be changed, you can disply stock in L or EA in many reports and transactions (MMBE and the physical inventory transactions can all be in either UOM for instance) but the main UOM for stock is the UOM defined on the issuing UOM on the plant / storage view of the material master. Or use MB51with movement type.
Or try report 'SAPMUNIT' from SE38
Regards,
R.Brahmankar -
Mass upload of Alternative unit of measure using MASS
Hi All,
Can some one guide me how to upload alternative unit of measure using MASS Transaction - can you elaborate like fields to be considered also, as I am trying using MM17 but could not go further.
Thanks,
Vengal Rao.it is possible to create alternative units using MM17. But I would not use the word upload in that matter, as you cannot upload from an external file.
start MM17-
select table MARM and execute
you see 2 tabs,
you are at the Change record tab, please set indicator for do not change existing data, then go to the creation tab
enter the material number and the alternative unit you want add .
then execute
Now you see your material number, the new unit and the material description
click the icon for field selection and add the field nominator and denominator (and all other fields where you usually enter data) to your shown fields.
enter the value of your choice and save.
if you want add the same value for nominator and denominator to all the materials listed, then enter the value in the fields that are listed above the listed materials. then click the header title above all fields that shall be distributed followed by the mass change button. Finally press save button. -
Dear Experts
How to delete valuation of material . Want to change Unit of measurement for particular material.system is displaying message while changing UOM.
Regards
RajFrom OSS note 138767
Within the material master record maintenance, you want to change the base unit of measure (base unit). During the change, the system performs extensive checks in order to avoid inconsistencies in the applications which use the material master.
In particular, the following checks are performed:
The base unit must not be defined as an alternative unit of measure for the material
No International Article Number must be assigned to the base unit
No proportion/product units must be defined for the material
No configurable material must be assigned
The material must not be used as a configurable material
Stock must neither exist for the previous period nor for the current period
No physical inventory must be active
No reservations or dependent requirements must exist for which the deletion indicator is not set
No planned orders must exist
No purchase requisitions, purchase orders or scheduling agreements must exist for which the deletion indicator is not set
No WM transfer requirements, no WM quants or no WM posting change notices must exist
The material must not be a bill of material
The material must not be contained in a bill of material
The material must not be used as a production resource/tool
The material must not be used in task lists
No standard cost estimate must exist for the current or future period
No production orders must exist
No planned independent requirements must exist
No run schedule headers must exist
If the base unit has dimensions, no serial number profile must be assigned
No sales and distribution documents must exist which have status Not processed or Partially processed.
Solution
If necessary, all reasons mentioned above must be eliminated by archiving the objects listed. -
Change for Unit of measure in condition master
Hi, gurus..
I want to know this is SAP error or not..
I created condition for material H20.
H20 70500 usd per 1 SET
and edited the unit of measure in addtion of material master record.
1 EA - 1EA
1 SET - 6 EA
then I create SO in VA01 with line item
H20 1EA ...
but condition record showed me a wrong value..
H20 11774 usd per 1EA...
70500 / 6 = 11750 usd..Why 11774...??
So, I changed the condition for more test..
H20 11750 usd per 1EA...
After input line item in VA01.
H20 1 Set...
then condition was 70500 usd per 1 SET ..Right result..
I tried it on other system ( Best Practices 1606) once more but result was same.
This is SAP ERROR ??? or not..
Plz..give me your ideas..Dear Kim,
this error will come due to conversion factor at sales order level .kindly check in the item level how the conversion factor will take the system and also try to change the Quantity and check once again. this will come rare case , if you want to check the conversion error ,debug at the sales order level . for your reference I am attachment the conversion factor path .
Regards, -
Changing Base Unit Of Measure in Material Master
Dear All,
We need to change the base unit of measure of certain materials who have been assigned inspection plan. We have deleted the material from Inspection Plan and later even the plan. But still the system not allowing to change the BASE UNIT OF MEASURE. The error thrown by the system is : Material is assigned to inspection Plan.
Please guide in this regard as changing the material for us will be a very cumbersome act.
RegardsHi Rohan,
Please check 'display errors' in MM02 when you are trying to change the BUoM. It will say what prevents you from doing that.
Please check:
http://www.sap-img.com/materials/change-base-unit-of-measure.htm
BR
Csaba -
No alternative unit of measure specified, during creation of sales order
Dear Experts,
when user is creating sales order, User is getting the error message no. MM108 "No alternative unit of measure specified" for particular material.
we have checked the alternative unit of measure it is already maintiained in the material master.
we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
can you provide the exact reason and solution to over come this please .
Thanks in advance.
Regards,
Suresh VeerepalliDear Experts,
The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
X AUn Measuremt unit text Y BUn Measuremt unit text
1 L l <=> 1 L l
1.121 KG kg <=> 1.000 L l
1 PCE Piece <=> 1 L l
1 BDL Bundle <=> 12 L l
1 PAL Pallet <=> 720 L l
Error is gettting when creation of Sales Order ,Order is standard order.
When we double click on error message the following details are shown.
1.No alternative unit of measure specified
message no:MM108
2.Diagnosis:
This alternative unit of measure is missing.
3.System response :
The system cannot carry out conversion
4.Prodedure:
This is due to Program error that should not occur.
Please provide the exact solution on this issuse.
Thanks -
Adding Alternative Unit of Measure to Outbound idoc
Hi gurus,
I need to add alternative unit of measure information to an outbound ORDERS idoc for each line item segment. How do I know what segments and qualifiers to use?
Thanks!
WillHi Will
Unit of measure at item level is in
Segment --> E1EDP01 : IDoc: Document Item General Data
Field --> MENEE : Unit of measure
Do you want to convert the Unit of measure in outbound idoc?
Use conversion rules for this...
or
do you want send Unit of measure and secondary unit of measure ??
extend the idoc type and write user exit to populate date in extended segment...
i hope above info helps you
Thanks
RAMESH -
No alternative unit of measure specified
Hi,
We are encountering no alternative unit of measure specified upon confirming the process order in COR6. What might be the problem. The base unit of measure is properly maintained in MM. Base unit of measure is Btl and the unit of issue is case.
Hope you could help us.
ThanksHi
In the confirmation screen, in the yeild unit field is there. open the field there and check whether you units are displayed there or not. If they are not defined there then open the table and update your units there
Krishna
Maybe you are looking for
-
SAP Business One 8.8 License Issue
Hi Everybody, I have upgraded the SBO 2007B to SBO8.8. its upgraded successfully with PL11. I have the license file of SBO8.8. when I import the license file in the system, its showing the Total Number of Professional User License 2 and Available zer
-
Dear All, Through transaction code called Migo we are creating the return delivery for a stock transport purchase order by giving the inputs as the material document we have flagged the item as okay and also checked the box which indicates via delive
-
Regarding sending response at a time to a WSDL in BPEL
Hi All, I have a requirement that is explained below: Note: Below paragraph is somewhat long but I am doing it for making u to understand my requirement I have two applications A and B. I am recieving the request schema from A and I am invoking respo
-
How can i set case structure always true on boolean impulse?
Hello everyone! I need a little help. All i want is to set a condition when to acquire data from my acquisition board. I have a sinusoidal pulse and when value its near zero (between 0.5 and -0.5) i want to start to write data and also stop condition
-
Strange behaviour in ORacle Forms Webutil 106 / Error message WUC-14 WUC-12
This is to inform you about a strange behaviour in Webutil V1.0.6 Hosting environment is Oracle Application Server 10.1.2.0.2 on Unix Solaris 10 Oracle Server 10.2.0.4.0 Enterprise Edition Client-envionment : Windows 2000, IE 6 I created an Forms bas