Rwbuilder not found after 9iAS R2 Installation !!!!!!

Hi,
I installed the 9iAS R2 ( infrastructure and 9iAS ) on Sun Solaris.
I would like to compile my report RDF with Report Builder.
I found the rwbuilder command in the 9iAS documentation. but on my system, it does not exists !!!!!
still i have to install some things other ?
thanks.

The point is not whether it is DS/Reports or AS/Reports. The Reports forum (there is only one) is monitored by Reports PMs. They may or may not be reading this general forum. If there is an expert who can answer a reports question, chances are good that s/he is reading the reports forum. Same goes for Forms, Discoverer, BI, Portal, J2EE etc. - the experts for each of these is more likely to be monitoring the respective forum rather than this one. This forum is useful for general discussions.
Hope this helps,
Ashesh Parekh
Oracle9iAS Product Management

Similar Messages

CS6 photoshop not found after downloading and putting in serial number

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
Thanks!

Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
Please please help me!

"CJS-30199 The CTC classes were not found after waiting for 900 seconds."

Here's the snippet of the sapinst_dev.log
I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
this stage.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
The CTC classes were not found after waiting for 900 seconds.
ERROR      2007-05-10 20:19:48
           CJSlibModule::writeError_impl()
CJS-30199 The CTC classes were not found after waiting for 900 seconds.
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
Your help is much appreciated.
Thanks and Regards,
Satish/

Hello Satish
Please do following checklist:
1. Check that the J2EE engine is up and running (e.g. log in with Admin)
2. Check that the following application is running:
     Visual Admin => Cluster => Server => Services => Deploy
     Select "Application" and look for "sap.com/tclmctcutilbasic_ear
3. Try to continue installation
It could be helpful to apply the patch for CTC as per note # 938261
before restarting.
and also try to add more memory allocation.
If issue persists,
- I'd like to know which installation DVD/CD number being using ?
- The contents of the LABEL.ASC file.
- The installation guide reference and title used for this install ?
- SAPINST version ?
- Oracle version/patch level ?
- Operating system version/patch level ?
See also:
Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
Thanks
Kenny

Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
Thanks!

check your duplicate post. there are two responses.

Error message of "404 - page not found" after downloading and installing Firefox 15

Error message of "404 page not found" after downloading the latest version of Firefox.

This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].

Network card not found after new installation [SOLVED]

I broke my filesystem on my Asus UL80V series laptop in trying to solve problems related to the latest glibc update, so decided to do a clean re-install. I had an installation disk at hand: 2009.08 with kernel 2.6.30.4-1 (which is supposed to have the module for my ath9k network device). However after a successful installation (including all the files from base-dev), my network device is not recognised:
dhcpcd: eth0: interface not found or invalid
although network connectivity (wired and wireless) worked perfectly before the installation attempt.
This happened yesterday (17th) and I have been scouring the web since trying to find out what the cause of this problem is, without luck.
I also burned a new installation CD with the latest stable version, but no luck there, either! Got a message at the beginning informing me that the install requires 64 Mb memory, although my laptop has 4 Gb.
I should say, the device is there and working:
lspci | grep Net
gives
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
I also did
modprobe ath9k
just to make sure. No luck.
Any help will be appreciated.
thanks
thea
Last edited by thea (2012-07-23 23:59:16)

Argh, ip may not be around in the 2009 image really ;-) .. Use "ifconfig" instead..
But: I meanwhile cross-checked your ath9k: http://wireless.kernel.org/en/users/Dri … h9k_driver
and it does not sound encouraging for the kernel you have there.
The image is far too old anyway, if you ask me (would be a darn hazzle to get that uptodate I am sure). Pity you get that memory error with the 2011 one. Maybe check forums on that. Sounds very strange, I am not aware of any post I read.
If you can burn another CD, you can try the recent ISOs as well: http://releng.archlinux.org/isos/
Beware that the ones from July dont have the AIF setup anymore.

HP officejet pro 8600 "not found" after installation on Dell laptop with Windows 7 op syst

downloaded software from internet and it shows that it's been installed on computer. Printer is on and shows that it is connected to the network. Networks match on computer and printer. Printer not printing from computer but did from my phone. "printer not found" message comes up during connection process on the instal wizard. I am using a Linksys wireless broadband router. I've tried all the troubleshooters and found that there was a driver error, but I don't know how to correct this.

Hey @mech3320 ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I understand that you are having some trouble with the driver download on your AMD chipset but not your Intel one.
I recommend that you try the web download of the drivers after you uninstall the ones that you tried form the CD.
Driver Download Page
Let me know if the web drivers work better for you or not.
I worked for HP.

DVD/CD unit not found after installation of Windows 8 PRO

After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
When searching for a new driver I'm told that I have the latest one. I read on Microsoft support that a similar problem occured on installing Vista, but the solution should not be applied on this installation.
What else is to do about this problem?

> After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
If you would use the Toshiba forums Advantage search option, then you would find this info:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
+If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator are installed on the HDD, there might be a issue between Win 8 and mentioned software+
+So uninstall these tools, then restart your PC using the Power-->Restart option in Windows 8. Your CD/DVD should be accessible now.+

Get "404 Not Found" after deployment. How to find out correct URL?

To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
Newman

Hi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman

Files not found after migration to new Mac

Hi,
On my old Mac, under Snow Leopard, my installation was complete and everything worked fine.
Then, when I bought a new Mac (with Mountain Lion installed) I had to use Migration Assistant to restore my Time Machine Backup, which included my Logic Pro installation.
Now when I try to use Logic Pro I often get these "Audio file ... not found!" messages (see example).
How can I fix this?
Many thanks!

Thanks for the link! Instead of un-installing and re-installing everything, I noticed that in GarageBand (which I normally don't use) there was an update/additional download available. After doing it I noticed that this had fixed nearly all missing-audio-file-problems in Logic Pro: when checking for missing instruments by creating a new instruments project everything was complete again on 2 of our 4 Macs (pre 2012 models) -- on the other 2 Macs (late 2012 models) only the following 3 ( ! ) files are missing:
/Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/...
.../Seventies Kit/DC Tit Hat 08.aif
      (of EXS24 Instrument "Seventies Kit.exs")
.../Liverpool Bass/IL Btl Bass bomb 08.aif
      (of EXS24 Instrument "Liverpool Bass.exs")
.../Steinway Grand Piano/Steinway Pedal V1/Stw ped v1 024.AIF
      (of EXS24 Instrument "Steinway Piano.exs")
So we copied the 3 missing files into the same directories on the 2 newer Macs, but it seems Logic doesn't "see" them and therefore still says that they are missing:
How can I help Logic to find these files?

(OEL 4.7) -bash: sqlplus: command not found after install of 10g R2

Hi all
I'm new to Linux and I would like your help and directions on a few things:
After 2 days of battle with RPM's (i386 vs x86_64) i was finally able to install 10g R2 on OEL 4.7 x86_64 system without any errors.
please check if all these settings are correct and help me how to start sqlplus? or create a database with dbca
I followed all the directions in Doc ID: 339510.1.
During installation i choose this path as the ORACLE_HOME
/u01/app/oracle/product/10.2.0/
I did not however installed the default database.
I then ran the two scripts at the end of the installation as root.
Here are my settings:
oracle bash_profile:
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
:q
ORACLE_BASE=/u01/app/oracle
export ORACLE_BASE
ORACLE_HOME=/product/10.2.0/db_1;
export ORACLE_HOME
export PATH=$ORACLE_HOME/bin:$PATH
here is my oracle env result
[oracle@nycoralp01 /]$ env | grep -i ORACLE
OLDPWD=/home/oracle/oraInventory
USER=oracle
ORACLE_BASE=/u01/app/oracle
MAIL=/var/spool/mail/oracle
PATH=/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin
HOME=/home/oracle
LOGNAME=oracle
ORACLE_HOME=/product/10.2.0/db_1
here is my echo $ORACLE_HOME result:
[oracle@nycoralp01 /]$ echo $ORACLE_HOME
/product/10.2.0/db_1
Can someone please tell me what did i miss or did not set?
When i try to run sqlplus i get this error
[oracle@nycoralp01 /]$ sqlplus
-bash: sqlplus: command not found
Any help appreciated

I change it in my bash_profile
$ vi ~oracle/.bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
:q
ORACLE_BASE=/u01/app/oracle
export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1;
export ORACLE_HOME
export PATH=$ORACLE_HOME/bin:$PATH
and i'm still getting the same error
-bash: sqlplus: command not found
Is there anything else i'm missing? do i have to restart anything?

"Hard Disk - (3F0) BootDevice not found" after removing Windows

Hi.
I own a ProBook 4530s that came with preinstalled Windows 7 Home Premium. I'm a long-time Linux user, so the first step I took after buying it was shrinking the OS partition and installing Arch Linux on the newly created free space. I have used the notebook in this setup for something like a year now, but since I rarely even boot to Windows, I decided to gain some free space by deleting them entirely. Using cfdisk, I deleted their partitions.
After a short time (about a day), I had the machine powered down, and I found some old labelless CD I wanted to inspect. I started the computed and inserted it into the drive. It was apparent it was a Windows XP installation CD, so I turned the computer off (before it finished the phase of loading drivers).
(It's likely that the previous paragraph is unrelated to the error message, because the installation shouldn't even touch the disk at that phase. I also don't reboot often, so I'm not sure whether did the computer boot between deleting the partition and booting the Windows XP CD.)
The next time I tried to boot the PC, I was greeted with "Hard Disk - (3F0) BootDevice not found". All HP diagnostics were OK, and when I instructed the GRUB on an Ubuntu live CD to boot into my hard drive, it booted normally.
I admit the BIOS might be somehow confused by the partition table I have, as it begins with a lot of free space and has no NTFS partitions, but I believe BIOSes shouldn't be dependent on the OS I run. So, I have a few questions:
Does the HP BIOS try to detect Windows, and does it do anything differently if it doesn't find Windows on the hard drive? I googled around, and didn't find anyone with experiences running just Linux on my notebook (just dual-booting...).
If it does, is there some way I could convince it to boot into the hard drive even through it doesn't have Windows on it?
Thanks.
This question was solved.
View Solution.

I see the same error but my situation still allows me to boot up but only with the secondary HDD in the DVD writer bay. For more details, please see an existing thread on http://h30434.www3.hp.com/t5/Notebook-Hardware/Hard-Disk-3F0/m-p/1670523#M76013.
I am suspecting that it has something to do with BIOS not reading the MBR or something.
Have you sorted your issue on this yet?
Cheers

[SOLVED] "ip: command not found" after power failure

Hello,
After a power failure my Arch box has no network connection available. An 'ip addr' command showed me the outrageous error message :
bash: ip: command not found
How could this ever happen ? How do I recover from such an error ?
Last edited by singleton (2014-12-19 17:34:58)

I wasn't doing any system maintenance when the power failed, just some regular browsing.
Here's the output of each command :
pacman -Qk
https://bpaste.net/show/e06fb962c42c
echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
ls -l /usr/bin/ip
ls: cannot access /usr/bin/ip: No such file or directory
pacman -Qi iproute2
error: package 'iproute2' was not found
I 'm suspecting I will need to use a fresh installation CD to get over this. Any guidance will be greatly appreciated though!

Receiving command not found after modifying .bash_profile in OEL 5.6 64 bits

Hi guys,
After the installation of Oracle Database 11gR2 on OEL 5.6, I added the following entries into the .bash_profile of the oracle user:
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_HOSTNAME=ol5-112.localdomain; export ORACLE_HOSTNAME
ORACLE_UNQNAME=DB11G; export ORACLE_UNQNAME
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1; export ORACLE_HOME
ORACLE_SID=DB11G; export ORACLE_SID
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
# I added my own values relative to my environment.
But now, when I tried to login as the oracle user on my terminal, I received the following error:
command not found
command not found
So I deleted all the entries I added to the .bash_profile file. But it didn't solve the problem. When I log in as oracle, I still receive the error:
command not found
command not found
This is really weird. How can I do to solve this error?
Thanks in advance
Clamarion.

The following command might show you where the problem is:
bash -l -x
See "man bash" for details.

Lircd: command not found after install of lirc

Hi!
I've had some problems with lirc and had to uninstall it from my system. I also deleted
the files named lirc* after I uninstalled. I then cleaned the pacman cache and reinstalled
lirc.
I did this in a hope of getting a complete reinstall of lirc. The installation went fine, but my
system doesn't seem to see that lirc has been reinstalled. When I do #lircd (which used to
start lircd) I get #bash: lircd: command not found
I've tried to reinstall several more times by #pacman -S lirc and it runs through the installation.
I still get #bash: lircd: command not found though.
What am I doing wrong? Why won't lirc go back to working like it should do after reinstallation??

azleifel wrote:
The lircd daemon expects to be run at startup and needs root permissions because it will create device nodes in /dev. Try "man lircd" for more information.
To run lircd at startup, add it to the DAEMONS line in /etc/rc.conf. If needed, add any necessary kernel module to the MODULES line of /etc/rc.conf while you're there. As an example, I have MODULES=(lirc-mceusb2) for my trusty Microsoft MCE remote control and DAEMONS=(@lircd).
That did it!! Thanks.
I spent hours and hours yesterday trying to figure out how to autostart lircd. Now everything works.
When I try #irw every button I push is mapped with the right name and function. But in Freevo things are not that smooth. It seems
freevo only understands a few of the buttons.
I've seen that in myth there's a config file (or something) that seems to map out the remote functions in relation to myth itself. Do I
need a similar config file for freevo?
EDIT: nwm... I found out that yes, I do.
Last edited by Perre (2008-04-13 10:59:09)

Rwbuilder not found after 9iAS R2 Installation !!!!!!

Similar Messages

Maybe you are looking for