RWD uPerform 4.10 client & Windows 7 compatibility

Hi
Is RWD uPerform 4.10 client supported on Windows 7 32 bits?
I didn't have install issues on Windows 7

Hello
It can work, but it's not supported by the version "technical papers". If you want to be sure, its better to migrate to latest version like 4.3 or 4.4
Greeting
Gustavo

Similar Messages

Error Intall RWD Uperform 4.3 on Windows 2008 with Oracle 11G

Hi,
I need install RWD Uperform 4.3 on Windows 2008 with Oracle 11G.
When tried install Uperform 4.3 occurs the next error:
Product: RWD uPerform Server -- This Release requires Oracle 11.2 R2 ODP Client to be Installed.
If you are not using Oracle, please use the regular 4.30.0 release.
If you are using Oracle, please install ODP.NET and then re-run the Setup. Setup will be aborted now.
I installed the ODP.NET whit the version 11.2.0.2.
But the errors still occur.
Thanks.
Marco Kolombesky

In the end I solved my problem.
But I installed RWD uperform 4.4 (not 4.3).
But I think that the problem was that when I installed uperform 4.3 I didn't run this command at DB level on my SQL Server datadabe:
ALTER DATABASE AdventureWorks2008R2
SET READ_COMMITTED_SNAPSHOT ON;
GO
Regards
Matteo Stocco

SPP 4.30 windows could not start the rwd uperform monitoring service

Hi, i just install spp 4.30 with two servers, one for the sql databases, and the other for the search server and vignette.
Windows server 2008. 64 bits
All the installation was ok, but when you try to configure the server it doesn't show the web page.
The rwd uperform monitoring service can not start and send the following error:
Windows could not start the rwd uperform monitoring service error 1067.
Any ideas.
thanks
Edited by: Idel Gorodezky on Jun 26, 2011 3:14 AM

Hi, thanks for the Help, i am sending the logs.
- <Log>
- <Entry Type="Error" Id="f19c1f86-8e6e-4bee-8c18-312e7edb23d2">
<Date>6/27/2011 1:23:09 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="2a9ca666-2f94-4cb0-86e9-62254c21e2ec">
<Date>6/27/2011 5:39:02 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="7c26d18a-fadf-49f1-8f0f-881ea4d33fa0">
<Date>6/27/2011 10:59:44 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="0bd8fe26-8265-4b2e-a192-0b6513eb5ad8">
<Date>6/27/2011 12:01:15 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="b8b0694b-5214-4871-9bc6-b8af11dadf6f">
<Date>6/27/2011 1:06:19 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="370efaa4-1f71-413c-a027-126b31693932">
<Date>6/27/2011 4:17:07 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
</Log>
<configuration>
<appSettings>
    <add key="DataSource" value="fifcrsppdb01" />
    <add key="Database" value="uperformGlossarydef" />
    <add key="DatabaseEngine" value="SQLserver" />
    <add key="DatabasePort" value="1433" />
    <add key="DatabaseSchema" value="glossaryPublic10" />
    <add key="ConnectionModifier" value=";pooling=false" />
    <add key="DatabasePassword" value="Zn4Od3shJCfR6hrx0ALMNg==" />
    <add key="DatabaseUser" value="glossaryPublic10" />
    <add key="Flags" value="0" />
    <add key="SMTPServer" value="172.16.3.114" />
    <add key="SMTPDomain" value="16.3.114" />
    <add key="HostName" value="FIFCRSPPAP01.ccr.co.cr" />
    <add key="HostPort" value="80" />
    <add key="HostProtocol" value="http" />
    <add key="GlossaryEnabled" value="True" />
    <add key="GlossaryUseRTF" value="True" />
    <add key="GlossaryDefaultLanguage" value="en-US" />
    <add key="VignetteIntegrated" value="True" />
    <add key="InstallLocation" value="C:\Vignette\Collaboration\" />
    <add key="ErrorLog" value="WWW\uPerformWS\logs\ServerErrors.xml" />
    <add key="DataFolder" value="WWW\RWD\Data\" />
    <add key="LibraryStructure" value="en-US_rwdDocLib.xml" />
    <add key="WorkingLocation" value="WWW\uPerformWS\WorkingFolder\" />
    <add key="ErrorMaxSize" value="1000000" />
    <add key="ErrorHistory" value="30" />
    <add key="GlossaryQueue" value=".\private$\GlossaryQueue" />
    <add key="PublishingQueue" value=".\private$\PublishingQueue" />
    <add key="ImportExportQueue" value=".\private$\ImportExportQueue" />
    <add key="ErrorQueue" value=".\private$\ErrorQueue" />
    <add key="UserManagementQueue" value=".\private$\UserManagementQueue" />
    <add key="Transforms" value="WWW\uPerformWS\ms\PublishingData\Base Static\xml\transforms" />
    <add key="CurrentVersion" value="4.30" />
    <add key="TrustAllCertificates" value="True" />
    <add key="WebRequestTimeout" value="600000" />
    <add key="LdapAuthentication" value="ServerBind" />
    <add key="WordtoHTML" value="True" />
    <add key="WordtoPDF" value="True" />
    <add key="PPTtoPDF" value="True" />
    <add key="ExceltoPDF" value="True" />
    <add key="WordtoSource" value="True" />
    <add key="PPTtoSource" value="True" />
    <add key="ExceltoSource" value="True" />
    <add key="PublishedContent" value="WWW\ucontent\" />
    <add key="PublisherConfig" value="WWW\uPerformWS\ms\PublishingData\configuration files\transformation.settings" />
    <add key="Templates" value="WWW\uPerformWS\ms\PublishingData\Base AppData\templates\" />
    <add key="BaseStatic" value="WWW\uPerformWS\ms\PublishingData\Base Static\" />
    <add key="BaseAppData" value="WWW\uPerformWS\ms\PublishingData\Base AppData\" />
    <add key="PensListenerPath" value="WWW\uPerformWS\" />
    <add key="Upgrade" value="WWW\uPerformWS\ms\PublishingData\Upgrade\" />
    <add key="EnableDocSIM" value="True" />
    <add key="EnableDocXHTML" value="True" />
    <add key="EnableDocPDF" value="True" />
    <add key="EnableDocWORD" value="True" />
    <add key="EnableDocPPT" value="True" />
    <add key="EnableCourseSIM" value="True" />
    <add key="EnableCoursePDF" value="True" />
    <add key="EnableCourseWORD" value="True" />
    <add key="EnablePPTXsource" value="True" />
    <add key="EnablePPTXpdf" value="True" />
    <add key="EnableXLSXsource" value="True" />
    <add key="EnableXLSXpdf" value="True" />
    <add key="EnableDOCXsource" value="True" />
    <add key="EnableDOCXhtml" value="True" />
    <add key="EnableDOCXpdf" value="True" />
    <add key="SystemPassword" value="" />
    <add key="IntegrationEnabled" value="False" />
    <add key="IntegrationUserName" value="" />
    <add key="IntegrationPassword" value="" />
    <add key="IntegrationURL" value="" />
    <add key="IntegrationOutgoingPolicy" value="" />
    <add key="IntegrationIncomingPolicy" value="" />
    <add key="PolicyFile" value="WWW\uPerformWS\wse3policyCache.config" />
    <add key="WebRequestQueryString" value="SMSESSION=NO" />
    <add key="SiteMinderCookie" value="SMCHALLENGE" />
    <add key="SiteMinderDomain" value="" />
    <add key="TivoliCookieName" value="" />
    <add key="TivoliCookieDomain" value="" />
    <add key="TivoliWebSEALJunction" value="" />
    <add key="TivoliWebSEALBaseURL" value="" />
    <add key="AuthenticationType" value="Basic" />
    <add key="LDAPTimeout" value="10" />
    <add key="UserPageSize" value="2000" />
</appSettings>
</configuration>

Upgrade from Info Pak 5.7 to RWD uPerform 4.3

Hi,
They have entrusted me to analyze the feasibility of to update our installation Info Pak 5.7 to RWD uPerform 4.3, nevertheless I do not find major information it brings over of the tool " uPerform Migration Wizard ". Might they indicate me where I find technical specifications relative to Info Pak's migration to uPerform?.
Thank you,

The Migration Wizard can be installed during installation of the uPerform client software.
You must have an administrator installation of Info Pak 5.51 or higher on
your computer in order to install the Migration Wizard.
For detailed information on installing the client, refer to "Getting Started: Creating Content" in the
companion manual Creating Content with RWD uPerform.

Disconnecting WEB SSL VPN client windows 7 to remote windows 7 virtual machine

Good morning,
          my problem, common to other colleagues who use Windows machines 7 Professional is this:
I connect to WEB SSL VPN Cisco from Client Windows 7 Home Premium Explorer-9 to a virtual machine Windows 7 Professional using a specific professional audience and vpn user. I access the Terminal Services window (attached JPG) with a list of links to virtual machines.I connect to the virtual machine in Remote Desktop Full Screen mode and log in with the same user and password. For the connection is installed an add-type control ActiveX CISCO Portforwarder Control version 3.1.0.1, file name -> cscopf.ocx.
Problem: The session window once inside the virtual machine disappears and disconnect from the virtual machine back in the window of choice of Terminal services available. This always happens and there is no way to maintain a stable connection.With modality not FULL SCREEN, the session window would seem to remain stable but however is impossible to work in a small window.
This problem is raised after the update windows 7 to SP1 both Home premium and Professional. In fact before the update the connection is stable. The update to SP1 update the RDP client microsoft to version 6.1.7601.17154 from version 6.1.7600 but i do not know if this the cause of the problem.
Have you an update of CISCO active-x to fix the problem? I cancelled the file and download the last version but the problem remains.
Workaround: Use local virtual machine with xp or windos 2003 and access form this operating system but I consider absurd to use a local
                    virtual machine to access a service which should be directed
Note: This problem does not occur if the VPN session to the virtual machine Windows 7 is launched from a host machine running Vista Home Premium with RDP Client 6.0. My previous PC had this OS and I was working in an absolutely stable by performing the same type of connection.
Host Operating System: OS Name Microsoft Windows 7 Home Premium Version 6.1.7601 Service Pack 1 Build 7601
OS virtual machine accessed via ssl web vpn: OS Name Microsoft Windows 7 Professional Version 6.1.7601 Service Pack 1 Build 7601
Can you help?Thank you.
Carmelo Orlando
No

The same problem here as well.
I am using a Win7 PC to connect to an Win Vista PC via SSLVPN. Once i logged into the remote PC, the session is disconnected.
Do we have any corrections from Cisco for the moment?

How can I make the LabVIEW CGI write to the same client window twice?

I'm building a CGI VI using LabVIEW 6i and the Internet Dev. Toolkit. I would like this VI to write to the same client browser window twice. The first reply will just be a confirmation that the form has been submitted, and the second reply will be the results from a measurement. Is there any way this can be done? I have tried to use the "CGI Write Reply.vi" twice in the same CGI VI, but only the first reply is received in the client window.

Very nice interface! It sounds like you might want two separate steps and two separate CGIs (or one CGI with a "step" flag). Here's one idea:
1. Pass the configuration info from the form, initiate the measurement, and return a confirmation page to the user. Embed something in the result page (a hiddden variable on a second form, perhaps?) that will identify the measurement that was requested upon a subsequent CGI call.
2. Either have the second form/CGI automatically submit itself after time T, or else allow the user to submit it. Use the hidden variable to identify which results set is being requested. If the measurement is finished, return the results; otherwise, return another confirmation page with a new time estimate.
Best of luck,
Jo
hn

Patches did not update to client Windows 7

Hi
We have 2 domain controllers installed on Windows server 2003 STD. Also Group policy management installed with the these servers. We have installed WSUS server on the another server that installed Windows server 2008 STD. When WSUS server shows thelist
of updates, I have deployed the updates to the clients(Windows 7 Professional). When I checked the clients, it seems that it could not find the patches update that I have deployed. So, I go back to check GPO that I created to deployed update to clients(Computer
Configuration-->Administrative Templates-->Windows Update). I double click one item to see the detail, I saw it's said that supported on: Windows Server 2003,XP SP1, 2000 SP3. I thought that 's why I could not deploy the update patches to Windows 7.
Then I have installed Group Policy Management on the same server 2008 that I have installed WSUS server. Then I have create new GPO, linked, enforced it. But it's still not work. I cannot deploy the update patches to client. Kindly request any suggestions
for this help to deploy the update.

Hi Lawrence,
The problem is I deployed the update via WSUS 3.0 to install patch on those Windows 7 clients. But it seems that it those clients could get the update from WSUS server. From WSUS server, it saw the clients machine. I checked Group Policy that running on
Windows server 2003 domain controller((Computer Configuration-->Administrative
Templates-->Windows Update). Then I opened one item here. Suppose I open item "Configure Automatic Update". It has the message in the bottom of this message here said that "Supported on: Windows Server 2003, XP SP1, 2000 SP3".
So I was thinking is it possible that the updates could not deploy to those clients because the group policy still running on Domain Controller Windows server 2003?
When I built the new server that running Windows server 2008 STD and add the component Group Policy Management on that server. It will has the same policy from domain controller Windows server 2003. But when
I looked in the settings in Windows Update. Suppose I opened the item "Configure Automatic Update". It said that "Supported on: At least Windows 2000 Service Pack 3 or Windows XP". Then I not sure is it need to be upgrade Domain Controller
from Windows server 2003 to Windows Server 2008? When I checked the Resultant Set of policy from the client, it get the policy from Group policy domain controller, but I check Group policy on the clients. It didn't shows the policy that I set on the domain
controller. Kindly you advise me how to let the policy deploy to clients running Windows 7.
Thank you very much.

I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium

Error - Application will run with a wrong client window ID!

Anyone here knows how to resolve this error:
An error occurred while starting the iView.
Application /webdynpro/dispatcher/ ... ... ... will run with a wrong client window ID!
Do not continue; please report this problem to your administrator.
The user encountered this pop-up message after she upgraded her browser to IE8. However, she's the only one having this error. Others who have switched to IE8 didn't encounter this error.
SAP Note 1171930 -- is not applicable to us.
Your prompt response is appreciated.

I guess you need not use the library. The note says its a problem with library.
It applies to you if you use custom framework page other than standard framework page.
SAP can give you better response on why only one user gets it. In my scenario, we are able to consistently reproduce this.
And I guess most of the bugs will have similar statements attached 'it occurs only for one user'.

Moderator: A FAQ for Windows Compatibility forum?

Would it be possible to do a FAQ section in the Windows Compatibility forum <http://discussions.apple.com/forum.jspa?forumID=687>? Many of the same topics are being asked repeatedly and I feel a FAQ could address most of the similar topics.
I suggest the following as topics for the FAQs:
1. Microsoft Office questions. These are not relevant to Mac and Windows compatibility and are more appropriately posted in Microsoft's discussion forums.
2. Boot Camp questions should be directed to the Boot Camp forum and Parallels questions should be directed to <http://fourms.parallels.com>.
3. The need for antivirus software for Windows when it is running on a Mac.
4. A list of links detailing how to print from a Mac to a Windows-connected printer and vice versa.
bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

Thanks for your replies Ardian and Hardy! I'm glad to see at least the idea is supported by a few others. Maybe it will catch on.
What I find interesting is that the Windows Compatibility forum has become the dumping ground for all the "Windows" questions that don't seem to fit in the forums listed before it. You'll notice on the Forum Home page that it's at the end of the Windows Compatible Technology list. I'm sure folks are ruling out the more specific technologies such as iPod, iTunes, QuickTime, etc., and posting there when they don't know where else to post.
Windows Compatible Technology
AirPort & AirPort Express for Windows
Bonjour for Windows
Boot Camp Public Beta
iPod
iTunes for Windows
QuickTime for Windows
Windows Compatibility
Even a general FAQ link below or to the right of the the section title would be a helpful guide for folks.
I'm frustrated that more than 50% of my questions seem to be telling first time posters why their questions aren't approrpriate for the forum and which forums they should be using.
bill

Adding existing RWD uPerform documents using SAP Solution Manager Adapter?

Note# 1468552
Cannot add existing RWD uPerform documents using the SAP Solution Manager Adapter.
Currently, a user can only create a new document with the Solution Manager Adapter; there is no
ability to add existing uPerform documents that have already been created.
RWD has submitted an enhancement to SAP requesting this functionality.
Hi All,
Has there has been any update on the functionality to add existing RWD uPerform documents to Solution Manager? I have found a note from 2010 stating that this functionality has been submitted as a enhancement. My question is, has this feature been implemented yet? If not, does anyone have any suggested work-arounds for this issue?
Thanks in advance!
Stephanie

Hi Stephanie,
I can't find much information on this topic.
You could create a message in component SV-SMG-SPA.
Regards,
Matthew

Pop up error encountered after upgrade--wrong client window id--POP UP

Hi All,
We have upgraded the system to EP7 SP15.on the upgraded system on certain actions i am getting a error pop up showing the following error message
An error occured while starting the iview
Application will run with a wrong client window ID!
Do not continue please report this problem to your administrator
Also
we refered to R3 Note 1171930 which says its an SAP bug and for NWDS SP15 EPPSERVSP patch#2 should be applied.
After applying the patch also i still encounter the POP -UPs.
Please help

If the user is using link from favourites of browser, Ask him to delete it and manually enter the url and Try.
In my case, The user just deleted the saved link from Favorites and tried entering the url manually,
though it is weird it worked.
or else try these Notes 1450543, 1171930 .

RWD uPerform - attaching Cue cards or pdf to an eLearning course

I am responsible for providinng eLearning for a SAP implementation, using the RWD Uperform tool also known as SAP Productivity Pak.
We have created Simulations with autoplayback, cue cards and quick reference guide. We have then created a course and have had the autopalyback attached to the course (as simulation).
I need to know is there anyway to attach the Cue card or pdf to a RWD uPerform course?
Penelope Thomson

Hello Penelop,
As my understanding goes, there are no options presently available in the RWD Uperform Tool which helps in attaching the cue
card/ PDF file to course. I am not able to understand your point when you say "*We have then created a course and have had
the autopalyback attached to the course (as simulation)*"
See when you publish the simulation in form HTM file, they can be viewed in standard format or autoplayback format. But there
is no provision to link it to course as there as separately distributed among the end user for reference. kindly correct me if i am
wrong on this.
Regards,
Sarthak

Trip form - Warning PageBuilder will run with wrong client window ID"

Dear All,
I am getting following warning message before opening Trop form.
"error starting iView webdynpro PageBuilder will run with wrong client window ID"
If we click on OK button, the pdf form ets opened correctly.
How to remove this warning ?
Thanks,
Vinod

We ran into the exact problem when opening a PCR form from the "Status Overview" iView in MSS.
The solution is here: [Note 1171930 - Application will run with a wrong client window ID alert|https://service.sap.com/sap/support/notes/1171930]
This applies if you have one of the following versions and an iView is launched in a new window:
- NW04s SP15
- EhP1
Best regards,
Jill

Client windows 2000 xp sur serveur linux

comment connecter un client window xp ou 2000 oracle 9i sur un
serveur linux mandrake 8.1 j'ai installer le client 9i pour
windows sur la machine cliente mais il me manque des norion pour
utiliser net assistant et je n'arrive pas non plus vec ODBC

The PCNETLINK Windows NT/4 compatible file/print/authentication server
Can be used as an AD/W2K member server . This is the old Lan Manager for Unix
server from the beginning of the 1990-ties that SUN upgraded to NT4 compatablity.
http://www.sun.com/solutions/interoperability/netlink/download-20.html
There is also a bunch of patches for it on sunsolve.
Otherwise you can also use SAMBA which is included on the
solaris9 software companion CD.

RWD uPerform 4.10 client & Windows 7 compatibility

Similar Messages

Maybe you are looking for