RWD with BW BPS

Hi
I would like to know if any body is using RWD (used to record each click on SAP) tool to record the Business Process & Procedures for the Budget or Planning. We are trying to use this tool with the BW BPS web excel interface and experiencing lot of issues and the main problem is that the RWD is increasing the response time of web interface tremendously.
Please let me know if any body has experience with this kind of recording tools being used with BW/BW BPS.
Thanks,
Raj.
Message was edited by: Raj G

Hello Raj,
Check out the version of RWD you are using !!! If your are using the RWD U-perform one then do the upgrade of your RAM to 2 GB.
Regards,
SARTHAK

Similar Messages

For the cm with multiple bps, what are the options for workaround?

For the cm with multiple bps, what are the options for workaround?
customer a purchases 1000
and returns 800 at POS
customer b was used at SAP related to this transaction, purchase amounting to 2000,what can we do to apply the returns of customer a to customer b of 800 return transaction at pos?customer a and customer b code pertains to just one client---but were given different codes at POS and at SAP

Hi,
If one customer has two codes, you can only do manual journal entry to adjust their accounts.
Thanks,
Gordon

Using the ROLLUPTIME with a BPS Cube

Hi, all.
I built a multiprovider with a BPS Cube (transactional) plus a "normal" Cube (not transactional). Then a put a query over this cube in a web template.
When I use a text element ROLLUPTIME for display the last update of data, only the "normal" Cube is considered.
I don't know if this is a limitation of the BW or if there are some trick to do this work correctly.
We're on BW 3.5.
Any advices will be welcome.
Thanks,
Henrique Teodoro

This question is duplicated

Analysis Authorization with SEM-BPS

Hi,
We have performed technical upgrade from BW 3.5 to BI 7.0. We want to migrate to BI 7.0 functionality phase wise.
We have SEM-BPS and now we want to migrate to Analysis Authorization of BI 7.0.
Once we have igrated to Analysis Authorization, will there be any impact on SEM-BPS? Can we still use SEM-BPS with New Analysis Authorizations? We do not want to move to BI-IP in near future?.
Please advise.
Best Regards,
UR

Dear UR,
Iu2019m going to try helping you,
In difference of reporting functionality, in planning, the data of an InfoCube is not just read; it is also changed or created.
There are two planning tools in BI: BW-BPS (Business Planning and Simulation), and BI Integrated Planning.
There are two main tcode: BPS0 and RSPLAN
There are three authorization objects to manage Integrated Planning:
S_RS_PL_ADMIN - Planning Administrator
S_RS_PL_PLANNER u2013 Planner
S_RS_PL_PLANMOD_D u2013 Planning Modeler (Development System)
The main object in the planning scenario is InfoCube real-time, where can available writing in small package that arrive in parallel. In some cases the security requirements for reporting and planning can be merging. In this case you need authorization object for checking planning, as authorization object above, and you need authorization object for using a query for planning requires as S_RS_COMP.
In addition to authorization for displaying data, the authorizations for changing data you need analysis authorization (the analysis authorization focus in the InfoProvider, no in Aggregation Level).
In your analysis authorization design for reporting stuff, you should use in 0TCAACTVT characteristic 03 value. In the planning stuff, you should use in 0TCAACTVT characteristic 03 and 02 values. As explain following:
Using the characteristics 0TCAACTVT (activity), you can restrict the authorization to different activities. Read (03) is set as the default activity; you must also assign the activity Change (02) for integrated planning.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b1/0c9441b8972e7be10000000a1550b0/frameset.htm
I hope this suggestion can help you answer question,
Luis

Crazy with the bps

I am trying to optimize my time and the quality of my DVD movies but still I am not sure which is the best way to convert from a DVD to mp4 in terms of number of bps.
I am using a conversion software set at 1700 bps as standard number of bps with 640x480. Am I doing ok?
Which is the best way to procedure if I am converting DVDs? What about dvi or xvid, should I put also the same number of bps?
I have also realized that if the movie is longer than 2h 30 min, I cannot put more than 1500bps but maybe this is a problem of my software.
It would be great to know your experience watching movies at different bps (for example at 1500, 1700, 2000, 2500 bps or around). Because if the differences are not so big, I could save a lot of space reducing the bps...
Jokin

Discussing how to rip DVD's is not permitted in these forums, but in regard to bitrates in general for movies you may get some sort of benchmark from the fact that the movies available for purchase on itunes are encoded at around 1,500 kbps but exactly what encoding practices are used are not really known.
In practice I can produce fairly good movies at 1,500 kbps if I'm prepared to use the multipass function and non standard settings of something like mpegstream clip, but generally for SD movies with software that uses no better than two pass encoding with few non standard options I generally use 2,500 kbps.

One User ID with 2 BPs and 2 CPs

Hi,
1) I have created an User ID U1 using users_gen. So system created CP1 and BP1 . I could logon.
2) Deleted the user assignment and position
3) Again created an user ID U1 using users_gen. So system created CP2 and BP2. I could logon.
Now I want to link the user ID U1 to CP1 and BP1.
Is it possible ?
Please help
Thanks
Pranav

Hi. What version of SRM are you using?
If you have SRM 4 or below, then you can go to PPOMA_BBP and find the position of the user, then right click and select assign.
It will then let you assign a BP of your choice to the position.
Then you can right click the BP and select assign again, and assign the user of your choice.
From what I can see in SRM 5 this has changed, as the relationship to BP is not visible in PPOMA_BBP any more.
You can try and do it in SRM 5 and assign the CP, it might bring all the links through, but I am not sure.
Regards,
Dave.

Usage of OWC-Webinterface with firefox deletes BPS-data

Dear Experts,
We know that excel OWC in bps-webinterfaces do not work with firefox.
But as we cannot control the local settings at a user workstation it
sometimes happens that a user opens a webinterface with firefox
instead of MS IE.
In this case with firefox he/she does not see any excel sheet. This
behavior is as expected.
But - if he/she then pushes the save-button this will delete the data in BPS-backend
(transactional cube).
We know that firefox is not supported with BW-BPS. But as the use can
not be disabled from server-side this is a big problem.
Has anybody an idea for a good workaround?
I can think of some java script-coding only but this is what we want to avoid.
Best redards
Gregor

Dear all,
for your information.
This problem has been solved for us meanwhile with the help of the supporter of a customer message.
It seems that only webinterfaces of "old style" (before 3.5) showed this behavior. After we had switched them to "new style" the error did not occur anymore.
Gregor

Segmentation of BPs with attributes or attribute sets

Hi,
we use SAP CRM 2007 and I want to learn a bit about CRM Marketing, especially Segmentation.
Do you know if it is possible to create a target group with all BPs, who have an attribute of an attribute set (so it doesn't matter what the values of the attributes are)??
It doesn't work with "value of attribute is *"!
Thank you!
Chris

Hi Vladimir,
Thank you for your answer. but unfortunately it doesn't answer my question.
I will try to give an example:
we have about 100,000 BPs (for example). and we have a marketing attribute set "Newsletter".
In this marketing attribute set there are the marketing attributes "Topic 1", "Topic 2", "Topic 3"....
with the possible values "Yes" or "No".
10,000 BPs have one or more marketing attributes of the attribute set "Newsletter", 3,000 of them have the attribute "Topic 1"
(-> 2,000 "Yes" , 1,000 "No")
I know that is easy to create a target group with all BPs "Topic 1 = Yes",
but how can I create
1) a target group with all BPs that have the attribute "Topic 1" (so it should be 3,000 BPs) -> and I don't want to create a target group with "Yes" and one with "No" and put them together, because its possible that for some attributes more than 2 values are valid!
2) a target group with all BPs that have one or more atrributes from the attribute set "Newsletter" (so it should be 10,000 BPs)
I hope this example helps to understand my problem.
Thanks for your answers.
Christopher

Problem with BPS Reports after upgarding the system to BI.7

Dear Experts,
We are facing problem with the BPS Reports after upgarding the system to BI.7
In 3.5system the reports are dispalyingthe data.
we have copied the production system to X system and has migrated the same to BI.7.
in the X system the reports are not showing the data and even we generated the web interfaces in X system.
After giving the input to BPS Layout and when we go for output ,we are getting the message No Data has been found.
when we chekced the corresponding cube data was existing.
It would be a great help if any valuable suggestions to over come the problem.
Regards,
Sunil...

Dear Andrey,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code has not been maintained for the sales documnet 1296".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

BIA with BPS

Hi All,
I need information as to how BIA behaves with the BPS application. I am aware BPS and real time cubes can be used with BIA but what the best approach to tackle open and closed requests. Can they be recognized and handled by BIA automatically or do i need to create separate virtual and basic cubes ? How are the planning layouts etc are going to react when used with BIA ? If you have any real experiences , standard documentation for BIA and BPS, links etc please do share it with me .
Thanks
Ankush

Hi,
go through....
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0f60d7f-bdbc-2a10-7a85-82f949212760]
go through this weblog..
[/people/ryan.leask/blog/2007/09/03/what-is-cpm-and-what-is-happening-with-sem-and-bi-integrated-planning]
[https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=biawithBPS&adv=false&sortby=cm_rnd_rankvalue]
Planning Layout with BIA
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00915d56-1e31-2a10-6785-e8b5c4114de3]
hope these help U...

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

How to check if BIA has effect on a BPS function

Dear Experts,
As I know BIA can also improve DB read time (data selection) when performing a BPS function. Currently we are using a BIA test installation to see if it will help us. We have some BPS function with long data selection times.
I know created BIA indexes on all involved real time cubes. By just executing the concerned BPS functions I can see no effect. I now want to check if the BPS functions do access the BIA at all. For queries this is quite easy to check with RSRT.
So my question is:
Is there any tool available to check wether BIA is used by a BPS function or not? Some kind of RSRT for BPS.
Thanks & Regards,
Ulrich Meier

Hi Jens,
Thanks. I tried this. Strange result is that I get no data in that trace when running a BPS function. I do get data when running that trace during execution of a query which runs on the same InfoCubes as the planning function.
In the meantime I found table RSDDSTATBIAUSE which gets updated each time a InfoProvider is accessed if it has a BIA Index. Here my InfoProviders get a +1 in field BIA_USED when accessing them with the BPS function.
Furthermore I came across OSS-Note 990000 and installed the latest version of report ZBPPOBPS70 (I already knew that from BW 3.5). Here I found that field 'BW:Used Aggregate' is not populated, although within the coding of ZBPPOBPS70 there is indication that it should either show the used aggregate or BIA Index. The data is read from table RSDDSTATDM field AGGREGATE. There I found entries in AGGREGATE for 'normal' query calls but none for BPS calls.
With alll that in mind I'm more and more confused...
Regards,
Ulrich

BPS retraction part for Cost center accounting

hi All
Can any body help me regarding the retraction part for cost center accounting bw-bps, how the retraction is exactly done . when part is where the data
comes sits in bw and R/3 .
how exactly plan data sits in r/3 what is the relation
while extrating the data into the bw, what is procedure for extracting in to the transactional cubes
prs

This post could give you some info:
CCA Retraction with BW BPS
Hope it helps.
Regards

BW BPS support issues

Hi all,
Am very new to BW BPS. Please give me some issues which we generally face in support project when we work in BW BPS project.
and also provide me step by step method, how to start working with BW BPS. I have searched in forums but those are not clear. Plz tell me clearly step by step.
Thanks,
Jack

Hello Jack,
there's a lot of information available. If you are serious about it, my #1 recommendation would be to get proper training. You can do it online (http://service.sap.com/rkt -> SAP NetWeaver 7.0 Learning Maps for Consultants) or in class room (http://www.sap.com/asia/services/education/index.epx -> Courses TBW45 or BW370).
Or get a book like http://www.sap-press.com/products/Business-Planning-with-SAP-SEM.html
Regards,
Marc
SAP NetWeaver RIG

BPS Upgrade

As our BW is going to BI7, we are also planning to do the technical upgrade of BPS , I did search this on the forum but didn't see any. Does anyone have any thoughts, steps, pre and post upgrade activities for this ? It would be greatly appreciated. Pls send those at pulchowk47atgmaildotcom
thank you.

Hi Tom,
Thanks for your reply, I know about BI-IP is a new tool, but this time we are not ready to use this tool, we might try few application after the upgarde but at this time we have SEM 4.0 add-on sitting on BW box 3.0B. As the BW box is going to be upgraded into BI7, we have to upgrade our add-on to SEM 6.0 which goes with BI7. OR build all functionalities in BI7 directly with BW-BPS as BI7 already has BPS and BI both. But If I want upgrade our current functionalities I think I need to upgrade into SEM 6.0 Add-on into BI7 Box.
Can anyone give me some thoughts on this and docs if you have any?
Edited by: Hans Kraft on Dec 8, 2008 11:31 AM

RWD with BW BPS

Similar Messages

Maybe you are looking for