RWL to DNG in Lightroom Win7 not working

Hello, I just got my MBP yesterday and I am trying out aperture and I have to say that I´m loving it, however I am having a small problem, though the .DNG converted in lightroom from my Nikon D200 and the .RWLs from my Leica D-Lux 5 are showing perfectly the .DNGs converted in lightroom from my .RWLs are not working, I have Aperture 3.1.1 and CameraRAW 3.5.0
I tried using the Adobe DNG Converter with all possible settings with no luck at all.
Any ideas?
Thank you very much!

philberndt wrote:
Yes, i have already decided to skip the DNG step.. BUT.. the 400 or so files that i have are only on DNG, now im converting to tiff and i will forget about it, in the future i will just keep them as RWL...
Aha. So it is a matter of "saving" the files you already have? If you created the DNG with the option to embed the original, you should be able to retrieve the original with DNG converter.
If you did not, I think conversion to tiff is the best option. You may want to keep the DNG as well, however, at least for critical photos. The DNG will contain much more image data than your converted tiff files. In many cases, that will not matter at all, as the tiff anyhow contains all the info that is needed. However, with overexposed or underexposed photos, or photos where the white balance is off, the DNG may contain data you may actually need.

Similar Messages

DNG 5.4 does not work well with Olympus E-620

I just installed the DNG converter 5.4 to use with the RAW ORF files from my new Olympus E-620. The converted images are not the same as the jpg images or the RAW images as converted by the Olympus Master software. They are duller in the highlights and darker in the shadows. The difference is NOT small and is readily noticeable in the image and when comparing the histogram. It looks like part of the problem may be that the Olympus automatic gradation may not be interpreted properly, but the difference is even more than just this. I can turn this on and off in the Olympus Master and the difference is similar but a greater difference than just this alone. Further, the Olympus Master software cannot open the DNG files.
I would also like to rgister my high dissatisfaction with the short life of the Adobe software due to the new RAW converters not working with older Photoshop or Lightroom software versions. I am using Lightroom 1.2 and PS CS3, and I do not want to spen the considerable cost of upgrade only to be able to convert my RAW files. Also, I do not like to have to convert my RAW files to DNG first, because I loose some of the editing options that I can only do in the Olympus software, and it creates another step in my workflow.

shedridc wrote:
The converted images are not the same as the jpg images or the RAW images as converted by the Olympus Master software.
Well, doh...since Camera Raw is using it's own processing parameters and algorithms, the odds of ACR "matching" the camera makers software is not real high. At some point when ACR 5.4 is finally released Adobe may have some additional DNG Profiles for the camera that may make color a closer match but the tone curve will prolly always needs tweaks. It would behoove you to either create presets that you can apply in Bridge or alter your ACR "Defaults".
shedridc wrote:
I would also like to rgister my high dissatisfaction with the short life of the Adobe software due to the new RAW converters not working with older Photoshop or Lightroom software versions.
It's been Adobe's policy to only support currently shipping products. As such, customers who upgraded to Ps CS4 can expect about 18 months of free support and Camera Raw updates. Fact is that while you WERE a current customer when you bought CS3 and you got 6 free ACR updates (ACR 4.6 was the last version for CS3), you are no longer a current customer.
You may not like the DNG Converter step, but that's what you have if you wish to use your new camera with your old software...your other alternative is, of course to simply use the software that came with your camera.

The adjustment brush in Lightroom does not work

The lightroom brush does not work. The radial filter and graduated filters work. How can I correct this?

What isn't working? Explain a little bit about the problem. Also, what OS, what version of Lightroom, a few details to help us understand your situation really helps. If the problem is that you can't see the tool when it's activated, try pressing the H key which is the toggle switch to hide/show the tool. Another thing to look at is the the flow adjustment on the tool. Without more information, I could guess and guess and guess. But I would just be wasting my time and yours.

Lightroom does not work after the download

I bought and downloaded Lightroom 5 and it does not work. It does not allow me to do anything. It looks like it is not activated. I have downloaded it 2 times and still have the same problem.

You need to provide system information and explain what exacxtly isn't working.
Mylenium

Creative console launcher Titanium HD Win7, not working

I just purchased the Titanium HD to upgrade from the Xtreme Audio. I have spend the whole day, and I literally mean the whole day on trying to solve;
"There are no supported audio device available. You need to close the application. Click OK to close the application now."
When trying to run the Creative console launcher. I have spend countless hours doing the installation all over again and again by different methods. I've tried with the CD in the package, I've tried the latest drivers and software from your website, I've tried to re-insert the sound card several times, I've tried to sweep the drivers with Sweep Driver 3.0 and removed all registry entries, folders and files with my Revo Uninstaller Pro, with no god **bleep** luck.
At no point in time has the driver not been working. It should be all fine - sshot provided;
http://www.myupload.dk/showfile/967847ebbe.jpg/
Sound also works. However, I do get error when installing the driver - sshot provided;
http://www.myupload.dk/showfile/967850f6ff7.jpg/
I Googled it and most seem to claim that application is not important and can be disabled. I have Googled the issue so many times, and found many people with the same issue, but who seem to get it working some way or another at the very end..... Just not me...
Though the card works I cannot access the cards features without it's software, and the card is therefore, basically uselsss. Had I known I'd run into this I would have picked the Asus Xonar Essence by miles! Although I did ask creative for help in an e-mail I'm afriad this is going to have to end up with a dispute between me and the retailer :/

Your first problem is this:
You upgraded from one card to the other. Uninstaller or not, you have a ton of remnants left over from that old card.
Try this for your no supported device:
no supported device fix
Reboot, and try again. If this does not work, then install this driver....newest for your card.
after rebooting, try again.
If that does not work, then you can manually unzip that driver you downloaded above to a temp folder (that driver is a self extracting executable).
Then you can go to device manager and choose to update driver and browse the temp folder you made above and update your driver and reboot.
See if any of these help you.

Adobe Photoshop Lightroom 3 updates won't work? Also tried DNG converter but will not work either.

Does anyone know how to get the Adobe Photoshop Lightroom 3 to update so you can use it? I can't process raw files with my new Canon SD Mark 3.
It looks like they stopped doing updates.
Next I tried the DNG converter but it was useless. It could not find any of my photos.
SOS - I needed to complete a job with this last night and their site won't help and they finally respond by saying we will get back to you in a few days.

That camera requires at least Lightroom 4.1. There is no update for Lightroom 3 that will support the files from that camera. I'm guessing that you're having the typical problem that new users at the DNG converter encounter. The converter prompts for the *FOLDER*. If you open that folder then the DNG converter will tell you there are no files to convert. Just choose the folder. I know, it's really stupid prompt and method. But it is what it is.

Develop module in Lightroom CC not working

I've just installed Lightroom CC& used it to create a panorama and a HDR, both of which were successful. I then tried to edit them in the Develop module but was rewarded with a blue screen where the image should be; I then found that this happened to all the images I tried to edit.
I then imported the panorama and HDR to Lightroom 5.7, and tried to edit them - successfully. So it works in Lightroom 5.7, but not in CC - does anybody know what's happening?

Hi there,
this solution worked for me with LTCC - win8/64bit
once turned off the graphics card acceleration in Preferences->performance
closd application
opened back application > solved!
thank you

T400: Bluetooth in Win7 not working

Hello people
I've installed Windows 7 Professional on my T400.
Drivers for Bluetooth is installed.
I've checked with the DPInst.exe program in the brcmWin7 folder ind the Bluetooth Drivers default extract-folder - the tool says that 2 drivers are succefully installed:
- Broadcom HIDClass (06/11/2009 6.2.0.9500)
- Broadcom Bluetooth (06/15/2009 6.2.0.9000)
However, i don't know how to turn on Bluetooth !!
The FN+F5 program is not installed - what program is that anyway ??
how do i Turn-ON the Bluetooth adapter in Win7 ??
thanks.
Solved!
Go to Solution.

okay... i solved it...
I installed some of the programs in the Extract folder. Running the default Setup program didn't work, because the installer couldn't find a Bluetooth device..
after installing the 2 programs, i also installed the Lenovo Hotkey program
after restarting, i was able to use FN+F5 to enable the Bluetooth device !
wuhuu

GPU acceleration in Lightroom 6 not working

Hi,
Any ideas how do I turn on GPU acceleration in Lightroom 6?
I meet the minimum requirements (Win 7 x64, 1GB VRAM, OpenGL 6.1 ) and as advised in "learn more" I did check my graphic driver which is at the latest version.
Still I am getting message: "GPU acceleration was disabled due to errors"
Any help apprecited
thank you
System info:
Lightroom version: 6.0.1 [ 1018573 ]
License: Perpetual
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 4
Processor speed: 3,0 GHz
Built-in memory: 12245,9 MB
Real memory available to Lightroom: 12245,9 MB
Real memory used by Lightroom: 633,5 MB (5,1%)
Virtual memory used by Lightroom: 620,2 MB
Memory cache size: 0,0 MB
Maximum thread count used by Camera Raw: 4
Camera Raw SIMD optimization: SSE2,AVX
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1200
Input types: Multitouch: No, Integrated touch: No, Integrated pen: No, External touch: No, External pen: No, Keyboard: No
Graphics Processor Info:
Check OpenGL support: Failed
Vendor: ATI Technologies Inc.
Version: 3.3.13283 Core Profile Context 14.501.1003.0
Renderer: AMD Radeon HD 6670
LanguageVersion: 4.40

You can also install an "old" version from april 2014 (V 14.4) which works with Lr6 after having un-installed your actual actual drivers.
You can find it here: http://support.amd.com/en-us/download/desktop/previous?os=Windows%207%20-%2064
Be aware that with this driver you could activate the GPU Acceleration but it's possible that you didn't obtain any benefit...bug or not nobody knows...
Try

Help! I tried to import my Elements 8.0 catalog into my trial of Lightroom 4, not working!

Please someone help me! I downloaded a trial of Lightroom 4 and went to import my Elements 8.0 catalog. It says that it did do it, but with errors...and now when I open Lightroom, all my pictures just show up as grey squares. If I try to import pictures individually, it says that Lightroom already has all my pictures in the Library. Does anyone know a solution? Thank you!

That's a mysterious one! What type of files are the ones with the grey thumbnails? They're not PNG files or something like that?
If they're definitely a supported file type (JPEG, PSD, TIFF, camera raw file), then try something for me. Go to File menu > New Catalog and create a quick test catalog somewhere. Then just try importing one of the photos previously in your Elements catalog - set it to Add at Existing Location so it doesn't mess up your main catalog. That will confirm that the photos are ok.
If that works, find your upgraded catalog on the hard drive, close LR and rename the Previews.lrdata file to something else temporarily. Then reopen LR and see if you can now see the thumbnails.

Lightroom 3 not working since Time Machine back up- how to reinstall ?

Hi, in a previous forum i wrote about my Lightroom 3 that stopped working the day after starting Time Machine on my iMac. It was a new formatted external hard drive, replacing an old one for my Time Machine. I have never had any previous problems, and didn't know they can't run together.
A person replied that I have to uninstall my Lightroom 3 and reinstall. How do i stop this happening again ? I am very computer illiterate, so could someone point me in the right direction, with instructions how to uninstall on an iMac and reinstall. Will i loose all my keywords etc from the catalogue. I worked as a portrait photographer, so its important to still have that information for me. What should i do in regard to insuring i have everything I need backed up to an external hard drive, before I uninstall Lightroom 3. I'm scared to do uninstall until i know i have everything I should backed up.
Thanks , in anticipation of a reply

I tried that, it won't let me copy the backups to a new drive. At this point I am not concerned about continuing to back up, I can start a new TM backup if need be, I am more concerned about getting the old back up to a disk which I can then access once I exchange the Time Capsule.
Thanks for the advice though.

Keywords in Adobe Bridge CC and Lightroom 5 not working

I recently upgraded to Adobe CC. We use Bridge and Lightroom regularly to tether while shooting, batch process and search for images. I have noticed that files I have keyworded in Bridge will randomly lose the keywords attributed with them. When we shoot tethered to lightroom we will keyword as we shoot but those keywords do not show up in Bridge. This is a huge issue for us. We have thousands of images and plan on using bridge as a tool for our designers and marketing team to search seamlessly for photos based on keywords. If they are randomly disappearing or not carrying through from Lightroom to Bridge it becomes completely unmanageable and completely out of our hands. And a completely useless tool. Any suggestions?

Keyword list in Adobe system, bridge and lightroom, need standardizing. That's what I feel.

Manually Sort in Lightroom 3 not working

I am using lightroom 3 on a mac. I am in a catalog folder (not a collection) and my "user order" is greyed out under the sort options. I can not drag and drop to reorder images. I am trying to create a slide show and customize the sort order.
What am I doing wrong?
thanks!
John

Thanks, That was it. Not obvious and kind of annoying. I created a collection with the images and am able to sort there.
Thanks!

Adjustment Brushes Lightroom 5 Not working

i have been using Lightroom 5 for months but suddenly my adjustment brushes aren't working at all.
ive tried quitting and relaunching and restarting the computer. i have done the recent update and am wondering if it is since then. i use a Mac. any advice on what to try??

hi,
there is actually no error message or anything to show you. i can still brush the tool over etc...it just doesn't apply anything ie; skin softening or iris enhance. It even still gives me the pin spot for where ive used it. I can move all the sliders etc...just no changes to the image

Lightroom mobile not working while I have creative cloud

How can my lightroom mobile trail be expired when I have adobe creative cloud? When I click join it takes me to Creative Cloud Photography plan | Adobe Creative Cloud which gives me the option of buying a plan, when I already have one.
Is this a feature?

Does your Cloud subscription properly show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

RWL to DNG in Lightroom Win7 not working

Similar Messages

Maybe you are looking for