RX100 ARW files not visible in preview in Bridge CS6

When looking at Canon RAW files (.CR2) I can see the previews fine in Preview. Not the same for RX100 arw files. I can see the thumbnails , However preview window shows an icon with "exec" in it. Also, adjustments made in Camera Raw do not show in the thumbnails as with other my Canon 5D II raw files. Help???
Message was edited by: Sparros

Thanks for the response.
I updated to the latest version and was able to view the thumbnails in Bridge - someting I was not able to do until the update - the preview window still shows the green and grey "exec" icon or a white icon with arw under it. I was hoping there is a simple fix in preferences or something like that.....I am stuck!
Does anyone else have the same issue?

Similar Messages

I have NEF files that won't preview in Bridge CS6

I shot two D3s last night and downloaded both cards. One the NEF files preview like normal and the other has NEF files that won't preview but open in Photoshop just fine. Anyone know why they won't preview?

You could try purging the Bridge Cache it may be messed up. Edit>Preference>Cache>Purge Cache

Camera Raw not working with Photoshop and Bridge CS6

Hi guys,
Had a hard-drive meltdown the other week and lost everything. I have re-downloaded and installed most of my important software, including the CS6 suite. I used to use camera raw alot with my .CR2 files and it worked fine for ages, now though, it doesn't work at all.
I have run an update and everything is up to date now, i've purged the cache and it's still not working, no preview on bridge or anything.
I have also tried going through the Camera raw updates on the Adobe website. I have tried deleting the plug in and redownloading it altogether too, no help.
Furthermore, when i try to open a .CR2 file through bridge into photoshop i get a message window:
My Camera Raw Version:
My photoshop version:
No preview of files in Bridge:
Any help would be greatly appreciated!
Chris

Hi Benjamin,
Yes I have tried that, my OS doesnt run it. I'm on:
Chris

Can't open files in Camera Raw while in Bridge CS6

05/30/2014
Believe this issue/problem happened after automatic update from Adobe (but can't be sure).
Have always uploaded files from camera into Bridge then do some editing by opening JPEG and RAW (NEF) files in Camera Raw from Bridge.
Now, "Open in Camera Raw" is greyed out and I am unable to find a way to open files with Camera Raw from inside Bridge CS6. This seemed to happen suddenly and without any new software or applications being added to computer. All other apps/software working well.
Have tried various fixes found on Adobe community discussions without success. Problem now ongoing for over a week +.
Am able to open files in Photoshop with no problem but want to be able to do some quick edits using Camera Raw opening files from Bridge CS6.
I'm using Bridge CS6 Version 5.0.2.4. (as part of Adobe Creative Suite 6). Updater states I have most current version of Bridge installed.
I'm using an iMac computer with Intel Core i7 processor
OS X 10.8.5
Have found others with this same or very similar problems on forums but either can't understand patches/directions or unable to complete instructions on my computer.
for example see: Camera RAW update issue with Bridge CS6
From that link/discussion, one finds this "solution":
After you update to Camera Raw 8.4, Bridge CS6 in Mac OS doesn't display image metadata or allow you to edit images in Camera Raw.
To the top
Manually install the Camera Raw 8.4 plug-in.
Exit Adobe Bridge.
Download the file below.
Locate and double-click the downloaded file to decompress it. The resulting file is Camera Raw.plugin.
Navigate to the Macintosh HD folder.
Open the Library/Application Support/Adobe/Plug-Ins/CS6/File Formats folder.
IMPORTANT: Navigate to the root Library folder on your hard disk, not the Library folder under your user folder.
Copy the Camera Raw.plugin from step 3 into the File Formats folder.
IMPORTANT: This new file overwrites the file already in this folder. It's important that only one Camera Raw.plugin file is in this folder.
Open Adobe Bridge.
Camera Raw.plugin.zip
Mac OS Camera Raw 8.4 plug-in for manual installation
However, when I try the above, I have these issues:
1. When I double click on the downloaded file, my computer opens PhotoShop and an error message is displayed that states "Could not complete your request because Photoshop does not recognize this type of file." (I suspect this may mean my computer has automatically decompressed the file, but I am not certain of that).
2. Not completely certain I know how to "Navigate to the Macintosh HD folder" as suggested in step 4. above (OK, I'm new to Mac; long-time PC user….)
3. When I am in "Finder" and click on "GO" while holding down "Option" key, I find "Library". within that, I can find "Library/Application Support/Adobe" but there is no "Plug-Ins" folder within the "Adobe" subfolder.
4. Not sure how to tell if I am in the "root Library" on my hard disk vs. "Library under my user folder". (Again, new to Mac….)
I have NOT yet tried doing an "Uninstall" and then Re-installing the whole Adobe Creative Suite 6 and would like to avoid that if possible.
Would absolutely LOVE it if Adobe would simply push an update that would fix this problem or if someone would explain to me how I could restore the earlier version that worked perfectly for me.
Any help, suggestions (in very basic, simple terms that any idiot new to the world of Macintosh can understand) would be appreciated. Very frustrated with Adobe at the moment.
Mostly have liked the switch to Mac, but with this and my photo workflow coming to a screeching halt, having second thoughts. (But I suppose Adobe update for PC may cause problems as well.)
Thanks in advance for any help/suggestions.

05/30/2014
Literally minutes after I posted the above, I figured this out myself and now I'm a happy camper and things are back to normal!
Here was my error/issue: as a new Mac user, I was not negotiating/finding files on my hard drive correctly.
In case there are others out there with this same issue (and as dense as I apparently am ):
Here is what I did that resulted in a fix:
First Steps:
1. Quit/close Bridge
2. As noted in post above, go to this link to download Camera Raw Plugin file:
Camera RAW update issue with Bridge CS6
Link to get to download is near end of instructions, but I will attempt to insert that link to download here:
Camera Raw.plugin.zip
3. Once file has been downloaded, find it by using "Finder" Click on "Finder" and look on list of options on left side of Finder window to find "Downloads". On my computer, when clicking on "Finder" these options appear in the list at the left:
All My Files
Airdrop
Applications
Desktop
Documents
Downloads
Movies
Music
Pictures
4. Download you just did should be at or near the top of your downloads list and should be named as "Camera Raw.plugin" and will be 83.5 MB in size
5. I right-clicked (two fingers on touchpad) to bring up drop down options and selected "Copy 'Camera Raw.plugin'" from that list to copy file.
Now, you have copied the plug in that will fix this issue. The second set of steps below will walk you through how to replace the file that is on your hard drive with this plug in file that you have copied.
Second set of steps (and this is where, as a new Mac user, I was confused initially)
1. Again, click on "Finder" on your Mac
2. On top of screen, find "GO" and click on that. (You should see "Finder" in the upper right corner of your screen, then "File, Edit, View, GO, Window, Help" Click on the GO
3. In drop down menu that appears, click on "Computer"
4. Then, double click on "Macintosh HD" to open your hard drive
5. Next, double click on "Library" folder to open that.
6. Next, click on "Application Support" folder to open that.
7. Then, double click on "Adobe" folder to open that.
8. Then, double click on "Plug Ins" folder to open that
9. Now, double click on "CS6" to open that folder.
10. Finally, double click on the "File Formats" folder that appears.
11. NOW, you should see this:
12. Right click (two finger press if using a touch pad) to open window with options. Select "Paste Item" by clicking on that option.
13. You will be prompted with an option to keep existing file OR replace the file. Choose "Replace" to past the new "Camera Raw.plugin" file to this folder.
Finally, if you now go back and open Bridge CS6, you should be good to go.
Hope that helps someone out there.
Hopefully future updates will from Adobe will be better.

FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
I'm running CS6 Production Premium with ALL updates installed on 10.6.8
I appreciate any input and help provided the input is provided by someone who either
A) knows the answer because they actually work for adobe
B) actually tried this themselves before attempting to provide a solution
If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

We are all just incompetent users here. As pointed out before this is just a user to user forum, Adobe rarely checks in.
I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

DNG files not showing thumbnails preview icon on mac, after reduce/resize pixel count. Mavericks 10.9.2, Photoshop CC, ACR 8.4.0.199. Any Solution?

This is driving me crazy. With today's huge file sizes it seem to me that for the majority of pictures a pixel count of 12-16 mega pixels y more than ok size for editing and make printings; for the professional jobs is a good idea to have the biggest file we can. Due to that i was trying to convert some NEF files to DNG, saving some space in the process, But the impossibility to preview the picture's thumbnails and the file size (it displays 0x0) immediately take me to 1984, (Windows 3.11). and those are bad memories.
I don't know if this is an apple's or adobe's error, but it needs to be solved.
Anyone with the same predicament?

Thanks for your insight JimHess. Someone else on another post pointed out how Photoshop changes the color profile and other things and then trying to make this file into a DNG again confuses Mavericks (and, presumably, other flavors of OS X). Admittedly, the process I described is unorthodox and not what may want to do. Thank you.
A.J.: First, I am offended by your suggestion to omit my comment. I was simply trying to provide help in finding a cause of a general problem people are having across the internet. That problem, as you pointed out, is that modifying a DNG in some way in photoshop results in the thumbnail no longer being visible. Your modification is the size. Mine was not. But it was a general modification in photoshop and an attempt to reconstitute the file as a DNG that seems to be common theme, whether this workflow makes sense or not. Additionally, I'm very new to digital photography and tried to be helpful. I would advise you (as an educator who knows the consequences of negative first-time experiences) to be more mindful that not everyone on here is as experienced as you and everyone can benefit from being clearer in their questions and their comments.
Second, as JimHess pointed out, in manipulating a DNG file in any of the programs in a way that alters the actual file (not changing some setting that is ultimately stored in a side-car file or does not actually alter the photo) is probably the root of the problem. Changing the file size by altering pixel count may first require one of your adobe products to physically alter the file information in a way that stops Mavericks from being able to recognize the contents as RAW information. Does this make sense?
Best regards,
Robert

Why are shared files not visible when iPhone4S connected to iTunes?

What makes this problem mysterious is that I have exactly the same settings on the same or eqivalent Apps on iPad2 and iTunes4S but when my iPhone is connected to my iTunes (running on my PC under Win7) it shows no files on Apps like Pages, iBooks, Keynote, and Print-n-share. Each of these Apps has files and each shows files when I connect my iPad2. I cannot export or import filesto/from itunes and iphone because the list of files inside the Apps is not visible in itunes.
PS I CAN, btw, export and import files by using the amazing App and service "DropBox" which is the only route in and out of my iPhone (I am not ready to use iCloud).

This is not a reply but an addition. While searching for answers as to why "Shared" files in original Apps in my iPhone4S did not appear on itunes I came across a similar discussion on another Forum in which Jim described in some detail how to get the two devices (my iPhone 4S and my iPad2) to recognize similar embedded files in similar Apps. https://discussions.apple.com/message/16690584#16690584
I went through this promising procedure but it did not help. Since the two devices are independent (I think -- they are on the same accoubt but ar different devices) I should be able to make them work the same way with regard to what is seem in iTune.

Airport Extreme files not visible on USB drive.

Airport Extreme files on Toshiba USB powered drive not visible through Windows. I disabled antivirus with no change. If I copy files onto it they go but then disappear. If I copy again it asks if I wish to overwrite the file as its already on the drive I just can't see them there. I tried another computer, also Windows 7, on our network with the same results. It is formatted as Fat32 and is recognized by the Airport. It is a 1TB size drive.

double post.

ADOBE FILES NOT OPENING IN PREVIEW

I have some adobe files that are not opening in preview but will open in adobe reader (11.0.06) which is the latest adobe reader for MAC. When try to open with Preview, it says
Please wait....
If this message is not eventuyally replaced by the poper contents of the document, your PDF viewer many not be able to diplay this type of document.
You can upgrade to the latest version of Adobe Reader which I have already.

Nevermind, I've answered my own question again. So I can look back in case I have this problem again:
highlight a pdf file
go to file, then get info
select open with then change to Adobe Reader

Raw files not displayed in preview

In Elements 10, are raw files STILL not displayed in preview in Windows 7?

Thanks for your reply, Ken, but when I do the Get photos-From Files and folders thing Elements did the same thing it does for jpeg files but then I still can't see the raws. HOWEVER, this morning after reading your message I went back to Elements to get that message that Elements gave me after trying to get the raw files, so that I could quote it to you, and there were all the raw files that I had gotten and tried to view yesterday. So dawn breaks on Marblehead and I realize that maybe Elements has to be refreshed in order to see the raw files. Thanks Ken!
John Holstein Mobile phone: 82-10-4727-0264
Chongno-gu Myeongryun 1-gil 13, Apt. 401
Seoul 110-811
South Korea

First tab of Lable Based Menu is not visible in Preview Mode

HI Genious,
I have added one Lable Based Menu in my application. If i apply the dynamic visibility to it, in preview mode 1st tab is not visible all other tabs are visible.
Ex. In Lable Based Menu, I have three label :- Distribution Center, Zoo, Bird Park. I have applied dynamic visibility to this component. In preview mode, I am not able to visible the first label (i.e. Distribution Center) while all other labes are working properly.
While i remove the dynamic visibility, All the labes are visible. But my application is not like that so i could not adapt that solution.
Regards,
Rishit

Hi Rishit,
Please let me know if you have applied Fix pacK3 for Xcelsius.
I have seen this issue in FP2, which got fixed in FP3. The workaround you can try is including a blank cell.
Thanks,
Amit.

Import Sony RAW .arw files not automatic

I decided to take the plunge yesterday I downloaded the trial LR2 (now 2.1) and purchased Kelby's Lightroom 2 book. All my catalog from PSE6 imported without a hitch. That's over 12000 photos with about half of them Minolta (.mrw) and Sony RAW (.arw) files. Then I decided to import the shots I had just taken from a weekend photoshoot. I plugged in my CF into the card reader and started LR. When I clicked on the IMPORT button for my CF location all I got was the message "NO PHOTOS WERE FOUND TO IMPORT". I can import the files using the manual CHOOSE FILE option but I want it to work just like PSE with auto import. From what I understand that should be the case. After a Google search I found importing Sony RAW images (.arw) was an issue in LR1, but shouldn't Aobe have fixed it by now?? Just as an aside, if I'm having this issue with .arw files, when I import the RAW images from my Minolta 7Hi I wonder if I'll have the same issue.
Since its a trail version I'm not eligible for Adobe support, so there is no help coming from there.

This is a known bug! Import the files trough "Import Photos from disk", thats easy en works fine for me! <[email protected]> schreef in bericht news:[email protected].. >I decided to take the plunge yesterday I downloaded the trial LR2 (now 2.1) >and purchased Kelby's Lightroom 2 book. All my catalog from PSE6 imported >without a hitch. That's over 12000 photos with about half of them Minolta >(.mrw) and Sony RAW (.arw) files. Then I decided to import the shots I had >just taken from a weekend photoshoot. I plugged in my CF into the card >reader and started LR. When I clicked on the IMPORT button for my CF >location all I got was the message "NO PHOTOS WERE FOUND TO IMPORT". I can >import the files using the manual CHOOSE FILE option but I want it to work >just like PSE with auto import. From what I understand that should be the >case. After a Google search I found importing Sony RAW images (.arw) was an >issue in LR1, but shouldn't Aobe have fixed it by now?? Just as an aside, >if I'm having this issue with .arw files, when I import the RAW images from >my Minolta 7Hi I wonder if I'll have the same issue. > Since its a trail version I'm not eligible for Adobe support, so there is > no help coming from there.

SQL Developer export files not visible

Hi All,
I've started using SQL Developer recently and I am completely new to this tool.
I've noticed a weird problem. All the export files and the folders I create from SQL Developer is not visible from the normal windows. Say I've executed a query and I need to export the output to a file. I right-click on the data grid; select Export Data -> xls/csv (anything) . I get a pop to mention the Location of the file. I click on Browse ; then select the location and then click on apply. I expect the file to be created. But when I go to that folder; I do not find any files.
To add on to my suprise; If i click on open a file and navigate to the above mentioned path; the pop-up shows that the file is present in that folder. But it is not visible from Windows. This is of no use as I cannot use those files.
BTW; version is 2.1.1.64
Note: I've also enabled the option of viewing all hidden files and folders in Windows.
Regards,
Arun

Hi Arun,
If you are using Windows Vista, Windows 7, or higher, and writing to a directory (like C:\, C:\Windows\, C:\Program Files\) that Microsoft wishes to protect from malware or just simple clutter , then you are running afoul of a redirect feature in the OS that puts the unwanted file in a VirtualStore folder for your user name, specifically:
C:\Users\<yourusername>\AppData\Local\VirtualStore\<full path where you think the file got stored>See the following for details:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folder-redirect-in-windows-7/95218744-37e6-40cd-b890-2e647351df16
I just ran across this myself for the case of C:\ and perhaps this applies to your situation also.
Regards,
Gary

Placeholder content not visible in Preview

I am a RoboHelp10 newbie with two projects on the go, one inherited and one new. Placeholder content (breadcrumbs and Topic TOCs) is visible in Preview mode (Ctrl+W) in the inherited project, but not in the new project. They don't show in Firefox/IE Preview either. All other content/formatting seems to preview just fine. MS_HTML_Help is the designated primary layout for both projects. Based on a post in this forum, I tried updating DHTML effects, but it didn't help. Any suggestions?
I am assuming if they don't appear in Preview, they won't appear in the generated CHM. Correct?
RESOLUTION: I finally fixed the problem with brut force by starting a new project and importing the HTML pages, etc. Even then, it took a few tries before it worked. Still don't know the underlying cause.
Message was edited by: Steve@SSA on 16Nov2013

Vamsi mailed me offline and I have suggested looking at Using RH7 on my site where this problem is covered.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

DNG files not visible in Lightroom 2.5

I've installled Lightroom 2.5 in my old desktop (Pentium 4, 1 GB RAM, Windows XP Home SP 3). After I've imported my camera RAW (NEF) images into Lightroom as DNG, I can see the photo info but photos are not visible.How can I make them visible?

I wonder if you have been using sidecars, as I had assumed. Maybe you've got a metadata template? "XMP files" norrmally refers to sidecars, but could refer to templates too. So which is it? How exactly have you been assigning this file to images in Photoshop? I don't know the detail of Photo Mechanic, though I'm betting your friend has been applying a template. If you do this first, you can then use that Read metadata technique. Once you've done that once, in LR you can save the metadata as a preset, or sync it to other images. Sadly LR can't read metadata templates directly.

RX100 ARW files not visible in preview in Bridge CS6

Similar Messages

Maybe you are looking for