RZ21 - ICM_HTTP_CONNECTION_FAILED when adding a new system

HI,
I installed saphostagent on a sateliete system (Linux suse 10 with Oracle 11) to be able to monitor the system with our SolutionManager.
Our Solution Manager is on 7.01 EHP1 support pack 8.(WIndows 2003 with SQLserver 2005)
When I try to add the system to be monitored in Solution Manager with transaction RZ21 I get an error.
In RZ21 : --> technical infrastructure --> configure central system --> create remote monitoring entry
I fill in all the details, and when I save, I get the following error message:
SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")"
I found SAPnote 1450589, which descibes the error, but unfortunately our system is already on the mentioned support pack in this note, so this note is not applicable for us.
Does anyone got an idea on what can be causing this error?
Thanks in advance,
Menno

Hi,
ICF errors nt the program errors, it is just the connection failure errors,
please check the RFC for the managed system which you maintained in the remote monitoring entry in RZ21.
please correct that RFC connection, it could be any reason,check this too
http://help.sap.com/saphelp_nwes70/helpdata/en/45/eea8864e134f858b4d561f53058412/content.htm
Thanks,
Jansi

Similar Messages

When adding a new event, I cannot put the location in. It will not allow me to do that.

How do I get the location area to work when adding a new event? The location area will not allow me to enter information.

How do we find a remedy?

When adding a new photo to an album in iPhoto 8 it changes the order of the photos in the album; how do I stop this ?

when adding a new photo to an album in iPhoto 8 it changes the order of the photos in the album; how do I stop this ?

View Menu -> Sort Photos...

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

CRM 2013 error when adding a new appointment in Outlook.

When added
NEW DEADLINE The outlook on the calendar, I received an
error in CRM.
/////ERROR//////////////////////////////////////////////////////////////////////////////////////////
[2015-03-05 09:20:34.403] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(String message, Int32 errorCode) ilOffset = 0x5
at SecurityLibrary.RetrievePrivilegeForUser(IUser user, Guid privilege, ExecutionContext context) ilOffset = 0x14B
at SecurityLibrary.TryCheckPrivilege(Guid user, Guid privilege, ExecutionContext context) ilOffset = 0x3D
at SecurityLibrary.TryCheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x42
at SecurityLibrary.CheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x0
at AddressManager.GetOwnerCandidate(AddressEntry addressEntry) ilOffset = 0x50
at AddressResolver.BuildResolvedAddressEntry(AddressCategory category, BusinessEntity businessEntity, Guid& objectId, Boolean active, String emailAddressMatched) ilOffset = 0x58
at AddressResolver.GetPrunedList(BusinessEntityCollection responseCollection, AddressCategory category, Hashtable removeDuplicateFilter) ilOffset = 0x6B
at AddressResolver.DoResolve(AddressEntry[] addressEntriesToResolve, Int32[] objectTypes, Boolean matchPartialEmailAddresses) ilOffset = 0x70
at AddressManager.ResolveEmailAddressInternalHelper(String emailAddresses, Int32[] objectTypeCodes) ilOffset = 0x1F
at CommunicationActivityServiceBase.ResolveUnresolvedParties(BusinessEntityCollection parties, Int32[] objectTypes, ExecutionContext context) ilOffset = 0x5C
at AppointmentService.Book(BusinessEntity entity, ExecutionContext context) ilOffset = 0x3D
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at   ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
[2015-03-05 09:20:34.572] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Platform.Sdk |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | VersionedPluginProxyStepBase.Execute
ilOffset = 0x65
>Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
   at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
   at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
   at System.Globalization.CultureInfo..ctor(Int32 culture)
   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.579] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(Exception innerException, Int32 errorCode, Object[] arguments) ilOffset = 0xB
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at   ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
   at System.Globalization.CultureInfo..ctor(Int32 culture)
   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.580] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread:   28 |Category: Platform |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | MessageProcessor.Execute
ilOffset = 0x1C5
>MessageProcessor fail to process message 'Book' for 'appointment'.
[2015-03-05 09:20:34.581] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread:   28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertToFault
ilOffset = 0x69
>UNEXPECTED: no fault?
[2015-03-05 09:20:34.582] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread:   28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertMessageAndErrorCode
ilOffset = 0x23B
>System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.
>   at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
>   at System.Globalization.CultureInfo..ctor(Int32 culture)
>   at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
>   at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
/////END ERROR//////////////////////////////////////////////////////////////////////////////////////////
And then the
date of the duplicates in the calendar
in Outlook and CRM.
My version CRM 2013 -
6.1.2.112
Crm2013wasthemigratedfromthe
2011 version.
Does anyone have any idea how to
solve it.

I checked it, these errors
occur on all users. Below
the main errors that occur.
Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
MessageProcessor fail to process message 'Book' for 'appointment'.
System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.

I lost the lan ethernet connection of an older windows 7 pc to my 3 Terabyte router when adding a new local printer to the pc. How do i set this up again so the PC is recognized and can get to the internet again through the time capsule?

I recently added a new printer to a 2005 vintage PC that is running windows 7. It used to go through a router in my wifes upstairs office to the time capsule by wired ethernet (cat5) but when I added her new local printer thought I would network it, big mistaked, lost all my ethernet connection and she cannot get to the internet. Wireless not an option. How do i set up again the ethernet connection and i will only USB the printer locally this time for the windows pc?
Tried windows diagnostics, and besides telling me to reset everything and turn router off and on etc. I am in an endless loop.
Other Mac products are not impacted by this issue.

I see no direct connection.. a printer and the computer setup for internet are not related.
But it sounds like the router in the wife's office is now in the wrong mode..
If you have an existing main router replace the second router for a switch .. that is the easy way.
Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
BUT I am making a huge number of assumptions.
What I need is the full network layout.. a quick picture would help.
I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
I need secondary router.. if that is what it is, IP and settings.
I want the printer type and model. How it is connected.
BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

Adding a new system to existing ChaRM Project

Hi,
We have configured Charm in our landscape and we use Solution Manager 7.1 SP08.
Requirements:
Add a new system to the existing ChaRM Project.
Edit the logical components for e.g. To replace current SID (QA1) with another SID (QA2)
Add items (Systems or Tasks)to the existing task list
We faced problems (duplicate record dumps), while configuring as per our requirements above. SAP suggested us to
Close the Project and create a new one to include a new system. [This is not feasible for us]
Close the current maintenance cycle and create a new one if you want to edit the logical systems or to add any task or system to the existing task list.
So we have the following questions
What is the impact on closing the current maintenance cycle? We have half of transports in released and half in locked status.What happens to the transports that are not yet released?
Will they automatically get released or
Will they not get impacted or
Will they get assigned to the new maintenance cycle automatically or
Do we need to do it manually or does it not matter
Since we are close to starting our ITC, how do we go about that? How will we bundle our transports for our ITC with different maintenance cycles holding transports
What is the impact on locking a maintenance cycle?
What is the impact on project team members on creating a new maintenance cycle?
How does the maintenance cycle get impacted if we refresh existing systems?
Have you faced a similar problem? Is there an alternate solution?
If we need to add a new development system to the Project do we need to close the current project or just add it to a new maintenance cycle?
Reporting
How do we run a report for stats by Maintenance cycle
--> System --> Transport released
--> System --> Transports created (not released)
How does reporting get impacted if we make the changes stated above

Hi Nanada,
check the below blog,to adding - Add a new system to the existing ChaRM Project.
Charm task list creation for newly added system... | SCN
So we have the following questions
What is the impact on closing the current maintenance cycle? We have half of transports in released and half in locked status. - dont close the MC with out proper TR movement in PRD. it will make the system inconsistency. if it is released TR not able to unassigned from MC . this feature available from SP10. What happens to the transports that are not yet released?
Will they automatically get released or - no
Will they not get impacted or - make solman inconsistency
Will they get assigned to the new maintenance cycle automatically or- if not released from DEv, it needs to assign manually from one MC to other MC
https://websmp106.sap-ag.de/~sapidb/011000358700000611352012E/index.htm
Do we need to do it manually or does it not matter - yes, check the above link
Since we are close to starting our ITC, how do we go about that? How will we bundle our transports for our ITC with different maintenance cycles holding transports
What is the impact on locking a maintenance cycle?
What is the impact on project team members on creating a new maintenance cycle?
How does the maintenance cycle get impacted if we refresh existing systems?
Have you faced a similar problem? Is there an alternate solution?
If we need to add a new development system to the Project do we need to close the current project or just add it to a new maintenance cycle?
Check the Dolores blog -
Change Request Management scenario: Usual questions and known errors
Rg,
Karthik

DSWP - Nothing happens when you create new system

Hi SDN
How are you?
We are on Solution Manager 4.0. I have already defined 3 systems in transaction DSWP.
I have recently applied support packs 9 and 10. Now when I try to define a new system in transaction DSWP, nothing happens.
When I click on the "New: button, I am prompted to enter the system and the Language.
I enter PRD for system and keep the Language as EN.
I then have 2 options "continue" or "cancel".
No matter what button I press, nothing happens.
I then tried to copy an existing system, and again nothing happens.
Any help that you provide would be appreciated.
Thanks
Sam

Hi Ragu
Thanks for the response.
SAP actually came back with a fix.
I had to apply Note 1008717 )HTMLViewer: Postdata of length more than 255 gets)
Once I applied this my problem was fixed.
This was working prior to me implementing SP 9 and 10 on SolMan 4.0. So the above note might be needed for all who implement this support pack.
Thanks again fro the help.
Regards
Sam

Going to the last page of a table when adding a new object

I added a Table(com.sun.rave.web.ui.component.Table) on my page and a button outside of that table to add new object rows. My problem is that I want the table to move to the last page when I add a new object. Instead the default bahaviour is showing the first page. Even if the newly added row is on a page > page 1.
e.g If I have a table with 5 pages and I am on page 1 and I add an object I want to see the last page of the table where I added the new object. In other words I want it to go to page 5 or page 6 in case the number of the new object is > the number of displayable rows of a page.
I did it with Javascript but I just dont like it. I wanna do it programmatically.
Any help?
Thanks in advance guys!!!

Hi!
Try to look here:
http://forum.java.sun.com/thread.jspa?threadID=5142038&tstart=45
Thanks,
Roman.

When adding a new OU container to User Profile Sync the users does not get synchronized

We have an OU that users on leave are located. These users would "fall out" of sharepoint when moved to this OU, so I went in the sync and ticked on that that OU to be synced as well.
When running a new sync after this change, it only syncs one user, although the OU has about 30 users there. Same result if I do a full sync or an incremental sync.
Any help would be greatly appreciated.

Double check that the user really is being synced. The most common issue is caused by user error when people think a user is being synced but is not.
Once you've validated that the user in the OU really is being updated in SharePoint you should check your synchronisation connection rules. Identify which filters you have set and check one of the non-importing users in the OU. Check each and every one of
those filters to try to identify which is causing them to be removed.
Finally you can also check the MIIS client which sometimes gives more information about why users are or are not being imported.

"Program terminated in remote system NONE: Logon failed" when adding a new table

Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
Christian

First thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
 One monitoring job (master job)
 One master controller job
 At least one data load job
 One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
 At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
 Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
 The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
 Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
 The Number of required data transfer jobs ,
 plus one background work process for Central Master (Monitoring) Job (only one per system!),
 plus one background work process for Master Controller Job,
 plus 3-5 additional empty background work processes (recommended per configuration),
 plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian

Error 1430 when adding a new VI to the program

I have a program I developed in LV 2009 in 2009 and now I am updating it. I accidently opened it up in 2010 and saved it. There are Microsoft office tools that were built into LV 2009 that are removed in 2010 that I had used in my program. So I had to save as previous version (2009). After everything worked and I could run the code and compile I continued developing. At one point I tried to compile and got an Error.
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1430 occurred at Create Folder in Create Directory Recursive.vi->AB_Destination.lvclass:Create_Destination.vi->AB_Build.lvclass:Create_Destinations.vi->AB_Application.lvclass:Create_Destinations.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Item_OnDoProperties.vi->AB_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path.
<Not A Path>
I have now figured out that if I add a new VI to the program, it gives this error. If I remove the VI, it compiles with no errors. If I add a blank VI with no code, it gives the error. I have worked as far as I could without adding a VI but now i need a pop up window and need to the VI. The code is too large to fit the max 6MB requirements.
Thanks
Matt
Solved!
Go to Solution.

Hi mattyk,
When you say compile, do you mean press the run button? When exactly does this error show up?
I suggest you try copying all of your VIs into a new project, and try running the new project. It sounds like your project may have been corrupted in the process of upgrading and re-saving to a previous version.
I hope this helps! Regards,
Emily C
Applications Engineer
National Instruments

DB_REP_JOIN_FAILURE when adding a new replicated environment

Hello,
I'm developing a replicated system using the Base Replication API. At the moment this works quite well except for the case that I add a new replicated site (Site N).
On Site N I start with rep_start(NULL, DB_REP_CLIENT). After some messages have been transfered between master an Site N, rep_proccess_message's return value is DB_REP_JOIN_FAILURE. Right before that I get "Client was never part of master's environment" on stderr. If I shutdown Site N and restart it while the MASTER is still alive, syncronization works without problems.
Here are the relevant db debugging messages:
----CLIENT----
CLIENT: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 0 eid -1, type newclient, LSN [0][0] nogroup nobuf
CLIENT: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 0 eid -1, type newclient, LSN [0][0] nogroup nobuf
CLIENT: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 500238513, type newsite, LSN [0][0]
CLIENT: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 0 eid -1, type master_req, LSN [0][0] nogroup nobuf
CLIENT: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 500238513, type newmaster, LSN [1][328836]
CLIENT: Election done; egen 1
CLIENT: Updating gen from 0 to 1 from master 500238513
CLIENT: Egen: 2. RepVersion 4
CLIENT: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid 500238513, type verify_req, LSN [1][361051] any nobuf
CLIENT: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 500238513, type newsite, LSN [0][0]
CLIENT: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 500238513, type newmaster, LSN [1][328836]
CLIENT: Election done; egen 2
CLIENT: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 500238513, type newmaster, LSN [1][328836]
CLIENT: Election done; egen 2
CLIENT: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 500238513, type verify, LSN [1][361051]
CLIENT: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid 500238513, type verify_req, LSN [1][179440] any nobuf
CLIENT: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 500238513, type verify, LSN [1][179440]
Client was never part of master's environment
debug: rep_process_message() threw an exception: DbEnv::rep_process_message: DB_REP_JOIN_FAILURE: Unable to join replication group
------MASTER------
MASTER: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 0 eid 17802195, type newclient, LSN [0][0] nogroup
MASTER: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid -1, type newsite, LSN [0][0] nobuf
MASTER: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid -1, type newmaster, LSN [1][328836] nobuf
MASTER: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 0 eid 17802195, type newclient, LSN [0][0] nogroup
MASTER: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid -1, type newsite, LSN [0][0] nobuf
MASTER: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid -1, type newmaster, LSN [1][328836] nobuf
MASTER: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 0 eid 17802195, type master_req, LSN [0][0] nogroup
MASTER: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid -1, type newmaster, LSN [1][328836] nobuf
MASTER: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 17802195, type verify_req, LSN [1][361051]
MASTER: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid 17802195, type verify, LSN [1][361051] nobuf
MASTER: ../../../runtime/knowledge rep_process_message: msgv = 4 logv 13 gen = 1 eid 17802195, type verify_req, LSN [1][179440]
MASTER: ../../../runtime/knowledge rep_send_message: msgv = 4 logv 13 gen = 1 eid 17802195, type verify, LSN [1][179440] nobuf
Any help is greatly appreciated.
Regards Jan

Hello Jan,
I have two questions for you to start.
1. What version of BDB are you using? Since 4.6.21, we have changed the code so
that the client would discard and restart. If you could try a more recent version
of BDB you may find it behaves the way you expect. I'm assuming you expect
it to discard whatever is on the client.
2. The verbose log you posted indicates that the client has substantial amounts
of data and log, that are completely disjoint from the replication group
to which you are adding this client. Where does that log come from? If
this is a brand new client, why isn't its environment and log clean and empty?
Sue LoVerso
Oracle

Adding a new system to the transport domain

Gurus ,
   currently our landscape is a 3 system landscape . We are SAP BUSINESS SUITE users . we are using ECC 6.0 on AIX with AS ABAP .
   we are planning for one sand box system on AIX with both AS ABAP and AS JAVA . but we have certain confusions and lack of clarity on certain portions . hope over which you all can throw light ,
   - Will there be any difference in license info for using ECC with AS ABAP (or) ECC with AS ABAP + JAVA .
- would be able to add this system to our transport domain without including the system in solution manager
- can we make clinet copies from a ECC system with ABAP alone to a ECC system with ABAP +JAVA
- How to get more clarity on the license perspective of adding this system
please guide us

1. Will there be any difference in license info for using ECC with AS ABAP (or) ECC with AS ABAP + JAVA .
According to me there is not any differences in license, when you apply for the license you have to select the system as ABAP+JAVA and i dont think that you need to install any license for java in ECC
2. would be able to add this system to our transport domain without including the system in solution manager
Yes if Solution manager is not your domain controller. You can add the system into your domain, For the transport between 2 system is the requriement is that both system should be same relase with Same ABAP support pack and Kernel (as per my understnading).
3. can we make clinet copies from a ECC system with ABAP alone to a ECC system with ABAP +JAVA
This is think might not be possible but not sure for this, becuase there must be some ddic difference in both system.
Please correct me if i am wrong.
Regards,
Subhash

Smart Plug Connection Issues when adding to your system.

I just got my new smart plugs in the mail, and there was an issue setting them up. The pairing was not happening. We tried for a good 20 mins following the instruction for pairing the devices. I got them to finally pair when instead of doing a 2-3 second button press i switched to a double tap quick press. The devices were dicovered right away. Looks like the instruction for the devices dont seem to match up with what the support is told to do to pair those smart plugs. I wanted to share so you guys could look into this as the rep that helped me today said these are always tricky for them to get connected. Recap Doing 2-3 second delayed button presses did not work. Doing 2 quick presses of the button made the smart plug start clicking. I could hear it turning on and off.

I don't want to create another user in the business system for this purpose, does anybody
know what other configurations should I do for retrieve the message details automatically without
any login information like retrieving the message list.
Check if you can apply Single-Sign-On....
Refer this link from help:
http://help.sap.com/saphelp_nwpi71/helpdata/en/32/1c1041a0f6f16fe10000000a1550b0/frameset.htm
Section from the link:
Since the Runtime Workbench communicates with AS ABAP, the Java logon ticket key pair must
be modified, and the corresponding certificate must be exported from AS Java and imported to AS ABAP.
Hope it helps...
regards,
Abhishek.

RZ21 - ICM_HTTP_CONNECTION_FAILED when adding a new system

Similar Messages

Maybe you are looking for