RZ70 was ended with time-out.

I'm installing NW2004s SR2 with PI/XI usage:
I'm using Central SLD. At RZ70 phase I got time-out.
What is the reason of this?
Thanks

I gave up Central SLD and I did reinstallation with local SLD.That time no problem with Rz70.

Similar Messages

  • WIB: Eliminate the option to save after a function was ended with an error

    Hi Xperts,
    is there any possibility in the Web Interface Builder to eliminate the option to save after a function was ended with an error-message?
    Appreciate any help.

    The Firefox 4+ versions automatically save your session when you close Firefox. If you want to restore your previous session the next time you open Firefox, use the Restore Previous Session button on the default about:home homepage or in the History menu.

  • At my wits end with Time Machine

    I had Time Machine running flawlessly over from November right up until February of this year. Then being naive, I never really payed much attention to it, as it was working 100%. I even performed a completed system restore in March of this year. However, since around mid-March, it stopped backing up.
    I did notice that it was complaining about running out of space, and it told me it was going to clean up the drive to make room. Pretty much from that point onward, it has not worked. I have even gone so far now as to completely repartition the drive and start clean again. However, each time, the backup hangs at about 1.97GB of 95.96GB. The external drive is 320GB. I have read through the forums, and cannot seem to see what do next (outside of a complete reload of my iMac).
    Thinking it may have been a drive issue, took the external drive to my Windows Media Center, and tested it from there copying over 50GB with no issues.
    I am not running antivirus software on my iMac, and I even uninstalled Paralells...but no go...
    If anyone can provide me with suggestions on what else to try I would appreciate it. Checking the System.log, there are no errors visible....

    I have run Disk Utility several times on both the iMac drive and the external drive. No errors are ever reported.
    I have since backed up my data to a Windows Server, and reloaded the iMac from the ground up, applied all of the updates, and attempted to start Time Machine again. The problem still persists. Yet this drive will work flawlessly in Windows. There must be something that came down in the last update that broke my Time Machine for some reason.....I have no other explanation.

  • Repository Creation fails with Time Out Error

    Hi
    I am trying a test setup of OVM3.1.1-305. I am using OpenFiler for iSCSI disks and have created 20GB iSCSI disk for Pool FileSystem and another 260GB iSCSI disk for Data Repository. The server pool gets created fine with the Pool FS and HA and Cluster options enabled. But while exposing the iSCSI disk for data store the job times out. Details of the error message is as below, please help!
    The Job has timed out while executing, and will be aborted.
    Job Construction Phase
    begin()
    Appended operation 'File System Construct' to object '0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)'.
    Appended operation 'Cluster File System Present' to object 'fb5840a9a3a78f51'.
    Appended operation 'Repository Construct' to object '0004fb00000300009bfb51738df3f282 (OPNFILER (2))'.
    commit()
    Completed Step: COMMIT
    Objects and Operations
    Object (IN_USE): [LocalFileServer] 0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)
    Operation: File System Construct
    Object (CREATED): [Repository] 0004fb00000300009bfb51738df3f282 (OVSRepos)
    Operation: Repository Construct
    Object (IN_USE): [LocalFileServer] 0004fb0000090000a8d525219658c28a (Local FS ibcovs2)
    Object (IN_USE): [Cluster] fb5840a9a3a78f51
    Operation: Cluster File System Present
    Object (CREATED): [LocalFileSystem] 0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)
    Object (IN_USE): [StorageElement] 0004fb0000180000bf6e8d3ff957b21b (OPNFILER (2))
    Job Running Phase at 04:01 on Mon, Dec 3, 2012
    Job Participants: [44:45:4c:4c:48:00:10:44:80:52:b4:c0:4f:33:42:53 (ibcovs1), 44:45:4c:4c:48:00:10:46:80:32:c6:c0:4f:34:42:53 (ibcovs2)]
    Actioner
    Starting operation 'File System Construct' on object '0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)'
    Job: 1354487506506, aborted post-commit by user: admin
    Write Methods Invoked
    Class=InternalJobDbImpl vessel_id=2477 method=addTransactionIdentifier accessLevel=6
    Class=LocalFileServerDbImpl vessel_id=788 method=createFileSystem accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setName accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setFoundryContext accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=onPersistableCreate accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setLifecycleState accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setRollbackLifecycleState accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setRefreshed accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setBackingDevices accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setUuid accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setPath accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setSimpleName accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=addFileServer accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setStorageDevice accessLevel=6
    Class=StorageElementDbImpl vessel_id=1121 method=addLayeredFileSystem accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setSimpleName accessLevel=6
    Class=LocalFileServerDbImpl vessel_id=922 method=addFileSystem accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=addFileServer accessLevel=6
    Class=ClusterDbImpl vessel_id=1340 method=addLocalFileSystem accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setCluster accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=setAsset accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=createRepository accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setName accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setFoundryContext accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=onPersistableCreate accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setLifecycleState accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setRollbackLifecycleState accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setRefreshed accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setDom0Uuid accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setSharePath accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setSimpleName accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setFileSystem accessLevel=6
    Class=LocalFileSystemDbImpl vessel_id=2486 method=addRepository accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setManagerUuid accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setVersion accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=addJobOperation accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setSimpleName accessLevel=6
    Class=RepositoryDbImpl vessel_id=2492 method=setDescription accessLevel=6
    Class=InternalJobDbImpl vessel_id=2477 method=setCompletedStep accessLevel=6
    Class=InternalJobDbImpl vessel_id=2477 method=setAssociatedHandles accessLevel=6
    Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_B000E Storage plugin command [storage_plugin_createFileSystem] failed for storage server [0004fb000009000001b30fa7bc24bef1] failed with [com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
    Mon Dec 03 04:03:48 IST 2012
    Mon Dec 03 04:03:48 IST 2012] OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
    Mon Dec 03 04:03:48 IST 2012
    Mon Dec 03 04:03:48 IST 2012
    Mon Dec 03 04:03:48 IST 2012
    at com.oracle.ovm.mgr.action.StoragePluginAction.processException(StoragePluginAction.java:1371)
    at com.oracle.ovm.mgr.action.StoragePluginAction.createFileSystem(StoragePluginAction.java:894)
    at com.oracle.ovm.mgr.op.physical.storage.FileSystemConstruct.createFileSystem(FileSystemConstruct.java:57)
    at com.oracle.ovm.mgr.op.physical.storage.FileSystemConstruct.action(FileSystemConstruct.java:49)
    at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1009)
    at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
    at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
    at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
    at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
    at com.oracle.ovm.mgr.api.physical.storage.LocalFileServerProxy.executeCurrentJobOperationAction(Unknown Source)
    at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
    at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
    at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
    at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
    at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
    at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
    at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
    at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
    at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
    at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
    at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
    at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
    Mon Dec 03 04:03:48 IST 2012
    Mon Dec 03 04:03:48 IST 2012
    at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
    at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
    at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
    at com.oracle.ovm.mgr.action.StoragePluginAction.createFileSystem(StoragePluginAction.java:890)
    ... 27 more
    Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
    Mon Dec 03 04:03:48 IST 2012
    at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
    at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
    ... 30 more
    FailedOperationCleanup
    Starting failed operation 'File System Construct' cleanup on object 'fs_OVSRepos'
    Complete rollback operation 'File System Construct' completed with direction=fs_OVSRepos
    Rollbacker
    Executing rollback operation 'File System Construct' on object '0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)'
    Complete rollback operation 'File System Construct' completed with direction=DONE
    Objects To Be Rolled Back
    Object (IN_USE): [LocalFileServer] 0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)
    Object (CREATED): [Repository] 0004fb00000300009bfb51738df3f282 (OVSRepos)
    Object (IN_USE): [LocalFileServer] 0004fb0000090000a8d525219658c28a (Local FS ibcovs2)
    Object (IN_USE): [Cluster] fb5840a9a3a78f51
    Object (CREATED): [LocalFileSystem] 0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)
    Object (IN_USE): [StorageElement] 0004fb0000180000bf6e8d3ff957b21b (OPNFILER (2))
    Thanks & Regards

    check your messages log and etc on the VM server. The job log doesn't go into enough detail to tell what's causing the issue. It did fail cleanup. Meaning.... that your ocfs2 filesystem is probably orphaned. You have have to clear the iSCSI LUN before trying again.

  • Unlocking external hard drive that was locked with time machine

    I use a MBP Retina (Mid 2012) with OSX 10.9.4.  I left the MBP at Apple for repair and they changed the mother card and reformatted my HD (SSD).  Since I had a backup on a WD My Passport external drive I was not too worried to restore.  I had clicked the option "password protected" on TM and therefore the external HD was password protected.  I also copied pasted many files on the same external hard drive, in case TM would fail one day to operate I thought that I would still have my files ...
    But I was very surprised that when I plugged in my external HD into my MBP it didn't recognize it at all.  The external HD did not appear on the screen anymore.  Nor in Finder.  It appeared in Disk Utility but it could not be mounted.  Basically it was impossible to access my data.  After a while and talking with Apple Support on the phone we could reach a point where a window appeared asking me the password for the access to the HD.  Unfortunately it didn't work.  The .  password was not recognized.  Even though we had selected the right country with the icon upper right on the screen to make sure that we used the correct keyboard.
    So finally I reinstalled completely the OSX (coming rom Lion all the way to the last OSX) on the MBP and finally I could restore it with my TM.  I spent three days on this since it only worked with one OSX - don't remember honestly which one -  and not the last one.  Don't know why.
    Anyway. 
    Today I have my MPB working but I miss all the files that are still on my external HD because I cannot access to it anymore.  As I said the recovery happened all of a sudden with TM with a former OSX and not the 10.9.4.  With this current OSX my HD does not appear on the desktop nor on finder. Nothing.  It is locked by TM and I cannot even key in the password to unlock it.  Useless to say that I have the password.
    Any idea how to sort this out please ? Thanks

    This might work. Courtesty of V.K.:
    run the following terminal commands (copy and paste, please)
    sudo chflags 0 /volumes/*
    sudo chmod a+rx /volumes/*
    you'll have to enter your admin password (which you won't see). that's normal. this should unlock your drives.

  • Urgent: Issue with time out sql auzre

    We are trying to connect to our SQL AZURE databased (Northern Europe) we keep getting timeout error. Initially it was post-login phase error and now we keep getting 10600 error. We are on V12 version.
    Any ideas please?
    Here is the detail 
    An unhandled exception of type 'System.Data.SqlClient.SqlException' occurred in System.Data.dll
    Additional information: Connection Timeout Expired.  The timeout period elapsed during the post-login phase.  The connection could have timed out while waiting for server to complete the login process and respond; Or it could have timed out while
    attempting to create multiple active connections.  The duration spent while attempting to connect to this server was - [Pre-Login] initialization=303; handshake=922; [Login] initialization=0; authentication=0; [Post-Login] complete=13000;

    Resolved offline.
    In general, please follow best practices on the linked documentation page below with regards to connectivity issues :
    http://azure.microsoft.com/en-us/documentation/articles/sql-database-connect-central-recommendations/ .

  • ST03N in BW ending in time out error

    Hi,
    only a particular user in the BW system is getting the time_out, Memory related dumps while executing the transaction ST03N to check the BI workload. I guess the user has given a 'user defined time selection' and this setting has got saved for his u id.
    Seems like large amount of data is getting retrieved for the selection made.
    system is NW 7.0 and ST has the relatively newer patch.
    How can we revert back the user specific settings and make ST03 accessible for the user again?
    Thank you.
    Regards,
    Balaji Srinivas

    Thanx Juan.
    Now user is able to execute ST03N. But while checking the stats for a month say Jun-Jul, there is a BCD or arithmetic Overflow dump. Seems like the value is out of range for a particular field.
    Any way to correct this? or fetching the data with small intervals is the only option available?
    Thnx.

  • API calling  with Time-outs

    I am trying to implement a feature on a Stateless EJB so that when I try to access a resource and that resource doesn't respond at a given time, I want to interrupt the operation and get back to another processing (timeout).
    Today I have this approach in J2SE using Threads but I know you cannot start Threads from within an EJB. Do you have any ideas on how to implement a timeout in this scenario? Could be something like:
    J2EE Stateles EJB -- method call --> "Untrusted" Java API Call
    What I'd like to do is to timeout this method call.
    Any ideas?

    It is the way you configure your pay elements.
    the standard process doesn't pay for the balance
    You need to handle using your formula

  • Delete Indexes  Variant ended with errors in Process chain

    Hi experts,
    I have a process chain which executes dialy to load data Info Cube we create the index and finally  we delete the index after that we have few variants..
    Remaining all variants are executed with out errors except delete index variant I checked the error message it shows that <b>" The system has not finished loading request APO_R46PWZHRIA7JS9NOM8X879QEZJ into data target ZUP_CARF1"</b>
    It  is so happened weekly twice or trice not every day.  one day it was running with out any errors and one day this process chan was ended with errors.
    I need to know the  reason why this variant was executed with errors.?
    I need your valule sugestions regarding this issue.
    Regards
    sailekha

    hi sailekha,
    therevare some functional constraint of processes.
    while deleting indexes
    it is not possible to:
                                  loading
                                  indexes are being built
                                  stastics are being built
                                  during rollup
                                  while compressing
                                  while updating.
    my be u can check which is the other process chain that does all above oprations in concerned infoprovider.
    bye

  • List of all users attached to a role iview time out / Action canceled

    Hello All,
    I've created a custom iview which pulls all the users assigned to roles. It gives all the users attached directly to the role and through a group to a role in a tabular form. The isolation method on the page is set to URL.
    It works fine when the number of users attached to the users are less. But for roles which has got about 30,000+ users it fails. Earlier it was giving me time out error. So increased the "Page timeout " to 25000000 which is very huge. Now it doesnt give me time out error but it comes up with a page saying "Action canceled - IE was unable to link to the web page you requested. The page might be temporarily  unavilable".
    When I run the report, it tries to get the users, it works for like 10 - 12 mins, and i think when its trying to put all those users in a table for display, it give me a blank screen (this is how it behaves for less users, just before its about to display the page), then i see IE status bar saying "Website found ....", then it says "Done" and then it gives a page saying "Acion Canceled - IE was unable to link to the web page you requested. The page might be temporarily  unavilable."
    Please help me out.
    Thanks.

    Hi Shikka,
    maybe you should not display that 30.000+ users...
    Just think how long the page will be....
    SAP uses for tables with more than 20 lines a "next page" button for a reason..... 
    How about you write the result in a txt file (in one of your par file folders) and have a download link in you iview?
    Regards,  Kai

  • Apple Mail Time Out / "Cannot Send Message Using The Server..."

    When trying to send messages of 5-10MB using my Apple Mail, it sends fine when on my home connection. But when on my (3G) mobile datacard, it seems to get half or 3/4s the way, but doesn't quite make it to the end, then times out with the message "Cannot Send Message Using The Server...". It seems that the Apple Mail doesn't allow enough time before deciding to cancel the attempted send. Is there a way to fix this eg by changing settings?

    I'm seeing something similar here (using an Exchange 2007 server -- SMTP works just fine). Unfortunately, I have no solution to offer. I would be glad to hear of any, though.

  • How do you avoid Connection Time Out when using Migration Assistant

    Connection Time Out occurred when trying to use Migration Assistant to Transfer filess from a Windows Computer to a new iMac.  What do I do to avoid this?
    I've connected the Windows computer to the iMac using an ethernet cable and both computers are on the same network.  When I started the transfer, it said it was copying the first file on both machines but nothing was happening.  Then finally it said there was a Connection Time out.  Is there anything else I need to check?

    I suspect it has something to do with your network settings on your PC. I'd recommend calling AppleCare right away. you have 90 days of free AppleCare telelphone support, they can help walk you through the process. Also if you haven't already i'd strongly recommend Pondini's guide to using Migration Assistant. You can locate it by clicking:
    http://www.pondini.org/OSX/Setup.html

  • Load Balancing Time Out Settings

    Hi, getting error below and I'm sure its to do with Time Out on Load Balancing, anyone confirm as don't want to mess around with IIS...
    The average of the most recent heartbeat intervals [499] for request [Ping] used by clients is less than or equal to [540].
    Make sure that your firewall configuration is set to work correctly with Exchange ActiveSync and direct push technology. Specifically, make sure that your firewall is configured so that requests to Exchange ActiveSync do not expire before they have the opportunity
    to be processed.
    For more information about how to configure firewall settings when using Exchange ActiveSync, see Microsoft Knowledge Base article 905013, "Enterprise Firewall Configuration for Exchange ActiveSync Direct Push Technology" (http://go.microsoft.com/fwlink/?linkid=3052&amp;kbid=905013).
    Currently timeout is set to 5mins on LB...
    Thanks!

    I'm talking about Health Check Time Values below;
    http://blogs.vmware.com/vsphere/2012/11/load-balancing-using-vcloud-networking-and-security-5-1-edge.html
    Parameter
    Description
    Interval
    Interval at which a server is pinged.
    Timeout
    Time within which a response from the server must be received.
    Health Threshold
    Number of consecutive successful health checks before a server is declared operational.
    Unhealth Threshold
    Number of consecutive unsuccessful health checks before a server is declared dead.

  • Does filevault encryption work with time machine?

    Filevault under Snow Leopard would allow you to encrypt data on your Mac disk but was not compatible with Time Machine i.e. you could not back it up once encrypted or restore it.
    Does anyone know if this has been addressed in Lion i.e. data encrypted in Filevault is capable of being backed up to a time capsule and is recoverable using Time Machine. 
    The release documentation does not make this clear, although a technician led me to believe it would be fixed in Lion.

    According to my experience and to this -> http://support.apple.com/kb/HT1427, FileVault in Snow Leopard was compatible with Time Machine.
    The thing was that, as FileVault encrypts your home folder as a disk image in 10.6, Time Machine was backing up that encrypted disk image. So
    1. Time Machine could backup your home folder only when you were not logged in your user session and the computer was awake
    2. with this system, you could not browse your home folder in the Time Machine incremental backups, but could only restore your complete home folder from that encrypted disk image.
    In Lion, however, Filevault 2 encrypts your complete hard drive.
    This means:
    1. You can use Time Machine with FileVault 2 enabled in Lion (http://support.apple.com/kb/HT4811)
    2. Recovery HD must be present on your computer's startup volume to use FileVault 2 (not an external Recovery HD) (http://support.apple.com/kb/HT4718)
    I guess Time Machine, like it used to do with the user's home folder in 10.6, will backup your encrypted hard drive in Lion, but you will not have the ability to browse your Time Machine backup to find specific files / folders in the backup. But this backup can be used to restore your system. (http://support.apple.com/kb/HT4811)
    (May someone correct me if I'm mistaken there ?)
    More info about FileVault 2 in Lion -> http://support.apple.com/kb/HT4790

  • Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion.

    Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information. 
    Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
    The path already (unsuccessfully) taken;
    Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
    This did not work because the correct date was greyed out. Restore key was greyed out.

    Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information. 
    Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
    The path already (unsuccessfully) taken;
    Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
    This did not work because the correct date was greyed out. Restore key was greyed out.

Maybe you are looking for