S_ALR_87003642 FI Periods, request, current settings

Hi all,
I have a little trouble. After support-packages the system need a request to open and close FI periods with tcode S_ALR_87003642. I've checked the system and I have not found that the current settings in tcode SOBJ por object V_T001B was changed. I've found the note 307222 'generated transactions for current setting' but I think that it is not relevant.
Any suggestion is wellcomed.
Thanks in advance.
Eduardo
PD: I'm sorry, I forgot it, we are in a ECC 50, APPL level 20 (ie: SAPKH50020)
Edited by: Eduardo Hinojosa on Jan 8, 2009 5:07 PM

In ECC.6 a request is generated in Development System for any change in OB52 / S_ALR_87003642, but the standard settings of Production System by Basis resources make it available for change without asking for Transport request.
Which system requires you the Transport Request on OB52. Is it DEV, QAS or PRD????????

Similar Messages

Posting run for future period requested (check entry)

Hi,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
I checked in OB52 postings periods are open for 2009(all periods)
SAP note 1150235 (all corrections) and 1153718 are completely implemented.
Still the problem is not resolved.
Regards,
Sankar

Hi Sankar,
I would like to refer you to the already implemented note 1153718 which states :
After you implement the changes, the system issues error message AA 697
"Posting run for future period requested (check entry)" immediately when
you use a fiscal year that is in the future. In principle, you can
customize this message. However, in this case, no settings are taken
into account; the system always issues an error message.
Regards Bernhard

Macro should only be executed for periods of current month

Hello Experts,
I am using fiscal year variant (FW) in which 4 periods exist for any month. Whenever I open the planning book, I will have to see only these 4 periods of the current month and Initial bucket.
I have a macro, that should be executed for all these 4 periods of the current month at any time during the month.
(aggregated sum of forecast of period 1 and 2 will be shown in bucket 2. aggregated sum of period 1,2 and 3 are shown in bucket 3, etc)
So, I have designed the time bucket profile with past as 1 month of Fiscal year variant FW and future of 1 month of Fiscal year variant.
My time bucket profile is 1 month - split into 4 periods of fiscal year FW.
1) The macro runs fine if the current system date lies in the second period through fourth period. But during the beginning of the month, when it is in the first fiscal period of month, it displays past 4 periods as 4 periods of previous month and 4 future periods of current month. I just want to display all buckets or periods of current month only. How can I achieve this?
2) So, during first week of the month, my macro runs only for past 4 periods and not for future 4 periods. But I want to run only from 1st period of current month till last period of current month. How to achieve this? Is there any macro function to overcome this? Or is there any standard configuration to avoid this problem?
Thanks,
Suresh

Hi Marius,
Thanks again. But, the macro code that I write, should be executed from the first period of current month to the last period of current month, even though, if the current system date is in the third period of the current month.
Also the interactive planning grid should show all the periods of current month as visible, even though I'm not in the first period of current month.
Thanks and Best Regards,
Suresh

Need to sync iPhone 4 to new laptop; don't want to setup as a new iPhone, want to keep current settings

My previous Dell laptop is crashing and I have purchased a new HP g4 laptop.
I own a 160GB iPod, iPhone 4, and 32gb iPad. I am less concerned about the iPod because that is just my music.
My problem is:
How can I sync my iPhone 4 & 1st gen iPad to my new laptop without having to set it up as a new iPhone/iPad? I want to keep all my current settings as well as my groups of apps.
Any advice?
When I setup iTunes on the new computer, I had backed up all the music and iTunes folder to my external hard drive them copied from there to the new laptop. This process did not copy over my playlists (like I was told it would). iTunes is basically setup new and does not recognize that it is just on a different computer.
I set my iPod to sync and it said "was synced with other library...erase & sync?" I said yes, because it's just music. I imported each playlist 1 by 1.
Any help is appreciated; I really do not want to have to re-setup both iPhone & iPad.
Thanks you,
lavoie25

Thank you for the advice. I had done the backup of the whole library folder to iTunes, but I did not know I had to hold SHIFT down when opening it. I had already synced the iPod when I posted the previous message.
I ended up trying a few steps that seemed to work out in my favor.
When the iPad & iPhone were connected to iTunes, I first right clicked and chose to transfer purchases from the device to iTunes (I was not prompted by the "already associated with a library" message). Once that finished, I right clicked on the device again and chose to Back Up the device (again, not promted). Once the back up was complete, I went to each device and rechose my music,apps, movies, tv shows, books, photos and then clicked to sync. I was prompted here that the device would be erased first. I was then prompted asking if I wanted to Merge Information - I chose to merge and the sync continued.
Once the siny was finished it was as if I had finished a sync with my old laptop; all my settings and everything were in place - did not have to re-enter passwords in apps or set up mail settings again.
This worked on both my iPad and my iPhone.

Report to find current settings of system in SOBJ

Does a report exists with which I can find the current settings which aren´t transportable?

Hi Damian,
Use SE16 on table OBJH where "current Setting" or column CURSETTING = X to display the objects that have current setting flag set.
Thank You.
Regards,
Deepika

Financial statement version-OB58 required in current settings

Hello Group,
I want to bring Financial statement version-OB58 in current settings like others such as OB08, OB52 and FTXP.
Can anybody suggests me about how to bring in current settings wherin I can directly modify my FSV thru OB58 in production client.
Pl.guide me.
Thanks in advance,
Regards,
Kedar.

I applied FSE2 to the Role for my Control Team to update and change the FSV.
Not sure about that note.
We find a transaction in the IMG, add it to a role and test before moving it to Production. Not all IMG activites have transactions....

Hdv current settings exported file dimension changes to 1920X1080

Hello,
I'm working with HDV-sourced footage (MPEG-2 at 1440X1080). I have a bunch of long clips I simply want to cut into smaller pieces for now. So, I've dragged the HDV footage into a sequence with HDV settings (ie. 1440X1080). I export with "Current Settings" as I want to maintain HDV file sizes and stay in the same codec as the camera and what the files were originally imported as. Then, when I check the codec in Finder, it says the files are MPEG-2 at 1920X1080. So, if the dimensions have changed, have I somehow changed the codec?

It never displayed as 1440, or at least it shouldn't have. If it did, everyone and everything would've looked squished and skinny. Your export, if it was anything other than HDV, would be 1920. Did you export ProRes, H.264, or something else? And if you exported HDV, open the clip in QT, and click on Window/Show Movie INspector. The inspector window will show you the actual encoded pixels, and the display pixels. The former should be 1440, and the latter should be 1920.

Function module reqd for fiscal period using current date

Hi,
Is there any function module which gives fiscal period using current date.
Thnaks,
Maheedhar

Hi Maheedhar,
Try the code below.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = '1000'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm    " Current Fiscal Month
    CURRY         = w_curry    " Current Fiscal Year
    PREVM         = w_prevm    " Previous Fiscal Month
    PREVY         = w_prevy.   " Previous Fiscal Year
Regards,
Amit.

Current Settings vs Uncompressed

I work with XDCam HD primarily and when exporting a final QT master I always do it "using current settings" (ie- native XDCam HD sequence settings) and get a great finished product. A collegue recently complained about a DVCam sequence he exported using the same method ("using current settings") and how the master looked compressed from the original. I looked at it and agreed. We then exported the same DVCam seguence using "uncompressed" setting and it looked better but created a HUGE file. Why does "uncompressed" look better than native? Should I be exporting my XDCam HD footage via QT "uncompressed" vs "using current settings" despite the massive file sizes (if I want the best quality)?

A collegue recently complained about a DVCam sequence he exported using the same method ("using current settings") and how the master looked compressed from the original.
I've done that a hundred times and never saw what you describe. Are you certain he exported to QUICK TIME MOVIE, selected USE CURRENT SETTINGS and DID NOT choose RE-COMPRESS ALL FRAMES. I've also read that exporting using conversion, even if you choose the same settings as your sequence, will affect the outcome.
The only way I know of to export and maintain the same quality you have in the timeline is to USE CURRENT SETTINGS.
rh

Retrieve "Start date of Next financial Period" and "Current Period"

Hi,
T-code: cne5
I would like to display 2 new fields in cne5 report result:-
1) Start date of Next financial Period
2) Current Period
I can used
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
     EXPORTING
          I_DATE         = SY-DATUM
          I_PERIV        = 'K4'
But what is I_PERIV ?
How can I retrieve the above fields value? Any Function Module that I can used?
Appreciate helps!
THanks a lot.

Hi,
Yes, i_periv is Fiscal Year Variant.
From running OB37, I can see that V3 and K4 fiscal year variant. Which one should I used when calling the function module DATE_TO_PERIOD_CONVERT?
Thanks!

Posting run for future period requested

Dear Team,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
please help to reslove the issue.
Regards,
MAhendra

Hi,
look into the Threads,
Can't Run AFAB - Posting run requested for future period
Regards
Andi

I have an annoying message that pops up saying that I have an unauthorised attempt to change the settings, and asks if I want to keep the current settings or accept the changes.

Even if I was computer literate enough to know the difference, it does not tell me what the changes are, or more iomportantly, where they have come from. I always answer, Yes, I am happy with my current settings, and ignore the No, please make the changes, but this message box keeps on presenting every time I open Firefox. I have tried right-clicking on different places on the message box, to try and find a way of removing it.. Can anyone tell me how I might remove this messgae?

Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

Why can't I toggle between current settings and defaults on the ACR basic panel?

When I try to toggle between current settings and defaults, I get a blue or black screen in the "After" image so I can not compare before and after. The toggle doesn't work when I am viewing a single image or when I am viewing before and after side-by-side. The blue or black image looks like the image is totally clipped, but it's the same whether clipping is on or off. Command-Option-P does not work either. Also, the histogram totally disappears when I try to toggle. So I think something is corrupted, and I'd like to know how to fix it. BTW, this toggle works fine when I am in the adjustment brush panel; it's the basic panel where it doesn't work. I use Photoshop CC (2014) and Bridge CC on a new iMac--Yosemite. All are up to date (ACR 8.7.1.311). I am not using Lightroom. I would appreciate a suggested fix. Confession: I am very new to the Mac environment and just returning to Photoshop after an absence so I'm finding my way; there's a good chance I'm making a rookie mistake. Thanks in advance for any help or suggestions on where else I might post my question.

The only fix at the moment is to hold the option key when clicking the green button.
Send Apple your feedback and this might get fixed: http://www.apple.com/feedback/itunesapp.html

I exported my 1080i project as QT movie with current settings but...

when I burned it onto a dvd using iDVD and displayed it on my LCD HDTV using my PS3 (more acronyms please?) it still look compressed/pixelated and had artifacts. I exported to QT movie using "current settings" so I was assuming that the quality would be as good as it was while viewing it in FCP. Any idea what happened?
(using fcp 5.1.4)

Might try using Compressor and DVD SP for the DVD creation... the encodes to MPEG are better there I believe.
Jerry

Transport current settings for KPU1

Hi,
I need to be able to make changes directly through transaction KPU1 in my production system even though the system is in not modifiable status. I have read somewhere that it may be possible to do this using by transporting the current settings using transaction SOBJ in my development. SOBJ asks for the object name. I entered RKPU1 and get the message "RKPU1 not active or does not exist" even though I can see that this table is active in SE11...Not sure how to proceed..Please advise...

2. In the transaction OMSL the Material Length is 18 which is the same in R3.
What about the above setting in QA ???

S_ALR_87003642 FI Periods, request, current settings

Similar Messages

Maybe you are looking for