S_ALR_87011990 asset history report error

Dear All
We need to process S_ALR_87011990 asset history report for year 2008 that giving an error. System recommends to proceed AJRW but it is giving error. But we did not do any Year end closed processes for Asset & FI.
We checked using OAAQ - it says 2006 last closed and tcode: OB52 says 2008 for Assets.
Appreciate your help on this.
Thanks
Madhawa
Edited by: Madhawa Jayalath on Jan 20, 2009 7:18 AM

Hello Madhawa,
ob52 controlls only the periods in the GL. It is possible to close the assets in ob52 but the AM-module is still open for this.
OAAQ displays the last closed fiscal year in AM, start AJAB for 2007 then go on with AJRW for 2009.
Best regards
Horst

Similar Messages

Error While Executing the Asset history report S_ALR_87011990

Hi,
I am getting the below error while executing the Asset History Report - S_ALR_87011990
No data was selected
Message no. AB064
Kindly advice me

Hi,
Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

Additional field in report S_ALR_87011990 - Asset History Sheet

Hi
This is with reference to report S_ALR_87011990 - Asset History Sheet .
I want to add quantity, location etc in this report.
can anybody guide me how to add these additional field in this report as in configuration no such option available.
Regards
DD

Hi,
this is decribed explicitely and detailed in the WIKI entry Include additional fields in Standard Fixed Asset ALV reports.
That´s much faster then enhancing the report. Further more you would still operate on a standard report, not a copy based on the standard report.
Regards,
Markus

S_ALR_87011990 - Asset History Sheet - Additional Fields

Hi,
in the Asset History report S_ALR_87011990 - Asset History Sheet, my client is asking to add some more fields, those fields are i check its from master data only. in this specified report we got the following fields as we required.
Asset
Sno.
CoCd
Asset Class
Asset description
Cap.date
APC FY start
Dep. FY start
Bk.val.FY strt
Acquisition
Dep. for year
Retirement
Dep.retir.
Transfer
Dep.transfer
Post-capital.
Dep.post-cap.
Invest.support
Write-ups
Current APC
Accumul. dep.
Curr.bk.val.
in addition to that my client is asking in this report some of the master data filed as following
Quantity
Eval Grp 1
Eval Grp 5
Plnt
Location
Room
deprec. Key
deprec.Rate
Cost Ctr
i checked in OAVI , i can able to add 5 fileds only that also we are already using 0001 as sort variant.
and i checked in Define asset history sheet version, here we can add the transaction data only not a master data ,
so is it possible to add those fields in the same report itself ? kindly let me know if its possible .
Thanks & Regards
ILAVARASAN TD

Also, one humble suggestion from my side
When you raise a question in SCN and it is answered, please close the thread.. If you check your account, none of your Qs are closed (http://scn.sap.com/people/ilavarasan.td/content)
When you close your questions, it acts as a reference point for others to refer in future, with confidence that the issue was resolved earlier
You can close a thread in 2 ways
1. Mark any of the answer as CORRECT ANSWER, if that has resolved your issue
2. Mark "Assumed answered" incase there is no solution to your issue or you resolved it yourself... In this case, you can also share the solution
Br. Ajay M

Asset History Report - Useful Life of the Asset

HI Freinds,
The users desire to have the useful life included in the Asset History Report generated using the T Code AR02. How can we have the useful life displayed in the Report?
Thanks for the assistance.
Regards

See the wiki how to ad new fields
https://wiki.sdn.sap.com/wiki/display/ERPFI/SAPListViewer+Basics
https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV

Asset history report (AR02)

Hi
I have posted a query in ERP Financials Asset Accounting but i didnt got any response from there.
Thats why i am posted the same query in ABAP general. Please my query in the below link.
Asset history report (AR02)

No response.

Need help on S_ALR_87011990 asset history sheet report

Hi Experts,
Could you please let me know the equivalent column in this report, when you compare to asset explorer AS03 ( APC transactions *change) record. I would like to get this APC transactions --> change value on this report.
Please let me know if you have any thoughts on this.
Thanks in Advance..
Best Regards,
Chandra.

Hi Chandra,
You have to look functional to it and not as a programmer. Tabels like anlc are not relevant for the asset history sheet report. Talk with your functional consultant / key user what he need.
Every transaction in asset accounting is based on a transaction types. The field that is filled in in ANLC is based on the transaction type. Your key user should give you the transaction types they use.
With the transaction OA81 you can see all the transaction type's that are available.
When you look to tty 100 you see that it is assigned to gr 10. The 10 is the bases if and where show it on the report

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Asset history report for bunch of assets

Hi,
I have created an asset through the following steps
Internal Order KO01
Budgeting T Code KO22
Release of Internal Order KO02
Creation of AUC AS01
Creation of PO ME21N
Now when I see the report AW01N for this asset, everything is available on the asset history sheet. Likewise I need such a report where I can pull out for bunch of assets with the above history informtion like IO No, PO No etc against those assets.
I have some 500 assets for which IO no and PO no I need against each asset.
Please tell me the standard asset report for this.
Regards,
babjee

Hi babjee,
I think you have to use for this an internal order report (line item report?. On the internal orders all information is avaiable. I think this is the reason that you use internal orders!
On the internal order you collect all the posting and the AUC is a cost collector for short term and when you settle it to the Final asset this is the endpoint.
I don't have seen that the information from KO22, KO02, ME21N are direct available in AW01N
Paul

Reg Asset History Report in SAP BI

Hi,
I need to create the riplica of AR01 which is abap report in SAP BI.
Do we have any standard Asset reports in SAP BI.
-bjob

Yes, there is business content for Fixed Assets. Please review the Fixed Assets section in the business content in RSA1.
Here is a useful thread.
Fixed assets from FI to BW
It is important to note that SAP is theoretically planning on updating some of the business content, but they have not discussed which will be updated first. I suspect that Fixed Asset reporting will be low in the list of priorities. Most BW reporting is done for large numbers of users. Fixed Asset reporting is typically done by a small group of accountants, and many companies do not implement it.
FWIW, it's never a good business practice to implement a BW reporting tool for only one or two users when there is a fully functional report in SAP that fits all of their needs. It's a waste of resources that can better serve a larger population of end users and present a better value to the business.

Asset History Sheet giving Report date 31.03.2008 invalid for this report

S_ALR_87011990 :Asset History Sheet.
Report date 31.03.2008 is invalid for this report
In the above report, if we give the Report Data, as any date other than the end month of the fiscal year, it gives the error " Report date 31.03.2008 is invalid for this report" We require this report for tax purpose upto 31st Mar08
What needs to be done ?
Thanks
amit

Hi Amit,
In AM you can only report on the dates you have set-up in period control. In the most cases this is the last day of the Month. When you have 13 periods from 4 weeks you can't report on the calendar month end.
Paul

Assets transaction history Report

Hi,
I Need to Change in the Assets Transcation History Report ,
I store Two Extra Field Information in Reclassfication,Transfer, Mass Changes
i need That Information in Assets Transcation History Report but The Transcation
id of Reclassfication,Transfer, Mass Changes in not Find from Assets Transcation
Report or Form ,Can Any Body Help me to Find the Transaction id of Reclassfication,Transfer, Mass Changes in Assets History Report
Thanks

hi
use T.code OARP you can get the some reports, if it's not suitable then you can devalop your own reports through Report painter or Query.
satish

Asset history

Hi all,
I have to create a asset history report. I get error saying Fiscal year is not maintained for the company code.
To solve this i need to proceed with transaction code AJRW to maintain fiscal year.
I am currently working in the production system and the complete data is to be archived. so i am not getting authorization for this transaction as the client is not comfortable in giving me the access for any changes to be made t the system.
can any one tell me how deal with this problem and get this report with out using the transaction AJRW.
thanks in advance,

Hi Anand,
as far as i know,
you have to execute the AJRW to solve the problem.
otherwise you can not generate the report (all asset report) even for the previous year.
hope this can help.

Asset acquisition value is not updating in Asset history sheet & AW01N

Hi,
The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
I have also checked the below link but still i am persisting the same problem.
Asset acquisition value not updating
Regards
Amit

Hi Amit,
check note 366848.
Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.
At first run the report RACORR110_B. Check the field ANLC-ANSWL bevor and after running the report.
The report RACORR110_B accumulates the values of the asset line items and writes the result in the field ANLC-ANSWL.
After this, please start the report RACORR55. This report forwards the values in the following year.
(If this is not the reason (ANLC is correct), the report makes nothing.)
Regards Bernhard

Asset history sheet version is not complete

Hi Guru,
I have implemented a new Asset history sheet version. When I run the Completion check I have the message "Asset history sheet version is not complete".
This message I see it when I run the transaction code S_ALR_87011990 - Asset History Sheet.
Do you have any suggestion?
(I have checked the sap note 658890, but the activity is done.)
Thanks in advance for all your help.
Best Regards
Giampaolo

Hi Bernhard
I checked the sap note. The sap note is implemented, but I don't understand becouse when I insert the "." in the Line 02 column 00 position group 50 and in position 75, when I click enter,the system inserts black in automatically. If I insert the "X" in Line 02 column 00 position "50" and "75" the Asset History Sheet is completed.
Do you know the possible reason?
Thanks in advance
Best Regards
Giampaolo

S_ALR_87011990 asset history report error

Similar Messages

Maybe you are looking for