S_ALR_87012079 Tcode - special GL indicator balance is not showing

Dear Friends,
When I execute the above report, it is not showing the balance for some of the special G/L's where we have created for our client's requirement.
Example: Special G/L indicator - A, B, M, G balances are all appearing, but our own created special G/L's like X,Y,Z balances are not showing.
Please let me know whether there is any procedure to bring these special GL indicator's balance as well in the above tcode.
Regards
Dwarak.

Hi,
Check the dynamic selections for the report and input the entire range of Special G/L Indicators in selection.
Hope it helps.
Ramanand

Similar Messages

  • Business area wise Trail balance is not showing balance

    Dear all ,
    I am facing problem in f.08.
    We have 5 company code ,8 Business area, We have Activated Business area wise Balance sheet in OBY6.and assigned Plant division and Valuation area .
    I am activated document splitting, Here also i maintained Business area and Profit center is mandatory field.
    when i saw the  business area trial balance gl balance is not showing its giving error" no list generated."
    Kindly suggest me what is the setting we missed.
    Thanks and Advance.
    Girish.

    Hello,
    I think, you did not set "Assign Scenarios and Customer Fields to Ledgers" customizing on SPRO.
    Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Ledgers -> Ledger -> Assign Scenarios and Customer Fields to Ledgers.
    You must define FIN_GSBER to scenarios for ledger "0L".
    Then system fills business area on table FAGLFLEXT.
    But unfortunately can not correct older data.
    Regards,
    Burak

  • TS1292 i did redeem the itune gift card the way i usually do and the balance comes up immediately. This time the balance is not showing and when I go back into try it again I am notified the number is redeemed. How do I get the credit on my account?

    i tried to redeem a gift card and have done many time previously. This time the redeemed balance is not showing in my account.
    What can I do to obtain the credit?

    Try signing out then back in to refresh your account info. If the store credits will still not update, best to contact support and have your account checked
    https://expresslane.apple.com/GetproductgroupList.action

  • Cumulative Balance (FC) not showing (********)

    After posting a Journal Entry in a different currency the cumulative balance (fc) just show "*******"
    The account is setup as a multiple currency account and we have the exchange rate setup for that particular date. We try to reverse the transaction, but the issue continue.
    thanks.

    Hi,
    The issue reported is the standard functionality. If the G\L Account is a mutli currency account and you post enteries in different currencies, then the Cumulative balance (FC) will be '******' and upon reversal of the entry posted will not clear off the same.
    The logic is that the rows total cannot be displayed in the different currencies (say eur and usd together) so it displays '******'
    Hope it clarifies.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • S_ALR_87013345 (profit centres Vendors): Balances are not showing

    Dear experts,
    We have done F.5D, 1KEK transaction and after that when we execute S_ALR_87013345 (profit centres Vendors): it is not showing any balances but balances are appearing  in S_ALR_87013344(open items-Profit centre payables) is showing correctly.
    do i need to do any other action to get the balances in S_ALR_87013345 (profit centres Vendors):
    Thanks and regards
    Ramarao

    Hi!
    TN 1KEK (program SAPMKEC6) only transfers those AR/AP postings that
    have been splitted by TN F.5D and populated in tables BFOD_A and BFOD_K.
    1KEK transfers the splitted open items that are stored in the F.5D
    split tables BFOD_A / BFOK_A into PCA tables GLPCA/GLPCT. You can use
    the report group 8A98/8A99 via transaction GR55 to investigate the
    content of the BFOD_A/BFOK_A tables. These are the reports you should
    use.
    Please read SAP notes 81374 and 107698 which will give you
    a better information/insight and starting point of a further
    investigation of what the underlying problem in your situation could be.
    BR
    Werner

  • Balance Sheet not showing correct sign for Liability and Equity

    Hai,
    I am using SAP PL 40,
    In SAP Balance sheet Report,
    Liability Ledgers and Equity Ledgers is not showing correct sign. i mean,
    In my Liability Ledger the value is
    INR-10000.
    In Balance sheet it showing 
    INR1000.
    And also, is it possible to bring Dr and Cr column in Balance Sheet?
    Now, it's coming in single Column.
    Please help me out.
    Regards,
    Thanga Raj.K
    09710445987

    Hi
    It's the system definition that under Standard Balance Sheet Report, the
    Liabilities are displayed with POSITIVE SIGN although we know that the
    balance for those liabilities accounts are negative. The reason for it
    is that the liabilities accounts are defined as Passive Account, so when
    the balance is negative, it's displayed with positive sign.  And when
    the balance is positive, it is displayed with negative sign. The
    definition is mainly for the purpose of the reporting. In most of the
    localizations, the financial reports supplied by the business should
    display Liability and Equity with positive sign.
    If you really want to display them in negative sign , you can define a
    customized report template in Financials->Financial Report Templates->
    and select all liabilities and tick the box in front of 'Reversal Sign'.
    Regards,
    Syn Qin
    SAP Business One Forums Team
    Edited by: Syn Qin on Aug 22, 2008 8:49 AM

  • Voicemail indicator (symbol) does not show on 6111

    I have no indication of when a voicemail message is left on my 6111!
    Service provider is Orange
    Has anyone else had a similar problem???

    Did this solve the problem?
    I have 2 issues with my phone and this is one of them. I tried this fix and it did not work.
    The other problem I have is that when I recieve a call the display does not show the caller ID, it only displays 'call'.
    My handset is running the firmware below:
    Nokia 6111
    V03.41
    27-10-05
    RM-82
    I am on the Orange network but the phone is an unconnected handset if that helps.Message Edited by este123 on 14-Mar-2006
    10:23 PM

  • TCode for vendor trial balance (and not profit centerwise vendors list)

    Hi
    I want  vendor's trial balance report.
    My requirement is that i want list of vendors with the balances with debits and credits separately.
    There should be four columns like:
    Vendors, Debit (Amt), Credit (Amt), Net.
    I checked SDN websites also. There were many posts but all were suggesting only one report i.e. report which is used for getting profit centerwise vendors.

    HIiiiii...............
    Greeting for the Day...........
    Pls check this report S_ALR_87012082 - Vendor Balances in Local Currency
    i thing it's help full
    Thanks & regard's
    Sachin Indulkar

  • White Balance Metadata not showing in Adobe Bridge CS6

    Hi there, I am running Bridge CS6 on a Mac, and use Canon 5D and 5DMark 111 cameras. I have an issue with Bridge which I can not seem to figure out. Whether I shoot Raw or JPG and I am trying to do some testing for white balance, once I open the images in Bridge, in the little icon panel just below the folders/favourites panel etc I can see the f stop info, speed, metering , ISO etc, but the only icons I get for WB are if use auto - then I see AUTO.  But when I do a manual WB like 'cloudy', 'tungsten', or 'shade' etc all I get are the symbols for 'Custom" or "Manual".  How do I get the actual symbols for what type of WB i've chosen to show up? 
    I have purged the Cache - both in the individual folder and the overall Cache in preferences.  I have checked that all the boxes are ticked in the preferences panel for the Metadata.  So not sure what else to do.
    Cheers D

    Ok thanks for that, at least I wont be chasing my tail.
    I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

  • Vendor Aging Report to show zero balance does not show all vendors

    Hi all,
    I would like to see a list of all my vendors in the Vendor Aging Report. I clicked on show vendors with zero balance, however, I still only get a partial list of the vendors. Is there a setting I need to set to show all the vendors? Any advice would be appreciated.
    Thank you!
    Jane

    Hi,
    I think your requirement is you want all vendors displayed irrespective of the transactions entered for that Business Partner.
    The Aging Report will display only those BPs which have transactions posted to them.
    The function of 'Display Vendors with zero balance' checkbox is that it behaves like a selection creteria and leads to inclusion
    of all those Business Partners who do not have a balance as of the current date but had a balance on the selected backdate.
    example :
    If a vendor has a balance as on 01.08.08 and is paid on 10.08.08, then the vendor will not be included in aging report (when run on 01.08.08) unless "Include Vendors with zero balance" is checked.
    This checkbox does not allow you to display all the vendors created in the database.
    Regards,
    Jitin
    SAP Business One Forum Team

  • Trial Balance Report not showing in months

    Hi All.
    A client is trying to run a trial balance, wanting it to display in months.
    He chooses monthly report, but it still gives just one total amount.
    The company he is running is a seconday company.
    He ran the report in the main company and it works fine..it shows the trial balance in months.
    Edited by: Jerusha Lala on Feb 18, 2010 8:17 AM

    Hi Jerusha,
    Have a look at the Posting period.  The reason could be the posting period was set up with "Year" instead of 'month'.
    If the posting period was set up with "Year", when a transactions is recorded, they will all belong to eg: 201001.
    If the posting period was set up with "Month" and subperiod=12, then when a transactions is recorded, they will be split into 201001, 201002, 201003 etc etc ... 201012.
    When positing period is not set up correctly, you will find out very soon that the standard financial report, eg: Profit and Loss will not split the information in the period as expected when running Monthly, Quarterly.
    Note that XL reports that make use of Financial period, to get Monthly figure will not work as well.
    Regards,

  • HT3302 damage contact indicator and there not showing but my phone wont com on or charge up??!!!

    Both mine & my boyfriends iphone 4 were in my bag on holiday & accidently the sea had started to come further up the beach, so some water had gotten in my bag... i took both phones out straight away and they were working fine! i switched mine off has i didnt need to use it and since its not coming on or charging up. my boyfriends phone is still working fine. ive checked the water damage indicator and neither of them or pick or red, there white/silver. WHAT SHOULD I DO?!!!

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
    If they did get wet and basic troubleshooting does not resolve the issue, Out of Warranty replacement is $149 (US).

  • Balance Report not showing in CAD currency

    Hi
    I am facing an issue in the Balance Report for G/l Accounts using fs10n
    The Co Code is setup in Canada with the Co Code Currency being USD and hard Curency being CAD.
    The Account balance Display using FS10N is showing the balances in USD but not in CAD. When I check the Document Currency tab - the only options available are  "All Currencies " and  USD.
    Can anyone help me find out where the problem could be ?
    PS : I checked the Control data tab of the GL account. " Only balances in Local currency is unchecked "
    Regards

    Hi,
    While in the selection screen of FS10n, you have a field  currency type.
    Under that you have the list of currencies provided by SAP. Like company code currency and hard currency etc. Select hard currency (40).
    Assign points if reply to thanks.

  • Video white balance levels not showing, so video effects and color editing won't work

    I've watched white balance tutorials, and I tried clicking the dropper onto the viewer to change the color. But, in the gray box above it there are normally red green and blue lines, but I have nothing there. I think this is preventing any edits to my color balance, can anyone help?

    Well, no offense, but you seriously should read the C4D help. That's normal specular shading behavior and it is uniform acroos the plane because you obviously haven't defined any scene lights and use the default viewport light. Read up on how to create materials and adjust there properties and then learn the fine art of scene lighting as well as how to use object buffers to isolate objects with multipass renders.
    Mylenium

  • Set up Match and now redeemed account balance will not show up

    I bought, installed and set up match to synch in the icloud.  As soon as match was finished doing it's thing my redeemed itunes gift card balance disappeared from my account disabling my ability to purchase anything - it keeps prompting for a credit card.  I had a balance prior to install of match.  Anyone else seen this problem?

    The gift card balance was probably used to pay for iTunes Match, which is possible. Since iTunes Match is a subscription service your account also needs a permanent form of payment, in the form of a credit/debit card, associated with it.
    http://support.apple.com/kb/HT4914

Maybe you are looking for

  • App Store and ITunes have been disabled and it won't allow me to enable it again? How can I get it back ?

    I've tried resetting privacy settings, home screen, restarting iPad and even went to settings to enable all apps but the iTunes and apps icons are greyed out and cannot be changed! I tried disabling the settings but it still is grayed out and will no

  • HT5958 Final cut Pro x and libraries

    i cant seem to open a library on my external hard drive. its an airport time capsule . but i didnt use it to back up my mac, just to copy files. its says use a local volume or san? if i need a new external hard drive wich format would i need ?

  • Question about Error Statistics

    Hello, Just want to ask question, what cause of  Recieve Ignored packets and Throttles in Cisco Aironet 1310G  with System                                       Software Version:12.4(21a)JA, it increments the number very fast. Thanks you

  • Can DEV & QA be in single WAS instance ?

    Is it possible to have DEV & QA in single WAS 640 instance.

  • Big shock from iphone 4s charging

    Hello guys, Since some years i get tiny electric shocks from macbook pro and iphone. Well today was something hard. i pluged my iphone 4s on my home computer. i noticed i received some tiny shocks again, but since today is very hot i take out my shoe