S_ALR_87012165 not showing line items
hi
i am using the report vendor balances and line items with t-code S_ALR_87012165. it is not displaying the line items in production but the same is giving correct in development server.
I am looking for some settings by which i can see the favorable results.
Thanks
Hi,
In the report S_ALR_87012165 there is a output control field, which controls the display results.
In that haave you checked the Display line items.
Kindly revert back if you are facing some other issues.
thanks and regards
Praveen.J
Similar Messages
-
S_ALR_87013543 report not showing line item correctly
Hi all,
The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
regards
ShivHi Preeti,
Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP.
Screenshot of report attached,.
when i checked the drill down report for line item it says no line item found.
Any idea what went wrong
Regards
shiv -
FS10N GL Balances not showing line item details
Hi Expert,
i am unable to see the posted document in FS10N. i ve check the Button in FS00 Line Item display.. and save it.
again i did but FS10N display line item not showing .. see the error message below.
No items selected (see long text)
Message no. MSITEM033
Diagnosis
No line items meeting your selection criteria could be read. This could be for the following reasons:
1. No corresponding items have been posted.2. You are not authorized to display this data.3. The items have already been archived.4. Migration from classic General Ledger Accounting to new General Ledger Accounting: In migration phase 1, postings are only made to the account for the non-leading ledgerBig hello for you too my friend My 2 babies are taking all my attention! I am missing my old times here!
See, you have to understand when you have posted your GL account in 2013 you had only balance information stored. It means you have no data stored in table BSIS. When you activated Line item display this issue stands.
You won´t create entries in BSIS if you check that flag. Thus you only will have items from now on.
Have a test. Post new entries and check. they will appear.
Check also
LINEITEMS MISSING IN FBL3N AND FS10N
Best Regards! -
Posted Accounting documents not showing line items
Hi!
I facing a problem that has been created during the posting of accounting documents.
The Problem:
A Number of accounting documents were posted but there are no entries for them in BSIS, where as the header exists in BKPF and the detail exists in BSEG. So although it is showing the document as posted. It is not reporting it against the relevant G/L Account. Since cheques have already been issued against these documents, we are trying to avoid a reversal of these documents.
Our Analysis of the problem
We think that the problem has arose due to an error in the master data of G/L Account.
Some new G/L Accounts were created and the person creating it forgot to check the 'Line Item Display' Check in fs00->Control Data Tab.
New Documents were meanwhile created with line items using these G/L Accounts and were then posted.
When the mistake was realized the 'Line item Display' was checked for these Accounts. This however occured after the documents were posted.Ashan,
1) entries come only in BSIS/BSAS when Field "Indicator: Open Item Management" = X (SKB1-XOPVW)
2) For line item display, the system stores an entry per line item in an index table which contains the link between line item and account.
-> I think you've to run a "correction-program" but
plz only in agreement with SAP (OSS)
Andreas -
What are criteria of F-44 to show line item or not show?
Hello all,
I had reversed mm doc (from migo) with mr8m then I used f-44 for clear vendor account.
The fi doc that occured had no line item, please tell me how to know what criteria of situation that show or not show line item in fi document.
Thanks for advance,
FonHi,
I have the similar case but opposite of that. When I use F-44 to clear vendor line items, it generates line itmes but I dont want system to generate it.
Kindly let me know the setting or criteria for the same.
Regards,
Niraj -
Sap standard report for showing line items of any GL with its offsettinga/c
Dear all,
Is there any standard report in SAP to show line items of GL with its offsetting accounts. in short i want to see all journal entries of one specific GL account.could any of you help me in this?
points will be rewarded for the relevant answer.
thanks,
hemanthHi Dave,
I have gone through the note 112312.But there it is mentioned that it relates to 4.6x versions.We are in ECC 6.0.and we have not implemented new GL accounting concept.Is there any other alternative functionality or any other OSS note which meets my requirements.Can you please suggest me on this ?
Thanks,
Hemanth -
"ADF Navigation List" does not shows all items that are in table
Hi
Thank you for reading my post
I am tring to use "ADF Navigation List" , (it can be draged from data control platte into a form)
but when i drag and drop it on my form it does not shows all items that are available in my table ?
it just shows 10 item when i have 60 record in my Table.
ThanksHi,
in the pageDef ile, select the iterator for this list and set the fetch size to -1 (its 10 by default)
Frank -
Site Window does not show any item
Hi,
My site window does not show any items/folders to modify after I open my site. I was wondering if there is anyone who can point out what I did wrong. Usually the site window shows all the contents as soon as the site is opened. Please help. Thank you.
coskinasIf you look inside the webcontent folder, in Finder view (or Explorer???? if you're using Windows) - anyway, are there in fact files in there?
Try Site > Update > Refresh all.
If that doesn't work, try making a new site from existing content, which should give you a new site file (call it something slightly different) sitting beside your old one. I'm guessing here, but it can't hurt. -
Cheque printed but fi document not created (line item shows as open item)
Hi,
Problem Description :
F110
In payment run Posting order is not matching it shows 11 generated and 10 completed .
Due to this, document number 5100316279( i.e open item) was not cleared but generated a cheque 809635 for 58.75
The same document number 5100316279got cleared on 01.07.2008 ; payment run and generated another cheque 809643 for same amount 58.75
To summarize due to a system error we ended in a double payment to the vendor.
Request you help us to solve this issue.
Thanks.Hi,
The reason why you have more documents generated than completed is that update terminations on the executing the payment run.It means some documents were not posted in the data base. You could find the terminated update via using SM13.
Here is some information saying what you have to do when this happens:
You need to analyse the update record data to decide what has to be done with the update records. In order to analyse the record data, use transaction SM13 for terminated updates. By double-clicking on the terminated update records, the updates modules are displayed. By double-clicking on the function module 'POST_DOCUMENT' with error status you can see in whick line item the clearing has failed. Please use
'Goto => Display data'. In table T_BKPF and T_BSEG are the data of the entered document. Important are CPU-Date (T_BKPF-CPUDT) and Time (T_BKPF-CPUTM). In table T_AUSZ1 is the the information which line item
(BELNR, BUKRS, GJAHR, BUZEI) should be cleared with this update record.
Afterwards, execute FB03 for this document and determine the clearing document BSEG-AUGBL for this line item. Analysing this clearing document with data of the terminated update records you have to decide what has to be done with this update record.
For repeating the update task it is necessary that the clearing of the Open item is reset with transaction FBRA. Without resetting the other Clearing you will always get error F1 805 in the function module 'POST_DOCUMENT'.
So can you please analyse the data concerning the update termination. Depending on the investigation, you have to decide, whether the data has to be re-entered or whether the update task can be deleted or whether the clearing has to be reset and the task has to be repeated.
With regards,
V.Krishnamoorthy -
Is it possible to show individual billing documents (or even sales order documents) in KE30 as a drill-down option? If not, is there any report similar to KE24 that is able to show computed fields? Thanks!
Hi
Execute the report in KE30, after execution click on GOTO----
> Line Items..
you will find the same result like KE24.
Regards
MuR!!! -
How to update PO Price only for a single line item and not other Line Item
Hi
My requirement is not to update Price of PO from PIR if the Final Invoice Indiactor is not set and it is not a return PO. I am trying to do this using
BAPI_PO_CHANGE to update price automatically from Pricing record using
POITEM-PO_ITEM = '00001'
POITEM-CALCTYPE = 'B'.
POITEMX-PO_ITEM = '00001'
POITEMX-CALCTYPE = 'X'.
The price gets updated for the line item 1 as well as other line item which I do not want. Please can you tell how to restrict that.
Is it possible to restrict through configuration if this indicator is set there should be no price update. I tried to check in ME22n and if I update the condition item by pressing the update button the other item price also gets updated.
Thanks
ArghadipTimestamp is date and time together in one field..
Search for data element TIMESTAMP.
If you are getting this in your table.
If you are getting time and date in different fields then you can use the function module
given below....
CALL FUNCTION 'DELTA_TIME_DAY_HOUR'
EXPORTING
t1 =
t2 =
d1 =
d2 =
IMPORTING
MINUTES =
Then you can convert minutes into seconds..
Function module credit to BrightSide it works....but only it will give difference in minutes
Regards,
Lalit Mohan Gupta. -
Items to display in list view web part not showing the items setup
Hi, I have the following issue. I have a list view web part, but the web part is showing more items that the ones setup in the: Number of items to display in list view web part for this view.
It is because that works when using datasheet view and not a normal view? Is there any technical documentation from Microsoft supporting this?thank you for your answer. It is interesting that the mobile view with the items to show in the mobile view doesn't work in the webpart, but it works when you are using datasheet view, but if you uncheck to activate the mobile view, then, the webpart doesn't
show information, so, it works partially because one part works and not the other. -
Depreciation not displaying line items
hi all,
While running depreciation run in test mode no line items are displayed and no errors are there if we see error log what could be the reason plz. tell me and in if run in real mode the values are posted but books are not updated plz. help mehi
please check whether you have run the correct period for the fiscal year. -
FS10N - Not displaying line items for Archiving document
Hi Experts,
When we are double clicking on the FS10N accont display balance report to get line item reprot, it is not displaying archived document data. We have also deleted secondary indexes for those archived document.
We are able to get same report while using FBL3N with Archive info structure loaded with data.
Please suggest how to do FS10N archive enabled?
Thanks,
SamirV.Hi Samir,
You should look at the following SAP notes and implement the corrections:
792515
776164
and 831568 (if you use business areas)
Regards,
Eli -
Fbl3n not showing "all item" for a perticular account
Hi.
I'm trying to display "all items" in fbl3n for a/c "Cenvat on Hold" . System shows listing of this account from a periticular posting date i.e. from Nov 2009 and not before that. I was checking the entries thru fb03 which surely displays for posting date before nov 09. I also checked other account "Cenvat CapBED" etc in the same document which the system shows in fbl3n.
I also tried in fs10n, it is not showing . Pl suggest any clues.
Regards,
AKDear,
Use transaction FS00 and enter GL account and go under Information (CoCd). Here click on the Change Document then click on All changes and see the change made, if any....
Regards,
Chintan Joshi
Maybe you are looking for
-
I have a macbook 3,1 10.6.8 and i dont know how i can upgrade it to 10.7.4 2 GHz Intel core 2 duo 4GB 667MHZ DDR2 SDRAM
-
My TomTom device requires updating using 'Mydrive'. This used to work in Firefox but does not now. It will work if loaded through Internet explorer
-
previous editor made i t very easy for clients to create links in text that opened in new windows rather than existing window. I consider this a basic tool. Can it be re-incorporated ASAP.
-
I have a problem in our company network, whenever I connect to the WLAN with my MacBookPro, OS X 10.4.10 with WPA2 Personal it works fine for the first time, however when my MacBook goes to sleep or standby and I try to reconnect, the finder crashes
-
Well, Nokia Messaging is acting up again. Was able to send email all day, but nothing was being received until the last 30 minutes. I have about had it with Nokia and messaging. This is just pitiful. I've only had the E71 for about 6 months and I