S_ALR_87012178 - Aging Report
Hi Guys,
We are trying to use S_ALR_87012178 transaction to get the Aging customer report, I mean, customer open item analysis by Balance of overdue Item, but this report is not so friendly for the users.
Does anyone know if there is a way to change this report? I mean, a column with client, and the documents that are with the overdue item more than 30/90
Hi,
Check the following in selection screen
output control ->
Due Date Sorted List
In the 'Due Date Sorted List', you can specify 5 values
For example:
The default values are:
BLANK (i.e. zero), 30, 60, BLANK, BLANK
This gives a list of:
to 0 days, 1 to 30 days, 31 to 60 days, > 60 days
The 'to 0 days' bucket is always included.
If you specified:
29, 59, 89, BLANK, BLANK
This gives a list of:
to 29 days, 30 to 59 days, 60 to 89 days, > 89 days
Let me know if this information helps.
Kind Regards
Soumya
Similar Messages
-
Customer Open Balance Aging Report S_ALR_87012178
hello,
we are using this report Customer Open Balance Aging Report S_ALR_87012178 but when run, it brings customers' names from VD03 search field, instead it would be handy to see full names from Name-field. I understand S_ALR_87012178 is a static report, but my question would be is there any other transaction/report which shows the same but with customers' full name?
thanks in advanceS_ALR_87012178 is the only standard customer aging report.
Following two solutions I could think of to fit your requirements.
Develop a custom report by copying standard customer reports that have full customer name and make changes according to your need.
Or
In report S_ALR_87012178 the customer name is populated in Address field. So you can use this field as your customer name and develop a custom report.
Thanks -
Hi All
i am trying to get a legitimate vendor Aging report from within SAP
The 2 reports that I am currently looking at are:
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_ALR_87012084 - Open Items - Vendor Due Date Forecast
But both these do not bring out the output the way i want it - and i tried changing the output control and it still doesnt bring out the report as i want it - I want a report like the S_ALR_87012178 for customers, with output control 1, 6 and a 0 - which gives me a logical list of the aged customers.
Is there one like this for vendors too? Any suggestions?
Thank you
RukshanaHi Ruksaana,
You can customize the vendor report to show the items overdue per vendor by using the following steps
1. Create a form using T Code - FKI4
In this form ( two-axis structure) provide the details for each column as per your Client requirement - Due from 0 - 30 days
etc. You can create a column (using formula method) at the end by adding the previous columns, this will give you total
amount of overdue items for each vendor
2. Create a report using T Code - FKI1
Based on the Form created in the above step. Make additional selections based on client requirements like document type,
company code, account type, currency etc. Execute the report.
The following link will give provides detail steps for the creation of the aforementioned form and report.
Re: AR aging report (summary by customer)
Hope this helps.
- Sadha. -
Need standrad program for vendor aging report
Hi
Need standrad program for vendor aging report.
Please reply me only standrad programs.
Point are sure.
Regards,
kumarHi Pankaj
sorry to say that this is not my required program.
I need vendor aging report like s_alr_87012178 tc leads to customer aging report.
Thanks for your effort.
points are awarded.
Regards,
kumar -
Ageing Report on posting date and due date
Hi
I want to get customer ageing report on the basis of posting date (bill date) as well as due date (30days after posting date).
Please let me know how to get two reports.Hi,
check with this reports.
s_alr_87012178 and s_alr_87012168
regards,
Radhika. -
Customer & Vendor Ageing Reports
Hi
Can you please tell how can i get vendor and customer ageing report, Ex.Open items from 10-20,21-30,31-40 so on...
where i can get the report?
Mammu.Hi,
Customer aging report -
S_ALR_87012168
S_ALR_87012176
S_ALR_87012197
S_ALR_87012178 (open item aging analysis)
vendor aging report -
S_ALR_87012085 - Vendor Payment History with OI Sorted List
S_ALR_87012078 - Due Date Analysis for Open Items
S_ALR_87012084 - Open Items - Vendor Due Date Forecast
hope this helps
regards,
radhika -
AR Aging Report aside from S_ALR_87012085
Hi Experts,
We are searching a Standard AR Aging Report that will show Aging by Document Date. And when we checked the S_ALR_87012085, it was aging by due date. The users want to be the same format as the AR Aging Report.
Thanks a lot!S_ALR_87012085 is for Vendor Payment History with OI sorted Items.
For Customer (AR) Aging report is S_ALR_87012178 by customer and S_ALR_87012168 by invoice
The aging report is based on Payment terms, Payment terms are assigned in customer master OBB8
In case no Z report or query is to be created for the same then twek the setting of payment terms.
Regards
Lavanya
Edited by: Lavi sam on Sep 2, 2011 12:19 AM -
T code for sales ageing report plant wise
Is there any standard report to sales ageing report plant wise & material wise. Pls guide me with the
Hi Amit,
based on your configuration, the following standard reports can be usefull
S_ALR_87012168- Due date analysis for open items
S_ALR_87012178-Customer open items analysis by balance of overdue items
S_ALR_87012174- List of customer open items
S_ALR_87012175-Open items customer due date forecast
Hope this helps
Thanks
Akash -
Vendor ageing report(urgent)
in vendor ageing report i am getting the data for the vendors with open item only means those vendors who have to pay depending on the parameter date which we r passing
in selection screen.
but i want all those records with cleared item also depending on that date.
means suppose there r 2 vendors
1.sanjeev-he has to pay 1000 but he has paid 500 and left
with 500 due.
2. amit -he has to pay 1000 and he had not paid anything till now.
so when i am executing my report it is showing only
sanjeev 500
amit 1000
but i need
sanjeev 1000
amit 1000
to be displayed but as sanjeev has already paid 500
so it is not showing the output as above.
so how it could be achievedhi sanjeev,
anver here.
do like this.
if has_paid < has_to_pay.
write has_to_pay.
endif.
rgds
anver -
Hi All,
I need to develop an Aging report for open invoice, there is no indication for open invoice or close invoice since we are using customise DS and DS from third party system. only one key flag we have is clearing date. so kindly let me know how to write the logic for this requirement.. can I use Customer exit for this? I have an Idea to do like
first logic is
*If Clearing date = blank than invoice is = open (by using of this logic we can get all open invoice).
second logic
total number of invoice = current date - document date.
but I do not know how to implement this logic in BEx hnece kinnly advice me whether this logic can be work or suggest with different solution ples..
Regards,hi,
You can check few default PO reports wid proper paramater in it
or
Can check table EKBE
or
Check PO history in the PO doc
Or
Check the ME80FN
Regards
Priyanka.P -
WIP : Work Order Aging report
Hello,
Is there any standard program given by Oracle on WIP as 'Work Order Aging report' ?
I guess not.
If its not, then is there any other program related to WIP Aging exists in Oracle?
Thanks in advance.Hi,
Can you please make Ship To also as Primary Business Purpose?
Regards
Raghavender K -
hi I am developing a aging report for which I am getting fields from the tables EKPO and EKKO based on
s_gjahr FOR bsid-gjahr OBLIGATORY. "Document Fiscal year
p_date TYPE vbak-aedat OBLIGATORY, "A/P Open items
p_bukrs TYPE t001-bukrs OBLIGATORY. "Company
s_ekorg FOR mepo1222-ekorg OBLIGATORY, "Purchasing Organization
s_ekgrp FOR mepo1222-ekgrp, "Purchasing group
s_zterm FOR bseg-zterm, "Terms
s_ebeln FOR bseg-ebeln, "Purchase order
s_hkont FOR bseg-hkont, "Reconciliation Account.
s_blart FOR invfo-blart OBLIGATORY, "Document type
s_date FOR bseg-zfbdt NO-DISPLAY.
SELECT * FROM ekko INTO TABLE tbl_ekko WHERE bukrs = p_bukrs
AND zterm IN s_zterm
AND ekorg IN s_ekorg
AND ekgrp IN s_ekgrp.
IF tbl_ekko[] IS NOT INITIAL.
SELECT * FROM ekpo INTO TABLE tbl_ekpo FOR ALL ENTRIES IN tbl_ekko
WHERE ebeln = tbl_ekko-ebeln
AND bukrs = p_bukrs
AND repos = 'X'
AND werks IN s_werks. "additonal.
ENDIF.
Now my problem is I need to combine the data I have selected from EKKO with a table which has EBELN, I found BSIK but that doesnt have the EBELN field filled.
Can you tell me some table other than BSEG ( performace issue ) which I can use to select my entries with Inner join... only BSIK has BLART not BSEG..
I will definitely award points for all the helpful answersHi
U need to read the EKBE table here you should fine the FI invoices linked to PO
Max -
This report has been extended from an existing query that has been posted on this forum.
This report is an aging report for ALL trasnactions, both open and closed.
Is it possible to modify this query to report on OPEN / unreconciled trasnactions only?
select T0.shortname,T2.cardcode 'Customer Code',T2.cardname 'Name',T2.U_BU, T2.U_DEPT, sysdeb 'Debit Amount',syscred 'Credit Amount',
case T0.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
T1.BaseRef'Trans #',
case T0.transtype
when '13' then
(Select Comments from OINV where OINV.Transid=T1.Transid)
else '-'
end 'Inv.Rem.',
(Select SeriesName From NNM1 Where Series=T1.DocSeries and ObjectCode=T0.TransType)'Series',
T0.Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), T0.refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), T0.duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), T0.taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 < 31
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "0-30 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 30
and (datediff(dd,T0.refdate,current_timestamp))+1< 61)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "31 to 60 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 60
and (datediff(dd,T0.refdate,current_timestamp))+1< 91)
then
case
when syscred <> 0 then syscred * - 1
else sysdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 > 90
then
case
when syscred= 0 then sysdeb
when sysdeb= 0 then syscred * - 1
end
end "90 + days"
from JDT1 T0
Inner Join OJDT T1 On T1.TransId=T0.TransId
left outer join
OCRD T2 ON T2.cardcode =T0.shortname where
T2.cardtype = 'c' and T0.intrnmatch = '0' and
T2.U_Bu = %0and T2.U_Dept = %1
ORDER BY T2.CARDCODE, T0.taxdate
Thanks in advanced LisaThanks for the feedback Jule - I have changed the query as is as below
Unfortunately, the query is still reporting ALL transactions not just unreconciled transations.
Would be grateful for any assistance.
Cheers Lisa
select T0.shortname,T2.cardcode 'Customer Code',T2.cardname 'Name',T2.U_BU, T2.U_DEPT, balscdeb 'Debit Amount',balsccred 'Credit Amount',
case T0.transtype
when '13' then 'INV'
when '14' then 'AR CN'
when '24' then 'INCOMING'
else 'Other'
end 'Type',
T1.BaseRef'Trans #',
case T0.transtype
when '13' then
(Select Comments from OINV where OINV.Transid=T1.Transid)
else '-'
end 'Inv.Rem.',
(Select SeriesName From NNM1 Where Series=T1.DocSeries and ObjectCode=T0.TransType)'Series',
T0.Ref1,
fccurrency 'BP Currency',
CONVERT(VARCHAR(10), T0.refdate, 103)'Posting Date' ,
CONVERT(VARCHAR(10), T0.duedate, 103) 'Due Date',
CONVERT(VARCHAR(10), T0.taxdate, 103) 'Doc Date' ,
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 < 31
then
case
when balsccred <> 0 then balsccred * - 1
else balscdeb
end
end "0-30 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 30
and (datediff(dd,T0.refdate,current_timestamp))+1< 61)
then
case
when balsccred <> 0 then balsccred * - 1
else balscdeb
end
end "31 to 60 days",
case when ((datediff(dd,T0.refdate,current_timestamp))+1 > 60
and (datediff(dd,T0.refdate,current_timestamp))+1< 91)
then
case
when balsccred <> 0 then balsccred * - 1
else balscdeb
end
end "61 to 90 days",
CASE
when (DATEDIFF(dd,T0.refdate,current_timestamp))+1 > 90
then
case
when balsccred= 0 then balscdeb
when balscdeb= 0 then balsccred * - 1
end
end "90 + days"
from JDT1 T0
Inner Join OJDT T1 On T1.TransId=T0.TransId
left outer join
OCRD T2 ON T2.cardcode =T0.shortname where
T2.cardtype = 'c' and
T2.U_Bu = [%0]and T2.U_Dept = [%1]
ORDER BY T2.CARDCODE, T0.taxdate -
Hi,
I'm new member of this forum. I have a questions.
I want to create a report that utilizes the functionality of GR/IR aging. I want to ask you, for those who ever build GR/IR aging report, what kind of field I can use to trigger the starting counter of GR/IR aging? like GR date maybe, and what kind of indicator I can use to stop the calculation of GR/IR aging, such as date of posting on BSEG may be (it just my opinion)...
Thank you.
Regards,
ArifHi,
I don't think it can be acheieved in std report, better use below tables as epr your logic to develop a Zreport.
EKKO
EKPO
EKBE
MSEG
MKPF
BSEG
BKPF
And also check the Logic of std reports MC50 , MC46 and MB5B -
Dunning Letter Design & Aging report
Hello Experts,
I have a few doubts in B1 Sales AR -> Dunning and Aging Reports.
1. How do we incorporate our own letter format for dunning letters? I looked for PLD's, but nothing was available in the print preview screen.
2. When we execute Customer Receivables Aging report, what is the significance of the column "Future Remit"? In our B1 instance, the receivables that are due 60 or 90 days from current date are not appearing in their respective columns.
Please advise on how to proceed
With Regards,
PS: We are running B1 2005-B / MS-SQL 2005Hi Kaatss,
You should be able to find the Dunning letter formats by clicking on the layout designer button and then from the windows selecting the dunning letter formats from the 'Choose Document Type'. They go by the ID of DUN0... DUN09.
As for the columns the 60 and 90 columns show the invoices (values) that are overdue by 60 and 90 days respectively.
The Future Remit column shows invoices that are still within the due date. So if you raise two invoice with 60 and 90 day payment terms, but they are still within their due date, their values will appear in the future remit column.
I hope this helps. I use 2005A so I hope there are no differences.
Damian
Maybe you are looking for
-
How to suppress blank lines in smartforms
Hi all, How can we suppress blank lines in smartforms? In my scenario I am having customer address details in main window. i.e. Name Street P O Box P O Box Location Post Code Telephone Fax. Suppose if there is
-
First, let me say that I know how crowd sourced location works on iPads with no GPS. But just how long does it take for location of the WIFI router to get updated when an iPhone is constantly connected to the WIFI?
-
Hello I made a k-children tree algorithm in Java. Now I'm looking for a ready-made API/classes for drawing the tree. Anyone knows any good tree drawing APIs? I searched google for hours and couldn't find anything. Thank you
-
Hi all, I wonder if anybody could help. I have just started using Nokia Mail on my 5230 and it seems to be working fine. However, I can't seem to find a way where I can log off afterwards and only get back in by putting in a password. If I exit it, t
-
I need to reconnect media when I use a notebook mackbook pro when I travel.
I am using FCP studio 2 using Mac OSX. and Used a LaCie RAID to store my video. I use a back up Tobshia hard drive that I would like to use when I travel with my MacBook Pro. But it seems that I have to reconnect the media even though I did not chang