S_ALR_87012178 does not show any data after upgrade from 4.6C to ECC6

Hi Gurus,
We do upgrade and do testing to all functional process realted.
When open S_ALR_87012178 in SAP ECC6 no data showed, but in old version (SAP 4.6C) data showed although we select the same parameter selection.
Any setting missed ? or any suggestion about this issue.
Thx in advance.
Tri Wicaksono

Hi Tri,
Check the following.
I have checked your request, and there are two 'ways' the report
will send out the data:
1. In a 'normal' list
If you call the report in the 'standard' way, the data get displayed
in a normal list. This is the standard.
2. If the 'ACCESSIBILITY_MODE' flag is set in the user parameters.
With this flag, the reports output is done with the ALV Grid display.
About this ACCESSIBILITY_MODE flag, refer to the note 929036,
which describes the 'function' of it.
Regards,
Fernando Evangelista

Similar Messages

R12 Invoice Concurrent LOV not showing any Invoice after upgrade from 11i

Hi All,
We had 11i instance and then we upgraded to 12i.
Now one seeded program named "Invoice Print Selected Invoices" has a parameter called "Transaction Number Low"
, having LOV AR_RAXINV_TRX_NUMBER ,
does not show any record in R12.
When i opened LOV i could see following tables:
1. RA_CUSTOMER_TRX
2. RA_CUST_TRX_TYPES
3.AR_LOOKUPS L1
We are using this value set for one of our custom object too.
I was wondering if it is not pulling any data for seeded how it could it pull for custom objects.
I am a newbie in R12.
Any one has any idea why is it so , i can speed up my work and learn from your experties.
Thanks,
Swapnesh Parmar

Hi
Did you get the above sorted ? how ?
I have a similar problem with Selected Invoice Print where the Transaction Type parameter lov doesn't show any values. The seeded value set uses ra_cust_trx_types which (in R12) is a synonym for ra_cust_trx_types_all.
There is data on ra_cust_trx_types_all.
Pam

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

MacBook Pro late 2013 does not show login window after waking from sleep

MacBook Pro late 2013 does not always prompt for login, but opens directly to desktop, even though security settings are setup to prompt for password after 5 minutes. Up to now, this only has happened on battery, machine goes to sleep or lid is closed, 10 minutes pass, lid is opened and desktop is shown instead of lock screen. Console shows, that the machine was actually sleeping (10 min no log entries) and also does not show any error in regards to login window.
This behaviour occurs randomly and I could not track down any root cause/behaviour, yet. Sometimes everything behaves as it should.
Any ideas?
Thanks
marcus

Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
sudo pmset -a autopoweroff 0
We'll see if it helps.
It happens toughly a couple of times a week.

Sharepoint web analytics does not show any data

Hello,
We installed Sharepoint Web Analytics some days ago (separated application pool).
Installation completed successfully.
Search works fine and returns expected results.
But reports still don't show any data :
Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
What I tried :
connect to website using different users (admin user included)
checked that needed services on server are started (especially analytics services)
restart services Web Analytics Data Processing Service and
Web Analytics Web Service
checked that all services applications are started (WSS_UsageApplication status was
stopped so I started it using Sharepoint 2010 Management Shell)
checked service application associations (especially if Analytics Service Application Proxy is checked)
manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
manual start of incremental crawling
restart IIS
checked scope of data logging (especially if Enable usage data collection and
Enable health data collection are checked)
checked that the .usage file are generated correctly on the disk
checked in the Logging database (WSS_UsageApplication) that the
RequestUsage view contains data collected from the .usage files
checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
checked on the website side that Advanced Web Analytics feature is
Active
recreate web analytics application
checked for any message in ULS logs that could help... I only noticed that error :
The SharePoint Health Analyzer detected an error. Drives are running out of free space. Available drive space is less than twice the value of physical memory. Can it cause the problem ?
All appears to work fine but I can't see any data in the reports.
The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
Anything else I can try ?
Thanks.

Yes I have granted application pool identity full control on the Web Analytics Service Application.
I also checked that Sharepoint 2010 timer service is started.
I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
regularly and seems to be an exception :
Enumerating all sites in SPWebApplication Name=SharePoint - 80.
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Maybe it can be the cause ?
I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space. Available drive space is less than twice the value of physical memory." does not appear anymore.

Edit/Display form does not show site columns after upgrade

https://social.technet.microsoft.com/forums/sharepoint/en-US/580111d4-72ca-4193-87ab-1dfd6082fa88/document-set-library-column-not-showing-up-on-edit-form
Hi all,
I don't think this is related to the above question, but the linked "solution" is as good as I can come up with, however it looks like its possible that ALL the libraries in the collection are suffering the same situation...
WHATS HAPPENING:
our site was migrated to 2013 from 2010 from 2007 and is running in compatability mode around 6-18 months ago. I'm pretty sure the old system is gone too - database backups might be obtainable... not sure.
There are a bunch of "site columns" that are used consistently across the collections libraries (there seems to be a general avoidance of "content types", don't ask me why, I don't know, I also don't know what would be involved in moving
them all to content types as many of the sites "views and webparts" use the content type columns to surface things all over the place, so I suspect it would be a big job), but folks have recently noticed that some documents are missing from various
pages (webparts that are gathering documents from these columns values).
But the problem is that it seems that since the update most (all?) of the document libraries NO LONGER enforce the requirement and litterally only show "name*", and "title" in display and edit properties...
Any ideas on how to get things back to showing the "proper" forms (I can only guess what this was from documentation and screenshots and general guessing based on the "commonness" of the columns in question)? Or is there a way to merge
or migrate "columns" to content types in some way that is either "collection wide" or non-breaking?
ANY assistance would be greatly appreciated!

So just to be sure are you saying that '2010 compatabilty mode' is causing these issues?
Just to be SUPER clear from my end this is what I'm seeing as an example;
For a collection
with site columns
many but not all lists
many but not all list items
--> are missing valid data in the site columns that have been registered for that list.
sample:
name          modified by    doctype     department
item1.docx   username   <blank> <blank>
item2.docx   username    WorkInstruction    Planning
if you click "edit properties" you are presented with ONLY the (I'm guessing) content types fields (eg: for Document you get Name and Title) and NONE of the other fields that should be specified.
However if you hit "save" you can see that the data in these fields returns to the "list view" (however it does not re-enable these fields from being active in the View/Edit properties pages).
Is this something that can be fixed? Or are you saying that we need to backup the DB and restore to a FULL version (not in compatability mode) of SharePoint2013? Or are you saying we need to revert to our PRE update backup and do something?
Its been many months since thsi upgrade was done and the system has changed a lot, so you can imagine we are reluctant to loose much of these changes...
Bazinga!

OS X Server Calendar Service not showing any events after upgrade

Hello,
I recently upgraded my Late 2012 Mac Mini Server that was running Mountain Lion and Server 3.2 to OS X Yosemite and Server 4.0. After the upgrade I got a lot of calls from users who state that all of their calendar items have been erased from their iPhones and iPads. I also noticed the same thing on my calendar. Does anyone know how I would restore those times? Has anyone noticed the same thing after an upgrade?
Thanks!

Correction... I am running Server 2.2.4.

Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination" the installation stalls and does not show any destination disks

I have a Power Mac G4, it has OS 9. Imam trying to upgrade to OS 10.2.3 (Jaguar). It is going smoothly until I get to the "Select Destination" screen. It stalls there and does not show any disks to choose from.
Any ideas?
Thanks. Abe Oliver

Hello Abe,
If it's a Digital Audio or earlier, you need to install a Firmware update first...
As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
http://support.apple.com/kb/HT1395?viewlocale=en_US
Power Mac G4
Firmware Update
Download Document No.
Power Mac G4 (Mirrored Drive Doors 2003)
no update needed
Power Mac G4 (FW 800)
no update needed
Power Mac G4 (Mirrored Drive Doors)
no update needed
Power Mac G4 (QuickSilver 2002)
no update needed
Power Mac G4 (QuickSilver)
no update needed
Power Mac G4 (Digital Audio)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (Gigabit Ethernet)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (AGP Graphics)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (PCI Graphics)
no update needed
Power Mac G4 Cube
Power Mac G4 Cube Firmware Update 4.1.9
75129

I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information

I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone" in the centre".

I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

How do i update 10.5.8 if my macbook does not show any software updates?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Tables & Index not showing any data

Hi All,
I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
db02>history>tables& index not showing any data
Regrads,
Mnai

Please make sure RSCOL00 running or execute it manually.
Did you try to run the stats in DB13 ?

IPhoto does not see any changes after editing a photo in Camera Raw

Hello everyone ,
I have some small problem with my iPhoto. I have set up Camer Raw in iPhoto as External Editor, so when I click on edit in IPhoto,
automatically opens my JPG in Camera Raw. After editing in Camera Raw I'm clicking on ,,Save image" then destination is ,,Save in same location" When I go back to iPhoto to the same photo, iPhoto does not show any changes I have made in Camera Raw.
What could it be or should I set something in iPhoto or in Camera Raw?
Is there a chance in order to deal with this?
I will be grateful for any assistance and
I'm waiting for advice
Dawid

Any time a RAW file is edited in any 3rd party editor from within iPhoto it MUST be saved to the Desktop and imported as a new file. There's no other way to do it. So the photos you've edited and saved are somewhere in the iPhoto Library folder system but cannot be recognized and used by iPhoto.
The following is geared for Photoshop and Photoshop Elements but might have some info relevant for you:
Using Photoshop CS3 or Photoshop Elements 9 as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
s I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
OT

IPhoto 9 does not show any photo of old Mac Mini's iPhoto 7 library

I'm trying to migrate an 80GB iPhoto library from my old Mac Mini to a new iMac. The old Mac Mini has iPhoto version 7. The new iMac iPhoto 9.
When I copied the complete library, iPhoto does not show any photos. How can I fix this? I already tried:
Using iPhoto Library Upgrader – however it shows: Your library can open with the current version of iPhoto and does not need to be prepared with this tool.
Using iPhoto's rebuilding etc functions on both Macs – this does not do the trick
Using iPhoto Library Manager – also shows 0 photo and rebuilding does not work.
Anybody knows a solution?
Thanks!

Doesn't work :
It is also quite strange that iPhoto just opens the library without any warnings, but without showing any of the content (photos, albums, etc.)

S_ALR_87012178 does not show any data after upgrade from 4.6C to ECC6

Similar Messages

Maybe you are looking for