S_ALR_87012357 Business Partner Name field is blank

Dear All
While running this report i am getting values and tax related details correctly. In customer and vendor field i am getting their number. But i am not getting description of the same.i.e the field business partner is blank.
Kindly guide me to get data for that field.
Thanks
Shobana

Dear Shobana,
            how to get customer and vendor fields in report S_ALR_87012357 .
While running this report i am not getting customer and vendor fields iself.
Kindly guide me to get data for that field.
Thanks
Shobana

Similar Messages

  • No Business Partner name in the general note of a DSWP-issue

    End user has been created within a CUA-sytem and distributed to the SSM-system. Subsequently the Business Partner BP has been generated in the SSM-system succesfully with the tcode bp_gen. The BP has been attached in the organization model succesfully using tcode pposa_crm. However, the Holder name does not appear at the left lower Holder column. After some investigation it appears that the fields HRP1000-SHORT and HRP1000-STEXT of the Central Person are not filled. Hence, no Business Partner name appears in the general note of DSWP-issue and therefore different to trace who has done what.  What can be the cause of this issue?

    Just for the record...
    It appears that in some cases the Title-field was not filled in the CUA-system. Therefore this field was not transferred to the SAP Solution Manager system. The problem has been solved by entering a value in the 'Title'-field of the Business Partner [/nbp] - the Holder name in the organisational unit appears again.

  • Business Partner Names

    Good day! Is there a way to use the Business Partners Names as parameter fields? Like when you want to search data about a certain business partner, you'll just type in his/her name to gather the data. I was only able to do that using BP Codes.
    Thank you.

    Hi
    If your business partner name is part of your database field data then you can very well create a prarameter and define default values of your Business Partners.
    Also you need to filter the data through Record Selection to get Business Partner wise data.
    Thanks,
    Sastry

  • How to adde New Language field value in CRM Business Partner Language Field

    Dear all,
    How can we add a new field value to the Business Partner Language field in CRM and ECC systems.
    Your suggestions will be highly appreciated
    Thanks
    Sravanthi

    Hi Shravanthi,
    You would need to add the new language to table T002. Once this is done, it will appear in the drop down menus.
    Regards,
    Rishu.

  • MASS change of the business partner name

    Hi All,
    I have an immediate requirement to do a mass change of the business partner names.  I used the Tcode MASS but not sure of the procedure. Can anyone kindly guide me how to go about processing the mass change?
    Thanks,
    Venkat.

    Hello Venkat,
    Have a look at SAP Note 802804. This should help.

  • How to get business partner name from sap user

    Hello,
    We want to get in the code the business partner name from sap user.
    What function modules should we use to perform it?
    Thanks in advance,
    Sergey

    HI,
    You can use the FM:CRM_CENTRALPERSON_GET
    pass the input parameter IV_USERNAME as the user name
    You can get the result in the export parameter EV_NAME as user's first name last name
    regards,
    PP

  • Problem with display of Chinese, Japanese, and Korean business partner name

    Hi All,
    I'm trying to understand how to get GTS to properly display the names of the business partners that are in Chinese, Japanese, or Korean.
    I have set my SAP gui localization as follows:
    - Select the Customize Local Layout, then Options, then the |18N tab,
    and check the Activate Multibyte Function box
    - Select the Customize Local Layout, then Character Set and check
    Unicode and Simplified Chinese
    In the source R/3 system for these partners, if I set my localization to the right language, the business partner's name and address would be displayed correctly in the C/J/K character sets when I select the appropriate version in International Version of the address.
    However, in GTS these names/addresses would just appear as nonsensical characters (like "·ÉÀûÆÖÕÕÃ÷µç×Ó£¨ÉϺ££©ÓÐÏÞ¹«Ë¾").
    For example, if I do a look up of a known Chinese BP by number, in the seach results window the Description field of that BP would just be garbage, but if I put the cursor over the Description field, then the correct Chinese display (matching what is in R/3) would appear for as long as the cursor is over that field. This indicates that the data was transferred correctly from R/3 to GTS, but some how the display does not default to the right character set.
    If I select that record, the resulting detailed display would also have garbage as the Name and Address. However, here putting the cursor over the fields still do not bring up the correct character displays, and I have found no way to get the correct displays to appear.
    Does any one know of a way to get the displays to show correctly in GTS?
    And can anyone explain why putting the cursor over the Description (in the BP search results window) would let the correct display pop up?
    Greatly appreciate any insight anyone can provide.
    Thanks,
    Rex

    Hi Rex - As per message - this looks to be an issue for BC-I18-UNI and not the GTS application:
    For general information purposes - last response from BC-I18-UNI development via oss message:
    "However, from readind the message, I believe I understood the reason for
    the described effect. I assume GGT is a non-Unicode system? If yes, this
    is my idea:
    The data stored in the BP tables, e.g. for number 2555442 have been
    entred manually, probably within a session using English as logon
    language. In this case the data are stored with a Latin-1 codepage. This
    means the stored data are actually Latin-1 data, not Chinese. By
    switching the font at front-end side to Chinese, the characters appear
    as correct Chinese, although they are still Latin-1.
    It is possible that different GUI components show different effects in
    this context, as the internal font switching mechanisms behave a bit
    different in different components, e.g. control based components are
    different from normal Dynpro-based fields.
    To have correct Chinese data, you need to logon with language Chinese.
    This holds for all non-Unicode systems. On Unicode systems, the logon
    language is arbitrary."

  • Layout EL 31 : i  need to add the business partner name

    Dear Experts ,
    I need to change the layout for all users by adding the field "business partner".
    I can't change and deflag the field "user specific" when i'm saving the variant and the goal is to flagg only the "default setting".
    Thanks in advance for your help

    Dear experts,
    I'm dealing with the note 526696 and i have some questions :
    - where i can found the switch ISU_LOC_CI_EHP5?
    - where i can found the business function  ISU_LOC_CI_2?
    I need these infromation for the table TE410S because nothing concerning the field EL31_DEFAULT_LAY is stored.
    Best regards,

  • Moving information from last name field into blank first name field?

    Is there a script (or does anyone know how I can make a workflow in Automator) for moving information from the last name field in Addressbook to the first name field (which is currently blank)? I want to move information from the last name field to the first name field in over 500 addressbook entries, and it would take me all night to do it manually.

    Dear Michael,
    the scenario is like we r implememting portal all our customers around 2000 .
    so we cannt expect them to remember the same spellins as what we gave.
    no one else can change other password as it need to give the id and email correctly
    i have checked it in logon par file.......
    the java files r not included in it..... to modify and deploy it again....
    do u have any idea where we can change it other than java files or how to get this source files

  • Business Partner Name missing from ACH Payment File

    We are trying to send a payment on a loan to a business partner via an ACH file.  When the file is created, the payee name is missing from the ACH File.  It runs perfectly in our developement client, but not in production.  I can not seem to find any differences between the the two clients.  Can someone point me in a direction that I can look to get the Payee into the ACH File?

    Hello Wayne,
    What type of payment files do you use and for which country?
    Regards,
    Endre

  • Business Partner Custome Fields Mandatory

    Hi,
    I have added some custome felds to the manage business partner. I want some of the custome fields to be mandatory.
    Can anybody tell how to do it?
    Regards,
    Raveendra

    Hi
    Please paste what code you have made here in your reply.
    <b>Meanwhile, go through the following links -></b>
    Re: Vendor Master Extension in SRM
    Re: F4 for customer table fields
    Re: Add custom fields to Contract Transaction in SRM 4.0
    <u>Other realted Information -></u>
    It is possible to add custom fields / structure to the Business partner screen.
    It is required that you create a custom screen (sub-screen) and perform the assignments in the BDT. Go to area menu BUPT. You can see sub-menu Screen Layout. Check the customizing using transactions BUS2 to BUS5.
    You can add custom fields, custom screens and assign custom PBO and PAI function modules. You can have a look at how the existing screens are made and accordingly copy / configure your custom screen and fields. Enhancement through BUPT will work. Just ensure that the field group which you add for that there is a flag 'TABLE CONTROL' in transaction BUS2 which has to be set.
    Hope this will help.
    Regards
    - Atul

  • Business Partner Reference Field in FB60

    Hi All
    I am unable to see the Ref1, Ref2 & Ref3 fields in the details tab while entering vendor invoice in FB60. I have checked the FSG of the posting key and GL Account and the Vendor Account group.
    Any one who has resolved a similar issue could please guide me
    Thanks in Advance
    KIM.

    Hi KIM,
    Refer to the link below:-
    FB60 Grid
    Regards,
    SAPFICO

  • Not all fields for Business partner are exported

    Hello,
    I am exporting Business partner data from CRM to another system, through XIF. I get on target system XML file with Business partner data. But I have only standart fields. I can't get fields, which was created my company for own use.
    For example, for Business partner I have Business Agreement, but after export to XML, I have no Business agreement data in another system. But I have standart data, for example, Business partner Name, ID, ets.
    Anybody know what I can do to export all the fields for Business partner? Some transaction or somthing else? Where can I customize output XML with Business partner data?
    Best regarda,
    Alexander.

    Hi,
    You have the right observation. There is no mandatory fields for BP. It means you can update any single field against CardCode. CardCode is the only mandatory field which is the only primary key must be unique.
    Thanks,
    Gordon

  • Task Name Field, "Blank" ("") in 2007, "Empty" (Empty) in 2010, HOW TO FILD/FILTER for empty?

    In MS Project 2007, I can use VBA code in Excel and determine if the selected task “Name” field is blanks by using the code “pj.Activecell.text <> “”.
    In MS Project 2010, blank name cells are no longer “” (or blank), they are “Empty”. How do users filter for a non-standard value of “empty” then the text of “empty” is not in the task “Name” cell?

    Hi Dan,
    Since I almost know nothing about VBA and I can only read but not write code, I'll let John or Rod (VBA kings on this forum) jump in.
    But here is what I go recording the macro:
    Sub Macro1()
    SetAutoFilter FieldName:="Name", FilterType:=pjAutoFilterIn, Criteria1:=""
    End Sub
    Also ensure to have the latest version of Project 2010 since I noticed different behaviour with blank lines with 2 different versions.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Business Partner Field Grouping Config for BBPMAININT transaction

    Hi,
    Vendor from ECC (6.0) are replicated to SRM (5.0) via the standard vendor replication program BBP_VENDOR_SYNC.  In SRM, I want to hide/suppress some fields (ie: tax numbers) on the business partner transactions BBPMAININT and BP.  I tried to acheive this via Business Partner Field Grouping config, and it works for BP transaction but it does not work for BBPMAININT transaction.
    Does anyone know how to hide/suppress fields for BBPMAININT transaction?
    Reference to Field Grouping config:
    SPRO -> Cross-application oomponents -> SAP Business Partner -> Business Partner -> Basic Settings -> Field Groupings -> Configure Field Attribute per Client
    Thanks,
    Susan Wang

    Hi,
    See the foll threads for more pointers:
    Vendor Master Extension in SRM
    Business Partner Custome Fields Mandatory
    BR,
    Disha.
    Do reward points for useful answers.

Maybe you are looking for