S_ALR_87012357 update document, what filed ?

Hello All ,
When we run the VAT reprot S_ALR_87012357 with Update document selected, what is the filed / table that are impacted with this option ?
Is there a way to see all documents 'updated' by the VAT report and where is this flag ?
Thank you all

Hello,
After some tests I found the fields I was looking for,
So once document updated , the VAT line item in BSET Table is updated via 2 Fields :
STMDT : TAX return on
STMTI : TAX return on
Thank you all for your time
Tamim

Similar Messages

Downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?

downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?

Mavericks is not recognizing the .smi extension - on my Mac it thinks it's a RealPlayer document. You are not going to be able to do anything with this - it requires AppleWorks to be present to be updated, and you can't run AppleWorks on Mavericks (other than by the rather roundabout process of installing Snow Leopard Server in Parallels and installing AppleWorks on that, as described here).

Hard drive is full software cannot get updated! what should I do?

Hard drive is full software cannot get updated! what should I do?

Here are some general tips to keep your Mac's hard drive trim and slim as possible
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
To find other large files, download an app called Omni Disk Sweeper.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

S_ALR_80712357 'update document,update run'

Dear friends,
We are testing the report S_ALR_87012357, Advanced VAT return report. Accidentally we realized if we select the option 'update document, update run' but forgot to select 'batchinput session required', the report will marke the tax items and save them in table BSET, but no posting will be generated. I understand this is a mistake of user, however, I will be interested to know if SAP provides any program which can fix these incorrectly processed items, e.g. post the taxes to the vat payable account by using a special program. Or, is this a system limitation, say, user will have to run the program correctly with the respective options selected. I can not access OSS, so I am not sure if there's any OSS related to this.
Is there anyone who can help?
Thanks.

Hello,
After some tests I found the fields I was looking for,
So once document updated , the VAT line item in BSET Table is updated via 2 Fields :
STMDT : TAX return on
STMTI : TAX return on
Thank you all for your time
Tamim

Update Document Flow - delivery -- bill

Hi Experts,
I want to "deactivate" update document flow between delivery and bill for an item category (say e.g. ZTAN). Where can I do that?
In other words in table VBFA when I put "Follow on" document as my invoice #, I do not want to see my delivery # as preceeding document.
I have checked VTFL, at item category level, there is NO field as "Update document flow"
also I have checked VTFA, at item category level, there is NO field as "Update document flow"
(in VTAA and VTLA, at item category level, there is field as "Update document flow" - but this is not my query)
Please help
Typewriter

Hi,
I donot understand your post. What shall I accomplish with your suggestion? For my better understanding, please elaborate.
In VTFL, at item category level, Copy requirement is to check if all the criteria are met, if yes, then copying information is done from Delivery to Invoice. I think, this has nothing to do with populating information in document flow.
Could you please advice, where exactly is the configuration for "Update doc flow" in VTFL and VTFA?

Force "Update document rows according to neu BP'sData"

How can I run the command "Update document rows according to neu BP'sData" over my AddOn.
This command start automatically when GPCode change in the sales document for example.
thanks,
Marcelo

Hi,
There is no function that you can force the updating of the rows in your addon.
what you can do is to simulate how SAP B1 do the updating of the row.
You can Pop a messagebox to ask if they want to update the rows if they change the business partners.
If they select Yes then
Get the PriceList that the Business Partner is using then Parse the Rows And find the Price for that item in the Price List and update the Price Column.
else
Do nothing..
Thanks and regards,
Wilson

HT4623 I'm trying to upgrade an ipad and in the system under general there is no software update. What do I do?

I'm trying to upgrade an ipad and in the system under general there is no software update. What do I do?

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
With iOS 6 you will lose the built-in YouTube app and the Maps app will change

HT4623 Hi, every body please help trying to update my I pad with new iOS but there is no soft wear update tab what I am doing wrong

Hi,
all trying to update my iPad with new iOS but when in the settings tab there is no software update tab
What I am doing wrong please or i,m going to throw it

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes as described half-way down the page that you posted from.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
A first gen iPad will be updated to iOS 5.1.1, and an iPad 2 and 3 to iOS 6.1.3

Fail Updating Document Using DI API in Form_Data_Update_Event

Hi,
B1 2007B PL14
I have problem updating document using DI API in Form_data_Update_Event.
I have made sure that beforeaction=false and actionsuccess=true (to me, this means that B1 has completed the update process), then my codes will be executed to update the same document using DI.
However, I notice that when my codes is executed, the document form is still in "Update" mode, that this results in the system returning error message "another user-modified table (odbc-2039)
Any suggestions?

Hi Shahid,
I am not sure what your question is. The code you pasted looks like the MatrixAndDataSources example that comes with the SDK. What are you trying to do?
Thanks,
Adele

Approval templates don't fire when updating document

I'm running trials in my test database and it appears that approval templates only work on new added documents? SAP Business One version 8.82 I am testing a query that calculates certain criteria against the business partner's credit limit. If there is a deviation I want the approval process to start.
Everything works fine when I add a new sales order with a doctotal that deviates from my credit limit logic. Approvals fire off and the user has to wait for the manager to approve. However if I add a sales order with zero value and then go back in and update the pricing later the approval never triggers. So users are just able to go around approvals by adding blank documents first and then updating them however they see fit.
Am I doing something wrong or is this just how SAP B1 approvals function? Do approval templates have any impact on updated documents?

Do TN's throw the red bar erros at the bottom of the client's GUI? The ones that look like this...
I'm looking through the following documentation...
http://scn.sap.com/docs/DOC-7034
and I can't seem to confirm what returning @error = 1 will actually cause.

Express Update Document in Billing

Dear All,
While saving billing document, system is giving a message, Epress Update Document.
Can anybody tell me what is the table do i need to update ?
Rgds,

Hi,
The reason may be more than one for which you get the update termaination. Eg:
- The printer you have selected is not active
- Print program is not working properly
- Some user exit not working as designed etc...
There are a few ways you can find it out....
a. Go to ST22 and check for the dump that has occured in your ID for that particular day. You will get the list and double click on the relevant one. The to the left hand side you can find "What Happened". Click on it and you will get the description and other details of where it failed.
b. The other method is, normally a workflow triggers into your SAP Mail box. So, you can go to Tcode: SBWP, Go to Inbox and check for unread documents. You will find the update termiantion there. You can double click on it to get the details.
You can also check with your technical team on the same.
Hope this helps
Thanks
Mukund S

Difference between statistical update &document update in V1 or V2

Hi gurus,
i would like to konw difference between statistical update &document update in V1 or V2.Whats purpose of these actually.
thanks in advance.
sankarvas

Hi Shan,
Basically u use these Update types in LIS extraction. V1 stands for Synchronous update and V2 Stands for Asynchronous update.
Usually U use V1 for the time critical Updates and V2 for non-time crtical updates.
Usually u will go for Statistical update at the time of full update or Initialize with delta.
Regards-
MM

Recently Uploaded / Updated Documents & Pages

Hey All,
I am wondering if there is an out-of-the-box type of capability to display recently uploaded and or updated documents and pages. I know there are notifications and subscriptions but what i need for example is: Pull 5 newest uploaded documents (.pdf,.txt,.doc.,docx. etc.) from specified folder and subfolders. Pull the most 5 recent news from news folder and subfolders. Pull 5 recently updated pages. All should be displayed with a similar layout.
Document/Page/News title with hyperlink to that document or page.
Document Name1.doc
Document Name2.doc
Document Name3.doc
Document Name4.doc
Document Name5.doc

Hi
Take a look a this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/45bcc1c0-0d01-0010-1094-fe7993416ea6
Regards
DV

Updating Document Description

What is the best way to update document description?
We are trying to use BAPI_DOCUMENT_CHANGE2 but it is not updating DIR description.
We also tried using Commit post this BAPI.
Thanks and regards

Hi Niketan,
BAPI_DOCUMENT_CHANGE2 is the correct way.
Could you please send the code?
I guess there is one of following mistakes:
DMS key is not provided in parameters DOCUMENTTYPE, DOCUMENTNUMBER, DOCUMENTPART and DOCUMENTVERSION
DOCUMENTDATA-DESCRIPTION is set to new text but DOCUMENTDATAX-DESCRIPTION is not set to 'X'
function module BAPI_TRANSACTION_COMMIT has to be executed after change
Using this the text in the actual language will be set/changed.
To change other languages you could use table Parameter DOCUMENTDESCRIPTIONS.
Regards,
Benedikt

How do I remove a 1 showing up in the corner of my sephora app? I don't see an update so what does it mean? Help!

How do I get rid of a number 1 on the top right hand corner of my sephora app? There are no updates, so what else can it be? Help!

Looks like you have a notification.
In the Sephora app, tap the Settings gear then Messages inbox.

S_ALR_87012357 update document, what filed ?

Similar Messages

Maybe you are looking for