S_ALR_87013336 does not display company code currency

Hi Gurus
My client has controlling area currency USD and company code currency CAD. The standard report S_ALR_87013336 displays in USD only but not in CAD. Is there any way where I can change to display company code currency in this report.
Your expert suggestion is highly solicited.
Thanks

Hi
Use TCode Select Form 8A-PCA013G which is attached to the report S_ALR_87013336. You would have a key figure KSL_STOCK, change it to HSL_STOCK which is balance in company code currency.
That would meet your requirement.
Regards,
Suraj

Similar Messages

PO creation-ME21n-Why SAP does not check company code and Plant relation

Hi All,
Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
<b>Example:</b> Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
How can we put this check in place?
Thanks in advance.
Deepak

Hello Deepak,
There are three types of purchasing
- Company code specific :You need to assign company code to Pur organization
- Plant specific : You must assign plant to pur organization
- Cross company purchasing: No assignment between company code and pur organization.
In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
The following is the copy of sap help text:
You can assign a purchasing organization to one company code. This is company-specific purchasing.
You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
Now, check your company-code and purchase organization assignment.
Hope this helps.
Regards
Arif Mansuri

Query does not display the code.

Hi Experts,
I created a query joining SKA1 and SKB1 with the following requirements:
Query of the chart of accounts total for each company code with the following additional information:
- reconciliation list: yes or no / for which sub-ledger (cutomer, accounts payable, assets or others)
- binding on interim transaction: yes or no.
I have successfully created a query but instead of displaying the code (for example AA01-company code) the name of the company was displayed.(example: ABS Company) this is also the same with other fields like the GL account, instead of displaying the numerical value, the text description was displayed even if I have selected the correct field assignment (SKB1-BUKRS).
Your inputs are very much appreciated. thanks in advance!

Hi,
Are you creating this query under SQVI TCode?
Because when i am doing the same thing... its working. i can see he company code coming up as AA01.
SKB1-BUKRS is for Company code number... then how it can display Company code Description.
Best Regards
Guneetinder

Ddd does not display source code when loading compiled program

Hey everyone,
I'm writing a C program right now and I would like to use ddd. The problem is, the source code window is completely blank. Has anyone ever run into this before? I really don't even know where to start looking to fix this problem. Yes, I have loaded my compiled binary (I can see the assembly instructions in the machine output). I use both awesome and xfce (different sessions) and it does not work in either.
Here is the relevant configuration info:
extra/gdb 7.3.1-1
aur/ddd-syntaxfix
awesome 3.4.10
xfce 4.8
I had to install ddd from AUR since ddd seems to have a bug in it where it will not show the machine code without a fix.
If you need any other info just ask and I will provide it.

This Forum is for Forte 4GL or UDS as its called today. I am not sure if anybody is going to be able to answer your question here. Sorry.
ka

S_ALR_87013336-Profit Ctr Group-Balance Sheet-In Company Code Currency

Does anybody know how to have SAP Transaction/Report S_ALR_87013336 output data in Company Code Currency? I have tried to run this transaction several ways but it is coming up in Controlling Currency (USD) and we would like the ouptut to be in Company Code Currency.
Thanks in advance for your review and advice.
Roman

The report is built on drill-down reporting tool and is defaulted to "Balance in profit centre local currency (i.e. controlling area currency)". It works with form and report.
Change the key figure from "Balance in profit centre local currency" to "Balance in company code currency"
KE85 Chang form. Select form 8A-PCA013G
Key figure on the right side > double click on the line item s > Element definition screen popped up - from there change the key figure from "Balance in profit centre local currency" to "Balance in company code currency"

Local currency vs company code currency

Hi
Can company code currency is diff. from local currency ?
In 90 % cases co. code is always local ..
Thank you
Vedavatee

Exactly prakash, but is there a consequence by not using company code currency as the local if we want to produce reporting but with the hard currency ?
What is the difference between using "local" (used day to day) currency as company code currency and using it as hard currency ? Is there an issue to convert exchange rates to produce statutory reporting ?
I hope my question is clear.
Thanks a lot.

Cost Center Data in Company Code Currency

Hi All,
We have a requirement to develop a Cost Center Report with Company Code, Account Number and Amount in Company Code Curreny.
I have checked table COEP, we can get data of CCode, Account Number. But Amount will be in Object Currency/Transaction Currency / COArea Curreny and not in Company Code Currency.
Is there a way to get Cost Center data in Company Code curreny.
Please advice.
Thanks
Satish

Hi,
   In CO, you specify in the year-dependent settings for the controlling area (Transaction OKKP) whether you want to use one or more currencies (flag "All currencies", TKA00-ALLEW).
If you decided to use one currency only, all documents are only managed in CO area currency.
If you decided to use several currencies, the following three currencies are managed in CO:
    1. Controlling area currency
       The controlling area currency can be:
       - 10 company code currency (only if all company codes assigned to CO area have the same currency)
       - 20 free controlling area currency
       - 30 group currency
    2. Object currency (defined per object)
As a rule, the object currency is the company code currency. Only in one case the object currency can be freely chosen, that is, if flag "different company code currencies allowed" is not active. This flag is set automatically if CO area currency is not 10 and cross-company code accounting is set.
    3. Transaction currency (could be different in every posting).
regards
Waman

Country IN does not store a hard currency while editing company code data

hi, i am new to sap. i defined company n company code (copying from std) and edited company code data, while trying to save that getting error "Country IN does not store a hard currency". please guide me what have to do to over come this. thanks

GOTO OY01
select your country code ( here IN )
select IN, GOTO details (ctrl shiftf2)
change language to EN & hard currency to INR, save it
Regards
sidhartha

Company currency does not differ from company code currency

Hi Everyone,
I am a newbie in SAP FI. Forgive me if this is a rpet pos. I could not find an answer using search.
Here is my problem:
I defined a compay with currecny as USD. I defned two company codes one with currency USD and the other
with currency INR.
I assigned compay code 1 (with USD as currency) to cmpany successfully.
However, when I tr t assign the secnd company ( wih INR currency)it gives me the following error:
"Company currency does not differ from company code currency".
How do I solv this problem.
Thaks,
Cheruvu

hi
when you defined your company currency as USD and Company code currency is also USD therefore it is not shown any warning but second company code currency taken as INR system expressing warning since company currency and company code currency differs as company stands for group for consolidation point of view
therefore it is only warning not error you can just enter and further configure nothing will be adverse
regards
srinivask

Miro Company code currency amount displaying 0, incorrect posting

Dear All,
When I use miro to simulate one of my posting which is in the foreign currency is showing incorrect when changing to company code currency.
By right there should be a ppv posted, however it does not show the gl accoutn for the vendor and the amount is totally wrong and it only show the gr/ir clearing amount which is correct.
Any kind souls can help me?
Many Thanks!!!

Anyone can help ???

KE30 report display in company cod currency

Hi,
We have two company code:
1. In China, currency:CNY, controlling area:A operatiing concern:C, Operating concern currency is :CNY
2. In HK: currency:HKD, controlling area:B operating concern:C
So two company codes having different currency, two controlling area, but same operating concern.
Now for HK company code, every COPA posting, have two lines in CE1R***, one with currency:CNY with currency type:01 operating concern currency, one with currency:HKD with company code currency.
My question is for KE30 report, for HK company code, how to directly show in HKD? If using currency translation, the number will not show correctly.
Thanks.

HI,
the report creation/definition must be made for operating concern currency (CNY) and comp. code currency, this allows to select the currency type (10 or B0) during report execution. Zhis happens when you are executing KE31 to create a new report and cannot be changed if the report is already created.
If your report was only created for operating concern currency you cannot display comp. code currency values.
Best regards, Christian

Apple TV does not display Watch ESPN activation code

Hi.
I am trying to activate Watch ESPN on my Apple TV and the app does not display an Activation Code. There is a big, blank space where one would logically think an activation code could fit but, unless it
is written in black text on a black background, I'm not seeing it. Not sure if the fact I'm trying to activate a Time Warner Cable account matters or not.
Thanks!
TH

I now believe that your Apple TV has to have a hard internet line in order to connect to ESPN. At least that's what sorted me out.
Cheers!

Why "You do not have authorization to display company codes" ? Thanks

Hello,
Using the Tutorial BAPI which comes with the JCO Tutorial,I just wanna call the first function.
When I run the code, it display "You do not have authorization to display company codes".
Could any body please help me to explain why?
Thanks a lot
BELOW IS THE CODE:
package com.sap.slc.teamweb.test;
import com.sap.mw.jco.*;
public class TestBapi1 extends Object {
    JCO.Client mConnection;
    JCO.Repository mRepository;
    public TestBapi1() {
        try {
            // Change the logon information to your own system/user
            JCO.createClient("001", // SAP client
              "<userid>", // userid
              "****", // password
              null, // language
              "<hostname>", // application server host name
              "00"); // system number
            mConnection.connect();
            mRepository = new JCO.Repository("SAPJCO", mConnection);
        } catch (Exception ex) {
            ex.printStackTrace();
            System.exit(1);
        JCO.Function function = null;
        JCO.Table codes = null;
        try {
            function = this.createFunction("BAPI_COMPANYCODE_GETLIST");
            if (function == null) {
                System.out.println("BAPI_COMPANYCODE_GETLIST" + " not found in SAP.");
                System.exit(1);
            mConnection.execute(function);
            JCO.Structure returnStructure = function.getExportParameterList().getStructure("RETURN");
            if (!(returnStructure.getString("TYPE").equals("") || returnStructure.getString("TYPE").equals("S"))) {
                System.out.println(returnStructure.getString("MESSAGE"));
                System.exit(1);
            codes = function.getTableParameterList().getTable("COMPANYCODE_LIST");
            for (int i = 0; i < codes.getNumRows(); i++) {
                codes.setRow(i);
                System.out.println(codes.getString("COMP_CODE") + '\t' + codes.getString("COMP_NAME"));
        catch (Exception ex) {
            ex.printStackTrace();
            System.exit(1);
        try {
            codes.firstRow();
            for (int i = 0; i < codes.getNumRows(); i++, codes.nextRow()) {
                function = this.createFunction("BAPI_COMPANYCODE_GETDETAIL");
                if (function == null) {
                    System.out.println("BAPI_COMPANYCODE_GETDETAIL" + " not found in SAP.");
                    System.exit(1);
                function.getImportParameterList().
                setValue(codes.getString("COMP_CODE"), "COMPANYCODEID");
                function.getExportParameterList().
                setActive(false, "COMPANYCODE_ADDRESS");
                mConnection.execute(function);
                JCO.Structure returnStructure = function.getExportParameterList().getStructure("RETURN");
                if (!(returnStructure.getString("TYPE").equals("") ||
                returnStructure.getString("TYPE").equals("S") ||
                returnStructure.getString("TYPE").equals("W"))) {
                    System.out.println(returnStructure.getString("MESSAGE"));
                JCO.Structure detail =
                function.getExportParameterList().
                getStructure("COMPANYCODE_DETAIL");
                System.out.println(detail.getString("COMP_CODE") + '\t' +
                detail.getString("COUNTRY") + '\t' +
                detail.getString("CITY"));
        catch (Exception ex) {
            ex.printStackTrace();
            System.exit(1);
        mConnection.disconnect();
    public JCO.Function createFunction(String name) throws Exception {
        try {
            IFunctionTemplate ft = mRepository.getFunctionTemplate(name.toUpperCase());
            if (ft == null)
                return null;
            return ft.getFunction();
        catch (Exception ex) {
            throw new Exception("Problem retrieving JCO.Function object.");
    public static void main(String args[]) {
        TestBapi1 app = new TestBapi1();

Hi Mao,
R/3 comes with some predefined Company Codes and we also
can define our own Company Codes.
visit this link this may help you.
http://help.sap.com/saphelp_erp2004/helpdata/en/8e/1a5217171311d28e1d080009b6ab29/frameset.htm
Regards,
Narinder Hartala

Display Co-Pa Line item in company code currency

Hi,
I am following the document trail (e,g, from FB03) to the co-pa line item.
The initial display is in operating concern currency and I have to switch to company code currency (which is implemented as well).
How can I switch that the initial display is already in company code currency (or transaction currency)?
Thanks for an answer
Best regards,
Gotthard Friedrich

Hi,
I've never seen a way to set the default currency as comp. code currency in KE24. It is just one tick at the comp. code curr. button to get your result, guess this is acceptable )
If you can define a default layout with currency type B0 instead of 10, this should fix it.
Best regards, Christian
Edited by: Christian Ortner on Sep 14, 2010 3:37 PM
Edited by: Christian Ortner on Sep 14, 2010 3:38 PM

Company code currency balance not equal Group currency balance

Dear experts,
Some of our account balances are inconsistent bewteen the company code and the group amount. This company has the same currency in both the company code and group currrencies which are USD. The exchange quotation is also setup in OB08 with 1 in both dir / indir quote. Below is an example for a HKD expenses with a HKD AP account.
GL accounts setup with same currency as company code / group currency.
Exchange quotation setup in OB08 for HKD to USD is dir.qut. 7.8 and indir.quot 7.8.
After translation, the result supposed to be,
In Document currency, Dr expenses HKD780, Cr AP HKD780
In Local currency (company code currency), Dr expenses USD100, Cr AP USD100
In Group currency, Dr exepnses USD100, Cr AP USD100
However, the current result is,
In Document currency, Dr expenses HKD780, Cr AP HKD780
In Local currency (company code currency), Dr expenses USD100, Cr AP USD100
In Group currency, Dr exepnses USD110, Cr AP USD110
The amount in local and group currency should be the same supposedly as they are in the same currency.
Have anyone ever experienced the same situation?

Thanks all,
I have checked that both 1st local currency (company code currency) and 2nd local currency (group currency) are USD.
Our user also didn't change the group currency amount during data entry as there seems no way to alter the amount as it is greyed out.
Is there any other configuration or system flow that may be configured to post these 2 currency amount in a different way of translation?

S_ALR_87013336 does not display company code currency

Similar Messages

Maybe you are looking for