S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report performance issue

I'm trying to get the "actual line item" details from the S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report and I get a
ABAP run time error. I tried to running for just one month and on several accts. please help to me. how to get the report.
or how to improve the performance of this program.
Thanks in Advance

hi,
first we need to know what part of the code is taking time. Do run time analysis using SE30 transaction to know what part of coding is taking more time. use can ST12 transaction to get more detailed analysis.
Since this is standard SAP report also check any OSS note exist for the performance problem.

Similar Messages

S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance

Hi,
I am looking to branch off from a line item in the S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance report to the actual posting document. Is there a way to do this?
Thanks,
Ram
Message was edited by:
Ram R

Hi Nadini,
Thats cool. I have assigned points.
Another question. S_ALR_87013326 shows balance sheet accounts as well with zero balances. Is there a way to eliminate these accounts or populate them with the relevant values.
Thanks,
Ram

Error in S_ALR_87013340 - Profit Center Group: Plan/Actual/Variance

Hi Sapians
When I execute the following report by enter following data
Controlling Area ZZZ
Fiscal Year 2009
From period 03
To period 03
Or values (Profit Center)
Profit and Loss account Group (say 127)
S_ALR_87013340 - Profit Center Group: Plan/Actual/Variance
I know there is no posting in March 2009 but system show considering Jan to Mar 09.
Actualy I need to check posting for the month March 2009 or Feb 2009
Regards

An SAP standard report writer is used in the transaction. The report group that is used is 8A26 (T-code GR53 for display).
There is a column set 8A-STOCK.GLPCT that uses the basic set 8A-VT-BIS.GLPCT for the field period (GLPCT-RPMAX). This is set to from value 0 to &8A-BIS (variable). Therefore when you enter 3 for march, it takes the value cumulative to 3 or whatever period you enter.
You could copy this report and change the values suit your requirement.

Plan, Actual & Commitment Report in Multiple Currency

Dear SAP gurs,
Is there any report where I can see Plan, Actual & Commitments in Multiple currency (see below format). In standard SLAR reports, values are displayed in one currency at a time either I can see in INR or USD.
Here each WBS is planed in USD as well as in INR. If PO is raised in USD, then actual value should be shown against planning done in USD.
WBS Elem     Plan          Actual          Commitment
     USD     INR     USD     INR     USD     INR
WBS1.1     3000$     1000INR     500$               500INR
WBS2.2          50000INR          10000INR          300INR
Thanks,
Venkat

Dear Venkat
Each of the views in the hierarchy reports (such as 12KST1C) can
only contain values for one currency at a time (because totals for
multiple currencies would not make sense).
Since only one currency can be displayed at a time, the Trans.currency view is not meant to show values in multiple currencies; rather, the Trans.currency view only provides a reference to the user of the currency involved in the Plan and
Actual postings. For example, if the actual postings had been in
mixed currencies like:
Doc. date Cost elem.    Value COCurr CO.Cr      Value TranCurr TCrcy
   01-07-2007 911010000                 800   XXX                        1700 YYY
   01-07-2007 911010000              3,000   XXX                        3,000 XXX
Then the Trans.currency view would have contained:
Trans.currency         Plan             Actual
YYY                            0             800
XXX                         3,700           3,000
Result                     3,700           3,800
You can always switch between currencies in the report Settings ->
Currency, but only one will be displayed at once.
I hope this explanation helps you to understand the standard system
behaviour.
Regards
Martina

XL Report performance issues

Hello All,
We are running some XL reports and facing some performance issues: 10 mins for a report to run.
We don´t plan to split this report in many other ones, and I have already run the SQL tools for reorganizing and reindexing the tables (I believe this is nothing to do with performance but ran it anyway...) without any improvements.
Can anybody be a help on this?
Thanks!

Hi Siavauch Saleki
Name the report which take too long to run, i have worked on XL report, when i run report from client system it takes some long time,
try running to run from server
another way of making it faster is go to Task manager in the process tab
Change the priority of XL Reporter , excel to HIGH
THIS WILL MAKE IT FASTER BY ALLOCATING MORE PROCESSOR TIME FROM OS TO IT
This should improve the reporting speed
Let me know how it works
Regards
Krish

Report Performance Issue - Activity

Hi gurus,
I'm developing an Activity report using Transactional database (Online real time object).
the purpose of the report is to list down all contacts related activities and activities NOT related to Contact by activity owner (user id).
In order to fullfill that requirment I've created 2 report
1) All Activities related to Contact -- Report A
pull in Acitivity ID , Activity Type, Status, Contact ID
2) All Activities not related to Contact UNION All Activities related to Contact (Base report) -- Report B
to get the list of activities not related to contact i'm using Advanced filter based on result of another request which is I think is the part that slow down the query.
<Activity ID not equal to any Activity ID in Report B>
Anyone encountered performance issue due to the advanced filter in analytic before?
any input is really appriciated
Thanks in advanced,
Fina

Fina,
Union is always the last option. If you can get all record in one report, do not use union.
since all records, which you are targeting, are in the activity subject area, it is not nessecery to combine reports. add a column with the following logic
if contact id is null (or = 'Unspecified') then owner name else contact name
Hopefully, this is helping.

Report performance Issue in BI Answers

Hi All,
We have a performance issues with reports. Report is running more than 10 mins. we took query from the session log and ran it in database, at that time it took not more than 2 mins. We have verified proper indexes on the where clause columns.
Could any once suggest to improve the performance in BI answers?
Thanks in advance,

I hope you dont have many case statements and complex calculations that you do in the Answers.
Next thing you need to monitor is how many rows of data that you are trying to retrieve from the query. If the volume is huge then it takes time to do the formatting on the Answers as you are going to dump huge volumes of data. Database(like teradata) returns initially like 1-2000 records if you hit show all records then even db is gonna fair amount of time if you are dumping many records
hope it helps
thanks
Prash

Accrual Reconciliation Load Run report performance issue.

we have significant performance issues when running accrual reconciliation load run report. we had to cancel after have it run for a day. any idea on how to resolve it?

We experienced similar issue. As the runtime of this report depends on the input parameters. Remember, your first run of this report going to take significant amount of time and the subsequent runs will be much shorter.
But w had to apply the patches referred in the MOS article to resolve the performance issue.
Accrual Reconciliation Load Run Has Slow Performance [ID 1490578.1]
Thanks,
Sunthar....

HR ABAP- Report Performance Issue

Can you please any body tell me how to debug a report program by putting watch points and break points.
Waiting for your Reply.
Anu
Bangalore

Hi,
           If you have programm name then proceed with SE38 or take the programm name from Trasaction code which you are using.
Break Points:   If it is performance issue , put external break points around select querie and loop ---end loop.
Watch Points : in the debug screen choose the watch point option and give the field name from your internal table for which you want to put watch point.
After that give the range which you record you want to see in the range options.
for these steps: 1. Execute your programm.
       2. In the selection screen enter /h in the command window to start debugging screen or put break points before excuting.
     3. Once you are in debug screen then start woring with F5 or F6 or F7 and create watch points where ever you like.

FRS report performance issue

Hello,
We have a report developed in FRS in the below style.
http://postimg.org/image/bn9dt630h/b9c2053d/
Basically, all the dimensions are asked in POV. In the rows of the reports, we have two sparse dimensions that are drilled down to level 0 as shows in above report. The report works fine when run in local currency (Local currency is a stored member). When the report runs in a different currency (dynamic member) then it keeps on running for ages. We waited for 45 minutes and then had to cancel a report, when the same was run in local currency, it gave us our results in 30 seconds.
My thinking is that there should be a better way of showing level 0 members than using "Descendants of Current Point of View for Total_Entity AND System-defined member list Lev0,Entity" as I presume what it does is get descendants as well as level0 members and then compare them. I have alternate hierarchies hence I am using this, isn't there a simple way of saying - just give me level 0 members of the member selected in POV ?
I have used below parameters
Connection - Essbase
Suppress rows on Database connection server
Regards,

Hello,
>> The report works fine when run in local currency (Local currency is a stored member). When the report runs in a different currency (dynamic member) then it keeps on running for ages.
You are focusing on the report. The most likely reason is in the performance of the database. Ofcourse, you can reduce the query size and get your report performing again, but the root cause is likely the database design.
I do not know a function to drill down to the level0 members of the selected POV member.
If this is something different per user, then you might think about meta-read filters. They would remove all that is not granted.
Regards,
Philip Hulsebosch

Database migrated from Oracle 10g to 11g Discoverer report performance issu

Hi All,
We are now getting issue in Discoverer Report performance as the report is keep on running when database got upgrade from 10g to 11g.
In database 10g the report is working fine but the same report is not working fine in 11g.
The query i have changed as I have passed the date format TO_CHAR("DD-MON-YYYY" and removed the NVL & TRUNC function from the existing query.
The report is now working fine in Database 11g backhand but when I am using the same query in Discoverer it is not working and report is keep on running.
Please advise.
Regards,

Pl post exact OS, database and Discoverer versions. After the upgrade, have statistics been updated ? Have you traced the Discoverer query to determine where the performance issue is ?
How To Find Oracle Discoverer Diagnostic and Tracing Guides [ID 290658.1]
How To Enable SQL Tracing For Discoverer Sessions [ID 133055.1]
Discoverer 11g: Performance degradation after Upgrade to Database 11g [ID 1514929.1]
HTH
Srini

Hyperion Interactive reporting performance issue.

Hi,
We created a report in Hyperion Interactive reporting using Hyperion Essbase as database connection file .
Report performance was good in Interactive reporting Studio we don't have any problem in studio.
when we open the the report in Hyperion Workspace We are facing performance issue of the report and also when i hit refresh button to refresh data in the Workspace,i am getting the following error message
*"An Interactive Reporting Service error has occurred - Failed to acquire requested service. Error Code : 2001"*
Any suggestions to resolve this will be really helpful.
Thanks in advance
Thanks
Vamsi
Edited by: user9363364 on Aug 24, 2010 7:49 AM
Edited by: user9363364 on Sep 1, 2010 7:59 AM

Hi
i also faced such an issue and then i found the answer on metalink
Error: "An Interactive Reporting Service Error has Occurred. Failed to Acquire Requested Service. Error Code: 2001" when Processing a bqy Report in Workspace. [ID 1117395.1]
Applies to:
Hyperion BI+ - Version: 11.1.1.2.00 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
Obtaining the following error when trying to process a BQY that uses an Essbase data source in Workspace:
"An Interactive Reporting Service error has occurred. Failed to acquire requested service. Error Code: 2001".
Cause
The name of the data source in the CMC contained the machine name in fully qualified name format whereas the OCE contained the machine name only. This mismatch in machine names caused the problem. Making the machine name identical in both cases resolved the problem.
Solution
Ensure that the name of the data source as specified in the OCE in Interactive Reporting Studio matches the name specified in the CMC tool in the field "Enter the name of the data source".
In fact, all fields need to match between the OCE and the CMC Data Source.
regards
alex

2014 SSRS Reports Performance issues

Hi All,
After upgrading SQL 2008 reports to SQL 2014 i observed there is performance lag in 2014 ssrs reports,
2008 reports which used to render in <2 secs now taking >50 secs,
After doing some checks on why this lag occurred, i found that this is because of the expressions in reports, If i remove all the expressions then report renders < 2 secs otherwise its taking >50 secs
My question here is, we used the same expressions in 2008 version also which displays the report in <2 secs but why same thing taking more time in 2014 version.
Is expressions handling in 2008 and 2014 different.
and below are the expressions used in the both the versions
IIF(ISNOTHING(Fields!Comp.Value),"-",Fields!Comp.Value)
IIF(ISNOTHING(Fields!Base.Value),"-",Fields!Base.Value)
IIF(ISNOTHING(Fields!Var.Value),"-",Fields!Var.Value)
iif(Fields!check.Value=true,"yellow","Transparent")
Thanks in advance
Chandra.

Hi Chandra,
According to your description, the same report render slower in SQL Server 2014 than in SQL Server 2008.
In both SSRS 2008 and SSRS 2014, the expression is processed in the same way. In Reporting Services, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the
table Executionlog3 in the ReportServer database. For more information, Please refer to this article:
More tips to improve performance of SSRS reports.
After check out which section costs most of time, then you can refer to this article to optimize your report:
Troubleshooting Reports: Report Performance.
If possible, please share some information about your report migration.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Deski reports performance issue

After an upgrade from BOXI Release2-SP3 to BOXI Release3.1-SP3 all the deski reports are very slow when we try to refresh them using Infoview.
For example, a specific deski report needs two minutes from Desktop Intelligence and twenty!!! minutes from Infoview. The same behavior have all the migrated deski reports. Do you have any idea/workaround??

hi,
- Set the array fetch size as 500 and array bind size as 32767 in Universe Parameters
Following links will be helpful.
http://www.forumtopics.com/busobj/viewtopic.php?t=142973&sid=0a48878553739783e77ca43ae06c5cdb
Performance issue with Deski in three tier mode
Regards,
Vamsee

Webi Reports - Performance Issues

Hi Experts,
       Right now we are using BO XI R2 version. We have 2 servers, server 1 is old and server 2 is new (AIX server u2013 new upgrade of old server).
      When I trying to schedule the report (webi) in both server, reports is running successfully. But problem is that the report scheduling time is more in new server (AIX) than old server (Server1).
There is some performance issues
Example:
Old serve     : 1 hrs (time taken)
New server : 2 hrs (time taken)
Could you please tell me how to increase the webi report performance in new server?
Regards,
Sridharan Krishnan

Hi,
How to enable Excel and Pdf option under Save as file in infoview.
When i trying to click modify option under public folder reports ,Report is getting open but i am not able to save that report as excel or pdf , since those option is disabled in infoview.
But it is enabled in user private folder Reports.
Right now we have upgraded the objects from XI R2 to BO 3.1, Since there is some difference in security rights in 3.1, Please tell me how to fix it.
BO Version u2013 3.1
Regards,
Sridharan

S_ALR_87013340-PRCtr Group:plan/Actual Caomparison Report performance issue

Similar Messages

Maybe you are looking for