S_ALR_87013531 how to increae its performance during execution

Dear sir
How to increase the performance of this eport S_ALR_87013531 during execution,since it taking six hours or gives run time exceeded error.
Regards
kunal

Hi,
I dont think it should take 6 hrs to execute this report.
Please check with your BASIS consultant.
Muzamil

Similar Messages

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

Take a look at this document that discusses how to monitor IMAQ memory usage:
http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
Hope this helps -
Julie

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

got these vi's off ni site a while ago - see if they help
Attachments:
Memory_Monitor.zip ‏132 KB

How do you log SAP vendor activity performed during an OSS Connection?

Hello Everyone,
What is the best and cost effective way to log SAP vendor activity while they are connected to perform OSS related work?
The environment under review provides an OSS SAP support ID and password to the vendor to facilitate the authentication, however, no security audit logging is performed. The SAP team is raising performance issues as the reason why the logging is not turned on.
Is there a way to restrict the security logging only to the OSS support ID and also determine the activity performed during the session? Basically, how can the internal team know that an unauthorized activity was performed during the connection and / or someone made several failed attempts to authenticate through the OSS connection?
Thank you.

It also records the GUI event and is regardless of the success of starting the activity, let alone completing it.
In my books it is "fluffy" security which is inherently flawed for the purpose you are using it for. The main reason for the records is response times.
It only works because authorization concepts are sometimes inherently flawed in their implementation as well.... so people believe what they see...
But for forensics it is usefull IF you are fast enough...
Cheers,
Julius

How to reconnect to a database if connection is lost during execution

How to reconnect to a database if connection is lost during execution of the program.
Please help me.
thanks in advance.

First close the old connection with "connection.close();" Catch all exceptions in case close() fails. Then open a new connection just like you opened the original one.

How can I show and hide an image or a decoration on the front panel during execution of the vi?

Hello,
I've made a user interface with a little grafic description.
That description should change depending on user actions, e.g. if the user switches a button, some lines should disappear and some other lines should appear.
I thought some decorations could be shown and hidden via something like a property node, but that is not possible. Images can also not be hidden during execution of the program.
Is there any posibility to change a grafic user interface?
Johannes
LV 7.1
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently
Attachments:
LV_Grafic.JPG ‏21 KB

Thanks to Tim for drawing what I suggested as option while I had some real work to do.
There is a trick of overcoming the index problem that was presented/devloped in the forum in the last month's:
You can place the decoration inside a cluster, so you can use the lable of the cluster to adress the decoration you want. The data type of the cluster doesn't mather for this, so you will hide the control/indicator. And you colour the cluster transparent (hint: right click with the coloring tool and use space to toggle).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

How to have continouse performance testing during development phase?

I understand that for corporate projects there are always requirements like roughy how long it can take for certain process.
Is there any rough guideline as how much time certain process will take?
And is there anyway i can have something like JMeter that will do constant monitor of the performance as i start development?
Can go down to method level, but should also be able to show total time taken for a certain module or action etc.
I think it is somthing like continuous integration like cruise control..but is more for performance continouse evaluation..
Any advice anyone

Just a thought: how useful would continuous performance testing be? First off, I wouldn't have the main build include performance tests. What if the build fails on performance? It isn't necessarily something you'll fix quickly, so you could be stuck with a broken build for quite some time, which means either your devs won't be committing code, or they'll be comitting code on a broken build which kind-of negates the point of CI. So you'd have a nightly build for performance, or something. Then what? Someone comes in in the morning and sees the performance build failed, and fixes it? Hmmm, maybe your corporate culture is different, but we've got a nightly metrics build that sits broken for weeks on end before someone looks at it. As long as the master builds are OK, nobody cares. Given that performance problems might well take several weeks of dedicated time to fix, I reckon they're far more likely to be fixed as a result of failing acceptance tests, rather than the CI environment reporting them
Just my opinions, of course

Upgraded 2012 MACBOOK PRO 2.6Ghz 8GB RAM 750 GB an alternate for RETINA MBP 15 or NOT?How good is its potential, reliability ?

I am a student and an aspiring filmmaker.I am also into digital cinematography (Canon 550D) and now will be venturing into editing. I am in DIRE NEED of help
I have a few problems regarding the purchase of Macbook pro.I live in Kolkata(India).I have been waiting for the past 1 and a half years to buy a Mac but after the release of Retina Macbook pro 15.I am left confused. Its near unupgradability and unreparibility rumors, delayed delivery, and 1st generation hardware issues especially the lack of Optical drive made me reconsider my decision of buying one.
I want to know whether I can go for the top model of Non Retina - 2.6Ghz 8GB RAM 750 GB 1 GB Nvidea as an alternate choice for Retina MBP pro or NOT ?
1.I wanted to buy the Retina Base model. Though it is very recently launched and there is a big risk buying it because they say it is unrepairable and unfixable as 'everything is glued into the motherboard' dialogue scares me. Something goes wrong after purchase and they send it back to US, is what the Apple officials said. Moreover they don’t keep one on a demo at Apple stores in kolkata. I have searched almost everywhere and have been to many resellers in my city but no use.
NOW,I am very sceptical about custom ordering a Macbook 15 non retina with High-Res 1680X1050p from US.I don’t know how much custom duty or expenses I have to pay and is it safe or not. Time is also a factor. Sadly, I have to buy one in Kolkata (my city) it seems.
2. I am opting for Macbook Pro 15,2.6 Ghz,8GB RAM. Buying it for the sole purpose of editing(audio, video, photos).I need something which is fast along with a good screen size. My original decision was to buy the 17inch but after the launch of Retina and the upgraded 15 inch, I am only looking forward to the upgraded models. Many say 13 inch is fast, but it features a dual core with a maximum of 2.9Ghz clockspeed. I on the other hand want a quad core i7 with good upgradability options and a good screen size. The 13 inch may be a favorite for many, but I want nothing less than a 15 inch. One good option I get with non Retina 15 is its upgradability, while many say Retina MBP 15 can be made upgradable in future but that time is yet to come and by the time the whole web becomes ‘retina friendly’ and all applications supporting its 2880X1800 resolution, I may end up waiting only. Yes the picture quality remains unbeatable when compared to Retina Pro and it will always be. Though friends, I am a student, I want something which is fast, can run almost anything and future dependable. Retina Mac book Pro in India is 2799 USD - Base model. I cannot pay that amount just for the screen. As far as speed is concerned, I plan to get an OWC SSD and a 16 GB OWC RAM in the future resulting in greater speed when comparing the configuration with Retina 15.That problem is solved.
My problem here is this: The web is filled with reviews and videos of Retina Macbook Pro and the upgraded Macbook Pro 15 is just no where, if you even find a few videos, they only feature unboxing videos of Macbook pro 15 (i7-2.3Ghz-4GB-500GB-500MB Nvidea).Other videos compare the 2.3ghz model with Retina 15 pro. They are not elaborate like the 15 Retina Pro reviews.
1. I want to know about the real performance, potential, pros, cons of Macbook Pro 15 (i7 2.6Ghz 8GB RAM 750 GB 1GB Nvidea graphics).
So my question to you is what is your opinion on the 15 inch non retina ? HOW FAST do you think is the new upgraded 15inch non retina i7-2.6Ghz-8GB-750GB model really is ?I have read on many mac forums and seen on a particular youtube video that 15inch 2.3Ghz model takes an alarming 40 seconds to start because of traditional hard drive ! A normal DELL Inspiron starts at 15 secs max with i3+4 GB RAM and this particularly confuses me about the whole quad core processing and stuff and speed when running applications like C6,FCP,Lightroom etc is to be determined in regard to the model I want to buy.
2. Is it necessary to buy APPLE CARE WARRANTY when buying a laptop from Apple.What are the benefits and how is it different form the normal customer care ?
3. Please enlighten me on some nice headphones from Sennheizer under 90 USD.I am considering Sennheiser HD 439.I am not a bass freak and I want something to use for listening to voice, loud clear. In short, a headphone for all purpose. I heard the HD 449 is not that good compared to HD 439.They say it is Jazz oriented. Another confusion !
Finally, If you know anyone who knows about this configuration (15inch 2.6 8GB RAM 750GB) and its performance than please help me out my friends. Any small detail, input, you feel like please let me know. Please help me be sure and satisfied am buying my Macbook Pro very soon and I am awaiting your response.

Well, are you talking about a 750 Hard Drive or SSD? If SSD (quite expensive) it will certainly be as fast. One option is to get the smallest HD they have and with the Non Retina you can upgrade the HD to an SSD later or now but save a little money. Check with iFixit or OWC for instructions. HD's do take longer to start up and load, but once open, the processor and video work just the same as on the Retina model. The SSD speed is nice, but really not critical. So you have to wait a minute for your computer to boot up. The other big question is you need to find out if the non-retina model will take 16GB of ram. According to OWC's site, it will, 16GB for 150USD. Once you get programs open and resident in ram, everything will fly.

MACBOOK PRO 2.6Ghz 8GB RAM 750 GB(Upgraded MBP 2012) an alternate for RETINA MBP 15 or NOT?How good is its potential, reliability ?

I am a student and an aspiring filmmaker.I am also into digital cinematography (Canon 550D) and now will be venturing into editing. I am in DIRE NEED of help
I have a few problems regarding the purchase of Macbook pro.I live in Kolkata(India).I have been waiting for the past 1 and a half years to buy a Mac but after the release of Retina Macbook pro 15.I am left confused. Its near unupgradability and unreparibility rumors, delayed delivery, and 1st generation hardware issues especially the lack of Optical drive made me reconsider my decision of buying one.
I want to know whether I can go for the top model of Non Retina - 2.6Ghz 8GB RAM 750 GB 1 GB Nvidea as an alternate choice for Retina MBP pro or NOT ?
I wanted to buy the Retina Base model. Though it is very recently launched and there is a big risk buying it because they say it is unrepairable and unfixable as 'everything is glued into the motherboard' dialogue scares me. Something goes wrong after purchase and they send it back to US, is what the Apple officials said. Moreover they don’t keep one on a demo at Apple stores in kolkata. I have searched almost everywhere and have been to many resellers in my city but no use.
NOW,I am very sceptical about custom ordering a Macbook 15 non retina with High-Res 1680X1050p from US.I don’t know how much custom duty or expenses I have to pay and is it safe or not. Time is also a factor. Sadly, I have to buy one in Kolkata (my city) it seems.
I am opting for Macbook Pro 15,2.6 Ghz,8GB RAM. Buying it for the sole purpose of editing(audio, video, photos).I need something which is fast along with a good screen size. My original decision was to buy the 17inch but after the launch of Retina and the upgraded 15 inch, I am only looking forward to the upgraded models. Many say 13 inch is fast, but it features a dual core with a maximum of 2.9Ghz clockspeed. I on the other hand want a quad core i7 with good upgradability options and a good screen size. The 13 inch may be a favorite for many, but I want nothing less than a 15 inch. One good option I get with non Retina 15 is its upgradability, while many say Retina MBP 15 can be made upgradable in future but that time is yet to come and by the time the whole web becomes ‘retina friendly’ and all applications supporting its 2880X1800 resolution, I may end up waiting only. Yes the picture quality remains unbeatable when compared to Retina Pro and it will always be. Though friends, I am a student, I want something which is fast, can run almost anything and future dependable. Retina Mac book Pro in India is 2799 USD - Base model. I cannot pay that amount just for the screen. As far as speed is concerned, I plan to get an OWC SSD and a 16 GB OWC RAM in the future resulting in greater speed when comparing the configuration with Retina 15.That problem is solved.
My problem here is this: The web is filled with reviews and videos of Retina Macbook Pro and the upgraded Macbook Pro 15 is just no where, if you even find a few videos, they only feature unboxing videos of Macbook pro 15 (i7-2.3Ghz-4GB-500GB-500MB Nvidea).Other videos compare the 2.3ghz model with Retina 15 pro. They are not elaborate like the 15 Retina Pro reviews.
I want to know about the real performance, potential, pros, cons of Macbook Pro 15 (i7 2.6Ghz 8GB RAM 750 GB 1GB Nvidea graphics).
So my question to you is what is your opinion on the 15 inch non retina ? HOW FAST do you think is the new upgraded 15inch non retina i7-2.6Ghz-8GB-750GB model really is ?I have read on many mac forums and seen on a particular youtube video that 15inch 2.3Ghz model takes an alarming 40 seconds to start because of traditional hard drive ! A normal DELL Inspiron starts at 15 secs max with i3+4 GB RAM and this particularly confuses me about the whole quad core processing and stuff and speed when running applications like C6,FCP,Lightroom etc is to be determined in regard to the model I want to buy.
A. Is it necessary to buy APPLE CARE WARRANTY when buying a laptop from Apple. What are the benefits and how is it different form the normal customer care ?
B. Please enlighten me on some nice headphones from Sennheizer under 90 USD.I am considering Sennheiser HD 439.I am not a bass freak and I want something to use for listening to voice, loud clear. In short, a headphone for all purpose. I heard the HD 449 is not that good compared to HD 439.They say it is Jazz oriented. Another confusion !
Finally, If you know anyone who knows about this configuration (15inch 2.6 8GB RAM 750GB) and its performance than please help me out my friends. Any small detail, input, you feel like please let me know. Please help me be sure and satisfied am buying my Macbook Pro very soon and I am awaiting your response.

Well, are you talking about a 750 Hard Drive or SSD? If SSD (quite expensive) it will certainly be as fast. One option is to get the smallest HD they have and with the Non Retina you can upgrade the HD to an SSD later or now but save a little money. Check with iFixit or OWC for instructions. HD's do take longer to start up and load, but once open, the processor and video work just the same as on the Retina model. The SSD speed is nice, but really not critical. So you have to wait a minute for your computer to boot up. The other big question is you need to find out if the non-retina model will take 16GB of ram. According to OWC's site, it will, 16GB for 150USD. Once you get programs open and resident in ram, everything will fly.

How to Improve the Performance of SQL Server and/or the hardware it resides on?

There's a particular stored procedure I call from my ASP.NET 4.0 Web Forms app that generates the data for a report. Using SQL Server Management Studio, I did some benchmarking today and found some interesting results:
FYI SQL Server Express 2014 and the same DB reside on both computers involved with the test:
My laptop is a 3 year old i7 computer with 8GB of RAM. It's fine but one would no longer consider it a "speed demon" compared to what's available today. The query consistently took 30 - 33 seconds.
My client's server has an Intel Xeon 5670 Processor and 12GB of RAM. That seems like pretty good specs. However, the query consistently took between 120 - 135 seconds to complete ... about 4 times what my laptop did!
I was very surprised by how slow the server was. Considering that it's also set to host IIS to run my web app, this is a major concern for me.
If you were in my shoes, what would be the top 3 - 5 things you'd recommend looking at on the server and/or SQL Server to try to boost its performance?
Robert

What else runs on the server besides IIS and SQL ? Is it used for other things except the database and IIS ?
Is IIS causing a lot of I/O or CPU usage ?
Is there a max limit set for memory usage on SQL Server ? There SHOULD be and since you're using IIS too you need to keep more memory free for that too.
How is the memory pressure (check PLE counter) and post results.
SELECT [cntr_value] FROM sys.dm_os_performance_counters WHERE [object_name] LIKE '%Buffer Manager%' AND [counter_name] = 'Page life expectancy'
Check the error log and the event viewer maybe something bad there.
Check the indexes for fragmenation, see if the statistics are up to date (and enable trace flag 2371 if you have large tables > 1 million rows)
Is there an antivirus present on the server ? Do you have SQL processes/services/directories as exceptions ?
There are lot of unknowns, you should run at least profiler and post results to see what goes on while you're having slow responses.
"If there's nothing wrong with me, maybe there's something wrong with the universe!"

How to improve the performance of adobe forms

Hi,
Please give me some suggestions as to how to improve the performance of adobe form?
Right now when I' am doing user events it is working fine for first 6 or 7 user events. From the next
one it is hanging.
I read about Wizard form design approach, how to use the same here.
Thanks,
Aravind

Hi Otto,
The form is created using HCM forms and processes. I' am performing user events in the form.
User events will doa round trip, in which form data will be sent to backend SAP system. Processing will
happen on the ABAP side and result will appear on the form. First 6 or 7 user events works correctly,
the result is appearing on the form. Around 8 or 9th one, the wait symbol appears and the form is not
re-rendered. The form is of size 6 pages. The issue is not coming with form of size 1 page.
I was reading ways to improve performance during re-rendering given below.
http://www.adobe.com/devnet/livecycle/articles/DynamicInteractiveFormPerformance.pdf
It talks about wizard form design approach. But in SFP transaction, I am not seeing any kind of wizard.
Let me know if you need further details.
Thanks,
Aravind

How to measure memory consumption during unit tests?

Hello,
I'm looking for simple tools to automate measurement of overall memory consumption during some memory-sensitive unit tests.
I would like to apply this when running a batch of some test suite targetting tests that exercise memory-sensitive operations.
The intent is, to verify that a modification of code in this area does not introduce regression (raise) of memory consumption.
I would include it in the nightly build, and monitor evolution of summary figure (a-ah, the "userAccount" test suite consumed 615Mb last night, compared to 500Mb the night before... What did we check-in yesterday?)
Running on Win32, the system-level info of memory consumed is known not to be accurate.
Using perfmon is more accurate but it seems an overkill - plus it's difficult to automate, you have to attach it to an existing process...
I've looked in the hprof included in Sun's JDK, but it seems to be targetted at investigating problems rather than discovering them. In particular there isn't a "summary line" of the total memory consumed...
What tools do you use/suggest?

However this requires manual code in my unit test
classes themselves, e.g. in my setUp/tearDown
methods.
I was expecting something more orthogonal to the
tests, that I could activate or not depending on the
purpose of the test.Some IDEs display mmeory usage and execution time for each test/group of tests.
If I don't have another option, OK I'll wire my own
pre/post memory counting, maybe using AOP, and will
activate memory measurement only when needed.If you need to check the memory used, I would do this.
You can do the same thing with AOP. Unless you are using an AOP library, I doubt it is worth additional effort.
Have you actually used your suggestion to automate
memory consumption measurement as part of daily builds?Yes, but I have less than a dozen tests which fail if the memory consumption is significantly different.
I have more test which fail if the execution time is siginificantly different.
Rather than use the setUp()/tearDown() approach, I use the testMethod() as a wrapper for the real test and add the check inside it. This is useful as different test will use different amounts of memory.
Plus, I did not understand your suggestion, can you elaborate?
- I first assumed you meant freeMemory(), which, as
you suggest, is not accurate, since it returns "an
approximation of [available memory]"freeMemory gives the free memory from the total. The total can change so you need to take the total - free as the memory used.
- I re-read it and now assume you do mean
totalMemory(), which unfortunately will grow only
when more memory than the initial heap setting is
needed.more memory is needed when more memory is used. Unless your test uses a significant amount of memory there is no way to measure it reliably. i.e. if a GC is perform during a test, you can have the test appear to use less memory than it consumes.
- Eventually, I may need to inlcude calls to
System.gc() but I seem to remember it is best-effort
only (endless discussion) and may not help accuracy.if you do a System.gc(); followed by a Thread.yield() at the start it can improve things marginally.

How to auto update JTable during runtime

Can anyone tell me how to dynamically update a JTable during execution, what i mean isin the I want the table to automatically add new rows as i enter new data.
if I pass the object array reference of the TableModel to a method, then add more objects to the array and the revalidate the JTable will it work, or how do I do it ? Thanks

Your table model should extend AbstractTableModel. And when (for example) it adds a row to whatever data structure is supporting the model, it should call fireTableRowsInserted... you can find out more about those methods in the API documentation. You don't need to revalidate or invalidate or validate the JTable, at least I don't have that in my code anywhere.

How to Improve the performance in Variable Selection Screen.

Hi,
In Query Level we have Variable " User entry Defalt Valu". User want select particular value when he press "F4" it's take hours time how to improve the performance in Varaible Selection Screen.
Thanks in Advance.
Regards,
Venkat.

Dear Venkat.
You please try the following steps:
1. Say the InfoObject is 0EMPLOYEE against which you have created the variable, which user is trying to select value against, when they execute the report.
2. Goto RSA1-> InfoObject tab-> Select InfoObject 0EMPLOYEE.
3. Selcet the following options:
Query Execution Filter Val. Selectn - 'Only Posted Value for Navigation'
Filter Value Repr. At Query Exec. - 'Selector Box Without Values'
Please let me know if there is any more issue. Feel free to raise further concern
Thnx,
Sukdev K

Trigger compiles but errors out during execution

You guys wouldn't like this. Its about a trigger !
Below is a trigger i've found in OTN. I've a similair requirement. The below trigger will compile . But, during execution i get
ORA-00936: missing expression during executionI have this feeling that the last line in the INSERT statment is causing the issue.
create or replace trigger trg_test
before insert or update on central_dtls.emp_config
for each row
declare
v_schema varchar2(100);
v_sql_stat varchar2(32767);
begin
select schema_name into v_schema from central_dtls.master_config where company_id= :new.id;
                              v_sql := 'insert into ' ||v_schema||'..emp_config_local
                              company_id,
                              values
                               ||:new.col1||', '
                               ||:new.col2||', '
                               ||:new.lastcol|| ')';    ----- Potential issue in this line
exception
when others then ......;
end;
/I've tried the below things.
||:new.lastcol ');';   --- Trigger Will not compile
||:new.lastcol|| ')';    --- Trigger Will compile , but, will get "ORA-00936: missing expression" during execution
||:new.lastcol|| ');';   --- Trigger Will compile , but, will get "ORA-00936: missing expression" during execution

You have:
                              v_sql := 'insert into ' ||v_schema||'..emp_config_local Try with:
                              v_sql := 'insert into ' ||v_schema||'.emp_config_local (only one dot between schema and table name :) )

S_ALR_87013531 how to increae its performance during execution

Similar Messages

Maybe you are looking for