[S]bad perf b/c (lack of fine-tuning)/(wrong governor)/(redundancy)?

hiho,
my hardinfo benchmark results:
CPU Blowfish
CPU Blowfish
This Machine 800 MHz 7,602
Intel(R) Celeron(R) M processor 1.50GHz (null) 26.1876862
PowerPC 740/750 (280.00MHz) (null) 172.816713
CPU CryptoHash
CPU CryptoHash
This Machine 800 MHz 174,422
CPU Fibonacci
CPU Fibonacci
This Machine 800 MHz 2,989
Intel(R) Celeron(R) M processor 1.50GHz (null) 8.1375674
PowerPC 740/750 (280.00MHz) (null) 58.07682
CPU N-Queens
CPU N-Queens
This Machine 800 MHz 8,889
FPU FFT
FPU FFT
This Machine 800 MHz 3,354
FPU Raytracing
FPU Raytracing
This Machine 800 MHz 5,728
Intel(R) Celeron(R) M processor 1.50GHz (null) 40.8816714
PowerPC 740/750 (280.00MHz) (null) 161.312647
system:
Processor 2x Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
Memory 3081MB (692MB used)
Operating System Arch Linux
User Name sepp (Sebastian)
Date/Time Mo 05 Dez 2011 18:39:33 CET
Display
Resolution 1680x1050 pixels
OpenGL Renderer Unknown
X11 Vendor The X.Org Foundation
Multimedia
Audio Adapter HDA-Intel - HDA Intel
Input Devices
AT Translated Set 2 keyboard
Sleep Button
Lid Switch
Power Button
Video Bus
PC Speaker
HP WMI hotkeys
ST LIS3LV02DL Accelerometer
SynPS/2 Synaptics TouchPad
CKF7063
HDA Digital PCBeep
Logitech USB Receiver
Logitech USB Receiver
Printers
No printers found
SCSI Disks
ATA TOSHIBA MK3252GS
TSSTcorp CDDVDW TS-L633M
Operating System
Version
Kernel Linux 3.1.4-1-ARCH (x86_64)
Compiled #1 SMP PREEMPT Tue Nov 29 08:55:45 CET 2011
C Library GNU C Library version 2.14.1 (stable)
Default C Compiler Unknown
Distribution Arch Linux
Current Session
Computer Name alnb
User Name sepp (Sebastian)
Home Directory /home/sepp
Desktop Environment Unknown (Window Manager: Mutter)
Misc
Uptime 1 hour, 37 minutes
Load Average 0,00, 0,00, 0,00
Kernel Modules
Loaded Modules
cryptd Software async crypto daemon
aes_x86_64 Rijndael (AES) Cipher Algorithm, asm optimized
aes_generic Rijndael (AES) Cipher Algorithm
ipv6 IPv6 protocol stack for Linux
fuse Filesystem in Userspace
microcode Microcode Update Driver
coretemp Intel Core temperature monitor
snd_hda_codec_analog Analog Devices HD-audio codec
uvcvideo USB Video Class driver
videodev Device registrar for Video4Linux drivers v2
media Device node registration for media drivers
v4l2_compat_ioctl32
radeon ATI Radeon
joydev Joystick device interfaces
snd_hda_intel Intel HDA driver
arc4 ARC4 Cipher Algorithm
ttm TTM memory manager subsystem (for DRM device)
iwlagn Intel(R) Wireless WiFi Link AGN driver for Linux
snd_hda_codec HDA codec core
snd_hwdep Hardware dependent layer
snd_pcm Midlevel PCM code for ALSA.
iTCO_wdt Intel TCO WatchDog Timer Driver
hp_accel Glue between LIS3LV02Dx and HP ACPI BIOS and support for disk protection LED.
lis3lv02d ST LIS3LV02Dx three-axis digital accelerometer driver
hp_wmi HP laptop WMI hotkeys driver
drm_kms_helper DRM KMS helper
drm DRM shared core routines
iTCO_vendor_support Intel TCO Vendor Specific WatchDog Timer Driver Support
evdev Input driver event char devices
psmouse PS/2 mouse driver
sparse_keymap Generic support for sparse keymaps
mac80211 IEEE 802.11 subsystem
cfg80211 wireless configuration support
sky2 Marvell Yukon 2 Gigabit Ethernet driver
i2c_algo_bit I2C-Bus bit-banging algorithm
rfkill RF switch support
i2c_core I2C-Bus main module
snd_timer ALSA timer interface
snd Advanced Linux Sound Architecture driver for soundcards.
soundcore Core sound module
serio_raw Raw serio driver
intel_agp
container ACPI container driver
intel_gtt
pcspkr PC Speaker beeper driver
wmi ACPI-WMI Mapping Driver
snd_page_alloc Memory allocator for ALSA system.
input_polldev Generic implementation of a polled input device
video ACPI Video Driver
fan ACPI Fan Driver
thermal ACPI Thermal Zone Driver
battery ACPI Battery Driver
ac ACPI AC Adapter Driver
button ACPI Button Driver
cpufreq_powersave CPUfreq policy governor 'powersave'
cpufreq_ondemand 'cpufreq_ondemand' - A dynamic cpufreq governor for Low Latency Frequency Transition capable processors
acpi_cpufreq ACPI Processor P-States Driver
freq_table CPUfreq frequency table helpers
processor ACPI Processor Driver
mperf
usbhid USB HID core driver
hid
vfat VFAT filesystem support
fat
ext4 Fourth Extended Filesystem
jbd2
crc16 CRC16 calculations
ext2 Second Extended Filesystem
mbcache Meta block cache (for extended attributes)
uhci_hcd USB Universal Host Controller Interface driver
ehci_hcd USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore
sr_mod SCSI cdrom (sr) driver
cdrom
sd_mod SCSI disk (sd) driver
ahci AHCI SATA low-level driver
libahci Common AHCI SATA low-level routines
libata Library module for ATA devices
scsi_mod SCSI core
Boots
Boots
Mon Dec 5 1177:0 33..1.4-1-ARCH|-
Mon Dec 5 1144:4 33..1.4-1-ARCH|-
Sun Dec 4 1199:2 33..1.4-1-ARCH|-
Sun Dec 4 1199:2 33..1.4-1-ARCH|-
Sun Dec 4 1177:4 33..1.4-1-ARCH|-
Sun Dec 4 1144:1 33..1.4-1-ARCH|-
Sun Dec 4 1144:0 33..1.4-1-ARCH|-
Sun Dec 4 1133:4 33..1.4-1-ARCH|-
Sat Dec 3 1122:3 33..1.4-1-ARCH|-
Languages
Available Languages
de_DE German locale for Germany
de_DE@euro German locale for Germany with Euro
de_DE.iso88591 German locale for Germany
de_DE.iso885915 German locale for Germany with Euro
de_DE.utf8 German locale for Germany
deutsch German locale for Germany
en_US English locale for the USA
en_US.iso88591 English locale for the USA
en_US.utf8 English locale for the USA
Filesystems
Mounted File Systems
udev /dev 0,00 % (10,0 MiB of 10,0 MiB)
/run /run 2,70 % (9,7 MiB of 10,0 MiB)
/dev/sda3 / 29,00 % (16,3 GiB of 22,9 GiB)
shm /dev/shm 0,04 % (1,5 GiB of 1,5 GiB)
tmpfs /tmp 0,00 % (1,5 GiB of 1,5 GiB)
/dev/sda4 /home 5,69 % (251,6 GiB of 266,7 GiB)
/dev/sda1 /boot 25,22 % (68,1 MiB of 91,0 MiB)
Display
Display
Resolution 1680x1050 pixels
Vendor The X.Org Foundation
Version 1.11.2
Monitors
Monitor 0 1680x1050 pixels
rc.conf:
MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave)
DAEMONS=(!hwclock syslog-ng @network @netfs @crond @dbus gdm @cpufreq @acpid laptop-mode @sensors @microcode)
its strange that the cpu has only 800MHz during the bench.
my ondemand threshold: 95
does the bench cause less then 95%?
Last edited by b0b2 (2011-12-07 14:17:41)

sonoran wrote:
While I ran the benchmarks gkrellm showed my cores running at 3200MHz,
yet the hardinfo results never reported higher than 2500MHz.
This on a 3x AMD AthlonII X3 450, modules powernow_k8 and cpufreq_ondemand.
Stepping is 800-2000-2500-3200. Threshold is the default 95%.
I don't think hardinfo is reporting cpu frequency correctly.
Aha. Check out this bug from the hardinfo site:
http://bugs.hardinfo.org/showreport.php?bugid=48
This is a known bug. If you're using cpufreq with the ondemand governor, then the tests will be performed at 3GHz on your machine, as they're quite CPU intensive and the governor will automatically pump out more juice to the CPU.
However, HardInfo only measures the CPU speed once, and that's the speed it displays on the benchmark window.
Oh thank you for the answer, good Sir!
Can you answer the 3rd question?: do you really need laptopmodetools, acpi, cpufreq & acpid? or could i deinst one of them?

Similar Messages

Fixing Radio: Fine tuning songs (Hits, Variety or Discovery Mode)

Our radio has always been weird, you never know what songs it plays, and it always REPEATS THE SAME GOD darn SONG over the past hour.
It's time to fix it.
If you've tried, or at least clicked into an app of a competing service, this is how it looks like:
You can kinda tune the station to WHAT YOU LIKE, for eg, Hits, Variety, or Discovery and the radio will adapt what you want to hear.
Here's another example (A not very solid example though):
As you may know, Echo Nest is now a Spotify company, anyway, this shows the radio where you can slide to whether artist only or discovery in general (This might not be a good example, as if I just wanted to listen to the artist, I would've just went into the artist page and click on Shuffle Play.)
Here's another example:
This is a relatively new music service, but if you've tried its radio, you wil find out that its really really spectacular. You can tell the service what is your mood and it plays songs based on that, but if that's not enough. It actually has brand new algorithms that is built just for this, I read somewhere that it even monitors your location, the songs you play in that location/event, the volume the song is playing and when you hit the radio mode, it will analyze all of this algorithms and play based on that.
So the radio needs improvements in its really bad algorithms and a fine tuning option.
PS: If you go the comments section of this idea, in page 2, bought up a really good visual of a competing music service vs Spotify when using the radio, if you've time you should take a look and if possible share more of the problems that you face with Spotify Radio.

"Improving Station" is a joke. I have a station based on Laura Nyro. I keep getting the same very popular Nyro songs (but even that rarely) and some other 60s, 70s, 80s female vocalists. Nothing newer. I also get a ton of stuff nothing like Nyro, including male vocalists and male bands. How many times do I reject anything of Elvis Costello before you stop playing it? Same for many other artists. You really need to track that if someone has rejected every one of an artist, quit playing that artist. Or, better, provide as has been suggested elsewhere here, a button "reject artist." I've nothing against Costello, or Lightfoot, or the Doobies, or Bread, or many of the artists you put forth on my Nyro station. I just don't want anything besides lilting female vocalists on my Nyro station. (As well as much more Nyro.) Your learning algorithms are a joke, song by song is useless-- I have to come running back to the computer to keep rejecting stuff, even though I've been trying to "improve" the station for weeks.

Aperture 3 with Nikon D90 - How should raw fine tuning look like?

I try to trouble shoot my Aperture 3 (trial) installation. I have some troubles with the raw fine tuning controls and after reading the manual (again) I noticed that the fine tuning controls I get for my D90 are different from the ones displayed in the manual.
I get boost, hue boost / sharpening, edges / moire, radius, noise-reduction sliders.
In the manual there is no noise-reduction slider, just a check box for Auto Noise Compensation.
I got that control in Aperture 2, but not in Aperture 3. Now I’m wondering if something went wrong with my Aperture 3 installation. That would explain the problems I have with raw fine tuning. But before I try a complete clean install of my Mac i would like to know if I get the right raw fine tuning controls in Aperture 3.
Does anybody use Aperture 3 and a Nikon D90 and could tell me how the raw fine tuning controls he gets in Aperture 3 look like?
Thanks.

Greetings, First be sure you have your d7100 properly set to take maximum detail NEF images.
Go to your d7100 shooting menu and choose NEF (Raw) recording > Type
Choose N Lossless Compressed
Then go to NEF (RAW) Recording > NEF (RAW) Bit depth
Choose 14 bits
You were given good advice that you should not mess with the raw fine tuning brick in Aperture 3.6
Your d7100 has a default RAW import preset - make sure you have somehow not changed that Apple Aperture coded
raw fine tuning preset - this could make all your images far less sharp on import. You can easily revert to the Aperture 3.6 raw import brick default for the d7100 if you have somehow changed it by error. And always be sure to use your Aperture loupe or full screen viewer when applying any adjustment bricks.
Finally be sure that you understand the differences between the Sharpen adjustment and the Edge Sharpen adjustment. Both of these are very sensitive and very different sharpening tools. I do not shoot with a d7100, but use other Nikon FX DSLR's and I have never felt that any of my NEF imports lacked either Sharpness or Edge Sharpness given the Apple Aperture default raw image digital converters for each particular Nikon body. Good luck.

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?

That's a comment in the file. It has no effect at all.

Small fine tuning is required in the calculation

Hi Gurus,
   BI PM module for the report Schedule attainment filtered for one order.
The result supposed to be Total job scheduled = 1, completed orders = 1 and No of orders completed on Schedule = 0. However, the report shows, Total job scheduled = 7, completed orders = 1 and No of orders completed on Schedule = 0.
   By this what happens is that total jobs scheduled become 930 for Plant = 2200, Planner Group = P01, Order Type = PM03 while Completed orders and Completed orders on Schedule is correct.
    ie Formulae in update routine IF( IS_INITIAL( /BIC/ZIBFDCH ), 1, 0 ).
    Please tell the small fine tuning in the calculation, points will be assigned.
Regards,
Kiran A

Answer Finded

Configurable Code-list not Extendable in Fine-Tuning.

Hi
I am facing some problems while changing the values in Code-list while using fine tuning process in Configuration. I have created three code-lists and then being added to configuration using BAC.
In this BAC I have created one business Topic and three separate business options. Each business option is linked with each bcc (business Configuration Set).
Now when I go to and “Edit project scope” I am able to get the code list on my UI using extension fields and values are there too. But the problem I am facing is that in “Open Activity list” when I open the Business Options NOT all the options are opening properly.
Although I have got some of them opening fine and let me make changes while others are showing errors.
Any Advice Please.
Many thanks in Advance.
Regards
Asad

Yes i have regenerated now and still the same problem is there.
Yes the flag has been selected in the BC SET.
in Fine tuning there is slight difference in BOTH BC views.
One with normal behavior only shows the code in code list while the one with Issues/Problems is showing code & Description in same CODE column while some Times it does show only code though??
Any guess here?
Regards
Asad

Few Methods of fine tuning query

I want to know few methods of fine tuning the query

http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96533/toc.htm

Fine-Tuned Control: Purchase Order

Hello
When I make : SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define message type for purchase order->Fine-Tuned Control: Purchase Order
What means the U=>Update print-dependent data
Somebody could tell when I can use it, and tell me the impact of this.
Thanck you very much for your help.

Hi,
If you select this indicator "Update print-dependent data" under Fine-Tuned Control option then in PO, if you click on "Print Preview" button then system will not show the pop-up screen (which contains all the print parameters, default printer, Logical destination, etc...). And system will consider the output type as default for print preview for which "Update print-dependent data" is marked.

Raw Fine Tuning 2.0 not available?

I'm using the Trial version of Aperture 2.1.2 and tried editing FujiFilm FinePix S2 Pro raw images. For Raw Fine Tuning, only versions 1.0 and 1.1 could be selected (and thus sliders such as "Recovery" are unavailable). I did a Software Update (which installed Raw Converter 2.5), and I restarted my system. No apparent change: only 1.0 and 1.1 are the choices.
Does this mean that Raw Fine Tuning 2.0 is not available for FinePix S2 Pro raw images?

Perhaps...
I can understand if Apple chooses not to support or to discontinue support for a particular image type, especially given the Fuji circumstances. And I appreciate the ability to do a 30-day free trial. I guess where I got a little irked is that I had to spend time troubleshooting a problem I thought should have been documented (it is not a bug; it was a decision that affects the availability of product features).
Thanks for the replies, Brian.

Latest batch of RAW files has all the raw fine tuning options greyed out

I shoot about 1000 images a week with my 40d and edit/organize all of them in Aperture... the latest batch (a pretty important batch at that) of 800 or so imported fine but does not allow me to use the 'Raw Fine Tuning' options as if they are JPGs. I can still go to the images i imported last week and the RAW fine tuning works fine, even some in the same album... any ideas?
Aperture 1.5.6

more informaion:
today's images imported fine, so you can rule out the security patch.
even more peculiar i exported some of the images, and imported the same masters back in and much to my suprise the RAW fine tuning works. I rebuilt the library hoping that would help but it didn't, I'm just going to go back through the library and re-tag and rate my picks from the shoot, but any idea on how to keep this from happening again? it has to be some wacky setting or something, I can export the broken image and the import it again and it works fine.
any help would be appreciated
mark

RAW Fine tuning

The RAW Fine tuning options are not showing up in my adjustments hud. I have Aperture 1.5.6. I can't find a way to add this to my adjustments hud. How can I add this?

What camera are you using? I don't think that Aperture supports raw fine tuning for every camera—only those with optimized support.
Cheers,
Andreas

Fine tuning with 3D roatation tool?

Hi,
I'm wondering if there is (and I feel there HAS to be) a way to fine tune movements with the 3D rotation tool. Using the mouse works to an extent, but just like nudging movements with the arrow keys, it's sometimes impossible to get the placement I want with mouse dragging. I'm pretty new to using these tools so maybe it's super obvious and I'm missing it?
Thanks!

Use the Motion Editor to do some great fine tuning. You can adjust each property separately and it will give you much better control.

Windows Operating system Fine tuning for Hyper-v 2012 role

Hi Team,
we are installling windows 2012 Hyper-v in GUI Mode in Datcenter Edition. i have 5 host and each carrying 128 GB of RAM with 600 GB of RAID harddisk.
please let me know if we have any fine tuning guide for windows 2012 OD to host hyper-v role which can guide the Virtual/Page file memory, partion size and etc.
Ravi

Hi,
Also you can refer the following KB it have a checklist about optimizing Hyper-V environment:
Checklist: Optimizing Performance on Hyper-V
http://msdn.microsoft.com/en-us/library/dd722835(v=bts.10).aspx
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Customising the RAW fine tuning as default for importing. In Aperture 3

RAW Fine Tuning.
I use a Canon G11 PowerShot camera.
I’m being unsuccessful customising the RAW fine tuning as default for importing new files, so each new RAW file imported come into Aperture 3 with the changes from the Apple default.
All I want to do is: reduct the boost from 1.0 to 0.5 and Hue Boost from 1.0 to 0.5.
I made the said changes by moving the sliders.
Then from the cog wheel (in RAW fine tuning) click on save as preset ( give it a name )
I now see it in the list , I click on it - click save as camera default - it now say camera default next to my custom settings.
However when I import new RAW files into Aperture 3, it imports the file with the Apple settings not my custom settings that are marked with camera default.
NB, I had not problem changing the above in Aperture 2 - I have done it before and I believe I have gone through the procedure correctly
Can anyone please help
Thanks Martin

Hi Matthew
What I'm doing is: setting the RAW fine tuning camera default ( to my custom settings) , so all new files being imported into Aperture 3 will take my custom settings as they are imported into Aperture 3.
I did this will Aperture 2 without any trouble . now I have upgraded to Aperture 3 the RAW fine tuning camera default is Apples and I have to change it from Apples to my custom preset.
It shows I have changed the RAW camera default to my custom settings in the drop down list but when I import files - they take the Apple preset not my custom settings ? ?
Martin

RAW Fine Tuning Engine with 5D mark II - Aperture 3

When comparing the raw fine tuning engine btw AP3 and AP2, I noticed that there are different...I have the feeling the settings on AP3 are too strong
Anyone noticed the same ?
Thanks
Vadim

Oh I see. Can't comment any further then since I don't own a 5D mk2.
But FWIW my D700 files are not that much different.

[S]bad perf b/c (lack of fine-tuning)/(wrong governor)/(redundancy)?

Similar Messages

Maybe you are looking for