S_CTS_ADMI Authorization issue

Hi Experts,
Every now and again a user sends me a SU53 with the error requesting access to S_CTS_ADMI field TABL. The user of this morning is trying to release a purchase order using transaction ME29N. Why would the SU53 indicate that the user want to maintain the control tables of the Change and Transport System in Production when they are trying to release a purchase order? I am running a trace ST01 but it's not helping.
Could you please help me to resolve issue.
Thanks
Pavel

Hi
Gowri is perfectly ok. Below Objects checked.
M_BEST_BSA
M_BEST_EKG
M_BEST_EKO
M_BEST_WRK
Along with that M_EINK_FRG also get checked.
Check for access to all of the above Objects in user master records. Before that check with MM team to get these values of the PO that the approver is trying to release.
1) Document Type : Relate with M_BEST_BSA
2) Purchasing Group : Relate to M_BEST_EKG
3) Purchasing Organization : Relate to M_BEST_EKO
4) Plant : Relate to M_BEST_WRK
5) Release code & release Group : Relate to Object M_EINK_FRG
You also can get these information through ME23N
If all of the above matches with user master record and PO then there is no further authorization issue. Rest on MM team !!!!!
Best of luck...
Arpan

Similar Messages

Authorization Issues - Apple, please help

There have been several posts regarding users not being able to play their iTunes music due to authorization issues. Solutions have been provided, including the following:
1. Deauthorizing the account several times until the following message appears "This computer was not authorized. To authorize this computer, to play a song or video you have purchased using this account."
2. Deleting the "SC info" folder.
3. Authorizing the music using the original account (File > Get Info).
Nothing seems to be working. I've contacted Apple support, and they have been more than responsive and helpful, but they keep asking me to do the same things over, and over.
Everytime I enter my account authorization info, I get a message indicating that the computer is now authorized...however, the music still won't play.
I have now gone 3 months without being able to solve this issue (I've tried everything in the forums), and I am about to give up. Unfortunately, this also means flushing over $300 down the toilet. I still have all the files, so I am not asking to download them again (they are on my hard drive). I just want a fix...

Hi,
For the BW consultant use the following objects :
B_ALE_MAST
S_ADMI_FCD
S_APPL_LOG
S_ARCHIVE
S_BDS_DS
S_BTCH_ADM
S_BTCH_JOB
S_BTCH_NAM
S_CTS_ADMI
S_C_FUNCT
S_DATASET
S_DEVELOP
S_DOKU_AUT
S_FIELDSEL
S_FOBU_MTH
S_GUI
S_IDOCCTRL
S_IDOCDEFT
S_IDOCMONI
S_IDOCPART
S_IDOCPORT
S_LDAP
S_LOG_COM
S_OC_DOC
S_OC_FOLCR
S_OC_ROLE
S_OC_SEND
S_OC_TCD
S_PROGRAM
S_PROJECT
S_QUERY
S_RFC
S_RS_ADMWB
S_RS_COMP
S_RS_FOLD
S_RS_HIER
S_RS_ICUBE
S_RS_IOBJ
S_RS_IOMAD
S_RS_ISET
S_RS_ISOUR
S_RS_ISRCM
S_RS_MPRO
S_RS_ODSO
S_RZL_ADM
S_SCD0
S_SCRP_ACT
S_SCRP_FRM
S_SCRP_GRA
S_SCRP_STY
S_SCRP_TXT
S_SPO_ACT
S_SPO_DEV
S_SPO_PAGE
S_TABU_CLI
S_TABU_DIS
S_TABU_RFC
S_TCODE
S_TMS_ACT
S_TOOLS_EX
S_TRANSLAT
S_TRANSPRT
S_TWB
S_USER_AGR
S_USER_AUT
S_USER_GRP
S_USER_PRO
S_USER_TCD
S_USER_VAL
S_WFAR_OBJ
S_WFAR_PRI
For users :
S_ADMI_FCD
S_BDS_D
S_BDS_DS
S_GUI
S_OLE_CALL
S_RFC
S_RS_COMP1
S_RS_FOLD
S_RS_HIER
S_RS_ICUBE
S_RS_ISET
S_RS_ODSO
S_SPO_DEV
S_TCODE
S_USER_AGR
You also need to give the end user objects to the BW consultant. All of these objects have activities and values that need to be populated.
Cheers,
Kedar

Secured WebDAV Mounted Volume Authorization Issues

I use a secure WebDAV mounted volume from myDisk.se and up until the latest Security Update have had zero issues being able to manipulate files and folders as I would on a normal volume. However, since the installation of the Security Update (2009-004 (PowerPC) 1.0) I find weird things happening with this mounted volume:
1) I am able to mount the secured WebDAV share using my security credentials.
2) I can create a default "untitled" folder but when I try to change its name, the WebDAV authorization dialog pops up and despite entering the same credentials (why, I am not sure as the volume has already been properly credentialed in order to be mounted), access is denied.
3) Trying to create a file within a folder on the mounted WebDAV volume I previously created pre-update causes the same authorization issue.
I have no other WebDAV shares I can try to mount from any other companies so I am not sure if this is a myDisk issue or one borne from the Security Update. I am not a .Mac/MobileMe user and that info is not filled out in System Preferences. The internal hard drive has been meticulously maintained with Disk and Permissions repair being run both before and after each and every software update installed. Likewise, the volume's structure is also checked both before and after and shows no need for repairs.
Any ideas? Perhaps there is a corrupted file somewhere that's affecting the authorizations needed by this third-party WebDAV volume?
The machine that has this problem is the last model iBook G4/1.33GHz 12" display, 1.5GB RAM, and a 100GB 5400rpm HD which replaced the stock OEM 40GB 4200rpm drive about one year ago.
I'm not willing to do an Archive and Install at this point as the loss of the WebDAV access to my online volume is not critical. Inconvenient as heck but not to the point where I'm willing (or able) stop my normal work to spend the hours it will take to get WebDAV access back.
Thanks in advance for any insights.

same problem here with webdav, I can't mount my idisk from university network on Mac Pro 10.5.3 (although it mounts fine from home network on both ibook and PMG5 10.5.3). Everything was fine with 10.5.2 and I already re-installed 10.5.3 combo. Other bugs as well with .Mac prefs (keeps crashing, sometimes it shows the available space on idisk but still no mounting, with error -35 or -8086), but .Mac sync is OK
Jun 11 12:34:21 webdavfs_agent[579]: mounting as authenticated user
Jun 11 12:34:22 kernel[0]: webdav server: http://idisk.mac.com/[username]/: connection is dead
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 received VQ_DEAD event (32)
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 type 'webdav', mounted on '/Volumes/[username]', from 'http://idisk.mac.com/[username]/', dead
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:22 KernelEventAgent[75]: tid 00000000 found 1 filesystem(s) with problem(s)
Jun 11 12:34:22 kernel[0]: webdav_sendmsg: sock_connect() = 61
Jun 11 12:34:52: --- last message repeated 1 time ---

BI 7.0 Analysis Authorization issue: some reports displaying a blank page.

Hi All,
This is regarding BI 7.0 Analysis Authorization issue.
Overview:
we have restricted some queries at infoobject level.
Issue:
a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
d. Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
e. But when we execute the same report with Auditors ID then we get a blank page.
Any idea why this is so?

Hi Neha,
I tried the below also,
GL Acnt
I EQ 0000134010
I EQ :
but still it didn't work.
No Infoobject is missing in Authorization Object.
For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
As mentioned earlier also it is giving me the below message,
""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION RS_EXCEPTION 301CL_RSR_RRK0_AUTHORIZATION AUTHORITY_02"
Kindly suggest, since this is a show-stopper for us!
Thanks,
Ishdeep Kohli.

Variable screen/variant screen authorization issue

HI All,
We have implemented standard Cost Center Overview Report(0SR_C02_Q0002) in BI 7.
We have three selection fields:
1.Company Code which is mandatory
2.My controlling Area which is also mandatory
3.Costcenter which is not mandatory
The requirement we are facing over here is that in the Variable screen/variant screen when I enter a company code, then I need to display dynamically only those "My Controlling Area" values which are assigned to that particular company code and not all. In the same way after selecting the appropriate "My controlling area" value, I need to display only those cost centers in the cost center selection field which are assigned to the selected company code and My controlling area combination and not all.
can anyone guide me on how to go about on this authorization issue at the variable screen itself.
Please treat this issue/requirement on high priority.
Appreciated in advance.
Regards,
raps.

Hi,
I think that an alternative to solve your concern could be using Web Application Designer (WAD). In this respect, there are several design options, with different levels of complexity.
As the simplest alternative, you could create a WAD including your query and three Dropdown Boxes: one for Company, a second for Controlling area and another for Cost center. The four mentioned elements should be linked to the same dataprovider so, when you select a company, the options in the other two Dropdown boxes and the information in the query are updated.
In order to enforce mandatory filter selection at Company and Controlling area level, you should set NO_REMOVE_FILTER='X' in both two Dropdown boxes, so that "All values" option -which would mean no filtering- is not offered.
I hope this helps you.
Regards,
Maximiliano

Authorization issue - help request

Hi guys,
One of the consultants is having an authorization issue ( He is not abele to run a t-code)
I ask him to run a su53 report and i am not sure how to proceed with this.
Please help.
Here are the details from the SU53 report.
DISPLAY AUTHORIZATION DATA FOR USER VYXXXX
User : VYXXX                       profile parameter authorization buffering    4
Authorization Object: F_KNA1_GRP
Description
Authorization check failed:
      + Authorization object F_KNA1_GRP Customer Account Group Authorization
            Activity                                08
            Customer Account Group     ZM01
Users Authorization Data :
      + Authorization object F_KNA1_GRP Customer Account Group Authorization
               Authorization T-PD19002300
              Authorization T-UG39000900
              Authorization T-UG39001000
Please help me guys what need to be performed.
Regards,
Vamsi.

Hi Vamsi,
SU53 shows us the last failed authorization for a user. However, it might not only be the failed authorization object failed.
Hence, "just to learn" , you can use transaction ST01 to enable and run a trace for particular users. Be sure to use in a test environment first, and with proper filters. (for a particular user only).
Then check-> which auth object is failing.
RC=4 means a object value is failing.
RC=12 means an object is missing!
Check, which tcode is calling that object and this tcode is present in which role. Then.........proceed.
You can check the SAP documentation on running traces on the help portal of SAP. I think you will find the answer yourself by troubleshooting more and may be massaging some test roles here and there!
Likewise, if you are new to security, I would encourage you to start by reading some books on SAP security. Authorizations made easy is a good book to start with.
Let me know if you have any questions
EOD for me :P . take care
Abhishek

Authorization issue during Jump

Hi all,
I am faced with an authorization issue when I am jumping from a BW report into an ABAP report in R/3. The particular BW report is built on a Multiprovider and when I jump to the R/3 report it displays a message saying that I have no authorization to display the R/3 report. Now the issue is that when I run the same report on the base infocube and perform the jump there is no problem. It works just fine.
Both the multiprovider and the base infocube have the same authorization objects checked.
Can someone please help?
Regards,
Ashmith Roy

Pls have a look on the below thread:
Authorization by InfoArea
Regards
Ganesh
*Assign points if this helpful

Authorization issue in Info spoke

Hi all,
I am facing some authorization issue when executing info spoke in process chain.
Info spoke is working fine in direct Scheduling (both background and Dialog).
Am getting this error after execution of process chain
"System error: RSDRC / FORM AUTHORITY_CHECK RSDRC / FORM AUTHORITY_CHECK R"
"System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET RSDRC / FUNC RSDRC_B"
"System error: RSDRC / FORM DATA_GET RSDRC / FORM DATA_GET RSDRC / FORM DA"
"Extraction Cube : Error in DataManager API".
I dont know why this problem comes.
Can anyone tel me what went wrong and how to solve it.
Thanks in advance.
Kind regards,
Shanbagavalli.S

Hi All,
The above issue is getting due to # character in text at end(e.g ljdfsaa##). After removing # characters in text issue got resolved.
Thansk,
Manjunatha

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

Authorization issue - need to know the Role providing this access

Hi,
User is facing an authorization issue below:
"You donot have authorization to display DataSource 2LIS_06_INV, Component MM" and
"You donot have authorization to display DataSource 2LIS_11_VAITM, Component SD"
Kindly let me know what Role is missing from the user's profile?
Thanks and Regards,
Sachin
SAP Security Consultant

Hi Murali,
It helped.
I found out the BW Data Support role for the object S_RO_OSOA and when checked it was already in user's profile but the missing part was user Comparision for that role.
I did user comparision and then user is able to view the below DataSources....
Thanks for your help, it triggered to find the root cause.
Thanks
Sachin

Authorization issue to execute query via analyzer

Dear,
We are experiencing an authorization issue that we can not solve...
We have grant to user the expected objects to execute query (S_RS_COMP & S_RS_COMP1) and the central objects like S_GUI, S_USER_AGR.
When we test in RESCEADMIN, everything is fine. We can execute the query.
When we test it in the analyzer, the variable screen does not pop-up and we get the error message:
"There is no variable in the workbook, which allows user input"
Does anybody have a direction to help us to orientate our investigation?
Many thanks,
Rodolphe

Hello,
What is the basic settings you have in the Query Properties basic setting tab
Try making it mandatory
Regards
Nitin Bhatia

Authorization issue to view cube contents

Hi Gurus,
I am getting Authorization issue to view cube contents in Production server, When I execute the cube it is showing me the following statement.
"You do not have sufficient authorization for the infoprovider ZMMG_C05".
Please provide me a possible solution for this.
Thanks,
Jackie.

Hi,
Two things to be checked with respect to authorization for this one.
1) Functional Roles: Check whether Info cube is present in the functional roles that are assigned to you.
                              If not you need to get the functional role in which the Infocube is assigned.
2) Data Access Roles: Check in the data access roles assigned to you, whether you have the access
                                  to the selection that you are using to see the data in the info cube. Else, request
                                  BASIS team to assign the appropriate data access roles to you.
Hope this helps.
Regards,
Bharat

Authorization issue within a table in BI

Hello All,
Here is my authorization issue :
We have set up an authorization on infoobject Zapplication. End user is allowed to choose "HR" only.
In Rsecadmin, infoObject Zapplication is restricted to "HR"
Then, this authorization object has been assigned to end user.
This user go to a specific table to select an application and a date.
When user display the possible value he only see "HR". Which means our authorization is correct.
However, this user can enter another value such as "SD". This value does exist in infoObject Zapplication. So, it means that there is an issue with our authorizations settings.
We have added a control table, it's even worse in this case, authorization are not checked at all and all available values are displayed.
Any idea to prevent the user to entered a value within this table ?
Why our authorization does not check the value entered directly in the table ?
Thanks &
Regards
Cath

Hello
For info we manged to restrict acces on this table by using event table from table maintenance and we have combined it with a specific authorisation object.
Regs
C.

Authorization Issue with ODS

Dear all,
I have an authorization issue with two ODS.
One I activated for BEx reporting --> Is working fine in Dev, but I get error with
missing authorization in QUA, althought some authorizations.
Same issue with a newly created ODS, which works in Dev, but gives an error
with missing authorization in QUA.
What can be the reason for this? Any input is highly appreciated!
Cheers,
Claudia

Hi,
check that the role(s) are transported from your DEV and your QA, and that the user has the correct role(s)
Check as well in your QA transaction RSSM for your ODSs objects; it might be that by transporting the ODS, some authorizations have been applied by default.
hope this helps...
Olivier.

Authorization issue "No authorization"

Dears gurus,
I created an analysis authorization using tx. RSECADMIN, this contains the IO 0COSTCENTER restricted with some value, and also contains the IO: 0TCAACTVT, 0TCAIPROV, 0TCAVALID. When I assigned it to a role using tx. PFCG. But when the query is executed it appears the following message: "No authorization". Using a trace tool, it appears to requiere the analysis authorization 0BI_ALL, but if I give this authorization, it doesn't restrict the IO 0COSTCENTER as wanted.
Please let me know what is missing.
Best regards,
Pilar Infantas.

Remove 0BI_ALL object fro users profile and try executing as below it should give you the authorization objects values missing ..
goto RSECADMIN >Analysis>Execution as User -->enter the user name you are executing the query
Check box -->with Log option
select RSRT option
hit start transaction button ,it should show you the authoriztion errors with authorization objects missed.
if not
again RSECADMIN>Analysis>Error Logs-->check with the latest time stamp for that particular user and analyse the authorization issues
Hope it Helps
Chetan
@CP

S_CTS_ADMI Authorization issue

Similar Messages

Maybe you are looking for