S everyone else still getting play back errors with LP8?

Hope this is resolved, i use a M-Powered copy of Pro Tools to track against a 2 mix of the Logic Session, and i barely get the tracks i did in LP6 to play with out a error, i can not run any midi, i got more tracks in previous version to play back then i do now in Leo with LP8.
to narrow it down, i only use one verb bus, delay and echo bus, compressor on every channel used including Bus, Ozone on the master channel, i run only 20 stereo tracks, 4 which are with the ESX24., in Logic 6 i was running all this with a few Logic plugs on the master channel and not a hick up, and i was using a older 1.2 Ghz macbook pro, now i have a Core 2 Duo 2.4Ghz 17 inch MBP and i can not play beyond 8 tracks with compressors and a verb channel.
Anyone find another work around, i was using the the one with the terminal command but i see no effect on it's performance anymore.
-*MBP 17, Logic Pro, PT M-Powered with Ozone., DUET.*

Logic Pro wrote:
Hope this is resolved, i use a M-Powered copy of Pro Tools to track against a 2 mix of the Logic Session, and i barely get the tracks i did in LP6 to play with out a error, i can not run any midi, i got more tracks in previous version to play back then i do now in Leo with LP8.
Sorry I'm a little bit confused
this is your main question...
Are you using M-powerd copy of Protools?
if you don't use any Protools version maybe the issue is related with Apogee.
in any case I had a similar problem on iMac...
and... maybe i'm lucky, but the fresh reinstall without use DIGI or M-Powered (AVID) drivers and any Protools version ... PTLE is very similar as PTLE M-Powerd...
I'm refering to that when I talk about PTLE.
But if you continue to have the issue after a fresh instal without installin PT M-Powered oe any PT version... maybe you can try to use the internal built in audio card of your Mac book Pro...
I hope that you will find the best way to solve your issue.
Protools HD is not the same at all...
Logic works fine on HD system.
Good Luck
G

Similar Messages

HT4623 Play back error on utube

One me iPad ,when going on you tube short clips are ok but films anythink long keep getting play back error on utube

Hello Rickonetobe,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Best of luck,
Mario

Trying to sync my iPod with iTunes and I am getting this message:"This computer is no longer authorized to play purchased items that are on the ipod"... I have deauthorized and reauthorized the account and still getting the same error.

Trying to sync my iPod with iTunes and I am getting this message:"This computer is no longer authorized to play purchased items that are on the ipod"... I have deauthorized and reauthorized the account and still getting the same error. I have read and followed the instructions in the support article TS1389. I do NOT have an SC info folder at /Users/Shared/ directory to delete.
I just installed Lion yesterday, and am running iTunes 10.4. First attempt to sync since upgrade.
Thanks
Dan

Yup,
Me too...this is stupid, stupid, stupid. Just purchased my 200 (ish) mac and now I am told that my new Mac Book pro is not "authorized".
Which if my 200 macs are authorized. Can someone please tell me???
I "deauthorized" my old MBP and still told I cannot use my iPhone with iTunes.
Interesting that my old $2500 MBP, my new $3000 MBP and my $500 iPhone all cannot work cuz of some pinhead's decision to use this assorization process.
Yes I am very, very, very mad.

Still getting this Internal error: 400 bad request. (115000).

I am still getting this Internal error: 400 bad request. (115000). I read that it was supposed to be fixed in Muse 3. I am using forms with long labels. Please help.
Thanks.
Bill Murphy

Thanks but his is how I solved my issue. I added a link in the Label in its own text box to look like a button. This is because I could not add a link in a label omits own. This is a nice solution because the linked info is opened in its own page so when the use closes that page there form is not lost and they can continue to the next form field. A work around that made my project look better.
If you can tell me how to add a close button or link on the info pages that would help so the user can see it right off and not have to use the browser to close the newly opened window.
Thanks for getting back to me. I would send you the muse file to test but I copied over it making this new version.
Bill Murphy
(647) 966-9325
[email protected]
www.purplealien.net
Communication is everything; without it we have nothing.

Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, it says I need to update itunes to 10.6.3 or later. I did, but still get the same error message.

Ever since updating to new OS, my iphone won't sync to itunes. When I plug in the phone to the PC, dialog box says I need to update itunes to 10.6.3 or later. I did that update, but still get the same error message.
Can anyone offer suggestions?
Thanks!

Since it told me to update, I updated to 10.7.
Then when I plugged in the phone again, it gave the same message that I need to update itunes.

I'm getting an error starting Photoshop CS4. Error number 148.3 Licensing for this product has stopped working. I rebooted several times to no avail. Still get the same error message everytime I try to start Photoshop. I'm using Windows 7 -- 64 bit

Error number 148.3 Licensing for this product has stopped working. I rebooted several times to no avail. Still get the same error message everytime I try to start Photoshop. I'm using Windows 7 -- 64 bit

If you can not use CS4 menu Help>Activate|Deactivate to get the install working again you may need to re-install CS4.

HT4864 I am using Entourage and followed all the instructions above and still getting IMAP Server error. Error msg:Security failure. Data decryption error.

I am using Entourage and followed all the instructions above and still getting IMAP Server error. Error msg:Security failure. Data decryption error.

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp b

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?

Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand

TS1424 Trying to DL a free app & I'm getting a message saying my billing info is needed because my security code is wrong. Once I put it in,I'm still getting the same error message

Trying to DL a free app & I'm getting a message saying my billing info is needed because my security code is wrong. Once I put it in,I'm still getting the same error message

Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/

I reinstalled iTunes because of msvcr80.dll and I'm still getting the same error

Help. I uninstalled my iTunes because of msvcr80.dll. I reinstalled iTunes again and now I'm still getting the same error.
Can anyone help me with this?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Still getting itunes match error code 4001

Still getting itunes match error code 4001. Have tried the a/lt/option delete to trick, have reinstalled, etc. Nothing works. Anyone know of a fix?

iTunes Match get error -3231 - https://discussions.apple.com/message/22682187 - read all posts, not just the "solved" one.

HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

Welcome to the forums.
Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings. You could start a new iDVD project, or try deleting encoded assets.
Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have). Double layer DVDs can be finicky and are used for video more than 2 hrs long.
Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
For a detailed treatise, see: https://discussions.apple.com/thread/3926901?tstart=0
John

A week after renting a movie, still getting message "An error occurred in downloading this content. Try again later." Have tried re-renting it, still the same. What next?

A week after renting a movie, still getting message "An error occurred in downloading this content. Try again later. Have tried re-renting. What next?

Wales793Jul 27, 2014 12:31 PM Re: "An Error occurred while downloading content."
Re: "An Error occurred while downloading content."in response to augiefritzmom
I have been trying to fix this for 4 weeks , several visits to the apple store ... all irrelevant suggestions , was even told to buy an Apple TV ten 3 as it was an issue with HD steaming only supported on the new unit ...
I do not go on these sites , but Apple are losing the plot these days ...
Here is what I found that fixed the issue for me ...
1) go to Gen\network\DNS
2) It will be set to Auto , for some reason the DNS is being set to you router , not your service provider ...
3) I am with Charter (do a quick search charter DNS on the Web) , will give you their DNS ,
Charter DNS Servers
http://www.charter.com
Primary DNS: 24.196.64.53
Secondary DNS:
View all United States of America DNS Servers
4) Go to manaul and set the DNS to the service prover
5) should be good to go ...
Why we have to go to the level to solve this stuff I have no idea ..... hope it helps ....
John

Every time I download the itunes installation file, it get deleted because it has got a virus... I've turned Norton 360 completely off, but still get the same error???

Every time I download the itunes installation file, it get deleted because it has got a virus... I've turned Norton 360 completely off, but still get the same error???

Hello wilsona1234,
Sorry for the trouble. What is the exact detection from Norton for the installation file? Did you download itunes from the legitimate Apple web site? What is the error you are referring to?
Thanks,
Harry
Norton Support

TS2446 I've reset my Apple ID password twice and still get a "disabled" error message....???

I've reset my Apple ID password twice and still get a "disabled" error message on my IPad, Iphone, and ITunes. I have also gone into the "settings" on both the ipad and iphone and reset the passwords to no avail.

This is not an iPhoto issue. Contact Apple support
LN

S everyone else still getting play back errors with LP8?

Similar Messages

Maybe you are looking for