S&H Cess patches and Notes

Dear All,
             Please provide me the S&H Cess patches and Notes.
thanks,
tiru

Hi
Following is the master note for changes for SHCess.
Note 1044509 - Master note for SECess in release CIN30A - Budget 2007.
Patches will be updated by BASIS people.
If helpful reward max points.
regards
Gibi Philip.

Similar Messages

  • Servers where patches will not install automatically or manually, Live updates are broken and when checking installed updates shows "NO UPDATES ARE INSTALLED ON THIS COMPUTER" SFC \SCANNOW will not run

    Hello, (Bit of a long one but please read)
    We have 3 servers in same physical location and server OU etc that are exhibiting the exact same behaviors (we have server servers in this location that are not), as above theyt are all W2008 R2 SP1 and all built from the same standard
    image we use on hundreds of other computers, they have also been in production for different amounts of time and we started to see this behavior at different times with them: (Its odd they are all in the same site where there are also several other servers
    that are not effected, there must be a link ? )
    These servers are all missing several patches when checking our internal tool that reports from IBM endpoint management that we use to deliver patches (they are not all missing the exact same patches some ore or less than other), although
    SCCM (we used SCCM to deliver patches until around 6 months ago) and IBM EM are both running (some ptches hark back to the SCCM Delievry days) they are not patching and when attempting to patch manually by downloading the exact patch coresponding to the fixlet
    ID and the KB , the stanbdalone installer starts and after some time you receive an error message “The update is not applicable to yoru computer”. Windows update returns error 80070006 for all of the servers.
    it is worth noting that other applications and products also using the .MSU extension will insatll so it is not a problem with the installer service.
    The above led me to think a corrupt patch may have stopped the sequence of patching so I then looked in “Programs and Features” => “Installed updates” and this is blank for all of them returening the message:
    “NO UPDATES ARE INSTALLED ON THIS COMPUTER”.  (this I believe is a part of the fundamental issues and resolving this may resolve the patching)
    Another issue is that if you run  “SFC /SCANNOW” It starts the scan and then returns: “Windows Resource Protection could not perform the requested operation” (Also in safe mode and both from an elevated CMD and WMI is started as a service)
    The all three are probably related so I think fixing the “SFC and NO UPDATES SHOWN” issues will resolve the first.
    The things I have tried so far are:
    Running : wmic qfe list full /format:htable > c:\updates.htm             Should produce a list of updates but instead returns :  No Instance(s) Available (this is not hopeful)
    Fix: Ran the “SYSTEM UPDATE REDINESS TOOL” from  http://support.microsoft.com/kb/947821
    Result : Update Ran successfully but NO CHANGE
    Fix: Ran the automated and manual fix “RESET WINDOWS UPDATE COMPONENTS” here :
    http://support.microsoft.com/kb/971058/en then undated windows update agent.
    Result : All ran successfully and NO CHANGE
    Fix: Ran MBSA
    Result : Runs successfully and then stays at “Done downloading security update information” (Log gives no obvious information)
    Fix: Renamed the software distribution folder/restarted services (Various variations of this fix online, tried a few)
    Result: Runs as described in article with new Software distribution folder being created,
    NO CHANGE
    Fix: Create/Correct the  reg key for windows trusted installer located here HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version (several articles relating to this and the above issues)
    Result: the existing key was correct as should be from internal system information gathered , required in article.
    Fix: Ran the “Windows update trouble-shooter”
    as here :
    http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
    Result:  It detected and fixed error’s but still no change.
    The WMI Repository checks out on them all for both of the methods I know to verify “Get-wmiobject –list |measure” and ensure count is over 900 and also “C:\>winmgmt /verifyrepository” and the repository came back as “WMI Repository is consistent”. I guess
    this is not hard evidence the WMI is OK, but these are the only methods I know.
    I have also tried removing the server from its OU , running a GP Update and then rebooting and testing but to no avail (Bit of a longshot but tried to link the distinction between the three servers and the OU GP is one of them)
    I have tried a few other articles registering .Dll’s etc , but I did not take a note of links as I was at the start of this and didn’t expect it to go so long so please reply with anything you see not above im happy to try again.
    I have thought about removing SP1 and reinstalling it but this will require a major downtime and only possible if the backup files of SP1 have not been removed.
    Any help is apreciated !

    Hi,
    Please try to rebuil the WMI repository.
    For detailed information, please refer to the blog below,
    http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
    If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
    Best Regards.
    Steven Lee
    TechNet Community Support

  • I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

    I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.

    Your only recourse is to force it into DFU mode:
    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

  • I have installed the patch for output. it still doesn't work i am running windows 8.1 i have tryed the 32bit patch and the 64bit patch it still will not show up in workspace.

    I am running Windows 8.1 i have installed the 32bit patch and the 64bit patch and neither one works. there is nothing in the workspace folder to delete. HELP!!! college student and campus running mac computers.

    I am having the exact same problem and have tried everyone thing it is driving me crazy if you hear of anything that works let me know i would be very grateful.

  • UK Public sector : Teachers Pension Patch and Functional Setup

    Hi
    I have a query regarding the functional setup for the above. (I am assuming / expecting answer from those who have done this setup already and they know/gone thorugh the patch readme file )
    I am trying to use the code provided in the patch readme file to findout correct tier for pension contribution..In order to do that I need the Annual FTE Salary inside fast formula.
    The patch readme says ,
    Once the Formula has retrieved the pension contribution Rate, it needs to be
    applied to the actual earnings in the period.
    l_tps_emp_contr_sal = FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD
    However I am getting zero value for FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD.
    i.e. l_tps_emp_contr_sal is zero which is being passed to
    l_EE_Contribution_Percent = to_number(GET_TABLE_VALUE
    ('PQP_TPA_PENSIONABLE_PAY_RANGE',
                                       'Employee Contribution Rate',
                                       to_char(l_tps_emp_contr_sal)))
    and nothing is coming up.....
    How do I get the correct value of FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD ?
    The readme says following
    FTE Salary/Amount
    The Annual salary is the Gross Full Time Equivalent salary based on which the
    band should be decided. There can be multiple elements per assignment that
    could be populating this value and each element may have different
    configurations for example:
    a. Element may have annual value from which a period value is calculated
    b. Period value to be paid
    The above this can be further classified based on
    a. usage of working pattern or working hours
    b. Full time salary
    c. Part time salary.
    a. One time payment on which Annualisation may not be applied but FTE should
    be applied.
    b. One time payment on which Annualisation may be applied but FTE should
    not be applied.
    c. Annual Value on which FTE should be applied.
    d. Annual Value on which FTE should not be applied
    There are many more variants to the scenarios described above.
    To achieve the calculation of the Gross Annual Full Time Equivalent salary
    for all possible scenarios the seeded element FTE Annualised Pay should be
    used by the customer.
    In order for the Pension contribution rate to be determined, the FTE annual
    salary effective at the period in question, must be available.
    It is presumed that the FTE value will be available for the current elements
    that customer uses for paying the teachers as it would be needed to determine
    the actual payment value for the period.
    This value will be fed to the new seeded element (FTE Annualised Pay) by the
    individual element formula.
    Suggested changes for determining Annual Full Time value:
    Suggested changes in elements formula for determining Annual Full Time value:
    The following statements should be added to the existing earnings element
    formula. These are suggested changes to the existing formulae to derive the
    Annual FTE salary.
    Case 1: If the Element Formula has access to Annual FTE Value.
    return_Annual_inf = ANNUAL_VALUE
    /*Assign Annual FTE Value for this element to variable return_Annual_inf*/
    Case 2: If the Element formula has access to only to Period value and
    Annual FTE Value is not stored anywhere.
    return_Annual_inf = (PERIOD_VALUE * PAY_STATUTORY_ANNUAL_PERIODS)
    /* Assign Period Full time Value for this element multiplied by standard
    DBI for annual periods to local variable return_Annual_inf */
    Case 3: If the Element formula has access to only to Annual Part time value
    and Annual FTE Value is not stored anywhere.
    return_Annual_inf = ANNUAL_VALUE / ASG_FTE_VALUE
    /* Assign Period Full time Value for this element multiplied by standard
    DBI for annual periods to local variable return_Annual_inf */
    Case 4: If the Element formula has access to only to Period Part time value
    and Annual FTE Value is not stored anywhere.
    return_Annual_inf=(PERIOD_VALUE*PAY_STATUTORY_ANNUAL_PERIODS)/ASG_FTE_VALUE
    /* Assign Period Full time Value for this element multiplied by standard
    DBI for annual periods then divided by standard DBI for FTE to local
    variable return_Annual_inf */
    Note:
    The new local variable return_annual_inf should be returned from formula to
    the new seeded information element FTE Annualized Pay.

    Hi
    I recently did an evaluation of this patch, and I did get it to work; however, in order to do so I needed to amend some other formulas for e.g. calculation of salary, so that the annualised FTE figure was returned from the formula. This was then referenced in the formula result rules for the annual salary element, to feed that new result to the seeded element provided in the patch ('FTE Annualised Pay'). That then fed the balance.
    It's a major headache as you will have to similarly amend all formulas/result rules pertaining to elements that could form part of the reckonable pay for this calculation.
    Where I am, we won't be using it as we had to come up with our own solution to stand any chance of being 'legal' in time for April.
    Hope this is of use
    Clive

  • CS6 update 13.0.5: "This patch is not applicable for you."

    I tried to install Photoshop_CS6_13_0_5_upd.dmg and got:
    Update Failed
    Updates could not be applied.
    This patch is not applicable for you.
    I bought Photoshop CS6 as a download directly from Adobe, installed Photoshop_CS6_13_0_1_upd.dmg without problems, and then activated Photoshop with offline activation on a computer not connected to the Internet.  When I try to update I get these log messages:
    ~/Library/Application Support/Adobe/AAMUpdater/1.0/aamu.log:
    2013-07-04T14:14:55: >>> Adobe Updater Log Begin >>>
    2013-07-04T14:14:55: UpdaterCoreImpl::InitLogFile : Application Version 6.0.0.67
    2013-07-04T14:14:55: UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = /Users/howard/Library/Application Support/Adobe/AAMUpdater/1.0/aamu.log
    2013-07-04T14:14:55: UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
    2013-07-04T14:14:56: UCInitialize : AAMLauncher was NOT running.
    2013-07-04T14:14:56: CFU(Webfeed): Query licensing type for LEID  = Photoshop-CS6-Mac-GM
    2013-07-04T14:14:56: CFU(Webfeed): Patch is meant only for perpetual licenses, but client doesn't have a valid perpetual license.
    2013-07-04T14:14:56: CheckForManualApplicableUpdates : The update is not applicable as per licensing checks
    2013-07-04T14:14:56: UpdaterCore : Returning from << UCInitialize >> Returning with outErr Value =>  = 36
    2013-07-04T14:16:14: Returning from << UCTerminate >> call with value = 1
    2013-07-04T14:16:14: UpdaterCoreImpl::ShutdownLogFile : Going to call ShutdownESDLogFile()
    2013-07-04T14:16:14: <<< Adobe Updater Log End <<<
    ~/Library/Logs/PDApp.log:
    Thu Jul  4 09:14:50 2013    [INFO] PDApp - Build Version - 6.0.335.0
    Thu Jul  4 09:14:50 2013    [INFO] PDApp - Logging Level verbosity Set  to 4
    Thu Jul  4 09:14:50 2013    [INFO] PDApp - Application initialization start, Looking for command line arguments
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.CommandLineParser - Parsing the command line provided. Number of command line arguments is 6
    Thu Jul  4 09:14:50 2013    [INFO] PDApp - Non Deployment workflow identified...
    Thu Jul  4 09:14:50 2013    [INFO] PDApp - No Non Deployment workflow PDApp running so new instance is allowed to run...
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.WindowManager - Initializing native WindowManager
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.MessageQuequeManager - Message Queue Manager initialized...
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.AsyncMsgProcessor - AsyncMsgProcessor initialized...
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.AsyncMsgProcessor - AsyncMsgProcessor Message Queue initialized...
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.ExternalGateway - ExternalGateway initialized...
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.AppletManager - AppletManager initialize...
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.ExternalGateway - NativeCommandHandler initialized...
    Thu Jul  4 09:14:50 2013    [INFO] PDApp.ExternalGateway - NativePlatformHandler initialized...
    Thu Jul  4 09:14:51 2013    [INFO] PDApp - Registering Notification to listen messages from another instance
    Thu Jul  4 09:14:51 2013    [INFO] PDApp - Detecting Applet Database file...
    Thu Jul  4 09:14:51 2013    [INFO] PDApp - Fetching Applet registeration information...
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.AppletManager - Applet database path - /Applications/Utilities/Adobe Application Manager/
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.AppletManager - PIM library path - /Applications/Utilities/Adobe Application Manager/core/AdobePIM.dylib
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.AppletManager - Loading PIM library...
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.AppletManager - Fetching PIM API's...
    Thu Jul  4 09:14:51 2013    [INFO] PIM - Build Version - 6.0.335.0
    Thu Jul  4 09:14:51 2013    [INFO] PIM - Logging Level verbosity Set  to 4
    Thu Jul  4 09:14:51 2013    [INFO] PIM - CREATE PIM Instance ...
    Thu Jul  4 09:14:51 2013    [INFO] PIM - trying to createOrUpdatePIMDbSchema.
    Thu Jul  4 09:14:51 2013    [INFO] PIM - Current db schema version on machine 1.
    Thu Jul  4 09:14:51 2013    [INFO] PIM - Current db schema version to install 1.
    Thu Jul  4 09:14:51 2013    [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
    Thu Jul  4 09:14:51 2013    [INFO] PIM - PIM Database is Up To Date.
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.AppletManager - Getting applet data from Applet database
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.AppletManager - All installed pakages version string (pim_getCurrentPackagesVersion) is D6:6.0.335.0|DECore:6.0.335.0|DWA:3.0.94.0|LWA:3.0.64.0|P6:6.0.335.0|PDApp:6.0.335.0|UWA: 6.0.335.0
    Thu Jul  4 09:14:51 2013    [INFO] PIM - PIMSqlite closeDB status 0
    Thu Jul  4 09:14:51 2013    [INFO] PIM - FREE PIM Instance ...
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.AppletManager - Registering Applets...
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.WindowManager - Creating APEWindow...
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.WindowManager - Creating window instance
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.WindowManager - Checking for appletID and appletVersion given in CommandLineOptions
    Thu Jul  4 09:14:51 2013    [INFO] PDApp.WindowManager - Creating APE stage instance
    Thu Jul  4 09:14:53 2013    [INFO] PDApp.WindowManager - Loading main SWF with Path and args - /Applications/Utilities/Adobe Application Manager
    Thu Jul  4 09:14:54 2013    [INFO] PDApp.WindowManager - Assigning window ID - 1 to created window
    Thu Jul  4 09:14:54 2013    [INFO] PDApp.ExternalGateway - MessageHandler initialized...
    7/4/2013 09:14:54.811 [INFO] PDApp.StartupCommand Logging Level verbosity Set to  INFO
    7/4/2013 09:14:54.812 [INFO] PDApp.StartupCommand Processing the startup Command
    7/4/2013 09:14:54.816 [INFO] PDAPP.AppletManager Starting Applet registeration...
    7/4/2013 09:14:54.823 [INFO] PDAPP.MainDisplayMediator Looking up for the Exact versioned applet for ID :UWA_UI
    7/4/2013 09:14:54.827 [INFO] PDAPP.AppletManager Loading Applet: UWA_UI Version = 1.0
    7/4/2013 09:14:54.856 [INFO] PDApp.ZStringLoader PDAPP SWF - locale set to - en_US
    7/4/2013 09:14:54.858 [INFO] PDAPP.AppletManager Loading progress0 out of 1122223
    7/4/2013 09:14:54.895 [INFO] PDAPP.AppletManager Loading progress65536 out of 1122223
    7/4/2013 09:14:54.898 [INFO] PDAPP.AppletManager Loading progress131072 out of 1122223
    7/4/2013 09:14:54.901 [INFO] PDAPP.AppletManager Loading progress196608 out of 1122223
    7/4/2013 09:14:54.904 [INFO] PDAPP.AppletManager Loading progress262144 out of 1122223
    7/4/2013 09:14:54.906 [INFO] PDAPP.AppletManager Loading progress327680 out of 1122223
    7/4/2013 09:14:54.936 [INFO] PDAPP.AppletManager Loading progress393216 out of 1122223
    7/4/2013 09:14:54.938 [INFO] PDAPP.AppletManager Loading progress458752 out of 1122223
    7/4/2013 09:14:54.939 [INFO] PDAPP.AppletManager Loading progress524288 out of 1122223
    7/4/2013 09:14:54.941 [INFO] PDAPP.AppletManager Loading progress589824 out of 1122223
    7/4/2013 09:14:54.943 [INFO] PDAPP.AppletManager Loading progress655360 out of 1122223
    7/4/2013 09:14:54.945 [INFO] PDAPP.AppletManager Loading progress720896 out of 1122223
    7/4/2013 09:14:54.946 [INFO] PDAPP.AppletManager Loading progress786432 out of 1122223
    7/4/2013 09:14:54.948 [INFO] PDAPP.AppletManager Loading progress851968 out of 1122223
    7/4/2013 09:14:54.950 [INFO] PDAPP.AppletManager Loading progress917504 out of 1122223
    7/4/2013 09:14:54.969 [INFO] PDAPP.AppletManager Loading progress983040 out of 1122223
    7/4/2013 09:14:54.971 [INFO] PDAPP.AppletManager Loading progress1048576 out of 1122223
    7/4/2013 09:14:54.972 [INFO] PDAPP.AppletManager Loading progress1114112 out of 1122223
    7/4/2013 09:14:54.973 [INFO] PDAPP.AppletManager Loading progress1122223 out of 1122223
    7/4/2013 09:14:55.332 [INFO] Updater.AppStartup -----PROCESSING APPLICATION STARTUP COMMAND
    7/4/2013 09:14:55.333 [INFO] PDApp.ExternalGateway Recieved Applet Loading Completion
    7/4/2013 09:14:55.335 [INFO] Updater.AppStartup commManagerResultCallback
    7/4/2013 09:14:55.338 [INFO] ZStringLoader Trying to load ZString for preferred locale - en_US
    7/4/2013 09:14:55.366 [INFO] ZStringLoader Locale set to - en_US
    7/4/2013 09:14:55.388 [INFO] Updater.LoadWorkflowCommand Processing the Load workflow command
    Thu Jul  4 09:14:55 2013    [INFO] PDApp.AppletManager - Loading Applet - UWA_Native for WindowID - 1
    Thu Jul  4 09:14:55 2013    [INFO] UWANative - Build Version - 6.0.335.0
    Thu Jul  4 09:14:55 2013    [INFO] UWANative - Logging Level verbosity Set  to 4
    Thu Jul  4 09:14:55 2013    [WARN] UWANative - Updater UI Locale not found in input xml.
    Thu Jul  4 09:14:55 2013    [INFO] UWANative - Updater in patch mode
    Thu Jul  4 09:14:56 2013    [INFO] OPM - Build Version - 6.0.281.0
    Thu Jul  4 09:14:56 2013    [INFO] OPM - Logging Level verbosity Set  to 4
    Thu Jul  4 09:14:56 2013    [INFO] OPM - Schema version and schema compatibility version are same or greater than current
    Thu Jul  4 09:14:56 2013    [INFO] OPM - No Record found for the input fields
    Thu Jul  4 09:14:56 2013    [INFO] OPM - Released OPM refrence successfully
    Thu Jul  4 09:14:56 2013    [ERROR] UWANative - Error occured in initializing updater.Error code: 36
    Thu Jul  4 09:14:56 2013    [FATAL] UWANative - Failed to initialize Updater Core
    Thu Jul  4 09:14:56 2013    [ERROR] UWANative - No Applicable Updates
    7/4/2013 09:14:56.856 [ERROR] UpdaterNativeApplet StartApplet indicated that Patch is not applicable: <error>NoApplicableUpdates</error>
    7/4/2013 09:14:56.918 [FATAL] Updater.LoadWorkflowCommand Running in patch mode. Patch not applicable.
    7/4/2013 09:14:56.957 [INFO] Updater.PopulateFinishScreenCommand -----STARTED POPULATING FINISH SCREEN------
    7/4/2013 09:14:56.959 [ERROR] Updater.PopulateFinishScreenCommand Showing No applicable patches screen
    7/4/2013 09:14:56.962 [INFO] AAMShared.DynamicViewMediator Showing screen with screenID : com.adobe.aam.shared.view.compositeComponent::ScreenErrorPageError
    7/4/2013 09:14:57.032 [INFO] Updater.PopulateFinishScreenCommand ---COMPLETED SHOWING FINISH SCREEN---
    7/4/2013 09:16:14.125 [INFO] Updater.PopulateFinishScreenCommand ------QUIT COMMAND RECEIVED------
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.AppletManager - Un-loading Applet - UWA_Native for window ID - 1
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.ExternalGateway - Callng the finalize function of the applet ID - UWA_Native
    7/4/2013 09:16:14.138 [INFO] PDApp.HostMessageHandler Recieved force window close message
    7/4/2013 09:16:14.139 [INFO] PDApp.HostMessageHandler Sending message to native
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.WindowManager - Destroying window with ID - 1
    Thu Jul  4 09:16:14 2013    [WARN] PDApp.WindowManager - GetAPEWindowIDString failed, Unable to find PlayerRef!
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Last window destroyed quiting as event. Quiting application as an event (async)...
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.WindowManager - Destroying PDApp main window with ID - 1
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.WindowManager - DestroyAllAPEWindow failed, APE Window count is zero while destroying all APEWindow's
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Terminating MessageQueueManager
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.AsyncMsgProcessor - Terminating AsyncMsgProcessor Message Queue
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.AsyncMsgProcessor - Terminating AsyncMsgProcessor
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.MessageQuequeManager - Message Queue Manager destructed
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Terminating AppletManager
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.AppletManager - AppletManager destructed
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Terminating WindowManager
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Terminating NativeCommandHandler
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.ExternalGateway - NativeCommandHandler destructed
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Terminating NativePlatformHandler
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.ExternalGateway - NativePlatformHandler destructed
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Terminating ExternalGateway
    Thu Jul  4 09:16:14 2013    [INFO] PDApp.ExternalGateway - ExternalGateway destructed
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Terminating APE
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Releasing all locks acquired
    Thu Jul  4 09:16:14 2013    [INFO] PDApp - Quiting Application
    hardware: MacBook Pro 17 inch, 2.4GHz Quad-core Intel Core i7
    Help > System Info...
    Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
    Operating System: Mac OS 10.7.5
    System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2400 MHz
    Built-in memory: 8192 MB
    Free memory: 4576 MB
    Memory available to Photoshop: 6917 MB
    Memory used by Photoshop: 69 %
    Image tile size: 1024K
    Image cache levels: 6
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 ATI-7.32.12
    OpenCL Version: 1.1 (Aug 10 2012 19:59:48)
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Radeon HD 6770M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1200, right: 1920
    Video Renderer ID: 16915206
    Video Card Memory: 1009 MB
    Video Rect Texture Size: 16384
    Serial number: 91199981517320233480
    Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Macintosh HD, 370.1G, 69.1G free
      n, 327.2G, 80.4G free
    Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
       AdobeACE.framework   AdobeACE   2.19.18.20743   66.507768
       AdobeAGM.framework   AdobeAGM   4.26.20.20743   66.507768
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.20743   66.507768
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.507768
       AdobeCoolType.framework   AdobeCoolType   5.10.33.20743   66.507768
       AdobeCrashReporter.framework   AdobeCrashReporter   6.0.20120720  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.95   66.510504
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1654  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1652  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Required plug-ins:
       Accented Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Adaptive Wide Angle 13.0, Copyright © 2012 Adobe Systems Incorporated - from the file “Adaptive Wide Angle.plugin”
       ADM 3.10x16, Copyright © 1987-2008 Adobe Systems Inc.  All rights reserved. - from the file “AdobeADM.bundle”
       Angled Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Average 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1993-2012 Adobe Systems Incorporated - from the file “Average.plugin”
       Bas Relief 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       BMP 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Camera Raw 7.4 (137), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
       Chalk & Charcoal 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Charcoal 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Chrome 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Cineon 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©2002-2012 Adobe Systems Incorporated - from the file “Cineon.plugin”
       Clouds 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1993-2012 Adobe Systems Incorporated - from the file “Clouds.plugin”
       Collada DAE 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©2006-2012 Adobe Systems Incorporated - from the file “U3D.plugin”
       Color Halftone 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Colored Pencil 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       CompuServe GIF 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Conté Crayon 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Craquelure 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Crop and Straighten Photos 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©2003-2012 Adobe Systems Incorporated - from the file “CropPhotosAuto.plugin”
       Crop and Straighten Photos Filter 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Crosshatch 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Crystallize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Cutout 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Dark Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       De-Interlace 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Difference Clouds 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1993-2012 Adobe Systems Incorporated - from the file “Clouds.plugin”
       Diffuse Glow 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Displace 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Dry Brush 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Eazel Acquire 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1997-2012 Adobe Systems Incorporated - from the file “EazelAcquire.plugin”
       Embed Watermark NO VERSION - from the file “DigiSign.plugin”
       Enable Async I/O 13.0.1 20120808.r.519 2012/08/08:21:00:00  © 2004-2012 Adobe Systems Incorporated - from the file “Enable Async IO.plugin”
       Extrude 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       FastCore Routines 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1990-2012 Adobe Systems Incorporated - from the file “FastCore.plugin”
       Fibers 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Film Grain 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Filter Gallery 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Fresco 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Glass 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Glowing Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Grain 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Graphic Pen 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Halftone Pattern 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       HDRMergeUI 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “HDRMergeUI.plugin”
       IFF Format 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Ink Outlines 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       JPEG 2000 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©2001-2012 Adobe Systems Incorporated - from the file “JPEG2000.plugin”
       Lens Blur 13.0, Copyright © 2002-2012 Adobe Systems Incorporated - from the file “Lens Blur.plugin”
       Lens Correction 13.0, Copyright © 2002-2012 Adobe Systems Incorporated - from the file “Lens Correct.plugin”
       Lens Flare 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Liquify 13.0, Copyright © 2001-2012 Adobe Systems Incorporated - from the file “Liquify.plugin”
       Matlab Operation 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1993-2012 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
       Measurement Core 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1993-2012 Adobe Systems Incorporated - from the file “MeasurementCore.plugin”
       Mezzotint 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       MMXCore Routines 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1990-2012 Adobe Systems Incorporated - from the file “MMXCore.plugin”
       Mosaic Tiles 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Multiprocessor Support 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1990-2012 Adobe Systems Incorporated - from the file “MultiProcessor Support.plugin”
       Neon Glow 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Note Paper 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       NTSC Colors 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1993-2012 Adobe Systems Incorporated - from the file “NTSC Colors.plugin”
       Ocean Ripple 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Oil Paint 13.0, Copyright © 2011 Adobe Systems Incorporated - from the file “Oil Paint.plugin”
       OpenEXR 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Paint Daubs 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Palette Knife 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Patchwork 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Paths to Illustrator 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       PCX 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1989-2012 Adobe Systems Incorporated - from the file “PCX.plugin”
       Photocopy 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Photoshop 3D Engine 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©2006-2012 Adobe Systems Incorporated - from the file “Photoshop3DEngine.plugin”
       Picture Package Filter 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1993-2012 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
       Pinch 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Pixar 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1989-2012 Adobe Systems Incorporated - from the file “Pixar.plugin”
       Plaster 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Plastic Wrap 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       PNG 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Pointillize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Polar Coordinates 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Portable Bit Map 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1989-2012 Adobe Systems Incorporated - from the file “PBM.plugin”
       Poster Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Radial Blur 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Radiance 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©2003-2012 Adobe Systems Incorporated - from the file “Radiance.plugin”
       Read Watermark NO VERSION - from the file “DigiRead.plugin”
       Reticulation 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Ripple 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Rough Pastels 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Save for Web 13.0, Copyright © 1999-2012 Adobe Systems Incorporated - from the file “Save for Web.plugin”
       ScriptingSupport 13.0, Copyright © 2012 Adobe Systems Incorporated - from the file “ScriptingSupport.plugin”
       Shear 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Smart Blur 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Smudge Stick 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Solarize 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1993-2012 Adobe Systems Incorporated - from the file “Solarize.plugin”
       Spatter 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Spherize 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Sponge 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Sprayed Strokes 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Stained Glass 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Stamp 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Sumi-e 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Targa 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Texturizer 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Tiles 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Torn Edges 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Twirl 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Underpainting 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Vanishing Point 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “VanishingPoint.plugin”
       Water Paper 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Watercolor 13.0, Copyright © 1991-2012 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Wave 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Wind 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Wireless Bitmap 13.0.1 20120808.r.519 2012/08/08:21:00:00  ©1989-2012 Adobe Systems Incorporated - from the file “WBMP.plugin”
       ZigZag 13.0, Copyright © 2003-2012 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
    Optional and third party plug-ins:
       PG-Processor 2.0.1 ©2002-2010 PixelGenius LLC - from the file “PG-Processor.plugin”
       PhotoKit Capture Sharpener 2 2.0.7 ©2002-2010 PixelGenius LLC - from the file “PhotoKit Sharpener 2.plugin”
       PhotoKit Creative Sharpener 2 2.0.7 ©2002-2010 PixelGenius LLC - from the file “PhotoKit Sharpener 2.plugin”
       PhotoKit Output Sharpener 2 2.0.7 ©2002-2010 PixelGenius LLC - from the file “PhotoKit Sharpener 2.plugin”
       PhotoKit Preview Helper 2.1.6 ©2002-2010 PixelGenius LLC - from the file “PG Toolbox Previewer.plugin”
       PixelGenius Toolbox 2.2.2 ©2002-2010 PixelGenius LLC - from the file “PixelGenius Toolbox.plugin”
    Plug-ins that failed to load: NONE
    Flash: NONE
    Installed TWAIN devices: NONE

    This girl here found the fix:
    How to Manually Fix Updates on Adobe Photoshop CS6 (from 13.0.3 to 13.0.6) on Mac with Retina Display |
    Basically, all you have to do is update the Application Manager (if your installation was like mine, I was still on v.6... it's up to v.9 now.  Go here for the update: Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager and run it... when done, launch Photoshop and check for updates.
    This is amazingly idiotic, I must add -- how does App Manager NOT update itself through the update process???

  • HT4901 I have HughesNet with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to backup my information all the time????

    I have HughesNet satellite for an ISP with a capped amount of Internet capacity. How can I use iCloud but adjust the time it is on to conserve my Internet allowance and not have to back up my information all the time?

    Thanks Roger W1,
    Yes, I was using iTunes to sync over cable without problems since orinigal purchase in 2011 and using 10.6 w/o problem. There was an "update" in Nov 2012 that crashed the sync service. I went to the Apple Store and reviewed the problem with the Geniuses there. It was discovered at that time that the update included mandated use of iCloud but enough of the un-updated code remained that he was able to patch functions to allow Microsoft Office to still sync over iTunes.
    This March (+/-) there was another "update" to 10.6 that totally destroyed the patch that was in place so there was no sync service available between Microsoft and iTunes what-so-ever. Then recently, because of some unknown process, all my notes, contacts, and calendars were erased in both my Apple utilities and Microsoft utilities.
    After many hours of frustration I was able to recover most of the information to the Apple utilities only, but those were unstable. At my visit to the Apple store it was suggested that an upgrade to 10.8 might solve the stability problem. That it did but being connected to the iCloud all the time keeps using up all my Internet time and I have nothing left to check emails or do research.
    This, to me, is not my problem but one created by Apple. I have searched the Internet and support groups and there doesn't seem to be a solution.
    The "aircraft mode" turns off all other communication functions and is not acceptable. Neither is disconnecting/turning off Airport on my MBP.
    Thanks,
    Jay

  • I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a W

    I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a Windows 8 OS so I bought the 13 and downloaded it on the new laptop. Our desktop had died so I downloaded the 13 on the new  desk computer also. Not thinking I downloaded 13 on my old laptop as I hope to get it patched up enough to be a backup for my photography. When I tried to activate it I realized that I had downloaded it too often. I didn't know you could only use it on two computers. Learn something new every day.. Any way I removed it and now my PSE 12 does not seem to be working. Now it could be something that I did or something that is an issue with the laptop. this laptop has all the previous editions on board as I always tried to update, except for the year I got a really good deal on Black Friday. I also notice that the new laptop has a copy of PSE 12 in the program list. To my knowledge I have never deactivated any of my PSE's except the extra 13 downloaded. Bottom line, do I need to go in and deactivate previous PSE versions and removed them from my computer? I could certainly use the space and secondly, can I deactivate the PSE 12 and then go back and reacitivate it and install it again on the old laptop or the desktop, whichever I deside would be the most appropriate place for the newer program. For the PSE 12 since it is an updater for 11, does the 11   still need to be on the laptop? thanks for anyone who can understand what I am trying to say and can advise me as to my next move. Thank you very much.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

    SSRS 2008 R2 is extremely slow.  The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes.  I have read this is a bug in SSRS 2008 R2.  We installed the most recent patches and
    service packs.  Nothing we've done so far has fixed it and I see that I'm not the only person with this problem.  However I don't see any answers either.

    Hi Kim Sharp,
    According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
    I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
    of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
    http://support.microsoft.com/kb/2276203
    Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/ 
    If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
    Actually, the Report Server ExecutionLog2  view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
    After you determine whether the delay time is in data retrieval, report processing, or report rendering:
    use ReportServer
    SELECT TOP 10 ReportPath,parameters,
    TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
    TimeDataRetrieval, TimeProcessing, TimeRendering,
    ByteCount, [RowCount],Source, AdditionalInfo
    FROM ExecutionLog2
    ORDER BY Timestart DESC
    Use below methods to help troubleshoot issues according to the above query result :
    Troubleshooting Reports: Report Performance
    Besides this, you could also follow these articles for more information about this issue:
    Report Server Catalog Best Practices
    Performance, Snapshots, Caching (Reporting Services)
    Similar thread for your reference:
    SSRS slow
    Any problem, please feel free to ask
    Regards
    Vicky Liu

  • Inventory says that Patch is not available but regedit has the patch.

    Hello,
    Ours is an HFM 11.1.1.3 and 3 months back we applied HFM 50 patch on it.
    Last week when I was applying HFM 500 patch we noticed that when I fired "hpatch lsinventory" it did not had HFM 50 patch in it, but when I saw in the regedit I was able to see HFM 50 patch in it and also I could see HFM 50 patch in HFM client.
    Then I tried applying HFM 500 patch but I got error saying pre-requisite HFM 50 patch is not available , so I applied HFM 50 patch again and then applied HFM 500 patch over it.
    What I understood is that our inventory might have got created by somebody in our team, but my question is do we have to reapply all the patches every time when we re-create inventory and then try to apply higher version of HFM patch.
    Regards,
    Rajnish Singh

    If you recreate the inventory you will lose the history of installed patches.
    If you then need later to install a patch which has a prerequisite patch, you will need to reapply the prerequisites (as you did) before you can proceed with your new patch.
    In short, you should not be recreating the inventory except in an emergency (corrupted) situation.
    going forward, oracle will be trying to release less smaller Patch Set Exception patches and more complete PSU patches (Patch Set Updates). if you keep up to date with the Patch Set Updates and minor releases, even if an inventory is recreated somewhere along the line, there should not be too many additional patches to be installed.

  • Patches and packges in 11.5.10.2 for solaris 9 to 10 upgrade

    Hi All,
    Im upgrading Solaris 9 to Solaris10, what are all the additional OS patches and Packages are required for APPS 11.5.10.2 on Sparc.
    Thanx in advance.

    Please review the following notes before starting the upgrade.
    Note: 169706.1 - Oracle® Database on AIX®,HP-UX®,Linux®,Mac OS® X,Solaris®,Tru64 Unix® Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169706.1
    Note: 258247.1 - Operating System and Oracle Application Upgrade Best Practices
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=258247.1
    Note: 209810.1 - How to Relink Oracle Applications 11i Programs After Upgrade or Patch of the UNIX Operating System
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=209810.1
    Note: 294932.1 - Recommendations to Install Oracle Applications 11i
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=294932.1

  • TS4209 Wi-Fi 1.0 patch will not install on a 10.7.4 Mac OSX even though the Wi-Fi loss bug is still there

    Hello all,
    The Wi-Fi 1.0 patch will not install on a 10.7.4 Mac OSX even though the Wi-Fi loss bug is still there, every now and then (the iMac does not detect any wi-fi network).
    Are there any other solutions regarding this issue ?
    kind regards

    I figured out the problem.
    This is going to sound a little crazy, but I've spent a lot of time on this one.
    There's some kind of incompatibility with Lion and Seagate ST31000340AS drives. I was trying to install Lion on these drives and it would consistently fail. I've also tried to use these drives in a RAID volume. No go. I tried three different drives of this model. All of them failed.
    I tried to install Lion on a Seagate ST31000528AS and it worked first time and sings beautifully.

  • Code is working fine with OIM9102 BP14 patch but not in OIM9102 BP20.

    Using OIM API calls, I am able to fetch usr_key and ugp_key succesfully when utilityFactory is initialized with system admin login.
    When utilityFactory is intialized with non system admin ID, usr_key and ugp_key is returning as "0".
    This code is working fine with OIM9102 BP14 patch but not in OIM9102 BP20. Do user need any access right to invoke API calls ? Any thing related to this is changed in this patch?
    Environment details:
    OIM 9102BP20
    Websphere 6.1

    No, no more rights are needed. If it is working fine into BP older than this one, raise a SR and ask support guys to file a bug. But you have to show them step-by-step working into the older one and not working on newer. It is quite difficult happen, but maybe this feature broken on new business patch 20.
    I hope this helps,
    THiago Leoncio.

  • Patches and SunSolve

    I have already mentioned in a couple of previous postings that, I am trying to install
    studio 11 on a system on which Forte Developer 7 is already installed.
    My question is, if I install studio 11 , is it still necessary for me to run
    "version libC*" command under /usr/lib directory in order to check whether latest
    patches are installed or not ?
    I am under the impression that : I need not , as I am installing Sun studio 11 which is
    the latest studio available. Can any body please confirm this ?
    In case I am supposed to check whether latest patches are installed or not, the document says
    I need to register myself with SunSolve. When I tried to register myself with SunSolve it asked me to
    enter Service Plan. But I am not sure which Service plan I should enter . Can any body help me ?
    Thanks,
    Ramesh.

    When you install Sun Studio 11, you have the option of also installing the required Solaris patches. You should accept that option, because Studio 11 will not run properly if the requried patches are not present. The patch installer will update a file only if it is a newer version than the one already on the system.
    Some of the patches are for system libraries like the C++ runtime libraries. There is only one copy of each of these libraries on the system, installed in /usr/lib, and shared by all compilers and programs that need them. Old compilers can use new versions of these libraries, so it is always safe to install the newest patch.
    Sun's upport model for free Solaris and free compilers is that most patches require a support contract. The current exceptions are security patches, patches for Sun Studio, and Solaris patches required by Sun Studio.
    If you go to the Sun Studio patch page
    http://developers.sun.com/prodtech/cc/downloads/patches/index.jsp
    you should be able to follow the links to the Sun Studio and required Solaris patches, and download them directly.

  • How can I do to install Patch and RDBMS using SILENT mode in a Pentium 4 ?

    I was installing the Oracle 8.1.6.0.0 in remote machines using a SILENT mode normally. But now, I`m having a problem with the Pentium 4. I need to apply a patch because of the bug number 1507768. And, after apply the patch, I don't get to install using the same response file (in a SILENT mode). How can I do to install the patch and the RDBMS using a SILENT mode in a Pentium 4?

    I've created a new domain with this command:
    $ asadmin create-domain adminport 18000 user admin dmRemineTest
    I've installed the serviceWindows with this script:
    SETLOCAL
    SET I=C:\Sun\SDK
    c:\windows\system32\sc.exe create JCAPS6U1_dmRemineTest binPath= "%I%\lib\appservService.exe \"%I%\bin\asadmin.bat start-domain dmRemineTest\" \"%I%\bin\asadmin.bat stop-domain dmRemineTest\"" start= auto DisplayName= "JCAPS6U1_dmRemineTest"
    pause
    ENDLOCAL
    like the one suggest me in this forum, and thanks for it but now i have an other problem. I've started the domain dmRemineTest and it is running:
    asadmin> list-domains
    dmRemineTest running
    domain1 not running
    Command list-domains executed successfully.
    I'm proving to access to eManager at link: http://intaliodevsrv:15000/eManager/Welcome.do
    inserting this informations required:
    Server Type: Sun Java System Application Server Domain (9.1)
    Host Name: localhost
    HTTP Administration Port: 18000
    User Name: admin
    Password: adminadmin
    I insert into HTTP Administration Port 18000 from here:
    <http-listener acceptor-threads="1" address="0.0.0.0" blocking-enabled="false" default-virtual-server="__asadmin" enabled="true" family="inet" id="admin-listener" port="18000" security-enabled="false" server-name="" xpowered-by="true"/>
    When I click on Connect to Server, eManager response with this message:
    Connection Failed. Please check the following:
    - Server Type is correct.
    - Server is running.
    - Hostname and Port number(s) are correct.
    - Server SSL configuration.
    How can I solve the problem?

Maybe you are looking for

  • Function "Follow-up in purchasing" in SAP

    Dear all, I am wondering whether you have heard of a Function "Follow-up in purchasing" in SAP? I am not quite understand of this processs, can anyone explain to me? and how does it setup in SPRO for this function to take place? thanks. tuffy

  • Signed out by forum every half hour!

    If I've posted a topic and and following replies throught hte day - I am only kept signed in for a half hour at most! It is so frustrating to have to sign in 10x a day to use the forum. Can I adjust this setting anywhere? and no matter how many times

  • Host name network change notification

    I recently installed Lion Server, and it is daily (sometimes more often) producing messages about "Host name of $mymachine.local has changed to $mymachine.local" (that is, no change) ... Any obvious reason why this should happen, and what one should

  • Scheduling Process Chains through Jobs

    Hi All, I have a question regarding scheduling of process chains using Jobs created in SM36. In our project we are not using Meta Chains to run the individual Process Chains. Instead jobs have been created for each chain and the jobs are scheduled on

  • Very slow Firewire data transfer when connected to ext. HDD

    Hi, I have both a Mini and a Mac book. When I connect my Macbook upto a WD MyBook Premium ext HDD and use SuperDuper! to back it up, I get an average copy speed of about 20 m/s. On my Mini I get about 2m/s! Both the machines are more or less the late