S.M.A.R.T. someiimes says my HD is bad other time it doesnst and sometimes...

... even find it ! When I use Everest to analyse the SMART when it says my HD is bad , it tells me that the HD failed at the Spin Up Time test . Should I change my HD?My mobo is a K8tNeo2 FIsr

Hi
If it is a SATA then a cable not fully on connector, or as TS says, a boot sequence in Cmos of floppy, CD, IDE0 may fix it. Make sure connectors are fully home, try another 4 pin power connector, and another IDE cable.
Cheers
jocko

Similar Messages

IPhoto won't open. Says CAUTIONThe iPhoto library is a Time Machine backup, and so cannot be used as the main library. Reopen iPhoto with the Option key held down to choose another library.

I tries to verify that my photos were being backed up on Time Machine to an external harddrive, because I would like to delete my Camera Roll on my iPhone. I was not able to view any photos in my backed up photo library, after entering Time machine. Now, I can't even open iPhoto on my iMac with the pop up box warning me that the library is a Time machine backup....which it shouldn't be, because I'm openning iPhoto on my Mac...NOT the external HD.
What happened, and how do I access my photos?

It sounds like you went into the Time Machine hard drive, found a library and "dragged" it to your Pictures folder or wherever on your hard drive. That's not the way to do it.
Go to your Pictures folder and enter Time Machine via the TM menu in the menu bar:
Then follow the instructions in this screenshot:
OT

Error message when trying to install mavericks. It won't let me select a disk to install Mavericks on. Message says "This disk is used to Time Machine backups." It is NOT used for back ups. help

When trying to chose a disk on which to install mavericks I get a message that says "this disk is used for Time Machine backups" and cannot be used. Help!

I don't know what will help at this point. You should never update a system that has problems, unless you're absolutely sure that the problems are caused by a bug that is fixed in the update. With your backups in an uncertain state, you should not update or do anything else except start a new backup.

Lion Install does not work, says "This disk is used for Time Machine backups"

I'm having trouble installing Lion onto my macbook pro intel core 2 duo.
I am backing up my computer with an external drive using TimeMachine, but i've disconnected it. Also i'm running SL 10.6.8
I have a windows 7 partition that was created with boot camp.
I've tried to make sure everything is all ready for lion but when I go to install lion it says "This disk is used for Time Machine backups" and the hard drive is grayed out.
Same problem as this guy: https://discussions.apple.com/thread/3190321?start=0&tstart=0
I'm hearing that a file called "Backups.backupdb" is on the top level of the hard drive, but I see no such file. I've looked at the invisible files and I cant find it.
I've also created a bootable flash copy of the lion install but that does not work It gives me the same message "This disk is used for time Machine backups".

"Backups.backupdb" if the file in Time Machine. As the discussion says, you have to find that file and trash it. Try spotlight to locate it. If that does not work, down load OmniDiskSweeper from the Internet (free) and go through an organized search to find "Backups.backupdb". If that takes too long or is too tedious, then if you have everything backed up, erase the HDD and start from square one.
Ciao.

When i login on game center it say enter your birth date when i enter it and i perss next the birth day will come again and again what should do

when i login on game center it say enter your birth date when i enter it and i perss next the birth day will come again and again what should do

Start a game with Game Center and go from there.

I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?

I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?

This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Trying to combine folders within LR4 from two separate drives without creating duplicates--sometimes it won't let me transfer to destination folder because it says files are there when they are not; other times, allows duplicates to transfer

Trying to consolidate 261K+ of images within LR4 between two drives. Someone who was "helping" me with my Library in LR4 for some reason took some but not all of the file folders from my main backup drive (M) and duplicated them onto a partitioned hard drive (E) directly on the computer. The duplication is huge, so I am trying to condense them all back onto the original backup drive M, particularly since I believe there are also folders on the partitioned backup drive E that do not appear on the main one M, and there are many more file folders on M that are not on E, so that is the destination drive.
CONSOLIDATION: When I try to drag either the file folders or the individual files from the duplicate drive E to the original drive M to combine the two drives since the folders in many cases for some reason are not identical, sometimes LR4 says the files already exist when they clearly don't. Other times it allows me to drag and drop all files, even if the exact duplicates are already on the destination drive, thereby doubling the number of files per image and creating more duplicates. Right now I am opening each file folder on the duplicate drive E, looking at what extensions and file names are there, scrolling to the original drive, making sure they appear to be identical, then going back to the duplicate drive E, deleting the images in the folder, removing the folder, and moving to the next folder on the duplicate drive E. *There has got to be a simpler way.*
CONSOLIDATION APPROACH: I did start to create file folders names A, B, C and group file folders under them to reduce clutter, since those header folders can be closed down when not in use, but now I am wondering if I should have done that alphabetization to the main backup drive rather than to the partitioned backup drive.
My goal is to consolidate the two drives down to one, delete as many images along the way that I know I will never miss, then backup the catalog and export it to an external drive and then copy that to yet another drive for offside storage. Does this sound like the proper plan? Last time it took almost 24 hours and over a terabyte to export the catalog.
DUPLICATION: I also have many file folders that have the exact same image in them. One portfolio image may actually be in eight different folders, with the exact file, file name, file size, and date, even though I always have checked "no duplicates on import," How can this be? What is the best way to sort through duplicates? Why are the files in some of the duplicate folders not in numerical order? If I do a search and call up a file # and find 15 duplicates, the only way I can find where those duplicates reside is to take each duplicate, right click to Locate Folder in Library, then once I find it, I have to go back to All Photographs>Text.search for file #, go to the second duplicate, right click to Locate Folder in Library, then once I find it, I have to do it all again. Is there a simpler way to see all the occurrences in their respective folder locations at once?
SEARCH BY FILE FOLDER NAME ONLY: I also find I can't search for a file using a folder name (for example, "John_Doe"). I can only search by file #, keywords, or camera/lens/date, etc. Why will it not work to use All Photographs>Text>search for Doe? In other words, if I didn't keyword the individual files as John Doe, I can't search for them by that moniker.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
FOLDER LIST PRINTOUT: Is there a way to print out the Folder list (other than a screen shot)? I have so many file folders on each drive since I sort not by Year/Month/Date but by subject. It makes trying to compare duplicate folders quite unwieldy.
SLOW RESPONSE: And finally, as though that weren't enough, why does LR4 continually blink to a white screen after each keystroke? Takes forever just to be able to click through images, view info after hovering, etc. All other programs are closed down and the operating system shows very little memory being used.

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

My iTunes says that there is a problem with my ipod and i have to restore it, but i bought songs on my itunes on my ipod not on the itunes on the computer so i have not transfered purchases and now it wont let me how doi restore without losingmy newsongs

So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything. Thanks

There is a backup plan after doing the Restore. Read this.

I am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

I
got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
Thank you for your help, Frank!
To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
regards

I am trying to take a picture of a web page and paste on a one drive powerpoint. I tryed pressing the print screen button, and pasting. But it is giving me message saying that my browser can not fine the clipboard, and I need to use the keyboard shortcuts

I need to take a picture of a web page, insert it onto a powerpoint online, and crop the picture. I am pressing the print screen button, and right cliking paste. But I am getting the warning message saying that my browser can not use the clipboard, and I am unsure of how to take a picture, then paste it, and crop it all on to a power point.

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********

Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5

Trying to rebuild my iphoto library from time machine backup and it still says 0 restored with a grey screen and the circle. How can i restore my library?

I just bought a new Macbook pro and i tried to rebuild my iphoto library from a time machine backup on an external hard drive. Even after pressing command+option when starting iphoto and selecting rebuild library from automatic backup, it still doesn't work with the grey screen with the white circle and a little window that says 'rebuilding library: 0 versions restored'. I also tried to make a copy of my iphoto library but that did not work either. how can i restore my iphoto library or at least gain access to my photos?

Your question is not clear
Rerairing or rebuilding the iPhoto library never involves using Time Machine in any way
TM is a totally seperate program and you can "restore" a file (including the iPhoto library) from the past using TM - you launch TM and go back to the time you want and select the file (or folder or package) you want and click restore - it probably is best to keep the current one until you are sure everything is good
LN

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

Perhaps this discussion will help with your issue,
https://discussions.apple.com/message/16502324#16502324

After I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

after I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?

Try removing and then reinstalling the Apple software using these instructions.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
The above containes a link for XP. Also. make sure you install the correct Apple software, It comes in 32 and 64 bit and you need the one that is the same as the computer OS

S.M.A.R.T. someiimes says my HD is bad other time it doesnst and sometimes...

Similar Messages

Maybe you are looking for