S/N ratio for 27" i7 imac?

Folks,
Is the signal to noise ratio for the audio input and outputs of the 27" specified anywhere? I've had a look, but can't seem to find it.
Thanks

Hi komradebob: Check out the Apple article below, it is for a 2007 iMac, but specs should be close to this.
http://support.apple.com/kb/TA24899
Stedman

Similar Messages

  • Where can I get a new hard drive for my intel imac?  **** thing dumped, less than 3 years old.

    This is my first mac and the **** hard drive crashed in only 2+ years and of course the waranty is expired.  Can I replace the hard drive with any 3.5" replacement or do I need something special.  And if I do where can I get it?  I didn't see anything specifically for an intel imac at apple store.  I don't want to pay apple to install it, already spent enough money on this disappointing purchase.

    any 3.5" Sata drive will do.  I recommend http://www.macsales.com/, or http://www.newegg.com/

  • HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

    I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

    A PC can have more issues connecting than a Mac.
    But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
    If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
    Important thing is to get access to the TC.
    The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
    http://support.apple.com/kb/DL1482

  • How can i use my old iMac as a extended desktop display for my new iMac?

    I recently purchased a 21.5 in iMac and wanted to use my old iMac as a extended desktop. My new iMac has thunderbolt and USB 3.0 connections while my old iMac has firewire (400 and 800), USB 2.0 and mini-DVI. Is this posible?

    Welcome to Apple Support Communities
    If your iMac has got Mini-DVI, you have a 17, 20 or 24-inch iMac that doesn't support Target Display. Late 2009 and Mid 2010 27-inch iMacs, and iMacs with Thunderbolt can be used as external displays. Read > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    If your old iMac doesn't support Target Display mode, you can use ScreenRecycler to use your old iMac as an extended display for the new iMac. The only thing you need is that both Macs are connected to the same network

  • Can i use iCloud for pages documents iMac?

    can i use iCloud for pages documents iMac?

    Hi lmdavis72,
    It looks like you can.
    From "iCloud: Documents in the Cloud overview"
    You can download a document from icloud.com/iwork to your Mac or Windows computer, edit it, and then drag the revised version to icloud.com/iwork. It’s then automatically updated on all of your iOS devices. You can also drag an iWork ’09 (Keynote, Pages, and Numbers) or Microsoft Office (PowerPoint, Word, and Excel) document created on your computer to icloud.com/iwork.
    So it looks like it can go between iOS devices and your iMac.
    ivan

  • I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

    i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

    Hi champrider,
    You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
    OS X Mavericks: Allow access using Apple Remote Desktop
    This help page will provide you with some other useful resources for Apple Remote Desktop -
    Remote Desktop Help
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I am using iphoto 6.06 for my intel imac.  I have been trying to print pictures from iphoto and i keep getting a message that states " the picture you are trying to print is in the iphoto library"  what can i do to be able to print a photo from iphoto

    I am using iphoto 6.06 for my intel imac.  I have been trying to print pictures from iphoto and i keep getting a message that states " unreadable file: the following file could not be imported.  the file is in the iphoto library folder"  also when i try to print a picture from iphoto i get a message that says "no page was selected"
    not sure what happened but i can pnly print when i drop the photo onto my desktop as an 8.5 x 11 size picture and i am trying to print 4x6's

    Since the new library gives you the same message log into another user account on your Mac and see if you can run iPhoto without getting that message.  If you get that message there also a reinstall of iPhoto seems indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
    Click to view full size
    Then install iPhoto from the disk it came on originally and apply all available updates to it.

  • A UPS for my new iMac 21.5"

    I've ordered a new iMac 21.5" with Fusion Drive HD.
    Can someone advise me what is the proper UPS to buy for my new iMac please ?
    It's important to have some kind of software ?
    Thanks
    Ronen

    Please see their answer regarding my question :
    Thank you for contacting APC’s Customer Care Team. We are here to ensure that your query is resolved as quickly as possible. Please find our response to your query below.
    Dear Mr. Z,
    Thank you for contacting APC.
    The compatibility of the UPS with an OS is dependant on the installed management software the UPS communicates with.
    1. BR900GI - PowerChute Personal - no compatibility with OSX, please find the compatibility chart below:
    http://www.apcmedia.com/salestools/JNOE-7GSAQJ/JNOE-7GSAQJ_R11_EN.pdf
    2. SUA750I - PowerChute Business Edition - no compatibility with OSX, please find the compatibility chart below:
    http://www.apcmedia.com/salestools/ASTE-6Z5QEV/ASTE-6Z5QEV_R37_EN.pdf
    Alternately, if you install a network management card (AP9630 or AP9631) in the SUA750I, it will be able to communciate with the PowerChute Network Shutdown software. This is compatible with Mac OS X Server 10.7.2 x64:
    http://www.apcmedia.com/salestools/SJHN-7AYQNP/SJHN-7AYQNP_R41_EN.pdf
    http://www.apc.com/resource/include/techspec_index.cfm?base_sku=ap9630
    http://www.apc.com/resource/include/techspec_index.cfm?base_sku=ap9631
    Please let me know if I can assist with any further info.
    Kind regards
    <Personal Information Edited by Host>

  • I moved from the UK to the US with my iMac. What do I need to buy for the UK iMac to work in the US? A power convertor? A plug convertor? or Both?

    I moved from the UK to the US with my iMac. What do I need to buy for the UK iMac to work in the US? A power convertor? A plug convertor? or Both?  I had previously read that you only need a plug convertor (three prong to two prong).  But I'm terrified that my iMac will blow up if I only use a plug convertor and not some sort of voltage convertor (Transformer).

    I'm not really hardware tech savy - is it easy to pop out the UK power cable and plug in the US power cable? Or do I need to get someone like an iMac support guy to do this? And because of the voltage difference, is there something built into the iMac that takes care of the voltage difference for me?  Thanks!!

  • Recommendations, please, for external DVD writer for my 2006 iMac. (Internal drive unable to write coherently.)

    Recommendations, please, for an external DVD writer for my 2006 iMac whose internal drive is writing unreadable discs. 
    Model Name:          iMac
      Model Identifier:          iMac5,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.16 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          4 GB
      Bus Speed:          667 MHz

    Thanks, A Brody.  Don't know what the PRAM battery is.  Here are more details of the fault ... Although I've had the iMac for 5 years this may be the first time I've tried copying a video recording onto the DVD drive (I've made lots of CD copies without a problem).  The folder and files all seem to be reproduced in identical order on the disc but my domestic DVD player cannot make sense of the recording, unlike the original source DVD from which the files originated.  The drive has always been noisy but I've never assumed it shouldn't be!  Does this fit your PRAM battery theory?  If so, please explain more.  Thanks.

  • I purchased Photoshop cs5 a while back in disk form for my old imac. Now my new laptop doesnt have a disc drive... can I get the program onto my new computer? I don't have the box, but have the old computer it's on...

    I purchased Photoshop cs5 a while back in disk form for my old imac. Now my new laptop doesnt have a disc drive... can I get the program onto my new computer? I don't have the box, but have the old computer it's on...
    also had a friend place inD and Ai on my old laptop and am curious to know how to get it to my new one

    As long as you have your serial number, you may download and install
    OLDER previous versions http://www.adobe.com/downloads/other-downloads.html

  • I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device.  But I have a Conceptronic router.  Will Time Capsule work with this and how?

    I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device.  But I have a Conceptronic router.
    1. Will Time Capsule work with this and how?
    2. Can my printer USB be plugged in and then shared between the devices?
    3. Can I create a network and how?
    4.  What happend when a visitor logs onto my existing wireless router?
    I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical.  Any help / advice will be much appreciated.
    Ray

    The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router.  I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
    You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

  • I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

    I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

    If it won't turn on then the monitor is dead (power supply?, video circuits?).  Not worth repairing.
    If you have a new iMac then it has thunderbolt.  So exactly what is that monitor you are trying to connect?  For TB you can connect a mini-displayport monitor.   Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter.

  • Where can I get an EPSON printer for the original iMac?

    Where can I get an EPSON printer for the original iMac?

    You should look for an Epson Stylus Color 740 or the higher-end 900 or 980, which are about 12 years old now.  All have USB connectivity, and while the 900/980 is a better/faster printer, it's harder to find the ink tanks for it at the usual office supply stores.  Ink tanks for the 740 series seem to be more readily available, without a special order.  There were Mac versions of these printers (the 740i and 900i), with blue/ice housings that were color-keyed to match the fruit-colored "blueberry" iMac and Blue & White G3 mini-tower.  There was no Epson printer that was color-keyed to the original Bondi Blue iMacs.

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

Maybe you are looking for

  • Subtotal in alv grid

    hi friends.. how to maintain subtotal (group of fields) in  alv gird display. we have two fields in our report. filed2 is editable mode. see the below the example.. eg: field1    field2    abc      100.00 abc      200.00 abc      300.00 bcd      100.

  • My iPad randomly goes black

    I Have iOS 7.0 on my iPad. My iPad is two years old.  In the last few days it randomly goes to a black screen when I am on games, email, etc.  HELP!!

  • Value miss match

    Hi Gurus, Anyone help me in reportingside. here i am facing a problem when query execution.I had developed a query on Stock Category satement.In that query i took quantity(0VALSTCKQTY) and value(0VALSTCKVAL).These two are Non-cummulative keyfigures.

  • Error message at the end of intallation for itunes

    At first I was not able to update my iTunes so I uninstalled that and now I am trying to install the new itunes, and the same error message that came up when I tried to update the iTunes appears. It reads 'Microsoft.VC80.CRT,version="8.0.50727.4053",

  • Question about Cisco SAFE Architecture....

    All, I have searched high and low on the following question for a master's class and hope someone can answer or point me in the right direction. I have studied Cisco of the last many weeks and our professor asked us whether or not the SAFE architectu