S_PL0_86000030 not showing proper display

S_PL0_86000030 display get change
balance c/f to Accumulated balance there are 7 columns
but now showing only three columns 1)debit bal 2)credit bal 3) accumulated bal.
how do i get all seven columns?

Hi
When you run the Transaction: S_PL0_86000030.. at the bottom of the Selection Screen you have 3 Option for Output Type:
1.Graphical Report Output
2.Classical Drilldown report
3.Object list
You can choose Graphical Report Output or Object List and then run the report.In the report screen click the Change Layout button and in the pop-up screen you can select the desired column fields you need and drag it on the left.This will give you the desired output you need.
If you wanted it to be your default layout then save it and use it whenever you run the Transaction.
Regards
Andrew

Similar Messages

I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium

Vendor does not show in Display Vendor list

Hello SRM Experts,
I have a problem where I can see the Vendor in BP but I am not able to find this Vendor on the display vendor list on the web.
In BP, I can see that "Display in BP role" for this Vendor is "Business Partner (Gen.)" and not "Vendor".
Could this be the reason that it does not show up?
Also we dont have this vendor in VENMAP table but it is in BUT000.
Please advise.
Thanks and Regards
Aaarvi

My apologies for not being clear.
I meant in EBP, while creating a shopping cart, we select the Vendor. While selecting we have the F4 option.
I do not see the mentioned Vendor in this list, but I can see this in BP transaction. This Vendor also exists in ECC.
Per my investigation, I cannot this Vendor in VENMAP but is there in BUT000. Also as mentioned previously, the type is different for this Vendor.
Please advise.
Thanks and Regards
Aaarvi

Why not showing proper remaing HD space?

I was using my mac and I checked the HD space and it said 28GB remaining and then 5min later without me adding any other files it told me 22GB was remaining.
Why did it show inaccurate display space remaining?
Thanks.
Dorian

Apple's built in search tools (Find or Spotlight) can search by modification dates. But that's really not the most efficient way to do a backup.
I'd recommend SuperDuper for that. The free version clones to an external drive, the $28 licensed version performs "SmartUpdates" (incremental backups that are faster becuase they synchronize changed files only).
http://www.shirt-pocket.com/SuperDuper/
EDIT: Wow, I'm faster with my fingers than usual in this thread!

S_PL0_86000030 not showing profit center

General Ledger: Totals table FAGLFLEXT not updated with profit center.
S_PL0_86000030 report not showing profit centers.
Regards,
Praveen Lobo

Hi
When you run the Transaction: S_PL0_86000030.. at the bottom of the Selection Screen you have 3 Option for Output Type:
1.Graphical Report Output
2.Classical Drilldown report
3.Object list
You can choose Graphical Report Output or Object List and then run the report.In the report screen click the Change Layout button and in the pop-up screen you can select the desired column fields you need and drag it on the left.This will give you the desired output you need.
If you wanted it to be your default layout then save it and use it whenever you run the Transaction.
Regards
Andrew

Report not showing proper output in apps 11i

Hi,
I am new to oracle Apps 11i. I Have created customized reports . But Layout showing in builder and oracle apps 11i are different. The differernce is distance between the fields. Also labels and fields not showing full (truncating) value. But the same report giving proper output in repots6i builder.
(i.e all customized reports layout showing 1/2 the width in oracle apps 11i)
I will appreciate if somebody can give me some suggetion regarding this issue. Also I would like to know any template avaliable for 11i reports development.
Regards

hi,
please make sure that in report builder fields must not contain any bold text , any line or any color b'coz apps11i reports are character mode reports hence if ur report contain any of these mentioned above give format different from the one it shows in report builder. u have to add one by one field and and run the report in apps environment .. in this way u have to move forward... guess it will help u....

When mirroring keynote with my iPod air 2 the presentation will not show on display in presentation mode

When I mirror a presentation on my iPad air 2 to a TV the content will not show in presentation mode. It will show in edit mode.

Same problem here - 80 gb classic and same thing happened to me this week - plays fine alone - when hooked to computer says it needs to be reformatted and then when i try to reformat i get error 1415 can't reformat - this is bs and im not shelling out for another ipod - why would it work fine but when connecting it to windows suddenly not work> I think Itunes 10 has got some issues

3750 not showing proper traffic statistics

A colleague of mine has a 3750 switch which he is doing routing on.
He has noticed that traffic statistics are not showing using 'show interface vlan x' or using MRTG graphing.
Any way to get these statistics back ? I've never seen the behaviour myself so I thought I'd ask for him.
Thanks,
= K

Sounds like you are getting some data, jut not performance data(?) so I would not suspect the agent.
Check your binaries on the agent - you should have 2 or 3 with root permissions and the sticky bit turned on.
Make sure you have the new port numbers being used since the agent should now be connecting via the secure port (this looks to already be the case from your post)
Hit the url from the web browser:
https://<agent-host>:1830/emd/main
Any firewalls between you and the oms?
Does the agent know the oms dns/ip?

HT201401 My IPhone5 is not showing any display at all...........It's all black & am unable to see any apps etc etc

My IPhone5 is not showing any of my apps etc.........it's a completely dark screen

My IPhone5 is not showing any of my apps etc.........it's a completely dark screen

Aperture not showing up / displaying in Mail Photo Browser in Leopard 10.5

This is for anyone who upgraded to Leopard 10.5.1 and wanted to use Mail's Photo Browser to insert Aperture pics into mail messages. At first, it only displayed the iPhoto and Photo Booth folders in Mail's Photo Browser on my Powermac but I remember seeing it in the Apple store.
If you already generate previews in Aperture, this is pretty much a non-issue. But for me, it frustrated me for a long time. To make it work, the previews must be set in Aperture. I turned it off because it used up extra HD space.
In Aperture, you need to check the "Share previews with iLife and iWorks" under Preferences. Then decide which size and quality of a preview you want. The larger the size and quality, the better it will turn out when you use it in the photo browser. This dictates the image size and quality of what is imported into your Mail message. (I used the smallest size and a quality of 7, which gave satisfactory results without making the aperture library grow too much). I figured it I wanted to email a large, I could attach it separately via a standard export from Aperture. Don't go too low on the quality as it will not turn out very good.
Remember to go and generate previews for each folder or pictures, as those are the only ones that will show up in the Mail photo browser. The folders will show up but no pictures if you don't generate the previews.
It takes a minute before it refreshes in the Mail Photo Browser. Just play with the different settings and put them into your mail to compare the results.

I had a similar problem and what I found was that I had some corrupt .avi files. Once I removed them all was well. I had to create a new iPhoto library and hunt and peck. I would drag part of the old library into the new library then see if iTunes would see the photos - once it froze then I knew what part of the iPhoto library to look at.
MJ

SYSDATE not showing proper date

Hi,
am using sysdate in my procedure. but sysdate is returning the previous day date and I checked the date set in my computer, its proper. I really don't know why sysdate is showing previous date. Plz can anybody tell me what's going wrong here...

The NTP (network time protocol) daemon on the Oracle server is either not running, or configured incorrectly.
You need to raise this problem with the o/s administrator of that server. The Oracle database instance uses the o/s date and time. The Oracle database has no control and no idea whether what the o/s reports the date time to be, to be correct or not. Keeping date and time is the o/s's responsilbility - not Oracle's.
And at o/s level, this is managed via syncing the o/s date and time with servers that are tasked (amongst other things), to keep accurate time. In order to perform this sync, NTP is used. A local NTP daemon (background server process) needs to be configured and activated in order to perform this sync.
You will find a similar NTP daemon on your client platform (Windows?) that is sync'ing with the time servers on your network.

Top bar does not show for displaying PDFs in browser

The top bar (the one that has: File-Edit-View-Documents-Tools-Window-Help) displays when the Preference is set to NOT display PDFs in my browser. But when I set the Preference to display PDFs in my browser, the top bar does not display.
How can I get the top bar to display when my Preference is to display PDFs
in my browser? That is the manner in which I use Acrobat Reader 90 percent of the time.
I am using Acrobat Reader 9 which I just downloaded yesterday, my operating system is Windows XP (with Service Packs 1 and 2) and my browser is Internet Explorer.
Can anyone here help me? Or is there a better place to get help on this?
Milton Beychok

Well the problem is that, in Windows, the menu bar is owned by the application. When you view the PDF in the browser, the browser owns the menu bar and chooses what to show. Hence it shows only the browser items and not the Reader menus. If you view it outside the browser, Reader is running stand-alone and shows it's menu items.
I think, all you can do is show make sure the button bars you want are exposed by default.

Dvt bargraph not showing proper data on x axis

hi,
I am using a <dvt:barGraph> on my jsff page. It reads data from the viewObject. On x axis, i have set the values as date. For the very first bar, it displays the date correctly in format 'dd-month-yyyy' but for all the subsequent bars, it just shows the date i.E. just 'dd'.
can anyone help plz?
code:
<dvt:barGraph id="graph1" value="#{bindings.viewObject11.graphModel}" subType="BAR_VERT_STACK"
inlineStyle="height:160px; width:100%;" seriesEffect="SE_GRADIENT"
seriesRolloverBehavior="RB_HIGHLIGHT" threeDEffect="true"
contentDelivery="immediate" imageFormat="PNG" >
<dvt:background>
<dvt:specialEffects/>
</dvt:background>
<dvt:graphPlotArea/>
<dvt:seriesSet>
<dvt:series/>
</dvt:seriesSet>
<dvt:o1Axis/>
<dvt:y1Axis />
<dvt:legendArea automaticPlacement="AP_NEVER"/>
</dvt:barGraph>
jdev version:11.1.1.4.0
Edited by: user12333779 on Feb 10, 2012 9:30 PM

Hi Abhishek,
For your questions, please check the listed items as below:
1. The Cumulative Flow Diagram shows the flow of the items on your backlog, and it will only show the last 30 weeks of data. You can check the links below for more information about cumulative flow diagram:
http://blogs.msdn.com/b/visualstudioalm/archive/2006/01/12/511845.aspx
http://adiws.blogspot.com/2012/04/scrum-for-team-system-product.html
2. If you want to check the work item status work items in a particular period, seems it's not available for TFS 2012. You can use work item query with start date and finish date and then create a chart by the query if you use TFS 2013 Update 2 or above.
Check this page
for more information.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ALV header not showing in display

Hello experts,
This problem has been bugging me for quite some time. I modified a report to be shown in ALV format. Now, when I execute the report the header does not display. Anyway, I have pasted below my code so you guys might see if I'm missing something. Help would be greatly appreciated. Thanks guys and have a nice day!
FORM display_alv.
PERFORM f_build_comment USING gt_list_top_of_page[].
PERFORM f_build_layout USING gs_layout.
PERFORM f_init_fieldcat USING gt_fieldcat[].
PERFORM f_init_events USING 'TOP' gt_events[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
       EXPORTING
            i_callback_program      = g_repid
            i_callback_user_command = 'USER_COMMAND'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
       EXPORTING
            it_fieldcat = gt_fieldcat[]
            is_layout   = gs_layout
            i_tabname   = 'IT_ZTS0001'
            it_events   = gt_events[]
            it_sort     = gt_sort_del
            i_text      = '1ST'
       TABLES
            t_outtab    = it_zts0001.
gt_print-reserve_lines = 2.
gt_print-no_coverpage = 'X'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
       EXPORTING
            is_print = gt_print.
ENDFORM.                    " DISPLAY_ALV
      FORM f_build_comment                                          *
--> %TOP_OF_PAGE                                                  *
FORM f_build_comment USING %top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader,
        d_name(60),
        lv_date(10),
        lv_time(10),
        lc_dttm(50).
**-REPORT NAME
CLEAR: d_name, ls_line.
MOVE: sy-title TO d_name.
ls_line-typ = 'H'.
ls_line-info = d_name.
APPEND ls_line TO %top_of_page.
**-USER ID AND DATE/TIME
CLEAR: d_name, ls_line.
CONCATENATE: 'Generated by:' sy-uname INTO d_name SEPARATED BY space.
ls_line-typ = 'H'.
ls_line-info = d_name.
APPEND ls_line TO %top_of_page.
CLEAR: d_name, ls_line.
WRITE: sy-datum TO lv_date MM/DD/YYYY,
         sy-uzeit TO lv_time USING EDIT MASK '__:__:__'.
CONCATENATE: 'Generated on:' lv_date lv_time
    INTO d_name SEPARATED BY space.
ls_line-typ = 'H'.
ls_line-info = d_name.
APPEND ls_line TO %top_of_page.
ENDFORM.                    " F_BUILD_COMMENT
      FORM f_build_layout                                           *
--> %LAYOUT                                                       *
FORM f_build_layout USING %layout TYPE slis_layout_alv.
%layout-zebra             = 'X'.
ENDFORM.                    " F_BUILD_LAYOUT
      FORM f_init_fieldcat                                          *
--> %FIELDCAT                                                     *
FORM f_init_fieldcat USING %fieldcat TYPE slis_t_fieldcat_alv.
DATA: lc_fieldcat TYPE slis_fieldcat_alv.
CLEAR lc_fieldcat.
DEFINE m_field.
    add 1 to lc_fieldcat-col_pos.
    lc_fieldcat-fieldname   = &1.
    lc_fieldcat-outputlen   = &2.
    lc_fieldcat-seltext_l   = &3.
    lc_fieldcat-do_sum      = &4.
    lc_fieldcat-inttype     = &5.
    lc_fieldcat-hotspot     = &6.
    lc_fieldcat-fix_column = &7.
    lc_fieldcat-ddictxt     = 'L'.
    lc_fieldcat-no_zero     = 'X'.
    append lc_fieldcat to %fieldcat.
END-OF-DEFINITION.
m_field 'KUNNR' '12' 'Customer Number'        '' '' '' ''.
m_field 'CD_SEQ' '12' 'Code'                  '' '' '' ''.
m_field 'ZADDRESS' '12' 'Address'             '' '' '' ''.
m_field 'ZCPERSON' '12' 'Contact Person'      '' '' '' ''.
m_field 'ZCNUMBER' '12' 'Contact Number'      '' '' '' ''.
ENDFORM.                    " f_init_fieldcat
      FORM f_init_events                                            *
--> P_TYPE                                                        *
--> %EVENTS                                                       *
FORM f_init_events USING p_type CHANGING %events TYPE slis_t_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            i_list_type     = 0
       IMPORTING
            et_events       = %events
       EXCEPTIONS
            list_type_wrong = 1
            OTHERS          = 2.
IF sy-subrc = 0.
    PERFORM f_build_events USING: slis_ev_user_command.
    IF p_type = 'TOP'.
      PERFORM f_build_events USING: gc_top.
   ELSEIF p_type = 'SUM'.
     PERFORM f_build_events_sum USING: gc_topsum.
    ENDIF.
ELSE.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " F_INIT_EVENTS
      FORM f_build_events                                           *
--> %EVENT                                                        *
FORM f_build_events USING %event.
READ TABLE gt_events WITH KEY name = %event.
IF sy-subrc = 0.
    MOVE: %event TO gt_events-form.
   MOVE 'USER_COMMAND' TO gt_events-form.
    MODIFY gt_events INDEX sy-tabix.
ENDIF.
ENDFORM.                    " F_BUILD_EVENTS
      FORM top_of_page                                              *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            it_list_commentary = gt_list_top_of_page.
ENDFORM.

Hi,
Using ALV_BLOCK you can append multiple internal table and display them in one shot.
With ALV Grid you cannot do that, but the output is more prettier than a list. It will look a excel sheet.
Look at the layout values you are passing for the size of the ALV.
Regards,
Ravi
Note : Please mark the helpful answers

Elapsed-Time Meters not showing proper time in spreadsheet.

Using Lookout 6.1
A couple of different issues.
I am using ETM to record pump run hours. This part works very well.
Where I run into problems is when I use a spreadsheet to record the values.
In the Spreadsheet1 object I set the ETM1 format to HH:MM and yet in the 'Spreadsheet1.csv ' pump 1 shows 2015:12:55 (Hours are right) but I don't understand why it will not transfer just HH:MM. Yet in the same Spreadsheet1 object I take another ETM2 and set the format to HH:MM it shows 52365:45 (Hours are right).
I then use Spreadsheet2 to grab the data once a month to record daily pump hours.
However if I try and and do any math formulas with ETM2 they do not work. (Formats are set HH:MM)
The ETM1 formulas work and takes the raw data 2015:12:55 and formats to HH:MM.
Does it stop working because the ETM reaches a too high number?
Side note: If I create a new ETM can I input hours somehow to reflect exsisting run hours?

I would suggest using SQL & ODBC to get the runtime hours based on your digital monitor, instead of the ETM timer.
http://zone.ni.com/devzone/cda/epd/p/id/2001
Good luck.
Mike
Forshock - Consult.Develop.Solve.

S_PL0_86000030 not showing proper display

Similar Messages

Maybe you are looking for