S-video 4 and 7 pins

Hi all,
I purchased a S-video cord (which has 4 pins) to connect my iPod to my TV, and it didn't work. The output in the dock has 7 pins. What are the differences between the two sorts of s-video and why didn't it work with 4 pins?

The 7 pin connector also carries composite video. The s-video pins however should be compatible. Make sure you have TV out switched to ON on your iPod, and make sure your TV is looking at the right s-video port. For full wiring details see :
http://pinouts.ru/data/svideo7pinpinout.shtml
regards
Brian

Similar Messages

I need to connect Lightning to RCA componet for both Video and Audio

I have an Ipad 2nd generation and use a 30 pin to RCA Componet adapter from rockfish and its work great for video and audio. I now have a IPad mini 5 gen and I bought a lightning to 30 pin adapter and tried to use my Ipad mini to watch video and audio. Audio works but video does not. Does anyone have a solution for this for the new Ipad Mini and iphone 5s.

Nope.
There is no lightning to RCA.
The 30 pin adaptor clearly states it does not support video out.

Anyone shoot music videos and use imovie to edit?

Hello all. I just recently bought a panasonic gs320. Its a consumer camcorder but has 3ccd and the video looks pretty good. I work with a friend who does music and I agreed to shoot some simple videos for him for youtube. I've never used imovie but I've been playing around with little clips I have of him. Now I would like to have him rap one of his songs. I have all of his music in itunes that I ripped from cd's he's given me. I should be able to go ahead and import the audio from itunes correct? Also, how difficult will it be to lay down the track and lock it in place, and add different shots of video and sync them together? For starters, he has a freestyle that he did that's about 2 minutes long. I just want to get him in a nice little setting and take different shots of him rapping. Then import the different shots in imovie and cut back and forth between different scenes. Kind of give that feeling like he had more than one camcorder filming him. Sorry for blabbing on, I just wanted to see if any of the board members have done anything like this.

Hi
Well this can be done in iMovie HD 6 but not the tool I would use. Favour FinalCut Express.
Here You are much more free with multi video tracks (and audio).
A. Use the CDs - don't use the iTune music. Using .aiff audio from a CD is so much
better and gives so much less problems.
B. Recording Your friend several times playing same tune and from different angles,
close-up and establishing (full view) perspectives - gives You lot's to select from.
C. Now You (at least I would) lay down the audio track first then You add clip after
clip till You built Your movie. Using in and out points is a pro way and it makes it
easier to make adjustments.
WHY I favour FCE: In iMovie You can't fix the video clips regarding time and the
audio clips can only be pinned to the video clip above.
Very hard to keep the Cake stable. In FCE a clip stays where You set it.
No clip = black or silent (video or audio)
Cost - Yes but You get so much that I was amazed when I found out the power of it.
Yours Bengt W

Video and audio chat not working

Hi All,
I also have problems with iChat. I tried it before leaving home with two macs on a wireless network. Worked well. Im now overseas and the text chat works ok but both the video and audio chat fails to work. The buddy receives the telephone tone informing him that im trying to chat and once accepted the chat fails and the error message is "buddy failed to respond". Not sure what to do to get this working. Please help as it worked from room to room but not country to country???

Hi,
The Log can be expanded when it pops up and the top part of the log can help us to pin point things for you.
The Logs are also stored in User(your account)/Library/Logs/iChatConnectionErrors
Error 8s refer to port and NAT issues.
The details can isolate where to some extent.
We will need to know the connection device you are using at both ends (Modems and routers) ?
How you have set them up (DHCP, Ports opened, methods used) ?
What you have done on each mac to set up iChat and the Mac for iChat
4:30 PM Saturday; November 17, 2007

Unbale to view videos and pictures from 8500 curve to my PC

Hi,
I am unable to run Videos nor i am able to view my pictures taken from 8500 (both videos and pictures) when i transfer them to my pc. Plz suggest what needs to be done.

Well... could you say why you can not view your videos or pictures on the PC?
Do you get an error message?
What happens?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went tblack screen with error messages. Rebooted 5x, won't go paspinwheel

I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went to black screen with error messages. Rebooted 5x, shot off power source, disconnected external devices... Now won't go past pinwheel... Since it does not go to black screen, I cannot convey error messages... Please advise what I could try... Thank you... I have an iMac 2009... Upgrade operating system to new system this spring... Don.

It is guitardad's again... I read past topics on this issue... As I am not overly computer savvy, I want to be careful that I don't mess things up further... Of course the extended warranty is done... There is talk about booting from the system disc... I'm not sure if this is the first thing to do or not... Can the support community, advise me on what logical steps I should take ( in order) or direct me to a website and/ or you tube video that walks one safely through the processes... Once again thank you for reading and offering your advice... I am on fixed $$$ so I'm trying to avoid calling apple, unless I have no options and/or the suggestions do not resolve the issues... Tx again Don.

Video and Image Share resize

Hi!
As a Z10 user I do not find an easy way to share my video by mail. I had to upload it to Box and send it from my computer.
Do you know a way?
As a Cascade developper I'm thinking about developping an open source app to do this:
My app would be registered as a sharing application
It will just crop/resize the video, the image, or zip the file/folders according to the user need and redirect to another sharing application with the same attributes, except the new downsized sharing data
Any guy would be interested to use it or to tell me about a already existing app with similar features?

Hithredin wrote:
As a Cascade developper I'm thinking about developping a open source app to do this:
My app would be registered as a sharing application
It will just crop/resize the video, the image, or the zip the file/folders according to user need and redirect to another sharing application with the same attributes, except the new dwonsized sharing data
I think that app would be quite popular. I've seen the video AND picture res-sizing request many times. Some of the photo editing apps will resize, but not easily share from the app.
A simple image/video downsizing or reducing file size function > Share would be nice.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Does DVI to Video adapter send both s-video and composite simoutanesly?

Hi,
I´m wondering if you connect the DVI to Video adapter on the new MacMini (DVI to s-video+composite), does the Mini send BOTH s-video and composite at the same time?
If connected to TV and projector, I want to see both simotanesly, not neede to change something in the setup...
The both having same resolution I guess is a must!
Regards,
Pat

Yes, many think, but i´ve havnt heard anyone whoose sure?! Can´t be such a odd thing, connect a Mini to two displays at same same time...

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

trying to login to software program known as hamspher (vip simulated ham radio, it downloaded the program but it will not allow me to login with call sign and pin. it has to be opened with what they call a jar file. how do i do this?

This is compatible with Mac? Especially Snow Leopard (if that is what you'e running)?
Have you considered posting your question in their forums?
Here is some information re. the jar file:
http://ostermiller.org/opening_jar_files.html

Purchased videos and music not playing on ipod

i purchased some music and videos, while using my wifes powerbook g4, loaded them onto my ipod (which i had setup using my pc) now i see the music and videos and when i try playing them the music shows up then goes to the next song. the videos just go to a black screen.
now i have loaded my cd's onto my wifes powerbook and have been able to play them on my ipod no problem. just the purchased music/videos from itunes, is not playing
what did i do wrong.

Did you update the firmware on the iPod? Supposibly if fixes a few bugs.
http://www.apple.com/ipod/download/
If you didn't then try that. Believe me your problem is not with not using that CD as I never even popped the disk in my CD drive untill after I had updated my iPod as the software was outdated before it arrived at my house.

Exit out of video and return to stage frame 1

Ive manged to create a flash player that incorporates a video
using a online
tutorial with the code below.
All is working well but at the end of the video I want to
exit out of the
video and return to the stage at frame 1. The reason being
is; before a user
hits play an interface image (containing info) is displayed.
When they hit
the play button the video appears and plays over the
interface image.
problem is at the end of the video the layer containing the
image is still
covered by the video. when the video finishes I need a line
of code to exit
and return the player to the original state without the
presecence of the
video layer.
any ideas? thanks in advance
Brett
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
rewindButton.onRelease = function() {
ns.seek(0);
ns.play();
playButton.onRelease = function() {
ns.play("modular.flv");
pauseButton.onRelease = function() {
ns.pause();
var videoInterval = setInterval(videoStatus,100);
var amountLoaded:Number;
var duration:Number;
ns["onMetaData"] = function (obj) {
duration = obj.duration;
function videoStatus() {
amountLoaded = ns.bytesLoaded / ns.bytesTotal;
loader.loadbar._width = amountLoaded * 200;
loader.scrub._x = ns.time / duration * 200;
var scrubInterval;
loader.scrub.onPress = function(){
clearInterval(videoInterval);
scrubInterval = setInterval(scrubit, 10);
this.startDrag(false,1,this._y,198,this._y);
loader.scrub.onRelease = loader.scrub.onReleaseOutside =
function () {
clearInterval(scrubInterval);
videoInterval = setInterval(videoStatus,100);
this.stopDrag();
function scrubit() {
ns.seek(Math.floor((loader.scrub._x/200)*duration));

Inside the videoStatus() function Check the Current Time and
Total time for video completion. Some time the Video doesn't have
exact Time when comparing to the Total duration so use Math.floor
to compare. if you still facing problem also check the Buffer
status and Video status too.

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

HT4623 I tried doing my update and it told me I don't have enough storage, so I deleted all of my apps, photos, videos, and music. And it's saying I still don't have enough storage. Any suggestions?

I tried doing my update and it told me I don't have enough storage, so I deleted all of my apps, photos, videos, and music and I still don't have enough storage. Any suggestions?

Do you memeber the complete wording of the error message?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I'm trying to download netflix aand it keeps telling me not emough space to delete videos or pictures but i have no videos and have only 60 pictures. any help?

I'm trying to download netflixs to my ipad but it keeps telling me to delete videos or pictures. I have no videos and have 60 pictures. I need some help.

What may be taking up your iPad's memory may be not photos or videos, but rather music and apps. Music itself should not be that much of a problem but if you have a very large library it will obviously take lots of space. Your iPad tells you to delete photos or videos because you can delete them from the iPad directly, but you cannot delete music until you sync to iTunes. You may also want to try deleting some apps such as games; these usually take lots of space (up to 1GB each). These apps will sync back to your iPad when you have access to a computer once you have freed up enough memory on your iPad.
Hope this helps.

S-video 4 and 7 pins

Similar Messages

Maybe you are looking for