S-Video adapter and analog TV works with OSX 10.5 but not Boot Camp 2.1(XP)

I bought a mini-DVI to S-video or composite adapter to use with an older analog TV. Works great with OSX 10.5 no problems. However, I currently have Windows XP running with Boot Camp 2.1 and it wont work with the TV. If I ever get an image it's three black and white fuzzy and distorted iterations of the monitor.
Since it works with OSX but not with XP i'm thinking its some sort of boot camp issue and not a problem with the hardware or adapter. Therefore, it should be solvable, right? Does anybody know how to fix this? Will upgrading to snow leopard and boot camp 3.1 solve it?

Perform a custom install from the Mac OS X 10.5 disks and install only that component if possible; if not, use Pacifist to install it. In either case, rerun the combo updater for your Mac OS X version afterwards.
(38032)

Similar Messages

My iphone 4 microphone won't record sound on video clips and doesn't work with Skype

This is the first time I have used the forum. My iphone4 microphone won't record sound on video clips, and won't work with Skype.

I have checked that I have the latest software. I have restarted phone. I am not sure how to perform the other things you mentioned , restore and reset as new... Would I lose any data by doing these? Thanks for the reply.

IPod nano works with USB 1.1 but not USB 2.0

Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

I have a similar problem with the following configuration:
- Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
- PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
What works well?
- All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
- iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
- iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
What doesn't works?
My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
- Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
- iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
- iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
Help!!!!!!!!!!!!!!!!

Nothing will print. My printer works with every other program, but not this one!

Nothing will print. My printer works with every other program, but not this one!

I see the printer, in blue when I click on the hardware tab. Actually there are 2 things listed that have to do with the printer.
The first one is called:
HP Photosmart Prem C410 series (DOT4PRIN.... and under the Type it is listed as IEEE1284.4...
The next is listed as:
HP Phototsmart Prem C410 series and under the Type heading it says Printers.
I don't know which one to pick. So when I choose the name highlighted in blue, what do I do to change the name?

On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Email account. What is causing this and what do we need to do to resolve it?

On 3G we cannot send Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all. Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine. We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this.

Contact whomever supports the email account and get the correct Outgoing email server settings from them.

My Xbox Bluetooth headset works with my iPhone 4,but not my iPhone 4s,help please!?, My Xbox Bluetooth headset works with my iPhone 4,but not my iPhone 4s,help please!?

Please help,my Xbox headset works with my iPhone 4,but not my 4s,any ideas why?

make sure you disconnect it from 1 before trying to connect it with the other or it will fail

IPod works with USB 1.0 but not 2.0?

I'm trying to get my cousins iPod Shuffle working for her but I'm not having much luck...
When I plug it in to any port on the computer, I get "USB Device Not Recognized" and it shows up as an "Unknown Device" in Device Manager.
However, if I disable "Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD" in Device Manager it immediately detects the device and it'll work with iTunes.
What do I need to do to get this to work with USB 2.0? What could be causing the problem? Thanks!

No, the fact that they haven't needed to update the drivers means they work perfectly well.
If they work perfectly well, how come they cannot pick up the iPod (which has nothing to do with iTunes)?
Also, how do you know they haven't needed to?
More likely they simply haven't even looked at them to see if they need updating.
Oh, and from the first post...
"However, if I disable "Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD" in Device Manager it immediately detects the device and it'll work with iTunes."
But enough of this.
Good luck with your problem.
Hope you get it fixed.

Macbook (White 2010) works with 5GB of RAM but not 8GB

I bought 2 x 4gb modules the other day. I tried to install them both on my macbook which although supposedly supports 4 gb of ram but others have proven it will support up to 8gb. I installed them then booted up my Mac but it would not start it merely kept beeping.
However when i used one of the modules with one of the previous modules i.e 5gb in total, my computer turned on and is working. Why don't both of the modules work together? How come I am unable to get 8gb of RAM but I am able to get 5gb? Both modules work when i use them with a 1gb module, but they don't work together. Any Advice?

Yeah the 4gb is being recognised, my mac is running off the 5 gb in total. True, but i've seen videos where people have the exact same mac as me and have 8gb RAM. But yeah thanks for your help guys

HP LaserJet 3 compatible Epson worked with OSX 10.4, but broke w/ 10.6

Hi. I have a mac mini intel which used to run OSX 10.4. The printer is an Epson ActionLaser 1500 laserprinter (very old), which is running in a compatibility mode for the HP LaserJet 3. I was able to but a USB-to-parallel port adapter, and this printer was working fine with this set-up under OSX 10.4 after configuring the printer to work through CUPS. This was by selecting the printer in CUPS under 10.4 then selecting the HP LaserJet 3 driver. Worked fine.
I updated the system software (clean install) to OS X 10.6, and now I can no longer get the printer to work using the same USB-to-parallel port adapter and the same general setting.
Under 10.6, attempting to set-up through the standard "Add Printer" preferences panel shows a printer "USB2.0-Print" but waits perenially, with a message "Printer is offline." Selecting the driver manually from a list via "Select Printer Software...", the printer still cannot be added to the list of available printers.
Trying via CUPS under OSX 10.6 (the way I got it to work under 10.4), presents a printer option "USB2.0-Print (USB2.0-Print)" which when trying to add the printer, connects to "usb://Unknown/USB2.0-Print?location=1d100000." I can once again select the compatible HP LaserJet 3 driver here (since the printer is running in compatibility mode) which was the one that I used before under 10.4. In this case, the printer is added to the available printers list in various applications and in the "Print and Fax" preferences pane. However, when I then try to print a document, the print queue for the newly added printer opens, and the job is added to the list, but the printing goes nowhere and is stalled with the notifications "Printer is offline" and "Printer offline."
I tried resetting the printing system, rebooting, and even installing usbtb. Usbtb wasn't able to recognize the printer either, and when trying to select a driver manually during the usbtb install, HP LaserJet 3 wasn't an option. Still, no dice.
I have read on the internet, that the "usb://Unknown/USB2.0-Print?location=1d100000" location indicates that the printer is not recognized.
I was able to look into the old leftover system files for OSX 10.4 remaining in "Previous systems" after the upgrade, and to open Library/Preferences/org.cups.printers.plist . This shows a device uri of usb://Unknown/USB2.0-Print%20?serial=0 for a printer with the name of my printer in my old install when it used to work under 10.4 . Obviously, this is not looking the same as what CUPS is coming up with now.
Is there a configuration-based solution to this problem?
If not, would a different adapter work? Can anyone recommend a USB-to-parallel or USB-to-serial adapter (my printer has both parallel and serial ports) that will cooperate with my printer and OSX 10.6 with a minimum of fuss? I'd rather not use usbtb but will try again if I have to. I'm somewhat concerned that usbtb may not work with this printer because neither the HP LaserJet 3 nor the Epson ActionLaser 1500 were presented to me as driver options when trying to install usbtb.

when you add the printer via cups, are you able to add the "?serial=0" ?
ie usb://Unknown/USB2.0-Print?serial=0?location=1d100000

My flashdrive only works on one of the usb port. the other usb works with my iphone charger, but not my usb. any suggestions? should i take it in? its a brand new laptop.

My flashdrive only works on one of the usb port. it will not work on the other usb port. however, the other usb works with my iphone charger.
any suggestions? should i take it in? its a brand new laptop.

Reset the SMC and PRAM
SMC Reset:
Shut down the MacBook Pro.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM:
Shut down the MacBook Pro.
Locate the following keys on the keyboard: Command, Option, P, and R.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

External Monitor - Works with Mac Lion OS, but not with Boot Camp

Computer: Macbook Pro 13 inch purchased Spring 2011
OS: Mac - Lion (10.7.3), Boot Camp - Windows 7 (64 bit)
Utilizing an adaptor, I'm able to use my Samsung monitor without I problem when working in the Mac operating system. Unfortunatlely, when I switch to Windows 7 / Boot Camp partition, plugging in the Samsung makes both the external and laptop monitors go blank.
I have spent hours researching this, but I have be unable to come up with solution. It seems like the problem might have something to do with the NVIDIA drivers.
Does anyone know how I can go about fixing this problem? I appreciate your help.
Thanks,
PJL

I haven't experienced this in Bootcamp under Windows 7 using your same computer/OS's and I dual boot and use two monitors daily. So what you want IS possible.
When you boot into Windows the only Apple software you are using are Apple supplied drivers, some third party. Your video drivers are supplied by NVIDIA to Apple.
Try different adapters and cables. You don't say what you are using, DVI, VGA, but prove your cable set first. Then get your hardware specs and driver specs from Windows properties in Bootcamp and hit the Windows forums.

USB Charger Works With BF's iTouch But Not With Mine?!

Hello! My apologies for this being a bit long even though the problem is pretty straight-forward:
Both my boyfriend and myself have the iPod Touch 4 G. I bought mine a few months ago and bought his for a Valentine's Day present for him on Feb 14th of this year. So about a week and a half ago or so. So, the problem is with charging them. I have a Powerline dual usb wall/car charger that's been working fine for about three years. It will charge my tablet PC and it will also charge my boyfriend's iTouch. It will not, however, charge my iTouch. I can charge my iTouch through the computer or through our wifi router's usb port but as soon as I plug it into our wall charger: zip. If I plug it into the wall charger while the iTouch is turned completely off the iTouch will boot up instantly after being connected to the wall charger but it won't charge at all. Anyone have any suggestions?
Maybe I will just have to get a new wall charger for my iTouch. I really need one as I am going to be staying with my grandmother for the month of March and she has no computer or anything for me to charge my devices on other than the wall socket. It's just odd that my wall charger will charge my boyfriend's iTouch and mine will boot up when connected to it, but it won't charge it at all. Thank you for reading this and hopefully providing me with a workable solution. Oh, yeah, forgot to mention; I reset and restored my iTouch and tried it again. No luck. At least it's charging via other means; computer/wifi router, but I'd like to find out why the wall charger is only charging one of our iTouches.
I have tried resetting the device and I have also tried restoring it to factory settings and starting from scratch. I have tried other usb iPod usb cord/plugs, (we have three; one's mine, one's for my boyfriend's iTouch and one's left over from an upgraded iPod), and I have tried plugging the charger into different wall sockets. Like I said; it will charge the boyfriend's iPod fine and my iPod will boot up from complete shut down when plugged into the wall charger but it won't start charging.
Thanks!
~Ami E. Bowen

I am replying to my own question because this is how it was solved, for me at least. Since I was still within my 1-year warrenty I simply took my iPod Touch down to our local Apple Retail store and they traded me the faulty one for a brand new one. I went home, plugged it in to all the chargers one by one and every one works fine with the new one. So, if you have this problem, too, and are within your warrenty, I'd suggest going to your local Apple Retail Center and trading the old/faulty iPod for a new/better one.
~Ami E. Bowen

JSF webapp works with Java 1.4, but not Java EE 5

Hello
I am having a really weird problem with internationalizing my JavaServer Faces web application.
I am using Netbeans 6.0, Tomcat 6.0.10, JSF 1.2, and JTSL 1.1....
If I use Java 1.4 to run the webapp, everything works fine!
If I use Java EE 5 then it fails to execute internationalization of my choosen locale.
I could just use Java 1.4 and have my site working fine, but I would really like to use Java EE 5 since it can do more. Also I don't see why it can work on one version of Java but not another. My locales are English (en) and Korean (ko).
This is my index.jsp
<%--
    Document   : index
    Created on : 2/05/2008, 01:33:01
    Author     : Steve
--%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<%@taglib prefix="c" uri="http://java.sun.com/jstl/core"%>
<html>
    <f:view locale="#{localeBean.language}">
        <f:loadBundle basename="resources.messages" var="msg"/>
        <head>
            <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
            <title>JSP Page</title>
        </head>
        <body>
            <h2>Hello <h:outputText value="#{localeBean.country}"/>!</h2>
            <br>
            <h4><h:outputText value="#{msg.language}"/>:</h4>
            <h:form id="languageForm">
                <h:selectOneMenu   onchange="this.form.submit();" valueChangeListener="#{localeBean.dropdown1_processValueChange}">
                    <f:selectItem itemLabel="English" itemValue="en"/>
                    <f:selectItem itemLabel="��" itemValue="ko"/>
                </h:selectOneMenu>
            </h:form>
            <h:outputText value="#{localeBean.language}"/>
        </body>
    </f:view>
</html>This is my localeBean which is under the package "resources"
* To change this template, choose Tools | Templates
* and open the template in the editor.
package resources;
* @author Steve
import java.util.Locale;
import javax.faces.event.ValueChangeEvent;
public class localeBean {
    private String language = Locale.getDefault().getLanguage();
    private String country = Locale.getDefault().getCountry();
    public String getLanguage() {
        return language;
    public void setLanguage(String newValue) {
        language = newValue;
    public String getCountry() {
        return country;
    public void setCountry(String newValue) {
        country = newValue;
    public void dropdown1_processValueChange(ValueChangeEvent vce) {
        setLanguage((String) vce.getNewValue());
}This is my faces-config file
<?xml version='1.0' encoding='UTF-8'?>

<faces-config version="1.2"
    xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
<application>
        <locale-config>
            <default-locale>en</default-locale>
            <supported-locale>en</supported-locale>
            <supported-locale>ko</supported-locale>
        </locale-config>
        <message-bundle> resources.messages </message-bundle>
    </application>
    <managed-bean>
        <managed-bean-name>localeBean</managed-bean-name>
        <managed-bean-class>resources.localeBean</managed-bean-class>
        <managed-bean-scope>session</managed-bean-scope>
    </managed-bean>
</faces-config>and lastly I have my message bundle under the "resources" package which is named "messages".
This has a key word "language" which is "Language" in the 'en' locale file and "��" in the 'ko' locale file.
Once again when using Java 1.4 this project runs fine, however with Java EE 5 it does not.
You may notice in my index.jsp that I have <h:outputText value="#{localeBean.language}"/>
I use this to display the locale that has been chosen by my select box. Even when this shows a different language has been chosen the page does still not display in the correct language. According to <f:view locale="#{localeBean.language}"> then the locale of the page should be changed.
I have looked over the web quite far for an answer to this problem. But everyone else seems to be using a similar method of loading up a message bundle and using it the same way I am. However my method does not work.
Any suggestions or clues to what is going wrong would be really appreciated.
Thanks in advance^^

it seems that the
<f:view locale="en">
only work if a ressource bundle with the locale sufix '_en' is provided.
Everything works now if I provide 3 ressouce files:
global_en.properties
global_de.properties
global.properties
global.properties and global_en.properties are identically!
But if I delete the global_en.properties file always the global_de.properties file wins before the default properties.
I did not expect such a behavior :-(

Left most usb port works with usb 3 devices but not with usb 2 devices

Can someone enlighten me on this issue? I have a MBP mid 12 that seems to have issues with usb 2 devices such iPods, HHDs, etc. The same port works fine with usb 3 devices. I have tried several solutions but not avail such as resetting the SMC, PROM, disconnecting the battery and reinstalling OS X from scratch. Is there anything Im missing? I still don't believe is a hardware issue but something wrong in the firmware...

Can someone enlighten me on this issue? I have a MBP mid 12 that seems to have issues with usb 2 devices such iPods, HHDs, etc. The same port works fine with usb 3 devices. I have tried several solutions but not avail such as resetting the SMC, PROM, disconnecting the battery and reinstalling OS X from scratch. Is there anything Im missing? I still don't believe is a hardware issue but something wrong in the firmware...

Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp

Hi. I installed the patch 1.1 for Crysis Warhead which has the 64-bit version of the game which I'm running under Windows 7 64-bit on Boot Camp and I've tried the the compatibility mode (Vista to Vista SP2). I've also updated the ATI drivers as well as the Boot Camp drivers. I'm using the latest Snow Leopard.
When I click on the game's application (64-bit version), it would launch then it goes black with just the mouse cursor (you can move it about) which seems to be in low resolution and I guess it would crash so I would push the button on this late iMac 2009 and Windows would go back to the desktop then shutdown.
Has anyone made Crysis Warhead 64-bit work with Boot Camp Win7 64-bit with this iMac (it has the ATI 4850)? Is this because it's Boot Camp or that it's Windows 64-bit or is it the ATI graphics chip? Thank you in advance. Gbu.
Message was edited by: Alvin777

since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

S-Video adapter and analog TV works with OSX 10.5 but not Boot Camp 2.1(XP)

Similar Messages

Maybe you are looking for