S Video cable with scart.

Hi all
I m trying to connect my ipod to the tv with an s-video to scart cable, something comes through but its unwatchable and there s no audio.
Can anyone offer any advice, or if you ve tried it let me know...
thanks
gt

Regarding S-video, I do not think it can pass an audio signal--only video. Here in the States, S-video is used along with other cables for the audio portion. Commonly used cables are L and R RCA plugs or digital audio depending on what connectors are available on the TV or stereo system. Check this info: http://en.wikipedia.org/wiki/S-video

Similar Messages

Please confirm use of mini DVI-Video (s-video) cable with Macbook

Hi,
I have tried to use the Mini DVI-> Video cable with my new Macbook in order to be able to connect to my TV.
Unfortunately it doesnt work, I do get the resolution change when I plug in the cable but nothing on the TV. I went back to the local Apple center and they tested the cable on a Powerbook G4, it worked flawlessly. Then they tried a monitor on my Macbook's DVI port, it also worked.
But when trying the mini DVI to Video cable on the Macbook, no luck!
Can anybody please confirm they have used this cable and connected successfully to a TV?? Using either the s-video option or composite?
Thanks in advance!!!
Best Regards,
Thomas
G5 DP2.0, Macbook Mac OS X (10.4.6)

I can confirm that the s-video connection to a standard CRT TV using the mini-DVI video adapter does NOT work with my MacBook.
The display is detected, and when mirroring is enabled, the resolution on the MacBook display is adjusted, but the TV doesn't display the MacBook signal. Instead, I get a black screen or some random flickers of color. Following the instructions in the help files, I've adjusted the resolution down to its lowest level with no success.
My guess is that this is related to the fact that the integrated graphics relies on system RAM, and I am running my machine with the stock 512 Mb RAM it shipped with (2 GB are on their way).
On the off chance it would help, I even tried closing the display, in hopes that the memory savings from turning off the MacBook display would enable the TV signal, but no luck.
Thomas, how much RAM do you have in your MacBook?
Those of you who have been successful using external displays, are any of you using the stock 512 Mb RAM?
2.0 GHz Core Duo MacBook (Black), 512 Mb RAM Mac OS X (10.4.6) Dual 500 MHz G4 "Gigabit Ethernet"

Using iPad Composite Video Cable with Mini

I have an Apple composite video cable that worked beautifully with my 1st generation iPad. The 30 pin to lightning adapter will allow me to make the physical connections of that cable to my new Mini, but thus far I've been unable to get it to work. Is this a lost cause, or can it be made to work?

Thanks IIIass
In reply
- my iPod Touch is a 3rd gen so I referred to that guide, but have upgraded software on it to iOS5.1... so that may explain why the TV Out option has disappeared.
- I normally use the AV leads for my Wii into my TV, and so have taken those out and put the Apple leads in then gone to the "game" input screen option I normally use for the Wii. I then connect the iPod Touch to the composite lead, and then press play on the video. The screen is black with no sound !
- I have a portable TV I can test if it has the AV lead input sockets.

Conecting Mini DVI to HDMI Video Cable with my mac book pro

Hi. I just bought Mini DVI to HDMI Video Cable to connect my mac book pro to my HD TV. I connected the cables and put my TV on HDMI input. On the TV it appears the Snow Leopard Background but I can't see my desktop or the icons. What should I do to view my mac book pro on the Tv? Thanks!

Hi y3p3v3,
On the TV it appears the Snow Leopard Background but I can't see my desktop or the icons. What should I do to view my mac book pro on the Tv? Thanks!
You've got it connected, and you're viewing it already! Connect it up again, and try dragging a window either to the left, or right, off your built-in screen. You'll find that it appears on your TV!
What you're doing is running the computer in "extended desktop" mode. That means that your TV screen is available to put things on, but won't show your menu bar, dock, or icons. Those remain on the "primary screen" which remains your MBP's built-in display.
When the TV is plugged in, go to System Preferences --> Displays
The main System Preferences window will remain on your MBP's screen, but a second one should appear on the TV as well. If you go to the one on your MBP's screen, and click the "Arrangement" tab, you'll see two screens shown in the diagram. One will have a menubar. That's your MBPs screen. You can drag the menubar to the other screen to change the primary screen to the TV.
OR, you can just click "Mirror Displays" and your TV will show the exact same picture as your MBP display. This option is the simplest and will accomplish what you want, I think.
If you have any other questions, or if you need any clarification, feel free to ask!
--Travis

Setting up video camera with iDVD

I am very new to iDVD so please forgive me. I have read the manuals and what they don't tell you is how you go about linking up your video camera with your mac.
I have an old Mini DV JVC video camera (one of the first digital cameras available). Do I need to buy some sort of cable to link it to my iBook (as it only has audio and video cables and scart adpater). Also, do I need some extra software in order to import footage to my iBook from the mini DVs on my camera to allow me to use the files in iDVD?
Sorry if this is a stupid question but I no longer have my video camera handbook.

Sparkley,
Try going to JVC's website, and see if you can get a new manual.
Odds are you need a firewire cable, and many camcorders do not come with them. Most use a 4 pin to 6 pin firewire (also called 1394 or iLink) cable. Be sure NOT to get a USB cable, it won't work.
Check and see if there is a small port labeled "DV" on the JVC somewhere.
As long as your camera is "DV", you should need any other hardware (besides the cable) or software outside of iLife (iMovie/iDVD). I recommend that you use iMovie to start for importing - I'm not a fan of "OneStep" in iDVD.
Read this too:
http://docs.info.apple.com/article.html?artnum=165336
john

SCART to cpt video cable

Does anyone know if a SCART-to-component video cable (eg http://www.tvcables.co.uk/cgi-bin/tvcables/PGV375.html) will work with Apple TV?
Our Sony TV does not have cpt video - only SCART, S-video, and single-channel AV

Further to what Winnie has said, SCART can also carry RGB.
Given that you are using SCART, which tends to be european only, in the event of your TV NOT supporting component over SCART, I've put together a small web page on a few different converters.
http://www.woggledog.com/mac/yuv.asp
They're not cheap, so you might be better off doing the HDMI > DVI > Composite trick.... details here: http://www.woggledog.com/mac/comp.asp
Sorry for the blatant plugging of my website, but it does have most of the info you'll need if your TV DOESN'T support component

Qosmio G20 = Component Video Cable and High Definition Videos With Pinnacle

Dear Everybody
I bought my Qosmio G20-120 from Poland which came with D-video to Scart cable. This cable is only capable of transferring Video (CVBS) signals which is pretty useless because Qoismio has S-Video Output already... Which is better than simple Video Output that I can get from Scart.
According to www.toshiba-europe.com Qoismio has supposed to have Component Video output. But it comes with Scart cable instead. I am still trying to get this Component Video to D-Video cable from the distributor. If I wont succeed, does anybody know if and where I can buy this cable in Europe? Or is it possible to make a component video to D-video cable out of D-Video to Scart cable?
As last did anybody try the high definition DVB-S channels on Qoismio by using USB 2.0 DVB-S TV Card.Any opinions about Pinnacle PCTV 400e ??
Thank You

Yes I do live in Europe. But who says that Component Video Cable is a standart from USA or Japan. I have been using Component Video Cables to connect my DVD Player with my video projector since 2002. Component Video Cables are wisely used in Europe. And its the ONLY analogue way of transferring HD-Video (Plus DVI and HDMI)
What disturbs me alot is that on www.toshiba-europe.com they explain that my computer has:
Interfaces 1 x headphone
1 x DC-in
1 x line-in
1 x external monitor
1 x RJ-11
1 x RJ-45
1 x i.LINK (IEEE 1394)
4 x USB 2.0
1 x Monitor-in (line-in port)
1 x TV-antenna
1 x S-Video-in (Composite/Line-in)
1 x TV-out (s-video, Component-out))
1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card)
Where is the Component-out ???Promise is a promise. Why do they say it if they dont give it?
Instruction manual also says that : D-Video port lets you transfer 525i(480i),525p(480p),1125i(1080i) or 750p(720p) data to external devices.
How can you transfer 720p with a Scart Cable?? It is impossible.... The only way that Qosmio can transfer 1280x720 picture is a Component Video cable.(Because it has no DVI port) How much does this cable cost anyway?? But the problem is NOBODY is producing it in Europe. I am writing to Toshiba-Japan. Since they are saying that my computer has Component-out so they must get me the cable....

How do I connect an iPhone 5S or 6 with audio video cables?

How do I connect an iPhone 5S or 6 with audio video cables? Our van only has these connections. Apple did have a cable that worked with the 4/4S, but it does not work with an adapter on the 5S. I want audio only.

I Thought I probably was.
something like this should work then, right?
Belkin Y Audio Cable (12 foot) https://www.amazon.com/dp/B000067RBT/ref=cm_sw_r_awd_fYWzub11XY5MQ
OR
eForCity 3.5mm to RCA Auxiliary Cable Cord for iPod/MP3 https://www.amazon.com/dp/B0042DIZTE/ref=cm_sw_r_awd_R0Wzub1X33PD9
thx SO much )

How to connect video-in cable with Qosmio G50?

Hi
I bought the Qosmio G50-11S, and received a video in cable with it. (Red/White/Yellow RCA jack to mini jack) But I cannot find any way of connecting it to my notebook, not the manual nor any online resources talks about it. The issue is I need to capture video from my video recorder to my notebook and the normal TV antenna comes with a lot of noise, so I which to utilize the video in cable. Any ideas?
Thanks
M

Hello
In the past Ive made some experiments with it. I wanted to create DVDs copying the material from old VHS recorder. Do you want to use the same recorder? Ive done this on Qosmio G30 but the principle is the same.
The fact is that you must send the signal to the notebook and for this you must use video-in port.
I don't see your Qosmio has several of them so I think only way to send signal into your notebook is to use antenna-in port. Which video-out port you want to use on your recorder?

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
Good luck Derek

There's video problems with my Zen Vision:M already (M video cable related) Please help

Some background...
System:Windows XP with Service Pack 2.
Player: Brand new Creative Zen Vision: M with no firmware updates.
My Zen Vision:M has a problem (besides the scratch and fingerprint attracting top surface): It won't play videos on a TV screen when the M Video Cable (also from Creative) is linked to it anymore. It's only been a few hours...
I had the cable already, and got the player today. I let the player charge to /4th of a battery while I was setting up all the software. I ran the software programs just to take a peek, only changing the name of my player (to my name). I used Winamp 5.3 to put a music track on the player to test it. After that, I hooked it up to the VCR in my room through the white and yellow A/V plugs in front. It worked just fine. It to the tv a little large, but I was okay with it.
Later on today, the new AC charger I ordered came in the mail (Player came through UPS, charger through USPS). I looked at my old charger (Creative Zen Touch) and realized it would work with the plug-in part of the sync unit at the bottom. I tested it for a minute and it did. I still took it out and tried the new one. This is where, I think, something happened. I had to press the sides to get the thing in, and it was hard to come out. Everything still fit just right, and nothing seemed to be wrong. I used my old charger as I added more of my music library. Now it was on to videos. I had to convert the first two test vids (they were .wmv), but they played on my player fine. I put a bigger .wmv file onto the player to see if it had to convert it, and it did. It still played on the player. When I go to hook it to the TV with the A/V cord again, there was nothing but a black screen with the occasional diagonal scan line. The sound is still there.
Besides quirks with the navigational system, the player is still great for music and video. Still, I needed no video capability, and one of the things that made the ZVM a buy for me was watching my vids on the big screen. I'd return this for a second try, but I want to know if this is a recurring issue with you guys and if there's something I can do to fix it before a return. Did I mess with a setting? Should I get new firmware? Did I do wrong using my old charger? If any of you have an answer, or need more info on my situation, please let me know.
And BTW, does anyone know of some better software for organizing files on the ZVM? I used Winamp for my Zen Touch and the music on my ZVM, but videos are another ballpark. I can't transfer a video from one folder to another folder (assuming both folders are on the ZVM). Not to mention the music I transferred using Winamp isn't even showing up in Windows Media Player. I think I need a different program altogether.

I have got a new Creative Zen Vision W and getting the same problem....when i attach to the tv then i am able to hear the audio content and the video does not show.Are we missing something ? or is it a problem with the player. Also the software provided with the Zen converts small .vob files to .wmv when ever the size is large it gives an error 'conversion?unsucessful'.Any body facing similar problems please help.

How can i use apple tv and iTunes movies with component video cables for an older receiver and projector?

i have an older yamaha receiver and projector both without hdmi inputs but component video instead. I would like to get apple tv and start renting movies through iTunes but apple tv only supports hdmi and ive read that iTunes has codes to prevent the use ot analog cables with movies. Is there a way to adapt hdmi to component video for both apple tv and iTunes easily?

Yes, HDMI is the only supported method. Also, with converters you will run into issues with HDCP (which will prevent you from streaming DRM content from iTunes etc) as well as resolution.

How to put audio with s-video cable

heyas. i am using a svide cable and i have no sound. then i put another cable in the s-line out (the one i use with my amplifier and it is ok)and cnnectect to the tv but no sound! i have all the updates. tahnks

pbc pt
You need to use audio cables left and right from the dock or headphone jack to audio input on tv, as s-video cable does not carry audio signal. If you are using the Apple A/V kit or cable hook up is simple red to red... white to white yellow to nothing as you are using S-video but if a non-apple A/V cable the plugs may have to be swithced to yellow to red....white to white and red to yellow (or in your case red to nothing as you are using "s" video.
Rick

Old Composite Video cable (Tangerine iBook) not compatible with Video iPod

I discovered a little surprise.
Despite being exactly identical on both ends of the cable, an old Apple Composite Video cable, originally purchased for a Tangerine iBook, is not compatible with Video iPod.
Anybody confirms such situation, or is it just my Video iPod with a faulty video output?
Ciao
30G Video iPod Fifth Generation Mac OS X (10.3.9)

Gerardo
The cable may look the same but it's wired differently. Please see this for more info :
http://www.tuaw.com/2005/11/01/how-to-convert-an-ibook-av-cable-to-an-ipod-av-ca ble/
regards
Brian

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras

Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

S Video cable with scart.

Similar Messages

Maybe you are looking for