S video in, no colour picture on Qosmio G10

Only getting a B&W picture on G10 when connected from STB to monitor in port with switched scart to S video lead .
Have set monitor in to sVideo in Tosh picture enhancement utilities & TV to PAL (as in UK).
In G Force Device settings advanced TV type is set to PAL - B.
Getting all channels v clearly but only in B&W.
In Qosmio player mode ( ie without XP & MCE) the picture is in perfect colour so it must be a XP/MCE problem. Any ideas?

Have finally found the solution which I pass on in the hope that it might help others.
The Qosmio was set up correctly.
I dont know why colour was received in player mode but to get colour in MCE the digital STB had to have the TV out configured to Y/C. This is apparently the same as S video. Voila.
[Edited by: admin on 17-Mar-05 19:06]

Similar Messages

  • Black and White Tv Pictures with Qosmio G10-106

    Grey hairs and going bald from pulling hair out. Bought Toshiba G10-106 in Jan 05,living in Ireland using ordinary Tv cable for laptop and cannot get Tv to work properly.B&w images are the best ive got so far.
    Is there compatability issues with Toshiba driver and Windows MCE?Also if i launch Tv without booting windows i get one channel(E4) in colour but totally fuzzy. Would love to have this cracked as spent lot of dosh on the laptop and am relatively new to computers and would like some feel good factor rather than depression.
    Thanks all.

    Sorry,i should have clarified. My hopes were to watch TV on the laptop itself using the built in TV tuner and the Antenna adapter supplied with the Qosmio,using no other equipment.
    I have launch media centre/settings/current region=Ireland/cable or digital selected/analogue terrestrial pal/secam selected/No selected to "Do i have a set top box?",then i return to Tv settings as there is no Guide listings for Ireland.
    I then scan for services. Thirty seven services found all in Black and White and some quite fuzzy. Hope this will narrow things down,i cant figure it.
    Thanks for help.

  • I deleted over 200 self taken videos and over 500 pictures in the Moments window in my photo tab.  They deleted but still show in my setting in the About window and I haven't gained any additional storage capacity.  What do I do now?

    I deleted over 200 self taken videos and over 500 pictures in the Moments window in my photo tab.  They deleted but still show in my setting in the Setting/About window and I haven't gained any additional storage capacity.  What do I do now? Please help!  Thanks in advance for any assistance!!!

    Check the Recently Deleted album. Deleted photos will reside there for up to 30 days. This allows all those people who accidently delete photos to recover them, something they couldn't do before. To actually free up the space you might have to delete the photos in the Recently Deleted album.

  • My video will not show picture only sound? windows 8.1

    I did updates yesterday and now this is happening

    Hello @34jamie,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your video will not show picture, but the audio will work on your Windows 8.1 computer. Does the video appear and then disappear using media player software? Does this occur when streaming videos on YouTube? Did you perform Windows or HP updates before this issue occured? Does the entire screen go blank, turn a different color or just show blank on the video window you are attempting to view? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. 
    How Do I Find My Model Number or Product Number?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • The camera icon is missing when i take a video,i cant take pictures on my iphone 4s and itouch 5th gen.it started when i updated it to ios 6.0.1

    The camera icon is missing when i take a video,i cant take pictures on my iphone 4s and itouch 5th gen.it started when i updated it to ios 6.0.1

    Sorry I'm so late responding; I've been away.
    http://support.apple.com/kb/TS3694#error1611
    The error means that your antivirus or firewall is blocking the update process.

  • How to display 3D still pictures on Qosmio F750-122?

    How can I dispayes still pictures on Qosmio 750-122 (glasesless ) ?
    Pictures from Panasonic Lumix 3G camera.

    Hi,
    I've got an LG P720 Optimus 3D Max mobile phone which has twin cameras for taking stereoscopic photos.
    On my Qosmio F750 11U (glasses free) I click a .jps file and the special "NVIDIA 3D Vision Photo Viewer 1.2.1" shows the .jps file as 2 photos side-by-side. I can then right-click that window and choose "Stereo view (fullscreen)". So it can be done! :-) At least on my 11U.
    I had to install newer drivers than those which came installed, and in "NVIDIA Control Panel" under "Stereoscopic 3D, Set up stereoscopic 3D", I have "Enabled stereoscopic 3D". That window irritates me because after setting a tick in the "Enable stereoscopic 3D" box, I have to click "Apply" (bottom right) before I can click the "Test stereoscopic 3D..."
    I hope this helps...

  • Qosmio G10: analog video signal capturing from Camcorder

    Please help
    I am from Canada and new to this forum. I bought a Qosmio G10 early this year but only had a chance to try to use it to capture and convert my V8 home video tapes recently with no success.
    I have tried the Toshiba Tech support with no hope. I have tried the registery patch for VinDVD creator 2, but still it is not seeing my video input stream from the camcorder. I tried both S-Video and Composite inputs with no result. Anybody with similar experience?
    I appreciate your help.
    Moe

    Help please?
    It's me again!
    So far I've got the analog video stream captured only when using DVD Creator 2. But, I still have two more problems to solve. 1) When I stop recording onto DVD creator, always error message:"WinDVD Creator has encountered a problem and needs to close. We are sorry for the inconvenience." is displayed, and restarting the program it cannot open the recorded clip saying "either the file is corrupt or a non-compatible file format" while Windows Media player can play it back. I cannot edit the recorded video clip as a result. 2) The second problem is that the video stream from S-Video of analog camcorder is played back OK, but once click the record on DVD creator, the video capturing starts to lag and looses smooth flow.
    Any hint or comment is appreciated.
    Thanks,
    Moe

  • Display Properties (Qosmio G10)

    Hi,
    Basically, I tried to show my parents on their TV photos from uni(Qosmio G10 - WIn MCE 2005). And it worked! Then, because I thought the resolution was too fine, I decided to tinker about with the settings in Display Properties as well as the GeForce FX Go5700 utility to change it and got carried away changing settings. After I pressed some button or another, the image on the TV vanished. I can't seem to get it back.
    Anyway to reset or default Display Properties and/ or the GeForce utility - at least this will aloow me to continue to use my laptop for other presentation needs esp. at uni.
    Thanks a lot,
    WB

    Yes, while the Qomsio is running, press Fn + F5 until you get a picture back on its internal screen.
    Later,
    Alcahest

  • Qosmio G10 Graphics and Sound driver installation

    Hi
    I have recently tried to reinstall my Toshiba Qosmio G10 after downloading all the latest drivers of the Toshiba site.
    Unfortunately I have had my motherboard and display replaced over the last 3 years (under Warranty) , which means all the hardware has changed from the original laptop I bought (now has Graphics card ,NVIDIA GeForce go 6600, new chipset, etc, as far as i remember).
    Does anyone have a system recovery cd or a place I can download the correct drivers for this laptop.
    I am a sys admin, and technical and have spent about 5 hours pulling out my hair trying to get the video and sound drivers working.

    Hi!
    It is pretty easy to get drivers for a Toshiba notebook.
    Did you search on Toshiba website?
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Search for Qosmio G10 and then you will find it.
    Bye

  • Qosmio G10-133 - need Keyboard Part No

    I have a Qosmio G10-133 for about 5 months, but alas a small picture fell and damaged the keyboard. It broke one key luckily, and one that isn't used much!!! The |\ key. But it is still a pain. I could claim on my household insurance, but I wont.
    I am trying to find the correct part number. How easy is it to install a replacement? I recently changed a hard drive for a friend in other notebook, and keyboard removal replacement seemed very easy. What is it like on the Tosh?
    [Edited by: admin on 09-Oct-05 13:36]

    I just couldn't be sure as one website like www.laptopbits.co.uk says:
    Toshiba Replacement Keyboard UK Specification
    New Toshiba original spare part for the following range of laptops - UK keys part number P000349000, P000405490 or P000367420
    Suitable for the following Toshiba Laptops
    Qosmio E10, Qosmio F10, Qosmio G10
    Satellite 1410 series & 2410 series
    Satellite A40 and M30
    Price each 55 + VAT
    Usually ships: same day for next day delivery
    P000367420
    Price each
    64.63
    Qty required
    So I wasn't sure, as I can get the part no P000367420 fairly a reasonable amount secondhand. But I am uncertain what the difference is between this one and the one you quote? Any ideas? Will this part no work on a g10?
    Kind regards to all who are helping.

  • Qosmio G10: News Flash - Great News for Capturing!!

    I own a Qosmio G10. I live in Australia and purchased the notebook here. I like to keep things upto date and was scanning the Australian Toshiba website when I came across a special up-date for Qosmio owners Here's the link
    http://www.isd.toshiba.com.au/cgi-bin/ai1.exe/topic/content/driver_search_list.jsp?BV_SessionID=@@@@1490231535 .1109544574@@@@&BV_EngineID=eaddckkmlflebfdhcjkcfg ldkf.0&theAction=true&CATOID=-15058&MODE=NPRO&ProductMenu_0=Notebooks&ProductMen u_1=Qosmio&ProductMenu_2=897343&x=21&y=4
    I am yet to try it but have installed it and using WinDVD creator I can choose to capture from S-video, Composite video or TV tuner. This may be just what we've all been waiting for. You can change the quality settings as well. I've looked on the international Toshiba website and can't find it. Anyway I hope it works for you all. There are some release notes for the utility on the page as well. Good luck!

    hello msnealo,
    i come from germany and was very sick about this situation with the tv line qosmio too.
    i got your advice and load the driver from this link.
    great, it works! this is the solution for all owner of qosmnio computer!
    thank you very much for your helps! (No one of Toshiba in the Supportcenter could help me bevore, ... thats service an competence!)
    Bey!
    Jan

  • Qosmio G10-105: screen is black

    I have been asked to look at a Qosmio G10-105 by a friend who claims it was working fine until one day "The screen went black"
    It appears to start fine but there is absolutely no image on the screen at all, no backlight and no "Dim" image. The problem is that when I connect an external screen there is also no image at all however the external screen does become backlit but that is all.
    Can I assume that it is neither the inverter, backlight or screen as I am getting no picture on an external screen?
    Is it likely to be the graphics card? If so is it replaceable or is it part of the motherboard?
    I have tried 2 external screens
    Any help / ideas would be most welcome...
    Thanks
    Rob

    > Is it likely to be the graphics card? If so is it replaceable or is it part of the motherboard?
    Hmm. It seems really like a graphic card issue
    It was a great idea to connect the external monitor to check if the same issue would appear on the second display this is a easiest way to find out if this issue could be related to the TFT display or the graphic card.
    The GPU chip is fixed on the motherboard and in most cases (in your case too) the whole motherboard must be replaced :(
    Unfortunately but it looks like a costly affair :(

  • Qosmio G10 graphics fault

    Hi guys,
    I have one problem with my Qosmio G10 with graphics. Image on the screen is completely incorrect. Pictures on the screen are divided to different squares that displayed in different points of screen. This bug starts just after power on the laptop.
    For example the logotype QOSMIO is showed in different points of screen in next view:
    In left side of screen are part of M, I and part of O, then OS and another part of M, then in right side of screen are Q that is cut to two parts and left part of O.
    All things are displayed in the same way.
    Pleas help me with it, if it is possible?
    Thank in advance
    IVAN

    Hi
    Its very sad to say it but it sounds like a graphic card problem!
    In such case you have to contact the ASP in your country for a help. I presume the motherboard must be replaced because the GPU chip is fixed on the board and cannot be removed as single part .
    Hopefully youve bought an additional extended warranty because the motherboard replacement could be a little bit expensive :(
    Contact the technicians and ask for more details!
    Good luck

  • White Screen on Qosmio G10 when starting

    I have an old Qosmio G10 which I bought from a licensed dealer in Beijing about 2 years ago.
    After about a year of use at home I discovered that the screen would sometimes turn white when the screen was moved or shaking.
    Some days it would work perfectly fine others it wouldnt even start up without going white.
    Towards the end the screen would only show a picture when the screen was put in a certain angle.
    Now, the screen just goes white the second I turn it on.
    Am I looking at a hardware problem here or have there been known to be software problems with some of the similar laptops?
    Thanks,
    T

    Hi buddy,
    sounds like the display cable is maybe loose. I would point on a hardware problem, but before sending your machine to an authorized service partner, go to an local computer technician and let him check the cables on the display.
    If realigning of the cables does not help then your display is defective and needs to be replaced by an authorized service partner. I dont know how long your warranty is, but if you want anyways send your machine to an service partner, you should visit the following link to find the nearest one in your country:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  • Qosmio G10-106: No warranty but motherboard was replaced free of charge

    Hey there.
    I have my toshiba QOSMIO G10 since 2005 and this year my graphic just went bad for any reason, my bad was I had my warranty already expired, so I called Toshiba to inform myself about the price of the mainboard as the graphic card is integrated with it.
    It was absurd with VAT will cost me £630.00, I fell frustrated and I resolved to call Toshiba to make a complaining as a did. They returned my call telling me
    They will change my mainboard FREE OF CHARGE and they did it in "48 hours" unbeliveble.
    It was amazing and grateful. So if someone is having the same problem as i had just call them.
    PS. this is my second Toshiba computer i can tell you after that i will love toshiba forever and i fell so happy and proud to have had purchased my computer from a respectable company as Toshiba.

    I saw you have already posted you issue here in this thread:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21291
    Hey Marcelo thanks for sharing this info with us! I think the Toshiba support is really NOT bad and you message confirms this fact!
    Thanks for feedback

Maybe you are looking for

  • How to install "Rescue and recovery" on a new harddisk (T60)

    My T60 has a 60gb harddisk and I want to upgrade to a 160gb. I need to know how to install this rescue and recovery on the new disk. Can some one help me out here I can imagine for example to create this (hidden) partition with Partition Magic,  but

  • Automatic payment block for purchase orders with no GR

    Hi all, we have this issue. We would have an automatic payment block for all the PO's that have the 2-way match (no GR set) All these PO's in our company have an account assignement (that could be a cost center or a WBS element). The important is tha

  • Outlook wont open

    Anybody help me on this. I cant seem to open outlook. It sits at the bottom of my screen looking as if its trying. I have tried everything including rebooting with disabled drivers and creating new profiles. The strange thing is I can create a new me

  • 2.0 issues, next version?

    On purpose, until now I have NO apps loaded or running, it's a plain vanilla default original 8GB iPhone. After upgrading my iPhone to 2.0, I found the following main issues; 1) iPhone 1.1 Battery life is much shorter, perhaps 2 days at the most inst

  • What happened to front row

    Updated to the latest OS (10.7) and found nothing special.  Unlike Leopard Lion is turning to be a let down.  All flash but no substance.  Of course it's faster, I would be faster to if most of insides were removed.