S-video not detected on X700-M with free driver??

Hi,
I'm using last ati-radeon free drivers on a ATI X700 mobility and my S-Video output is not detected by xrandr.
flo ~ $ sudo pacman -Q | grep video-ati
xf86-video-ati 6.12.2-1
flo ~ $ sudo pacman -Q | grep xorg-server
xorg-server 1.6.0-3
xorg-server-utils 7.4-4
I only get my VGA output (see? no S-Video) :
flo ~ $ xrandr
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 1280 x 1200
VGA-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 60.0*+
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
640x480 59.4
flo ~ $ lspci -vvnn
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X700 (PCIE) [1002:5653] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:11b2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Did I miss something in xorg config or in modules config or anywhat??
Thanks for help!
My xorg.conf is here.
My Xorg.0.log is here.

I'm having the same problem as you. I posted another thread before finding this one. I can't seem to get any replies either.
I don't know if we're the only ones having this issue or if no one else is trying to use S-video or what. I really wish I could get mine fixed. I tried the xf86-video-ati-git from AUR but it didn't help.
The only difference with my problem is that xrandr also shows a DVI-0 at the bottom. I don't even have a DVI-0. I have a VGA-0 like you do. I wonder if xrandr is detecting the S-video as DVI for some reason? Though I've tried setting up DVI-0 as I would S-video but that doesn't work.
Have you solved this by any chance? If so I'd be interested to know how. Thanks and good luck.
***My card is an ATI X1200 series by the way.
Last edited by The Avatar of Time (2009-06-30 05:50:53)

Similar Messages

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

T410 running Windows 7 not detecting HP LP3065 connected with DisplayPort to DVI Dual-Link

I am running Windows 7 on a Thinkpad T410. I have an HP LP3065 monitor connected to it using an Accell DisplayPort to DVI Dual-Link adapter. Windows 7 does not detect the monitor. The NVIDIA drivers are up to date and I have tried powering the Accell adaptor with multiple USB ports. I do not know if there is a problem with the adaptor or if Windows 7 is just unable to see the monitor with this combination.
Could someone please let me know how I can diagnose this? Thank you in advance.

Similar issue: my T410 does not detect LG W2343T-PF (1920x1080) connected with DisplayPort to DVI Dual-Link Cable
T410 with integrated graphics
Type: 2516
BIOS: 1.09 (2010-01-07)
Embedded Controller: 1.03
Windows7 Pro x64
drivers are up-to-date with Lenovo
the same DP to DVI Dual-link cable was able to connect to Dell 1280x1024 monitor in my office.
Maybe I should used single link DVI cable.
I will do more testing this evening
(1) to test the connection on difference 1280x1024 monitor this evening at my home
(2) try different cable - something link DP to DVI Single-link cable
Meanwhile, just want to check others experient working with DisplayPort on T410/T510 as I really need to use dual external mornitor with my T410.

CD-ROM and S-video not detected

My laptop (a Toshiba Satellite P205 - about 3 years old) started having problems. If I activated, for example, my email program, it would start but for 5 minutes or longer it would be unresponsive. The title bar said "not responding" and nothing would happen for 5 minutes. If I did nothing it would finally start working. So, yesterday, I got out the reinstallation disks and reinstalled Windows Vista (32 bit). This reformatted the hard drive but I had backed up my important files. Anyway, it ran much better and I was able to use the CD-ROM to reinstall some programs and document files I lost when I reformatted. BUT later, when I turned the machine on again, the computer didn't recognize that it has a DVD/CD-ROM drive or an S-video. I checked it by going to "Computer" where I used to be able to see all the files by drives. It detected my second hard drive (connected by USB) and the Flashdrive but not the DVD/CD-ROM drive or the S-video connection. It also detects my USB devices (printer, mouse, etc) .
This morning, I went through "Device Manager" and checked the driver for the DVD drive. I got this message under "General":
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
What is Code 39?
I would reformat again but, obviously, if I don't have access to the DVD/CD-ROM, I can't.
If anyone can help me, please email me at [email protected]
Thank you all very much.

I'm having the same problem as you. I posted another thread before finding this one. I can't seem to get any replies either.
I don't know if we're the only ones having this issue or if no one else is trying to use S-video or what. I really wish I could get mine fixed. I tried the xf86-video-ati-git from AUR but it didn't help.
The only difference with my problem is that xrandr also shows a DVI-0 at the bottom. I don't even have a DVI-0. I have a VGA-0 like you do. I wonder if xrandr is detecting the S-video as DVI for some reason? Though I've tried setting up DVI-0 as I would S-video but that doesn't work.
Have you solved this by any chance? If so I'd be interested to know how. Thanks and good luck.
***My card is an ATI X1200 series by the way.
Last edited by The Avatar of Time (2009-06-30 05:50:53)

Audio and video not synchronized in recording made with Lync 2013

There appears to be no forum for the Lync 2013 client yet, so I am posting this in the Lync 2013 server forum.
Environment: Lync 2013 Server and Lync 2013 32-bit client. Only one Lync pool. Conference call was scheduled using "Lync Meeting" in Outlook about a week before the call. Call recorded on a laptop that was plugged into our LAN with an Ethernet
cable.
Problem: User scheduled a conference call with screen sharing (PowerPoint) and recorded the call. The audio and video are not synchronized in the recording. There is several minutes' delay, with the audio lagging behind the PowerPoint. The last slide
on the call was presented, the call ended, and the presenter ended the recording (I was present for all this and can confirm no user error in these steps); however, in the recording, the slides change before the speaker talks about it, and the last
couple of minutes are cut off.
Any ideas on why this happened? Web research has failed me. Thank you.

You may need to lower the recording quality as your PC might not be able to keep up the pace.
Go to Options in Lync client -> Recording -> Select 480p
Then test again
- Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

Audio/video not syncing on a PC with i-tunes movies.

Recently started having a problem with the audio and video of my itunes movies on my PC. Had no problem for the longest time, years. I get up to 3 seconds gap, video ahead of audio on every movie I play. If I pause for a few seconds, the audio/video sync but shortly after, start to separate again. I reinstalled i-tunes, reinstalled my movies one at a time from the cloud. If helpful, for some unknown reason, all my movies recently were deleted from the hard drive memory but were still available from the cloud. Don't seem to have the issue when playing movies on my i-touch. Audio on the computer while playing a movie seems to have pops or quick gaps when the a/v is drifting apart. These are memory resident movies not played from cloud storage.

Hey Pedsrndad,
Thanks for using Apple Support Communities.
Looks like your sound and video are out of sync. This article explains how to troubleshoot that issue.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Have a nice day,
Mario

Nokia e5 not detecting on windows 8 with usb cable

Hi,
My nokia e5 phone cannot getting detected on windows 8 in usb mode with usb cable.
I have got all the required drivers installed and usb ports are working fine with other usb drives.
Could you please help me on this.
Thanks and regards,
Solved!
Go to Solution.

hominusnocturna wrote:
Yes, I have installed the latest Nokia suite version 3.8.30.
Also the phone is not even charging while i am connecting via usb.
Slightly worrying that no USB functionality at all with device which might be indicative of possible hardware problem.
Have just established Bluetooth connection between E72 a similar S60 3rd Ed FP2 device as your E5-00, You are going to Menu > Ctrl. panel > Connectivity > Bluetooth - tap two bluetooth icon tab (next to spanner one) at top of screen > Options - start it searching for new device at the same time? Would have to say that it seems to take Windows 8 a long time to set it up:
Happy to have helped forum in a small way with a Support Ratio = 37.0

Why are You tube videos not working on macbook pro with retina?

Every time I want to open a You Tube video You Tube says that its not possible for the moment.
But the video worked on my iMac.

Make sure you have downloaded Flash.
DC

Videos not detected on Safari

Hi there,
I've embedded a video (mp4) on to my website but it won't work in Safari on Windows. I have installed flash, quicktime and VLC.
It works in IE, Firefox and Chrome, and even YouTube videos work on Safari, but for some reason it won't detect it all - it just doesn't appear. Any suggestions?
Thanks,
Guy

http://commerce-connections.com/sites/default/files/create-an-order.mp4
Your video works in my version (7) of Safari on my Mac running 10.9.
It could load faster if you reduced the audio track (it's bigger than the video side) by exporting in mono and reducing the sample rate.

Flv videos not playing on html files - UNC/Mapped Drives

Hi,
We've discovered an issue with Dreamweaver CS3 recently (running on Windows 7 Pro, 32bit) in our school, where embedded flv video files wont run when the file's UNC path appears in the address bar, but will if this is changed to the local drive letter, in our case N. This obviously makes it a little difficult for teachers to mark students' work.
I found a similar issue in another thread:
http://forums.adobe.com/thread/688483
which had not been answered. Are there any known solutions for this please? I have spent a while browsing, but have so far not come back with much. I've tried enabling and disabling 'Remove run from start menu' which was suggested, but this didn't make any difference.
Thank you
Regards
Savos Aren

Nathan,
Your welcome, if that is the case, then can you try and insert the MultiSlide Video, you can insert the streaming video URL.
You can add the server to you computer as network Drive and then browser to that location, once you do that, the options to add the Video as Streaming can be chose and your Vidoe would remain insync with main playbar, users can play and pause content that way.
See if this can be implemented at your end.
Thanks,
Anjaneai

Photoshop CC not detect nVidia GeForce GTX 680 after driver upgrade (Windows 8 64-bit)

i just upgraded the driver for my nVidia GeForce 680 graphics card from the nVidia website. the specifications are shown below. Photoshop CC now says that it can't detect my graphics card. does anyone know the solution to this problem?
nVidia verstion 327.23 WHQL
release date: Sept 9, 2013
operating system: windows 8 64-bit
will adobe have to issue an update to photoshop CC to fix the problem?

hey chris,
thx for relplying. i appreciat it. here is what happened. i did an update through microsoft and downloaded a driver for nVidia. somehow that download caused PS CC to stop recognizing my GTX 680. i'm not sure why. subsequent to that, i went to nVidia's website and downloaded the current driver. i still found that PS CC didn't "see" my graphics card. that is when i wrote this post. after i posted this i rebooted my computer and found that everything now works fine. PS CC now recognizes my GeForce GTX 680 with no problems.
john

Not able to connect/login with Oracle Drive

Conecting via MS FileExplorer works fine (same user, same settings). Has anyone had this problem?

I finally noticed the pattern. I could not connect non-SSL either and thought it was just me not being able to figure out the correct file path, even though I was using the same path as I used to get to WebDAV with the browser. What I noticed was that when I went to WebDAV with a browser and had to sign into SSO (browser was not already signed-in) it would never re-direct to the folders, I would have to close the browser and open another before seeing the folders. Once logged-in through the browser I could connect using same url/filepath as the browser using ODrive. ODrive will not let me connect unless I have already logged in with the browser. Kinda strange. Still no SSL though. A previous post mentions SSL is not supported, which is wierd considering there is a "Use Secure Connection" check box in the connection configuration........

IWork not working on iPhone 5 with iCloud Drive

I upgraded to iOS 8 on my iPhone 5 and activated iCloud Drive, since then iWork applications won't let me create a document or see my documents that were previously created. Though, I did the same thing on my iPad 4 gen and everything works well.
-I tried reinstalling each applications a number of times.
-I reinstalled iOS 8 via my Mac.
Thanks in advance!

Here are the steps I have taken so far, none of them working:
1.) I have done a full reset and set the phone up as a new phone (no restore from icloud)
2.) I have downloaded the public release build from the developer forum, installed it, and set up as a new phone.
3.) I have done 1 and 2 above while restoring from icloud
Not one of them has worked. I am wondering if it isolated to the Verizon iphone 5?

Nano not adding new songs even with free space

I have my nano automatically updating only a few of my playlist on itunes. Today however, I encountered a problem, for some reason even though itunes shows that I have 743 MB free, I am unable to update my nano, even when just adding one song to the playlist. I am able to manual update though, anyone have a solution, I would love to be able to still use the itunes playlist.

same problems over here.... 4gb model, but won't add songs even though i have ~1.81gb free. what the heck?

Ipod touch 5th gen not detected in mac os 10.8.2

Hi
My ipod touch 5 gen with ios 6.0.2 is not detected in mac mini with 10.8.2. It is working with all other PCs and mac except my mac. I tried all the posible trobleshootings found in the internet, still it is not working.

Hi Bruce, and a warm welcome to the forums!
I can't find the PCI card, just the PCIe card...
http://www.sonnettech.com/support/kb/kb.php?cat=164&expand=a3_a2b405&action=b490#b490
http://www.amazon.com/Presto-Gigabit-Ethernet-PCIe-Card/dp/B0017K6BR8
But on a hunch, System Preferences>Network, unlock the Lock if need be, see if you get New Port Detected, or click the little + icon and see if you can add Ethernet.
If it works & that is the Interface used for Internet, click on the little Gear icon>Set Service Order, drag Ethernet to the top.

S-video not detected on X700-M with free driver??

Similar Messages

Maybe you are looking for