S-video output does not work with iOS5.1.1 via ipod dock

After upgradig my Touch to iOS5.1.1 I cannot see video etc. on my TV via my Ipod Dock.
It was working fine before the upgrade.
The ipod is telling me, that it's connected to the TV, but nothings appears on my TV.
It was working fine before the upgrade.
I have tried to contact Apple Support but I have not succeded finding out how to contact them about the bug.
Anyone else experience same problem?
Regards
obertel

I have the same issue with my iHome iW1 AirPlay. After updating both my iPhone 3gs and ipad 3, it cannot use my iW1 with airplay. Also when I plug one of my iOs device to the iW1 I get the infamous "Charging is not supported with this accesory"....
Anyone got a workaround?

Similar Messages

  • Tecra M4: TV s-video out does not work with Vista

    I have windows vista ultimate on Tecra m4.
    I tried to get tv out through s-video but nothing happened.
    I tried fn+f5 but it shows only Lcd choice with no other choices.
    While it works good with windows xp tablet edition I installed the newest driver offered by toshiba but nothing happened.
    The same problem is still here; no tv out.
    Can any one help me

    Hi
    As far as I know the Vista drivers are not available for the Tecra M4 at this time.
    I have checked the Vista driver download site and the M4 is not listed.
    I think you have to wait for compatible drivers
    If you install the graphic driver, you should check the Nvidia display settings. There you could choose between the TV, analogue display and digital flat display.
    There choose TV and configure it via device settings

  • Installed Premiere Pro CS4 but video display does not work?

    I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
    1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
    2) the UI is way too slow for my big beefy system.
    My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
    Any ideas how to solve this CS4 install issue?
    Ron

    I would like to thank Dan, Hunt, and Haram:
    The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
    My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
    My PC is brand new with the following "beefy" components:
    Motherboard
    nForce 790i SLI FTW
    Features:
    3x PCI Express x16 graphics support
    PCI Express 2.0
    NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
    DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
    Overclocking tools
    NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
    ESA Certified
    NVIDIA DualNet and FirstPacket Ethernet technology
    Registered
    CPU: Intel Core 2 Quad Q9550
    S-Spec: SLAWQ
    Ver: E36105-001
    Product Code: BX80569Q9550
    Made in Malaysia
    Pack Date: 09/04/08
    Features:
    Freq.: 2.83 GHz
    L2 Cache: 12 MHz Cache
    FSB: 1333 MHz (MT/s)
    Core: 45nm
    Code named: Yorkfield
    Power:95W
    Socket: LGA775
    Cooling: Liquid Cooled
    NVIDIAGeForce GTX 280 SC graphics card
    Features:
    1 GB of onboard memory
    Full Microsoft DirectX 10
    NVIDIA 2-way and 3-way SLI Ready
    NVIDIA PureVideo HD technology
    NVIDIA PhysX Ready
    NVIDI CUDA technology
    PCI Express 2.0 support
    Dual-link HDCP
    OpenGL 2.1 Capaple
    Output: DVI (2 dual-link), HDTV
    Western Digital
    2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
    Features:
    10,000 RPM, 3 Gb/sec transfer rate
    RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
    p/n: TW3X4G1333C9DHX G
    product: CM3X2048-1333C9DHX
    Features:
    XMS3 DHX Dual-Path 'heat xchange'
    2048 x 2 MB
    1333 MHz
    Latency 9-9-9-24-2T
    1.6V ver3.2

  • MUSIC VIDEO -SURROUND SOUND NOT WORKING WITH 7.0

    My surround sound 5.1 does not work with downloaded music video playblack on windows iTunes 7.0. It used to work before I updated to 7.0. At first, my surround sound would not work with 7.0 for any iTunes songs, not just downloaded videos. However, that was corrected with the version 7.0.1 update. However, surround sound still does not work on videos I am trying to play back. This includes music videos that I purchesed both before and after downloading iTunes update 7.0.1. Has anyone got any suggestions for how to fix this problem so that my surround sound 5.1 will work on playback of the music videos?

    I have an Airport Express that is linked to my TV. It is interfaced to my Denon AVR. To get surround sound I had to just select the correct output option via the Denon. Then the speakers set up for SS would work.
    MJ

  • Flash player does not work with Ie or Firefox with win 8.1?

    Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
    If I try and install it it says it is already installed. Your onsite  installer says it is not applicable to my machine.
    I have followed all the normal steps re enabling addons and active filters etc.
    all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
    Version of flashplayer is 15....03.......

    Flash Player is a built-in component of Internet Explorer.  There's nothing separate to download or install.
    Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
    For problems where IE isn't being detected by sites that require Flash:
    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • APPLE TV DOES NOT WORK WITH NETFLIX

    APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
    I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

    It started working.....!!!!!  (It seems someone back there is listening)
    I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
    I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
    TIPS:
    I didn´t change any language or video quality configuration (scared to do so)
    I changed to ethernet (cable) instead of wireless
    My internet plan is 6 Megabytes (it was the same while it wasn't working)
    good luck!!

  • Satellite 1800-100: video-out does not work

    He,
    I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
    Can anybody help me?
    Greets,
    Daan

    Hi
    Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
    Did you preinstall your own OS (non recovery image)?

  • Video Filter does not work.

    Hello.
    I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
    Is the software's problem?
    Thanks in advance.
    Ying

    For a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
    FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
    Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
    -DH

  • ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

    WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
    THE COMPANY NEEDS TO WARN PEOPLE.  THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

    The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
    Acrobat XI Pro system requirements
    These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
    Windows
    1.3GHz or faster processor
    Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
    512MB of RAM (1GB recommended)
    1.85GB of available hard-disk space
    1024x768 screen resolution
    DVD-ROM drive
    Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
    Video hardware acceleration (optional)
    Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

  • Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

    Hi,
    The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
    If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
    Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
    Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
    But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
    The same Webcam works just fine with Lync 2013 under Windows 7.
    Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
    Thanks

    Hi,
    According to your description, it may be caused by driver.
    You can try to install the latest version of Display Driver to fix the display issue.
    Since there is no driver for Windows 8.1, I suggest you wait for updating.
    You can also post a case on Windows 8 forum, thank you for your understanding:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Adobe Flash Player does not work with Safari. What can I do?

    Hi,
    I have a MacBook Pro, Retina, 15 inch, late 2013,  2 GHz Intel Core i7, using OS X 10.9.4. I have installed Adobe Flash Player. In my System Preference, in the advanced settings, it is set to install updates also tells me that I have the NPAPI Plug-in (version 14.0.0.145) installed but not the PPAPI Plug-in. Is this the reason why it does not work with Safari (keeps telling me to download the app, which I did but still does not work)? Is there any way I could fix the problem? Please, help.
    Thanks.

    If you can't install or update Flash, follow these instructions.
    If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
    Step 1
    You might have to log out or restart the computer before a Flash update takes effect.
    Step 2
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Close the window. Then select
               ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
              When visiting other websites
    From that menu, select either Allow or Ask.
    b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
    c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 5
    In the Safari preferences window, select the Advanced tab and uncheck the box marked
              Stop plug-ins to save power
    Step 6
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
              Flash Player (failing).plugin 
    You may be prompted for your login password.
    Step 7
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 8
    If you get a "missing plug-in" error, select
              Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked  
              Allow (or Enable) plug-ins
    Then click the button marked
              Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 9
    Select
              Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • RH 5.5 output does not work properly in RH 7

    I inherited a WebHelp project created in RH 5.5. I have RH 7.
    When I open the files, make modifications, and recompile them, the
    output does not work properly once I put it on our hardware box.
    Those infamous red squares are present and there seems to be a lot
    of .js files being called, but even when I do a straight 1:1 copy
    and include all the files, and delete the red squares, it still
    doesn't work right.
    Also, oddly, when I open the original (5.5) files in my v7 --
    even without making ANY changes at all -- the TOC has
    disappeared.

    When you view the upgraded source files in RH7, are the red
    squares seen the editor?
    When you generate to a local folder and view the output
    there, are the red squares present? Are there any other issues with
    the generated output?
    Have you applied all three patches to RH7? Help About should
    show 7.0.3.

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

Maybe you are looking for