S-video output PB G3 won't synch

I used to be able to display my s-video. Now I have 10.3.9 on my G3 292 Wallstreet and the video rolls when I send it to my tv. The old display settings with the "ntsc and pal" and mz don't show up in my displays available when I hook to the s-video inputs on my tv. I know it used to work under OS 10.2.8.
Anyone know what I am doing wrong? Thanks

I'm not an expert in this or anything, so these are just hunches, but I thought I'd offer them anwyay. Just last night I was getting my wife's PB with a dead backlight working on a TV as a temporary fix. I'm not sure of the specs of a Wallstreet, but can you turn on video mirroring? My wife's PB has 10.4.3, and when I do that I get options for the TV resolution/refresh, etc. on both displays -- maybe setting a lower resolution or refresh would stop the display rolling, then you might be able to turn mirroring off and change settings independently for both screens? But I'm not sure why it would roll anyway, when I first set hers up last night it was set to 1024x768 and that didn't cause a roll, just a really fuzzy image until I lowered the resolution.
Or is it possible that the display is too bright for the TV? I had a TV up until recently that whenever the screen was very bright (i.e. lots of white) the display would distort and sometimes roll. Is your 10.3.9 desktop background brighter than one you used in 10.2.8? Replace it with something darker maybe?

Similar Messages

IPod touch 3G won't synch new videos (SD) from iTunes

My iPod touch 3G won't synch any new videos (SD) I buy through iTunes. Tried restoring it twice, software is updated, de-authorized and re-authorized my Mac I'm synching to, manually managing videos (also tried the automatic synch with 3 and 5 most recent movies), creating iPod version (option grayed out), checked to see if some audio options (like surround sound) were selected on the videos and see if they were interfering (they weren't)...still no luck. I'm pulling my hair out. Just bought the videos solely to be able to watch on the touch. The new videos (6 of them...all bought directly from iTunes over a couple of weeks time) don't even register on the multicolor capacity bar when I select them while manually managing videos. Any help is greatly appreciated.
-R

No luck, but thx for trying. That was one of the spots I had been to before. I searched around the forums and tried everything I could find listed with no joy. I don't get any warning that the videos won't sync. All my previous videos bought on iTunes the exact same way work just fine. The only difference with these ones are that they are new (both newer content to iTunes and downloaded more recently). They will play from iTunes on my iMac perfectly, when I select them for sync onto my Touch 3G there's no indication that they even register (the capacity bar does not expand...but as if I select an older movie the bar increases to show the spce that movie will take up). If I manually select the (new) video it shows the movie as selected (minus the capacity bar increasing the requisite amount), the iPod syncs (no warnings or complaints from iTunes about the video format...and there shouldn't be, I got the video from iTunes), but the video is not on there on my iPod when all is said and done. Very frustrating . Thanks again for trying.

Vga or dvi to video output to NTSC TV viewing

GEAR: I have a G4 dual 1.25 (silver double doors) with an ADC and DVI output in the back.
OBJECTIVE: I need to go from that to an NTSC TV so I can see what my edits look like.
NOT SURE: I have seen the Apple adapter (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/7200505/wo/0K4TK pkMz7f922WszZYxFQMUy31/1.0.19.1.0.8.25.7.11.2.3) but it says it is for the MAC mini and the G5 only... does that mean it won't work for me?
OPTION B: Is getting a video card with an RCA or S-video output a better idea? If so which one? I am using both the ADC and DVI ports for two monitors, but would nuke one if necessary because I have to get this TV viewing capability up and running.
OPTION C for CANOPUS: I have also thought about the Canopus ADVC 100 or 300 so I can capture video from sources other than my DV Sony DSR-30. Right now, I have to record everything (everything that isn't DV) to DV on the DSR-30 before turning around to send it via firewire for capturing in FCP. Would the Caopus ADVC 100 or 300 also solve the TV viewing problem as well?
THANKS: in advance

Firewire to a DV/analog converter to your NTSC monitor. The only way for DV.
the DV/Analog converter can be either a dedicated converter (eg Canopus), a DV VTR deck (eg Sony DSR-11) or a camcorder.
the other options are not what you need.
cherios,
∏

IPad2 TV/Video Output!

I had brought up a similar question a few months back on this forum and my options were to say the least limited. However, with the new iPad2 I thought I would reentertain the question due to some of the improvements presented yesterday.
OK, so with the onset of the coming Major League Baseball season, I anticipate getting a subscription to MLB.com. That way I can watch my beloved Red Sox on my iPad when I am not around the big TV (i.e cooking dinner, working in the lab). So now that the iPad2 will have the capabilities of video mirroring and TV/Video output capabilities up to 1080p (w/ an Apple Digital AV adaptor or Apple VGA Adapter) could I then stream the games to the iPad, but then hook it up to my TV and watch the games on a bigger screen with the iPad2 providing the feed? This would be near HD, I think.
The main reason for this is that my cable company charges me about $185 for the baseball package, but MLB.com is only $99. MLB.com offers games in HD and the cable companies package is not.
Unfortunately, I am not a videophyle so I'm not 100% sure if this would work. But I think it might be enough to push me over the edge into purchasing an iPad2.
What do you guys think?
MSax

While I believe there is a way to accomplish your goal, I don't think that the HDMI adapter is the solution. In addition to the need for an HDMI cable from your iPad to the HDTV, it looks like only certain functions can be mirrored.
More specifically, there is talk that the app developer can choose to enable this feature or disable it. I am speaking of a Hulu app blog written since the HDMI adapter announcement. Knowing what I know about the MLB app and MLB.com, I wonder if they will allow it.
To recap, I have concerns that the device won't automatically allow mirroring of all Safari browsing and that the app developers won't enable it if you are using mlb at bat as your source.
Perhaps the 4.3 update will allow us to Airplay from the Safari browser or an MLB at bat app...
Best Regards

Firewire video output in high def?

Hi all,
I currently use a Canopus ADVC110 to firewire-output my video inside Logic to my beamer in "lo res" PAL DV format. However, the beamer supports up to 720p HD resolution so I'd like to have a firewire video output device than can handle this higher output resolutions (eg through HDMI or component). Canopus doesn't seem to have any capable products.
Anyone know of any options?
Or does it not exist due to limitations I'm not aware of?
Thanks!

assimilation is the bomb. the bomb.
i have been playing it repeatedly from the demo player at symphobia. i think i heard about 2 bars of it and by mouse automatically went to the buy button.
i have to tell you i am the stingiest bloke out there when it comes to buying stuff for the studio. i could end buying all manner of stuff and have a huge amount of things that i hardly use or don't have time to learn that could be covered by other things i do have. i keep a very basic setup and prefer to design my own sounds from scratch. i (we) have recorded quite a few orchestral FX we like to use, but there is never enough. symphobia is going to perfect for my next 2 projects - one of which is a very big one. unfortunately it may not arrive in time. there will be live records in prague but it won't cover everything and i am a little concerned by the reports i have heard from the other composer on the project.
there will be some london recordings but they will sweetening only.
sorry to hijack your thread BTW. i have long admired your music and this was the first opportunity to tell you so.

Photoshop CS4 video output

Hi, could i get a broadcast video output in Photoshop CS4.
I would to check colors on a PAL monitor, and i have only dv out
Thanks

You can get Firewire previews from PS Extended already. Please check the online help. If your Firewire ports and the device outputting the video signal to anlaog (your camera or a converter box) are not OHCI compliant, it won't work. the rest is unclear. That's exactly why people use compositing programs like After Effects with respective preview plug-ins for broadcast work or do it in their edit suite in the first place...
Mylenium

[SOLVED] Faulty video output with mpv/mplayer, vaapi

Hi,
I have a HD6870 with the proprietary catalyst drivers installed, and the packages needed to enable vaapi. The problem I have is that every video application like mpv, mplayer or whatever refuses to give me correct video output with vaapi. mpv for example gives me these errors, depending on filetype:
avi:
(+) Video --vid=1 (h264)
(+) Audio --aid=1 (mp3)
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
Using hardware decoding.
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
AO: [alsa] 48000Hz stereo 2ch s16
[vaapi] Decoder profile 'VAProfileH264Main' not available.
[ffmpeg/video] h264: decode_slice_header error
[ffmpeg/video] h264: no frame!
Error while decoding frame!
Error using hardware decoding, falling back to software decoding.
mp4:
(+) Video --vid=1 (*) (h264)
(+) Audio --aid=1 --alang=eng (*) (aac)
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
Using hardware decoding.
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
AO: [alsa] 48000Hz stereo 2ch float
xvba_video: XVBA_CreateDecode(): status 2
[vaapi] vaCreateContext(): unknown libva error
[ffmpeg/video] h264: decode_slice_header error
[ffmpeg/video] h264: no frame!
Error while decoding frame!
Error using hardware decoding, falling back to software decoding.
wmv:
(+) Video --vid=1 (wmv3)
(+) Audio --aid=1 --alang=eng (wmav2)
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
Using hardware decoding.
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
xvba_video: XVBA_CreateDecode(): status 2
[vaapi] vaCreateContext(): unknown libva error
xvba_video: XVBA_CreateDecode(): status 2
[vaapi] vaCreateContext(): unknown libva error
[ffmpeg/video] wmv3: decoding to AV_PIX_FMT_NONE is not supported.
Could not open codec.
Error initializing hardware decoding, falling back to software decoding.
mpv doesn't crash, it just falls back to software decoding and gives me a grey screen when it's not fullscreen, and when it's fullscreen it tears a lot and flashes random grey stripes everywhere - sound still works fine. Any ideas on what can be at fault here? The only video output that gives me an OK image without tearing or anything else is x11, but it's really slow.
vainfo gives me this:
libva info: VA-API version 0.37.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'xvba'
libva info: Trying to open /usr/lib/dri//xvba_drv_video.so
libva info: Found init function __vaDriverInit_0_32
libva info: va_openDriver() returns 0
vainfo: VA-API version: 0.37 (libva 1.5.1)
vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.8.0
vainfo: Supported profile and entrypoints
VAProfileH264High : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
Last edited by Median (2015-06-07 10:01:38)

Gusar wrote:
Uninstall libva-xvba-driver and do
export LIBVA_DRIVER_NAME=fglrx
Now try vainfo again. Instead of "Splitted-Desktop Systems XvBA backend for VA-API - 0.8.0" it should say "AMD MMD 1.0" or something like that.
Thanks, now VA-API at least gives me an output - but the video just flashes in fullscreen. I think another thing to notice here is that the video only plays correctly (gives me an output), if I play it on monitor 1 (I use three monitors) - but I can't get rid of the screen flashing.
EDIT: Fullscreen only flashes when I use mpv, with smplayer (+mpv) it works ok - but it lags from time to time. mplayer-vaapi won't give me a smooth playback either with -vo and -va as vaapi, and the screen also flashes when I'm using it.
Any idea on what's wrong? Is it my use of three monitors? This is really, really annoying.
Last edited by Median (2015-06-06 18:51:40)

LT1421 as a general video output device

I know the LT1421 is generally used as a secondary monitor for one's PC, but I was wondering if it would function as a video output device for hardware such as a USB digital microscope, or a document camera.
Imagine I have a digital microscope with an AC adapter as well as a USB video output. Could I plug the USB from the digital microscope into the LT1421 and not only power the display via the microscope, but also view the microscope's video?

Unless these devices support displaylink technology then no it won't work.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

K8N Neo Platinum: no video output, long beep and long wait, led 3 green

I have a K8N Neo Platinum for about 4 years without big problems. Two days ago I dismounted teh pc to clean and put a new HD and when I mounted again it did not work.
Problem:
Quote
* System hangs and no video output;
* Speaker keep making long beep followed by long rest;
* D-Bracket LEDs are 3 green and 1, 2, 4 red meaning it hangs somewere near teh keyboard controller initialization;
What I have tried:
With no change:
Quote
* Taken off everything from teh MB and put back only CPU, PSU, RAM, VGA and plugs for power and reset switch;
* Turn on teh MB out of teh case;
* Clear teh CMOS setting JBAT1 and by removing battery;
* Tried all possible combinations of one and two RAM sticks and slots on MB;
* Take out all of teh RAM;
* Take out VGA;
* Take out RAM and VGA;
* Switched VGA;
* Switched PSU;
With little change:
Quote
* Take out CPU: make all four leds red and no beep.
System specifications:
PROC
Athlon 64 3400+
RAM
2x Kingston 512mb ddr400
VGA
nVidia geforce4 mx 440 agp
VGA2
nVidia geforce fx 5200 agp
MB
MSI K8N Neo Platinum
HDD
Seagate SATA 180gb
PSU
Coletek 450W +3.3V~20A, +5V~32A, +12V~16A, +5VSB~2.0A, -5~0.5A, -12~0.5A
I have already had some problems like this before with power failures but magically things worked again. This time was teh same. I got things working some times at random (really random lol) by taking power cables, reseting bios and turning back on but teh problem reapeared when I put HDD back and did not work again when I removed it. Now I can't seem to get it to display anything.
Any suggestions? Thanks in advance.
EDIT: sry I made a little confusion: It is a K8N Neo and not a K8N Neo2.

Quote from: Fredrik on 18-November-08, 05:19:33
Thanks!
Keyboard problem, you think? What do you have?
Two things that are quite common:
Do not attach PS2 keyboard when there is power in the system.
Do attach USB keyboards when you are up and running in Windows.
This is not it, but Logitech keyboard drivers often complicate things.
I do use a PS2 kbd but never had problems with it (unlike teh PS2 mouse). I do not think it's kbd fault because it won't POST with or without it.

Ipod won't synch because it's synched w/another library

authorized new computer, but ipod won't synch because it's "synched w/another library" - how do i connect it with my new laptop?

hey there,
That is the same for iphone and ipad. I assumed the machine you were authorizing is the ONLY machine you want to sync with. If that is correct what I said is correct.
If you want to sync your ipod with multiple machines then it is different, here is a video made earlier that answers that specific. There are loads of ways to do, and some great software (3rd party) it but this is the easiest in the video and all part of itunes secret ways. http://bit.ly/1device

After IOS 8 upgrade on phone, documents no longer synch in Pages. I find out subsequently that when I upgraded it gave me iCloud Drive, which won't synch unless my computer has OSX Yosemite, which isn't available. Apple says they can't get me back.

Apple upgraded me to a new IOS that has now eliminated my ability to synch Pages docs which I've been using quite successfully. So now every time work in pages it tells me that my documents won't synch and to "upgrade to OSX Yosemite." The problem: Yosemite IS NOT AVAILABLE yet. Will they let me go back to the old way until Yosemite is available? No they will not. I'm stuck with devices that won't work together. I recall no warning that by upgrading to IOS8 would mess up my ability to use my devices as intended -- that my devices would be less compatible. I feel duped and manipulated. And to clarify, I only updated on my phone. Once I saw (subsequent to update) that my synching of docs would no longer work, I decided not to upgrade my iPad mini. But guess what -- just updating my iPhone has now changed me to iCloud Drive and that means that all of my devices are incompatible.

That happened to me. I rebooted and now my docs are back again.

How connect a 27 cinema display to HP Pavilion with VGA video output

how connect a 27 cinema display to HP Pavilion with VGA video output

If it is a thunderbolt version of the apple 27" display, you don't. The TB displays can only work with a TB source.
I also think you are out of luck with the mini-displayport versions of the apple 27" as well. This would imply converting an analog VGA output to a digital input of the 27". I suspect that there is not enough data supplied by VGA for that to work and I do not believe any adapters exist for this.

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

TV (video) output from new nano looks very good!

Just a comment for those who may be wondering how the video quality on the new iPod nano looks when output to a TV. I have one of the old iPod AV docks with the s-video port and the new nano seems to work fine with that combination (using a standard s-video cable between the dock and the TV). Thus far I'm really impressed with the video quality, I can't see a single problem, the color is good, the quality and sharpness is as good as I've seen from any iTunes Store content, and as far as I can tell the frame rate is fine (no stuttering, skipped frames, or problems with audio sync). I'm amazed that such high quality video can come from such a small device. If it continues to look this good (after viewing more content and after more testing) then I think Apple may have "hit one out of the park." This thing could turn out to be the most popular iPod yet (if you have any interested in video and still want a small device).

I just found out that the video out (TV) on the new nano supports video playlists so you can create playlists for back-to-back display on the TV. Not even the AppleTV will do that (even though the latter has been a highly requested feature for the AppleTV since day one). In fact, if you can do without the on-TV menus you may find that the nano is a better video output device than is the AppleTV (that is, the menus system on the nano doesn't appear on the TV output).
Also, I just competed a few hours of video playback to my big-screen TV from the nano and I'm still impressed. No video problems at all, looks very good considering the quality limitation from the content that is currently on the iTunes Store (limited to standard definition, no HD movies, HD TV, or HD music videos as yet).

Video output failure

I have a 2008 black MacBook, a Mini-DVI-to-VGA adapter and a Mini-DVI-to-"Video" adapter (AKA a Mini-DVI-to-RCA-and-S-Video adapter). The -to-VGA adapter /was/ working fine.
After I got the -to-video adapter I was having some problems making it work. A few places said I had to set it to 50Hz (which makes no sense as NTSC is 60Hz, but anyway), but that option wasn't available to me. I poked around, and apparently made the video out go completely insane. Now, when I plug in either adapter (regardless of whether anything is plugged in to them), the screen goes blue for a moment as if it's detecting a new display, but then it just goes back to normal with no new display detected. Running "detect displays" manually makes no difference, and neither does having something plugged in on the other end or not.
At this point, I can't use video output for any purpose, which is sort of annoying ...

Coverage of this problem here:
http://blogs.zdnet.com/Apple/?p=2108
http://www.electronista.com/articles/08/08/08/nvidia.fault.in.macbooks/

S-video output PB G3 won't synch

Similar Messages

Maybe you are looking for