S-Video/Second Monitor

Im not sure what kind of Laptop I have but here is my problem. I am trying to connect the s-video cable to an old tv. I got it to work using a rf modulator. At first it was working fine, but now when I go to the display menu and try to attach the 2nd monitor and hit apply, the second monitor wont be attached. I just want to watch movies instead of buying a new DVD player....someone please help....

Hi K T Thank you!
Usually no application at all, except a resident dyndns client and sometimes Mail and Safari.
I haven't Firefox.
VLC version 1.0.3, MPlayer rev 12 1210, Plex 0.8.5
It's not a CPU overload problem, maybe a GPU problem (is there any tool see it?)
If I disconnect the second monitor in the same conditions and restart to play, in the main monitor I don't have any frame drop.
Frame drops happens both in fullscreen than in windowed mode, when second monitor is connected and enabled. But also the entire UI of the systems seems a bit less smooth.
And, another particular I noticed, with second monitor enabled, I have HEAVY frame drops expecially in MPlayer in fullscreen when mode I move the mouse bringing up the comand panel, like some problems on the Alpha channel for overlay/transparencies...

Similar Messages

How do I get my Mac Pro to see the second monitor through a video splitter and/or switcher?

In a recording studio we have a Mac Pro with two video display monitors in the control room and we want to be able to show the content of the second monitor to the person in the recording room on a big display monitor there. However, when we interpose a switcher or splitter between the computer and the second monitor so that we can (with a switcher) switch the second monitor signal from the control room monitor to the record room monitor or (with a splitter) split the signal to go to both monitors, we have no luck. On startup the computer does not see the monitor through the switcher, so it doesn't recognize its existence. If we start the computer up without the switcher in the signal chain, it sees the second monitor just fine, and (weirdly enough) we can then change the cabling to interpose the switch, which then works to switch back and forth between second monitors (control room and record room), but that cable swapping's a royal PITA. We want a simple solution that will allow us to start up the computer, see the second monitor in the control room, then choose to show it to the person in the record room with a simple flip of the switch (or even better, split the signal so it's available both places). The splitter we've tried most recently is this one: http://tinyurl.com/curen39 I'd appreciate any advice from people who have tried this configuration or something similar with success. We have a full ProTools HD Accel 3 system installed, so there's no room to install a second video card. Thanks.
Mac Pro 8-Core 2.4 GHz, OS 10.6.8

Christopher Dobrian wrote:
Thanks for the response! Yes, it's a 5x70 video card, a 5770 I believe. In any case, it does have the three ports, but (a not-well documented fact) that doesn't mean one can really get three full-resolution signals out of it at one time, as you alluded to in your message. So, yes, we did try hooking all three up directly to the computer, but the computer would only recognize two of those monitors, and the only way to get it to "de-recognize" the second monitor and recognize the third monitor was to physically disconnect the second monitor.
I did say when you want to connect three monitors to 5x70's there are some rules to adhere to. These are covered in the first two apple docs mentioned above, or by title:
Mac Pro (Mid 2010), Mac Pro (Early 2009): Issues with three displays and multiple DVI, HDMI connections
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
The general gist of these rules is that to drive three monitor son a 5x70 you need two active adapters. That is why one of your monitors was disabled when you tried to add a third.
Here's a good explanation of what's going in here and why you need two active adapters on these cards:
Active vs. Passive Displayport adapters *the truth*
If you use DVI monitors and any of them have resolutions less than 1920 x 1200 then you can use single link active adapters. The "AMD Eyefinity Validated Dongles" chart shows some active (and passive) adapters that are acceptable. For example of a single link DVI active adapter is the Accell B087B-006B. An example of a dual link DVI active adapter would be the one from monoprice.com if you need to connect monitors with a resolution greater than 1920 x 1200.
I'm doubtful that SwitchResX would be able to convince the computer that there were only two monitors connected and direct the second monitor signal to the correct place, but it certainly seems worth a try, so thanks for the idea! Any other ideas are still welcome in the meantime.
I'm not doubtful. It is a very powerful utility for dealing with all aspects of multiple monitor configurations (they call them "Display Sets") complete with forcing EDID information if necessary. The different configurations can be controlled with a (contextual) menu and/or hot key.
SwitchResX is academic at this point if you want to have all three monitors connected. You would need to get that working first. Then use SwitchResX to vary the configuration combinations. So if you go this route the "name of the game" is figure out the active adapters you need.
I only described in general terms above about the adapters since you never said exactly what kind of connections these monitors require (single link DVI, dual link DVI, hdmi, mini-displayport, vga).

Play itunes videos on a Large Second Monitor

Hi Folks,
Ultimately, my goal is to have a late model Mac Book Pro, connected to a least a 24 in. secondary monitor or High end Larger tv 32-50 inches or so connected through a HDMI cable.
Then I would like to run iTunes - in which the APP will show on the laptop screen, and as I trigger videos from iTunes - they will play on the secondary monitor - all in my preset large size.
Currently - in my testing I have a Vista PC laptop running iTunes (latest) and 24 in. secondary monitor.
At first I set video preferences : separate window full-size - but each time a video played - it would black out the laptop's screen which I do not want to do - since I need to use iTunes while the video plays... (to select other videos etc.)
The video prefs were then set to: open in a separate window
At first - I started playing a video - and dragged it to the 24 in. monitor and set it to a large size
As I jump from video to video - many times the newer video would resize itself to a small window - often different for each one - and I would have to manually resize it... not what I wanted to do.
So - I set up one large screen size - then I selected all the videos - Control-i (get info) - and set all of them to remember playback position....
Then - as I jumped around from one to another - they seem to stay closer to the size I want - But some still get smaller and bigger...
Q: how can I set this up - so all videos will play on the second monitor in the same position and size window for each one?
Is this better on a MBP or should Vista PC work right also? Is it better on the latest mac w snow leopard?

*I was wondering if you can play music videos on a second generation iPod nano.*
The second generation Nano is not designed for video playback and won't load music videos, video podcasts or other video files.
*It has a space for music videos but I'm not sure if you can play them*
iTunes has a default video playlist, the Nano picks this up but not any files that are contained in it.

Can Second Monitor Play VLC Videos?

I use a mid 2012 Mac Pro; run Mavericks. I plan to use my TV as a second monitor. I know that I have to use AppleTV to connect wirelessly to my TV. Will AppleTV allow me to play "VLC" videos?

virwill wrote:
Tried with Firefox and the AdBlock disabled. It went a step further -- on Safari, the video button just disappears -- but just got a black screen. Please forgive the clunky replies, but when I reply to the specific comment, I get an error message. When I use advanced editor, it plunks the reply down here, as if I'm replying to my own question.
Sounds like you have "other" issues, perhaps a corrupt cache file.
Backup your data off the machine just in case and disconnect all drives, then run all of OnyX's maintenance and cleaning aspects and be sure to reboot at the end.
See how that works for you, like giving your OS X a enema.
http://www.titanium.free.fr/

Watching a DVD or QuickTime video, my second monitor goes black. Is there a fix for this?

While watching a DVD or a QuickTime video, my second monitor goes black. Is the a fix for this?

wanted to add my battery details:
Battery Information:
Model Information:
Serial Number:          W0037TD07E1LA
Manufacturer:          SMP
Device name:          bq20z451
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0201
Hardware Revision:          000a
Cell Revision:          0165
Charge Information:
Charge remaining (mAh):          0
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          5316
Health Information:
Cycle count:          73
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          8563

Video preview through second monitor

I'm running PPro CS5 on a mid 2010 Mac Pro with an ATI Radeon HD 5770 graphics card. The card can feed up to 3 monitors - of which I have two connected right now. In Encore I can choose to preview from either monitor, but in PPro I seem to get only two options - 'None' and 'DV'. In CS3 (on a PC) I used to be to enable this with the Desktop setting.
How please do I set things up to find my second monitor? I have updated my Mac's software (which should pick up the latest approved graphics drivers), so I don't think it's an ATI problem.
Thanks very much
Julian

Here you go Jim. A little cramped for me having the main Premiere interface on one screen, but it will do for now. If I can get the third screen running, I wn't really need my MX02 Mini - which doesn't yet work properly on the Mac anyway...
Good luck with making your system work this way. Let me know if I can help further.
Julian

How to connect my Cinema Display as a second monitor

I just purchased a new 27-inch iMac, and I explained to the Apple folks that I had a 17-inch cinema display (silver clad model) that I wanted to connect, for a dual monitor set up. They told me just to get the Mini DisplayPort to DVI Adapter, but I was surprised to realize that's not going to work.
Can anyone tell me how to do this, and what connector is actually needed? I have the big old white power brick that I bought to daisy chain my old 17 and 23 inch displays with my old configuration (Mac Pro).
Or can you not have a second monitor with an iMac?
Thanks in advance.

Hi Cathy,
What connector is on that Cinema? ADC, VGA, or DVI?
Video Card:
GeForce GTX 675MX
VRAM Type:
GDDR5
Details:
This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
Standard VRAM:
1 GB
Maximum VRAM:
1 GB*
Built-in Display:
27" 16:9 Widescreen
Native Resolution:
2560x1440
Details:
This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html

Connect a g5imac to a g4 powerbook as a second monitor

Is this possible?
I want to use the laptop as a bigger screen to aid in editing, is it possible?
I have a powermac g5imac with 2 gig ram in.
Thanks in advance.

Andy simply answered your very specific question. Now, if you want to hook up a second monitor (not the laptop as you first asked) to your iMac then you may get a few longer answers. Like, Maybe.
If you are editing DV then you should be able to connect your DV cam or deck via FW then connect a monitor to your camera or deck. However, this will just give you a playback monitor, you will not be able to extend your desktop to this monitor. With an iMac I think that is impossible to do because of the lack of additional video (DVI or VGA) outputs.
Long enough?
K

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter.

DVI- HDMI discoloration on HDTV (as second monitor)

Hello all.
I have been having some issues when using my Philips CRT 30" 1080i HDTV as a second monitor via a DVI->HDMI cable. There seems to be a discoloration that occurs (my best guess being a "green" discoloration) that occurs in the top left corner of the screen. It is made all the more apparent when you then unplug, and a purple haze is left in the corner of the "blue" video input channel. (i imagine the green discoloration on the blue channel yields purple).
From what I can tell, this problem does not occur on any other video input (say, a Wii on the composite channel, or an XBOX on the component, etc).
I had heard rumblings that it could be, in order of bad to worst: a bad HDMI cable, a bad HDMI input on the television, or the television going bad period.
Wanted to know if any of you have had or heard of similar experiences. Need to decide soon if I'm going to had to just buy a new HDMI cable, or if I need to buy a new television/monitor for a job coming up.
Thanks in advance!
Brian
4/30/10 2:47 PM
Hardware:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Sudden Motion Sensor:
State: Enabled
Network:
Bluetooth DUN:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
Service Order: 0
Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
Service Order: 1
FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
Service Order: 2
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
Has IP Assigned: Yes
Service Order: 3
Software:
System Software Overview:
System Version: Mac OS X 10.6.3 (10D573)
Kernel Version: Darwin 10.3.0
64-bit Kernel and Extensions: No
Time since boot: 12 minutes
ATA:
ATA Bus:
MATSHITADVD-R UJ-857E:
Model: MATSHITADVD-R UJ-857E
Revision: ZA0E
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Power Off: Yes
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x106B00A0
Audio ID: 44
Available Devices:
Speaker:
Connection: Internal
Headphone:
Connection: Combo
Internal Microphone:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.3.1f4
Hardware Settings:
Vendor ID: 0x5ac
Product ID: 0x8205
Devices (Paired, Favorites, etc):
Device:
Type: Mouse
Firmware Version: 0x200
Services: Mighty Mouse
Manufacturer: Broadcom (0x2, 0x314)
Vendor ID: 0x5ac
Product ID: 0x30c
Diagnostics:
Power On Self-Test:
Last Run: 4/30/10 2:35 PM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZA0E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > Refresh
Ethernet Cards:
pci168c,24:
Type: Other Network Controller
Bus: PCI
Slot: PCI Slot 5
Vendor ID: 0x168c
Device ID: 0x0024
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0087
Revision ID: 0x0001
Link Width: x1
BSD name: en1
Kext name: AirPortAtheros.kext
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros.k ext
Version: 422.19.10
Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA:
Name: ethernet
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x11ab
Device ID: 0x436a
Subsystem Vendor ID: 0x11ab
Subsystem ID: 0x00ba
Revision ID: 0x0013
Link Width: x1
BSD name: en0
Kext name: AppleYukon2.kext
Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2 .kext
Version: 3.1.14b1
FireWire:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
G-Drive mini Device 00:
Manufacturer: G-TECH
Model: 0x0
GUID: 0x1C0D02E00B0A3E
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
G-Drive mini Device 00 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x103
Product Revision Level: FBEO
Sub-units:
G-Drive mini Device 00 SBP-LUN:
Capacity: 250.06 GB (250,059,350,016 bytes)
Removable Media: Yes
BSD Name: disk1
Partition Map Type: APM (Apple Partition Map)
S.M.A.R.T. status: Not Supported
Volumes:
disk1s3:
Capacity: 249.93 GB (249,925,091,328 bytes)
Available: 21.68 GB (21,684,412,416 bytes)
Writable: Yes
File System: Journaled HFS+
Graphics/Displays:
NVIDIA GeForce 8600M GT:
Chipset Model: GeForce 8600M GT
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3175
Displays:
Color LCD:
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected
Memory:
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x7F7F7F7F7F9B0000
Part Number: 0x4354323536363441433636372E4D31364647
BANK 1/DIMM1:
Size: 2 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x7F7F7F7F7F9B0000
Part Number: 0x4354323536363441433636372E4D31364647
PCI Cards:
pci168c,24:
Type: Other Network Controller
Driver Installed: Yes
Bus: PCI
Slot: PCI Slot 5
Vendor ID: 0x168c
Device ID: 0x0024
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0087
Revision ID: 0x0001
Link Width: x1
Link Speed: 2.5 GT/s
Serial-ATA:
Intel ICH8-M AHCI:
Vendor: Intel
Product: ICH8-M AHCI
Link Speed: 1.5 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
FUJITSU MHW2160BHPL:
Capacity: 160.04 GB (160,041,885,696 bytes)
Model: FUJITSU MHW2160BHPL
Revision: 0081001C
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s2:
Capacity: 131.94 GB (131,936,026,624 bytes)
Available: 23.73 GB (23,733,391,360 bytes)
Writable: Yes
File System: Journaled HFS+
disk0s3:
Capacity: 27.63 GB (27,626,639,360 bytes)
Available: 13.65 GB (13,652,635,648 bytes)
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x2836
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Product ID: 0x8502
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.45
Serial Number: 607F59A99AB2811A (03.00)
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 500
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x283a
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0xfa
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2835
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x3a
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2834
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1a
Bluetooth USB Host Controller:
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Inc.)
Version: 19.65
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a100000
Current Available (mA): 500
Current Required (mA): 0
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2830
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2831
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2832
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x5d
Apple Internal Keyboard / Trackpad:
Product ID: 0x021a
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.18
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer
Location ID: 0x5d200000
Current Available (mA): 500
Current Required (mA): 40
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0x5d100000
Current Available (mA): 500
Current Required (mA): 100
AirPort:
Software Versions:
Menu Extra: 6.2.1 (621.1)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2.1 (621.1)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x87)
Firmware Version: Atheros 5416: 2.0.19.10
Locale: FCC
Country Code: US
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Status: Connected

Problems like that are caused by stray magnetism that cause misalignment of the electron beams from landing on the proper phosphor color. The set itself has a demagnetizer, but sometimes the magnetism is too strong for the built-in demagnetizer to overcome. But calling in a TV repair person to do a demagnetization is, I'm afraid, a throw back to bygone days. But that's what your TV needs.

Using a TV as a second monitor

I'm trying to use a TV as a second monitor (for watching movies) with Windows through Boot Camp (netflix instant play isn't support in Mac yet). When I plug in the mini-DVI adapter with the yellow video cable, my screen goes blank for a moment and comes back on but nothing happens on the TV. I've tried updating the nVidia and ATI drivers in Windows, but they won't install properly. My System Profiler says I'm running Intel GMA x3100 graphics. I've tried what I can think of and what I've read. Can anyone offer advice?

Robert Enyeart wrote:
Thanks but what I am looking for is a wireless connection between my mac and my tv screen
you might be able to devise a workaround (with old Mac or PC) using ScreenRecycler.

Problems with my second monitor after upgrading to Mountain Lion

Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
Have anyone experienced the same problem?!

Hello Carlo!
Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain.

Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI

Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI in without any additional software or graphics adaptor. I have a 520-1070
HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not recognized.

Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How do I Add second monitor to ALL in One ENVY23 that has a HDMI port

How do I Add second monitor to my ALL in One ENVY23 that has a HDMI port the computer has Win 8 Model #: 23se-d494
Product #: F3D93AA#ABA
Serial #: [edited Serial Number by Moderator]
Software Build #: 14AM1HRA601#SABA#DABA
Service ID #: 20140521
PCBRAND #: HP

Here are the specs for your HP ENVY TouchSmart 23se-d494 All-in-One Desktop Computer. Based the specs, the HDMI port on the side of your computer is an INPUT only. This model doesn't have a video output of any kind.
1 - Controls 2 - HDMI In port (model dependent)
You will need to purchase and use a USB-to-video adapter such as the EVGA UV Plus+ UV39 (or any of the many other adapters on the market) to connect an external display to your computer. I personally use and recommend the EVGA UV Plus+ UV39.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How do I add a second monitor to an HP Pavilion M8200N

When I look at the ports in the back there is only one VGA port but no DVI port. There are about 4 USB ports one 1394 style port and an RCA video and audio jack labeled Input ( there is also a set on the front also showing as input) . Can any of these be used to add a second monitor. There is also a jack that looks like its for a telephone in green. and some various audio output jacks. As of now I havn't purchased a second monitor due to needing to know what ports it should have to connect with this computer. If it can't be done I will save my money.

Hi,
Based on the following link, you don't have any choice w/o spending more money to add more hardware:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01151028&tmp_task=prodinfoCategory&cc=us&dlc=en...
To be honest, I would not spend more money to this machine, this may end up cost more money than to buy a new machine (w/o monitors - assuming you already have 2 monitors).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

S-Video/Second Monitor

Similar Messages

Maybe you are looking for