S1 Yoga with ghosting - Looking for a replacemen​t screen that doesn't ghost

I've had this system for around three weeks now and I can say that, while not terribly bothersome, the ghosting issue is definitely present and always makes me a bit concerned when using the device for long periods as I've heard some things about the retention growing worse over time. With that considered, I've two questions. The foremost is to what degree does the image retention grow worse over time, and how severe is it likely to become on a system that is used 6 or 7 days every week and anwhere from 2-5 hours each of those days? Secondly, I've heard that newer systems are shipping with screens that do not display any sort of retention problem and that service centers have such screens available. Would it be possible to obtain a replacement screen, which doesn't experience the retention issue, that I could simply swap myself? I would prefer not to have to send my laptop to a service center because I have a very regular need for it and couldn't spare it for more than a few days during the upcoming holidays. I have quite a considerable amount of experience working with such devices and making FRU swaps, and am confident that I could make the swap (assuming that the process isn't too particularly difficult), especially with reference materials to guide myself. Any feedback or information is appreciated. Thank you for your time.

What is the total weight of the page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Mike" <[email protected]> wrote in message
news:g919hl$56g$[email protected]..
> After looking at all my options, I ended up opting for
Micha's recommended
> 2-images-in-1 technique to swap images on hover (at
least for now, as a
> test run).
>
> Naturally, since all these thumbs are PNGs, and the
information has just
> doubled in size, the load time of the page is going to
be affected, if
> only by milliseconds on high connections. This isn't as
big a deal as it
> could be, because the page is very specialized, will not
get much traffic,
> and is targetted at web professionals who are all at
high to very high
> speeds.
>
> All that being said, I might feel a bit better with a
loading screen. I
> don't even know if that can be done reliably (I don't
want the screen to
> 'guess' how much more loading there is to do, or put a
static pause in
> there... I only want to do it if it's reliably
accurate).
>
> A single loading screen for the entire page, naturally
(not per image).
>
> Anyone know where I can find such a script?
>

Similar Messages

  • HT4400 I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

    I'm looking for a Braille note system that interacts with IPAD. This will be use in a classroom settings where you see both the braille & text communicated simultaneously.

    This should be able to help ya out -> Support for wireless braille displays in iOS 6

  • I'm looking for a digital picture frame that is compatible with the iPhone 5 and 4S.  I was looking at the Panasonic MW-20 but from what I can see I don't think it is.  Any information would be great!  Looking to buy a replacement frame for Christmas.

    I'm looking for a digital picture frame that is compatible with the iPhone 5 and 4S.  I was looking at the Panasonic MW-20 but from what I can see I don't think it is.  Any information would be great.  Looking to buy a replacement for Christmas.  Thanks!

    Hi - the new lightning connector on the iPhone 5 has an authentication chip so very few 3rd party manufacturers have come out with compatible devices - so I doubt that you will find a frame that works for both phones - however Apple has come out with 2 apapters - one is a cable and one is a direct 30 pin to lightning device - you would have to check out each frame to see if one of these might work - I looked at the Panasonic and it looks promising but I would check the return policy of anything that you buy in a case it doesn't work.

  • Looking for a retail available camera that is compatible with FMLE

    I am looking for a retail available camera that is compatible with FMLE.  I do not have a computer with HDMI input, and in the past, I have typically ran with a USB connection.  Does anyone know of a camera that is available at a local retail store that would work with FMLE through a USB connection?

    Webcams will work, although they may not give you the flexibility that you're looking for with a more traditional "camera".
    You may be more interested in looking at a converter/digitizer -- something that can take a variety of inputs and pull those into your computer as a a video source that your computer, and FMLE, sees as a "camera". 
    Look at this page:  http://www.adobe.com/products/flashmediaserver/flashmediaencoder/devicematrix.html
    You'll see a variety of webcams, capture cards, cameras, and other devices that are known to work with FMLE.  Most of those solutions, however, require the installation of a card or require that you have Thunderbolt connections or FireWire connections.  Not on that list is the Dazzle line of digitizers.  I know several people who use Dazzles with FMLE -- and while each one seems to have issues that you have to be aware of, they do work (some better than others).  As long as you're aware of the issues, it's not a problem working with these devices -- and they're pretty inexpensive.  The Dazzle Video Creator Platinum seems to have the least amount of problems (the only real problem that I'm aware of is that you have to be sure to disable your preview windows in FMLE if you want to make changes to the source settings -- or it will crash FMLE.  But, once you get your settings in place you can enable the preview windows again and don't have to worry about it).  The great thing about a digitizer is that you can now use any camera that can output to standard composite cables (the yellow, red, and white 'RCA' cables -- or SVideo cable).  So your camera selection possabilities increase greatly.
    If you're looking for a standalone camera that can deliver a live video feed through USB -- good luck.  I'm sure they're out there, but your choices are going to be very limited.
    Personally, I use the Canopus ADVC110 -- which allows me to hook up any camera (or even a playback deck/DVR/DVD player, etc.) that can output composite (RCA) or FireWire or S-Video.  The ADVC110 will not work for you, as you need FireWire to hook up to your computer, but just in case you do have FireWire I can tell you that it is a stellar box with no issues at all.

  • HT204266 looking for the old Netflix app that will work on original Ipad with ios 5.1.1

    looking for the old Netflix app that will work on original Ipad with ios 5.1.1

    Netflix does in fact have the old version of their app available.
    In iTunes on your computer, download the App you want a compatible version for using the same Apple Id that the iPad has for the App Store. For Paid Apps its best to consult with the App maker to make sure there is a compatible App. With the App Downloaded to iTunes on a computer you can go into The App Store App on your iPad, Tap on Purchased, and Look for the App there. Tap on it to begin the download. It will likely say its not compatible, but if there is a compatible version it will offer to download it. Install the latest compatible version of an app on an earlier version of iOS or OS X

  • Looking for an Appointmen​t Calendar that does THIS...

    I'm a stylist who owns a 700wx with Verizon. I am looking for an appointment calendar app that does ALL of the following?
    1. Books 15 minute appointments.
    2. Jumps weeks at a time (For example, a client wants to rebook for 6 weeks... I don't want to count the weeks, I want to tap them)
    3. Appointments can be booked with contact names. (For example, March 27th at 6pm... book this Contact... >?)
    4. Notepad or other type popup for notes (What services, what price, special situations...etc)
    Or does anyone know of any Salon Appointment software available for the 700wx?
    Post relates to: Treo 700wx (Verizon)

    Ok. I didn't see "Attendees" as being the same as Contacts.
    I don't want recurring appointments... although I will use it, just more rarely. I want it to jump weeks. (Some salon software has links that actually say "Jump 4 weeks" or 4 weeks, 6 weeks, 8 weeks" etc.
    Can it remember appointmnt TYPES? Like, meeting is always 15 minutes, or hilight is always an hour? Or will I always have to specify how long to block? I'm not sure if I'm explaining this correctly. Is there a way to set up preset appointment TYPES and their duration???
    Post relates to: Treo 700wx (Verizon)

  • Looking for a java-based SDK that handles file conversion to PDF and TIF...

    Hi all,
    First off, this is my first posting so I'm not 100% sure where to post this topic. So please forgive me if I'm accidentally posting in the wrong location.
    My question deals with a project I am currently working on.
    I am looking for a java-based SDK that can meet the following requirements...
    1) convert all printable file-formats (i.e. JPEG, DOC, TXT, PPT, etc.) into PDF
    2) merge multiple PDFs into one PDF
    3) convert PDF to TIF or at least do some sort of conversion to TIF
    4) works in Java or some sort of web-based language
    5) free or relatively cheap
    Any advice/suggestions would be greatly appreciated.
    Thank you very much.

    I don't think you will get one API to do them all.
    Some helpful hints:
    [http://schmidt.devlib.org/java/libraries-pdf.html]
    [http://xmlgraphics.apache.org/fop/] (with the pdf-image extension, that I can't find now :shakefist)
    JAI

  • I have 300 stores and I'm looking for a global QOS config that would shape/policy the bandwith based on a % of the detected ISP link speed

    Hi,
    We have 300 stores with mostly the same router config.
    The router in each store is a cisco 891 router capable of doing QOS.
    Each of our store is connected to internet through a local Internet Service Provider (ISP).  They all have different ISP.
    Each store has different Internet plan with different speed, some are DSL, other are using cable modem.
    The connection between the router and the modem is 100Mbps. But the real speed after the modem will be different depending of the Internet plan the store is using. Exemple : 20Mbps download / 2Mbps upload.
    I'm looking for a standard QOS config that would be put in each routeur and that would shape/policy the bandwith based on a % of the detected ISP link speed.  The goal here is to prevent a single desktop computer of the store to take all available bandwith of the ISP link because of youtube , cloud photo upload, etc.
    Because the wan of the router is in the modem at 100Mbps, I cannot use this bandwith indication for the % calculation. The ISP link speed (after the modem)  is much lower than that.  
    In other words, I dont want to set specific qos value or bandwith manual value in each of my 300 router. Especially because the ISP speed is not the same in each site, it's a big job and it's changing all the time.  Stores owner boost their link, etc.
    So, Is there a way within the router to detect the Wan real max speed and to assign dynamically % of the deduced value and assign it to different policy-map rules, etc.
    regards
    Jonathan D

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    I'm unaware of any (one) "built-in" feature that will do what you're desire.  (BTW, I don't believe PfR, as mentioned by Matt, will do what you desire either, but I've haven't used it in several years.)
    I was looking to address a somewhat similar problem several months ago, and believe I could construct dynamic QoS shaping using an embedded device script working with IP SLA monitoring.  However, the "problem" site (using a cable modem) closed, so I didn't pursue it further.
    An alternative approach would be to use as few policy models as possible.  For example if there are sites with 2, 3 or even 5 Mbps uploads, you might use a 2 Mbps shaper for each.  Of course, sites with more available bandwidth won't obtain the full advantage of it, but your maintenance support will be easier.  Conversely, especially for cable modems, running under their nominal speed might provide much more predictable performance, as HFCs are generally much more variable in their actual available bandwidth, moment to moment.

  • Looking for a drum loop app that will run in the background. What are you using?

    Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.

        That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
    If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • When trying to send a link off firefox via email the system looks for a g mail account that I do not have nor want to have. I've told the settings to use my outlook account but it keeps looking for g mail. how do i correct?

    when trying to send a link off firefox via email the system looks for a g mail account that I do not have nor want to have. I've told the settings to use my outlook account but it keeps looking for g mail. how do i correct?

    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • Looking for an online LR3 gallery that allows clients to give feedback.

    Tried FSS Select from LightroomGalleries but no luck (I only get an endless "loading gallery"). I just want something simple that would allow clients to provide feedback (comments/picks/ratings) on a series of photos I just took for them.
    Any suggestions?
    Thanks very much!

    Wonderful - thanks a lot for the suggestions.
    Paul
    Date: Thu, 17 Mar 2011 03:11:57 -0600
    From: [email protected]
    To: [email protected]
    Subject: Looking for an online LR3 gallery that allows clients to give feedback.
    http://theturninggate.net/galleries/html-galleries/ttg-client-response-gallery/
    >

  • Blocking cookies - I was told there was a cookie tab under Privacy with a choice for EXCEPTIONS - but 3.6.12 doesn't have it - how do I block a cookie that keeps coming back

    Blocking cookies -
    I was told there was a cookie tab under Privacy with a choice for EXCEPTIONS
    - but 3.6.12 doesn't have it
    - how do I block a cookie that keeps coming back
    using 3.6.12

    To see all the History and Cookie options, select: Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
    See:
    * [[Blocking cookies]]
    * [[Enabling and disabling cookies]]

  • In CS6 InDesign (8.0.1) I tried looking for Folio Overlays panel and it doesn't appear...

    In CS6 InDesign (8.0.1) I tried looking for Folio Overlays panel and it doesn't appear. So, I tried to go to Updates under Help menu but the Updates button is deactivated.
    Any ideas?

    Folio Overlays is available under the 'Window' Menu. If it is not available, download it manually, links are available in the following document: Digital Publishing Suite Help | Installing DPS tools

  • I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

    I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

    That's a very broad question and difficult to answer without knowing more about you requirements.
    Try starting on this page Category review: library management software for the Mac |Part I  and part II  to get a starting point.
    regards

  • Looking for an iPad 2 case that holds notepad.

    Hello,
    I am looking for an iPad 2 case that holds notepad. 
    But I would like it thin.  Not a big puffy leather case.
    anyone know of any?
    thanks

    Try this case (from the Apple Store - U.S.):
    http://store.apple.com/us/product/MD454LL/A/ipad-smart-case-polyurethane-dark-gr ay?fnode=3b
    ... and simply use the Notes app on your iPad to house your notes!

Maybe you are looking for

  • Error message in triggers

    i hav created a trigger which does not allow to delete rows on a particular day of the week. in the trigger body i hav given the raise_application_error with a user defined error number . now when somebody tries to delete a row on that day the the tr

  • Xorg config: Emulate3Buttons, EmulateWheel simulateneously

    Hi, I just got a Logitech Marble mouse and want to configure it so that simultaneously tapping the left and right main buttons emulates a middle click, and holding these buttons enters scrolling mode. What I have right now is Section "InputClass" Ide

  • Default the blank value for MessageChoice

    Hi, I have created a Message Choice Bean and I require to have a blank value as the first value followed by the original values. How to achieve this ? I have also tried setting through personalization 'Add Blank Value' to 'true' and also tried with t

  • Unsupported image format after merging aperture libraries

    I've experienced a large number of files with 'unsupported image format' after merging aperture libraries from separate external hard drives.  I did not have this problem in either library prior to merging them.  Can anyone advise how to rectify this

  • Maximum number of members in a dimension

    Hi, Is there a limitation of number of members in a dimension in Oracle Olap? Thanks, Krishna