S10-2 sees sd card but cannot read,format

I've already reloaded the drivers from the website here and tried different SD cards, mostly 2 gig and less. Windows Explorer sees the sd card as drive E: but when I access it, the system tells me the disk is not formatted, ( even though it was on another machine) would I like to format it now. So I say OK, but even then, I cannot access the SD card, add or read files. I wonder if I should just upgrade to win 7 to fix it.

Hi and welcome, did u use factory installed XP ? In normal working, you dont need a driver for cardreader itself driver is contained in XP with SP3 ... the named driver installs correct allocated icon & symbols...
in your case it seems the card-reader is defective ...call your local service... Dont try to format your cards ... In bad case ,that could be result you really have broken SD-Cards..
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

I redeemed a 100 gift card but cannot retrieve the balance

I redeemed a 100 gift card but cannot retrieve the balance

What do you mean " retrieve the balance"?

MacBook Pro sees wireless networks but cannot join any. Connection timeout error

I have a MacBook Pro here that sees all wireless networks but cannot join any. It gives a connection timeout error with every one.
Internet access via ethernet cable works just fine.

It's not uncommon for you to "see" a great many networks, dozens even, yet you not be able to connect to any of them even if they are "open" (no lock icon). There may be a number of reasons for that, such as they're too weak for a reliable connection, or the router may limit connections to only specified devices.
There is only one way to achieve a reliable network connection, and that's for you to connect to your own wireless router. Even that doesn't work if its signal is too weak or if there are many competing wireless networks in your area.
If it's your own AirPort Base Station you're trying to use but can't, the latter could be the reason. The only way to mitigate the effects of wireless interference is to use 802.11n and 5 GHz whenever practicable. Even today you may only find one or two 5 GHz networks being used in an otherwise "crowded" area.

MBP won't read SD card, but will read CF card with the same card reader

As the title says, I have a card reader that works great with a CF card, but the MBP won't recognize an SD card. This is a new problem for me. I also have an express card adapter for SD that won't read the card, either. I have tried 4 different SD cards, and these exact cards have worked for me in the recent past (within the past 2 months). They work fine in the camera. I also tried connecting the camera via usb, which was unsuccessful. I tried blowing air on the cards and the reader. I cannot get the cards to be read on my wife's macbook. This makes no sense to me, as it worked fine the last time I tried. I find it hard to believe that all cards are corrupt, or the cable is the problem because it reads the CF card.
Any help is greatly appreciated!

check if the SD Card is a SDHC card and if the card reader can read that. I know I have a friend who had this issue and in the end had to buy a new card.
Camera to MBP issue could be resolved by changing a setting on your camera. On my Nikon D300 I need to set the camera to MASS STORAGE in order for MBP to detect it like a drive.

I cabn get into AOL on Firefox, but cannot read my e-mails there. It hangs up "loading" when I try to open an e-mail.

== Issue
==
Firefox is having problems with certain web sites
== Description
==
I can get into AOL on Firefox, but cannot open e-mails. It "hangs" on loadfing an e-mail when I try to open one.
== URL of affected sites
==
http://www.aol.com
== Troubleshooting information
==
I just get a loading message with my wheel turning, but it just hangs and doesn't open.
== Firefox version
==
3.6.6
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6 GTB7.1 (.NET CLR 3.5.30729)
== Plugins installed
==
*-np-mswmp
*1.9.0042.0
*npdnu
*npdnupdater2
*Adobe PDF Plug-In For Firefox and Netscape
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Default Plug-in
*Provides additional functionality on Facebook. See our web site for details.
*Shockwave Flash 10.0 r22
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*GEPlugin
*4.0.50524.0
*Office Live Update v1.3
*Virtual Earth 3D 4.00090316005 plugin for Mozilla
*NPWLPG
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update

the settings program will not allow me to enter any of those cells. the accounts section is all in grey scale (not black) and none will open including "add account"

Adobe Acrobat 9 installed but cannot read any PDF file from a Browser window

I have a new(-ish) PC running Vista and had Adobe Acrobat v9 installed. However I cannot open PDF files when trying to view from a Browser on a web site. IE8, Firefox and Chrome all produce the same error that claims I need to install Adobe 8 or 9. Have searched "Manage add-ons" and found Adobe enabled. Have hunted around but cannot seem to find a way to fix this. Any ideas? This seems so fundamental that it is difficult to believe that (a) it happened in the first place and (b) that there is not an obvious way to fix it!

Are you on a PC with a profile setup?
Assuming you are,
Rename your profile to something like PROFILE.OLD and then relog into the PC. If the PDF's open without issue, you can remove the Abode folders in the old profile under Documents and Settings\%profile%\Application Data and Local Settings\Application Data.
Rename the new profile to yet something else like PROFILE.NEWOLD. Then rename your PROFILE.OLD to its original name. Confirm that you have removed the above folders from this existing profile. Perform MIGWIZ I.E. Export files and settings to a folder. Now rename the profiles so that the .NEWOLD is the active profile and run migwiz there - bringing in your old settings. These steps are only needed if you wish to preserve all the data and settings from your old profile.
Hope this helps!

Report Permissions -- Run existing reports but cannot read/create report

Hey everyone,
Hopefully this is a simple question. I'm trying to create a user in the RPD which has permission to run all the existing reports in a Shared folder and is able to change the filter criteria on those existing reports, however, the user cannot create any new reports or even view the subject areas.
I thought this would be a simple task, i.e. give user execute on the existing reports but no read permission on the subject areas, however, when I take away his read permission from the subject areas, he is unable to run the reports anymore.
Does anyone know how I can accomplish this?
Thanks in Advance!
-Joe

Joe,
I think you only need to give permission "Read" to the user/group.
Let me know if this helps.

Install Adobe Reader but cannot read PDF file

Hi all,
I am new and not familiar yet with forum so excuse me for a duplicate posting at
http://www.adobeforums.com/webx/.59b65e89/6
which is a thread "cannot install Adobe Reader". Since mine is a different problem, am transferring what I posted there into a new thread, which is as follows:
===============================
I cannot read PDF files with web browser so uninstalled and reinstalled with Adobe Reader 9
I still cannot read PDF file with web browser. After clicking on a link that is a link to a PDF file, I just get a blank page
Why and what can I do?

AOL used to have a lot of problems with PDFs, hope that has not returned. Anyway, the PDF was probably sent as a text file rather than encoded as a binary file. That would make it corrupt and is a problem on the senders end. Older versions of Outlook also had problems with PDFs that would cause a problem on your end.

I have a new mac air, updated the software, have downloaded Pages & Numbers but cannot read .wps documents received from friends.... wps docs are from Microsoft Works word processor.

I have a new Mac Air, updated the software, downloaded Pages & Numbers but cannot open .wps documents from friends. .wps is the format used by Microsoft Works word processor. Can anyone open .wps on Lion?

Only MsWorks opens .wps on the PC, what chance has Mac OSX got?
http://www.microsoft.com/download/en/details.aspx?id=12
To convert them to something readable.
Peter

Builtin rtl8723ae Realtek WLAN driver detect card but cannot set it up

Hello there,
I have been trying to make my new computer's wireless Realtek 8723AE card work under Linux over the two last days but it did not work though I tried a lot of things.
Brief
The rtl8723ae module is correctly started on boot and will recognize the wifi card as shown by dmesg and list it in availaible interfaces with lo and enp2s0 LAN card.
However I cannot set it up using either the `ip link set wlp1s0 up` (or `ifconfig wlp1s0 up`) ; doing so and running a `ip link show` after will still show it as `DOWN` and if we look in dmesg we can see a new line:
ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Due to this problem `wifi-menu` calls are unsuccessful because the card is not up. I bother if this is only an IPv6 error or if this is also meaning that the whole card is not ready, because I do not need IPv6 on WLAN networks so I can disable it if possible.
Tried hacks
wicd will not perfom better as default system network tools.
compiling the Realtek Linux modules from scratch and modprobing it does not help
Other random module options settings like `ips=0` but no improvement
Some of these hack where also tried on Ubuntu, but I quickly installed Arch over it in order to have a better driver testing environment (and I was suspecting that the kernel was too old but same problem on Arch so…).
Thank you a lot for any feedback! The wifi card is perfectly working on Windows 8 dual boot with Realtek drivers so this is not an hardware issue.
Last edited by MicroJoe (2015-03-04 21:13:15)

Hi and Welcome to the Forums!
My my...you did try many things. Sadly, I think that the only way to unravel all of this is with your carrier. They control the BIS accounts. I would not let them off the hook though:
rstem wrote:
She had called T-Mobile and they put her through hours on the phone and said it's A RIM problem, there's nothing we can do for you, you need to work with Blackberry.
While I'd never want to say that a carrier rep would lie to you, that statement from them is blatantly false. They sell you the BIS service. They are responsible for delivering that service to you. Only they can escalate your case into RIM if that is needed to resolve it. You have no free channel for accessing support from RIM except as escalation from your carrier.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can see shared CD drives on MBA, but cannot read any data from disks

Puzzling one here.
Have a MBA and am trying to use the shared drives on either a Windows XP computer, or MacBookPro notebook. Both computers are on the same wireless network, and both computers have DVD/CD sharing enabled.
In the RemoteDisk shortcut on the MBA, I can see both computers and their shared drives, and I can even see the title of the disks that are in the drives, however, I cannot see any of the data on the disks. It tells me 0MB at the bottom of the window.
The MBA has all updates installed, and I even tried to manually install the RemoteDisk/Sharing update from Apple.
I found this post, and tried the commands in Terminal, but that did not help: http://jasonevangelho.com/2008/11/02/how-to-really-enable-remote-disc-dvd-drive- sharing-non-air-macbook/
Any idea's?

Oh yeah, I forgot to say that the wireless router is a Time Capsule.

Superdrive can read and burn dvds but CANNOT read or burn CDs??

My DVR-107D can read and burn DVD's, but all of a sudden it cannot even read or mount a cd. It also cannot burn CD's. I've run 2 cleaning discs, and even manually cleaned the lens. I feel it may be a software issue at this point... Any ideas?? Finder is set to open CDs and DVDs to the desktop.

Hi
There are two lenses in the drive. It is possible for one to fail while the other still functions. I manually cleaning the lenses made no difference, it is quite possible that aspect of the drive is dead.
You may want to try from a different admin User account (and with a third party app such as Toast, in addition to Finder, iTunes, iPhoto, Disc Utility)

TS3276 can receive and send email on ipad and can send email from mac to ipad but cannot read emails on mac

mac was set up with email account. now i am unable to read my emails, tried sending test email from mac to ipad and it worked sent email from ipad to mac but did not register why? when it use to work up until tuesday. checked email sever settings and all seems to be the same as the ipad so seems ok

mac was set up with email account. now i am unable to read my emails, tried sending test email from mac to ipad and it worked sent email from ipad to mac but did not register why? when it use to work up until tuesday. checked email sever settings and all seems to be the same as the ipad so seems ok

I am a serviceman deployed to East Africa, and I bought an itunes gift card but cannot use it to purchase anything because itunes sends me to the billing page for a credit card but I only want to use the gift card, how do I get pass that?

Hello, deployed an want to use an itunes gift card after I put in the number to use it and purchase music itunes continues to take me back to the credit card billing page. I only want to use the gift card, how to I get pass the credit card billing page. Also as soon attempt to put in my new credit card number it immediately times out can this be associated to where I'm located?

Go to your account on your computer and set the credit card to none. This will allow you to use the gift card.

URGENT DSC: I can write to shared variables but CANNOT read them?

hello everyone,
I'm using DSC to communicate with a DELTA DVP28SV PLC. I managed writing to a coil to to turn a fan on, and I also wrote to a register.
However, when i tried to read the coil (same coil i just turned on) or when i tried to read a register that im very sure has values (the register where i configure the modbus parameters), it would return ZERO, even when i tried to read the register that i just wrote into the reply was zero (I am sure that writing to the register was successful because i made the specific value that i wrote to the register a condition to turning a light on).
So, anyone knows why this could happen?? the Registers are Read/Write. I thought it could be that the scan time in the PLC is too short so i added delays but anything i read still gives zero back. ideas? can anyone help me with this?
here's the PLCs application manual in case it matters : http://www.delta.com.tw/product/em/control/plc/download/manual/DVP-PLC-Program_O_EN_20120416.pdf
Solved!
Go to Solution.

here: capture.png shows the results i get
Attachments:
diagram.PNG ‏32 KB
Capture.PNG ‏10 KB

S10-2 sees sd card but cannot read,format

Similar Messages

Maybe you are looking for