S10-3 WIN XP Lan drivers dont work

i have  done clean install of WIN xp  and all the drivers i could find don't work on my S10-3 .  under windows 7 i had Brodcom 802 network Microsoft Virtual WiFi  and Realtec PCIe    i tried installing win7 drivers for eather LAN or WiFi  but its not working.  any help or can someone  provide me with direct drivers for XP  that i can copy to windows .

ok i got the LAN drivers  but still can not install Brodcom XP drivers on my s10-3

Similar Messages

  • NEED HELP! Reinstalled windows 7 on a windows 8.1 laptop drivers dont work!

    I need to find help quick please, because I use my computer all the time. Last Christmas 2014. I bought a new HP laptop. It came with windows 8.1, but I replaced the OS with windows 7 64 bits, because I really like this operating system. The problem is that the Network Driver is not installed and neither is the mouse driver or the usb driver. Everything else works fine, but I really need to find the controllers for my new operating system, and I cannot find them by searching in HP website. My computer is a Laptop Energy Star 14 u003la I really need some help, I know it is possible to find the controllers, but I dont know anywhere to search, and I really love Windows 7. Thanks 

    Thank's for reply!Unfortunately this forum dont notify me by e-mail about replys..but...i found a web site wete there is a letter from Toshiba were they say that drivers will be aviable on the begining of Decembar (i hope),the letter was as reply of a request of the two dvd one with Windows 7 another with the drivers+instrucionctios.
    I will wait i hope that will not be a long time.
    Thank's
    Helen

  • Hp 250 G3 vga drivers dont work & and camera software

    Hello there, I have a brand new HP 250 G3 with no Os. I have intalled the vga drivers but i dont think that they are compatitive with my device.Also when i try to open youcam software to open my webcamera it says  " you do not have compatible vga hardware or driver to  run youcam. Please any help with my vga drivers?I cant even play the stock card games of win7 cause of my vga. Celeron N2840 Thanks.

    You're very welcome. Unfortunately, I don't know what you need to do about that. I always thought all you needed was the graphics driver and cyberlink youcam software to work the webcam. The only suggestion I can offer would be to see if installing the HP Universal Camera driver gets the webcam to work. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_132495_1#tab1

  • Hp 250 G3 vga drivers dont work

    Hello, I have a brand new hp 250 G3 and it seems that the vga drivers are not compatible with my laptop. When i try to open youcam software it says "you do not have compatible vga hardware or driver to run Youcam"not even my camera works cause of that. i cant even play stock card games on win7 cause of the vga. Intel celeron N 2840. Any kind of help to sovle this; Thanks.

    You're very welcome. Unfortunately, I don't know what you need to do about that. I always thought all you needed was the graphics driver and cyberlink youcam software to work the webcam. The only suggestion I can offer would be to see if installing the HP Universal Camera driver gets the webcam to work. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_132495_1#tab1

  • Installed Vista 64 however boot camp drivers dont work - Help

    I have a Macbook Aluminum with 4 gb ram.
    I just installed vista 64 bit however - i can get Boot camp drivers to run.
    Please help someone.

    Mac OS X 10.5.4 DVD BootCamp included drivers
    http://support.apple.com/kb/HT1999
    Limited list of Macs that officially support 64-bit Vista
    http://support.apple.com/kb/HT1846
    What does happen when you insert your Leopard/OEM 10.5.x DVD?

  • KEYBOARD DONT WORK IN WIN 8.1

    I have a Qosmio x775-SP7102L, the keyboard dont work after i upgrade to win 8.1, the device manager have a CODE 19 error, 
    i try to find a driver for sp/2 standard keyboard for win 8.1
    please someone help!!!!!

    Microsoft suggests you :
    Uninstall and reinstall the driver
    Uninstall the driver from Device Manager and scan for new hardware to install the driver again.
    In the device's Properties dialog box, click the Driver tab, and then click Uninstall. Follow the instructions.
    Restart your computer.
    Open Device Manager, click Action, and then click Scan for hardware changes. Follow the instructions.
    Note You may be prompted to provide the path of the driver. Windows may have the driver built-in, or may still have the driver files installed from the last time that you set up the device. However, sometimes, it will open the New Hardware Wizard which may ask for the driver. If you are asked for the driver and you do not have it, you can try to download the latest driver from the hardware vendor’s website.
    Revert to the most recent successful registry configuration
    The Last Known Good Configuration feature is a recovery option that you can use to start your computer by using the most recent settings that worked. The Last Known Good Configuration feature restores all the registry information and driver settings that were in effect the last time that the computer started successfully.
    More info: http://support.microsoft.com/en-us/kb/310123#19

  • Amd video drivers not working after win 10 upgrade

    AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again.  Alienware here i come.

    Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad.  FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

  • SOLUTION: Get Win 7 Printer Drivers/HP Solution Center to Work on Windows 8

    Took me some time to figure it out, but I got it to work.
    First of all, the preliminaries:
    I have an HP dv9700t laptop running the 64-bit version of Windows 8 Pro RTM (not the preview, but I assume it will work on Preview as well).  My printer is an HP Photosmart C7280.  If you have a different printer, it is possible that something similar to how I solved my problem will help you, especially by running your installation files in Windows 7 Compatibility Mode.
    Windows 8 does come with stock C7280 printer drivers that work by going into Control Panel>Devices and Printers>Add A Printer, but there's only limited functionality with those.  As such, I wanted to run the HP installation files to have increased functionality.
    Unfortunately, when I ran the full installation file from HP for my printer, there was no "Install a Printer" button, or any of the other usual buttons.  There was only an "Exit" button.
    Here's how to get it to run and install properly.
    Right-click on the HP Full Installation file, then Properties>Compatibility>then check the box for "Run this program in compatibility mode for:", then select "Windows 7" in the dropdown box, then Click "OK".
    Run the installation file as you normally would in Windows 7.
    I tried this two ways.....the first while connected via USB cable.  It worked just fine with no errors.
    I also tried it with the printer connected to my network via WiFi.  Ran into some problems.
    The installation program would detect my printer just fine, and I clicked "Next" or "OK" or whatever the prompt was to install the printer.  The installation would hang on "Reply from SNMP" (or something similar) and it would list the IP address of my printer.  I waited, waited, waited for an hour, and it wouldn't get past this.  Not to worry.
    Proceed with normal installation until you get to the "Reply from SNMP" message and the installation stops responding.
    Enter the Task Manager with CTRL-ALT-DEL.  You'll see an entry in the "Apps" for the HP installation program....LEAVE THIS ALONE.
    Below the "Apps" list you will see the "Background Processes" list.  In this list is something along the lines of "HP Network UI", or something similar, consuming a significant amount of CPU.  Highlight this entry, then click, "End Task" at the bottom.
    The "SNMP" window will close and your installation program will then finish normally and your printer/fax/scanner will be properly installed.  HP Solution Center works normally, as does printing, scanning, etc.
    Will the next person who uses this give some feedback and also answer some questions for me so I can update this post with more specific information?
    Please let me know what the exact "SNMP" message is when the installation hangs.  Please also let me know the exact name of the "HP Network UI" background process is, as well as the HP Installation app name.
    Hopefully this will help you.
    This question was solved.
    View Solution.

    thanks for the solution. I have an HP Photosmart D110a wireless printer. Windows 8 installed a generic printer driver that worked fine for printing but I lost all functionality to the scanner of the device. 
    I tried to follow your instructions. I do get an error at some point when the software installer tries to talk to the printer and it gives an error message. It finds the printer OK but stalls. The error message is different and merely reports that there is a problem, no further details. There is indeed a background task "HP Network UI" or similar but ending this task doesn't do anything on my system. The Network UI task ends and the error message stays open. I ended a couple more background tasks but it would not go anywhere.
    I then uninstalled the entire package, unplugged the printer, turned its wireless feature off and reinstalled the software in Windows 7 compatibility mode. When it asked to plug in the printer to the USB it finds it right away, the installation continues and is almost finished when it stalls again. This time it reports that it has a problem again and needs to uninstall. Still with the error message and installer open I open the installed "Solution Center" and I can find the printer fine (it actually lists two devices, one being grayed out). It initially gave me an error message when I tried to scan something, but ignored the error. Eventually the scanner worked as intended. I force ended all installer tasks in the task manager and the Solution Center works fine and does all tasks it did under Windows 7, now in Windows 8. 
    thanks again for the post

  • Onboard Mac Lan no longer works after 1.9 update!!!

    I was using bios v1.8 and both my Mac Lan and my Giga Lan were working perfectly fine. Now that i updated to v1.9 my Mac Lan no longer works but my Giga is fine!!! 
    My Mac Lan still gets an ip address from my router, but i cannot ping the router nor anyone else on the network and my internet does not work!! So right now im using my Giga lan but i want my other one working like it was.
    I tried going BACK to v1.8 but it did not fix the problem, so i went back yet again to v1.9 and im still left with the same problem.  Ive tired disabling it and re-enabling it in both the bios and in windows and still nothing. Ive also tried re-installing the drivers and that did not work either. I even ran a Winsock Fix but that didn't fix the problem either.
    Is anyone else having this problem besides me? what can i do to fix it???

    Download new bios and extract it to a directory where you can find it (root of c:\ if you are lazy like me).  Run wminfo if you are paranoid about losing your mac address and copy it down for your nvidia adapter.
    Restart windows in safe mode.  Close every application down in task manager. 
    Run winflash as described below and CHECK ALL THE RIGHT BOXES TO UPDATE BOOTBLOCK AND TO CLEAR THY CMOS.  Read Syar's description below as that is what I used:
    Quote from: syar2003 on 30-July-05, 00:24:48
    No , floppy flash is not neccesary !
    Can use
    C:\Program Files\MSI\Live Update 3\FlashUty\Award
    winflash.exe
    Place checkmarks on bootblock/dmi area/update all/clear cmos
    During flashing you see it will verify the programming of the bios chip .
    And the good thing is unlike dos flash you can redo it if it fails , just by starting taskmanager and kill winflash.exe
    and start over (as long as the machine isn't powered down or restarted).
    I always say no after the flashing when asked to restart , exit the winflash utility , make a normal shutdown , turn off PSU for 10 seconds , then turn back
    on , enter bios and load optimized default , followed by a boot to build/update dmi pool .
    Kill all unwanted apps in the systemtray before running winflash and dont have any other applications running .
    Best way is to boot to windows safemode .

  • HS-1200 volume buttons dont work...

    I bought HS-1200 headphones and i cant use volume buttons on right side of headset. I installed and uninstalled drivers few times, downloading drivers from creative.com site and it still dont work. I even try dont to install anything but it wasnt help. Im fed up with this problem... Buttons for turning on headset and for starting/ending call work with and without drivers. I dont know where is the problem. I try to install drivers for my sound card (realtek) and it wasnt help too. When im looking in Creative console it seems like the program use my headphones like speakers. I dont have headphones options i saw in FAQ. I want to show you screenshot http://img693.imageshack.us/img693/3676/problem.png I guess that i should have a sign from blue circle instead of symbol from red circle. I selecting my earphones and its still dont change. And i dont know what about sign from green circle. I dont have it - maybe it will solve the problem? I have Win XP Professional SP3. Please help me with this... Sorry for my low english

    Hmm... I luckly solved this problem. My headset after about 2 months broke down. It won't play or record anything. It charged for ages and never finish. I send it on guaranty back and get new one. Before i had Win XP and buttons won't work. Before i get new headset i update to Win 7. After pluging them in and install CD all works properly. Maybe they are not compatible with XP... >.<

  • U330 Windows 7 Drivers Not Working

    Hello,
    I have recently been in the process of updating all of my drivers on my u330-2267EU to the latest Windows 7 versions. I had been waiting for this update to the drivers site for some time since I was able to get Windows 7 installed before the Oct 22nd release. I am running Windows 7 64bit and I am running into some trouble with these newest drivers not working correctly.
    u330 Driver Download Site (Using Win 7 64bit Versions): http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
    Switchable Graphics: there are 2 new Windows 7 drivers related to video that I downloaded. One referring to the discrete ATI graphics card, and the other to the Intel Graphics Media Accelerator. After installing both of these, setting BIOS for Switchable Graphics, and running the Switchable Graphics program from the desktop after bootup, brings up the desired menu with the option to switch from power saving gpu to the high performance gpu. When I click the "high performance gpu" button, the screen flickers and fades to black momentarily as it should, but when the screen returns and after waiting for a few minutes no switch is made, it just stays in the powersaving gpu. Suggestions?
    Power Management Software: I also downloaded Lenovo's Energy Management Windows 7 driver for the u330. After installing the software I was initially able to bring up the menu to change power options, but the options that I chose would not make any apparent changes. Actually, after installing the program, it made my screen incapable of changing its brightness using the "function + arrow" button combination. Also, no longer when i change my default power windows power options will it adjust my screen brightness. It just stays the same no matter what. The only way that I can now change the brightness of my screen is by going into the graphics settings of the Intel GMA and change the settings there, but that is a completely horrible way of having to do that.
    So there you have it, after all this waiting I still dont have the ability to utilize the switchable graphics nor properly use the Lenovo Power Management software. Oh yea, and I still cant adjust the brightness of my screen. I have re-downloaded and re-installed these drivers many times to try to get them to work correctly, but so far no luck.
    I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo has noticed these problems and a fix is coming soon
    thanks!
    Solved!
    Go to Solution.

    check out our thread here
    http://forums.lenovo.com/t5/Windows-7-Launch/U330-Windows-7-Drivers-Problem-amp-Solutions/td-p/16716...

  • Win XP 64 drivers for Satellite A305-S685

    Hi there,
    i bought a labtop A305-S685, which is 64 bit.
    I installed Win xp 32bit but its much slower so i got Win XP 64bit for better performance but i didn't find any driver for XP 64
    on Toshiba site..........
    Can anybody help me?

    The Windows XP 64bit drivers dont exist and I doubt they will be available in the future. The point is that the XP 64bit is not so popular like Win XP32bit and most 3rd party applications dont work on this OS.
    Now the Vista is future or until Windows 7 will be released :D and I think you will get only the Vista 64bit drivers for this unit.
    Maybe you can collect some single Win XP 64bit drivers from any 3rd party websites.
    This would be your last chance.

  • Dont work driver on Scanner ScanJet 300 on winows 7

    Please, create new drivers for Scanner ScanJet 300 on Windows 7 platform. I have this divace. Dont work it on Windows 7. Windows 7 and drivers of ScanJet 300 scanner are not complianted.

    Hi @Per-Morten 
    I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP Scanjet 5400c Scanner Drivers page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Hp dv7-1245dx media smart button dont work

    hi, i have a hp pavilion dv7-1245dx, i format de drive c and install the windows vista 64 in spanish because im in argentina, but before search and install all drivers,my media smart quik lunch button dont't work, I intall all drivers from the hp web, then the media smart button work bad because y install the dvd play and when I push the buttom sound like i push 2 twise and open the dvd play no the mediasmart menu, then i unistall the dvd play, the media samart work good from the computer icon but to the button dont work, sound like two twise again but dont open nothing, y don't know what to do? I unistall and install again all quik lunch buttons and finger print drivers.help me plase, and another thin. when i format i lost the webcam software i would like someone help me to recober it .  
    thanks
    PD: sorry for the write erros I from argentina I dont speek english very well.
    Message Edited by nachodv7-1245dx on 07-25-2009 10:44 AM

    I have the exact same problem.  I noticed this started after some windows update just prior to upgrading to Windows 7.  And then it got worse after the upgrade. 
    I'm having to go into the task manager and end the smartmenu.exe application just to stop the nagging volume bar across the middle of the screen and just to use the computer, but the Volume still jumps around rapidly.
    Please, HP read this and help.
    Robert S. Rodriguez Jr.
    Robert S. Rodriguez Jr.

  • L7555 - Cannot install Win 8.1 drivers

    I really need to print something and the old Win8 drivers will not work so I uninstalled everything and am trying it install the new Win 8.1 drivers.  I must be insane because I am trying to do the exact same thing expecting different results.  What is the deal here?  I am tired of seeing this message and I really need my printer 60 minutes ago!!!!!!!
    "The system cannot find the file specified"
    The printer is recognized on the network and I can open the properties via a web browser using the IP address.  When I click the install button on the installation software all I get is the above message.
    Thanks,
    Bill

    Hi midas001
    Sorry this is so frustrating.
    Was there not a  uninstall_L3 listed either?
    We could have ran it.
    This url  is a scrubber to remove old printer files. It will work for your product also.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109453-
    2&cc=us&dlc=en&lc=en&os=4132&product=3752459&sw_lang=\
    If the scrubber doesn't work then follow Step two: Remove any installed HP software from this url.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01841185#N461
    This url is for uninstalling a program.
    http://www.wikihow.com/Uninstall-a-Program-in-Windows-8
    Then download, save and then run the downloaded drivers from url below. Just put in the operating system and click the next button.
    http://www8.hp.com/us/en/drivers.html
    Let me know if this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for