S10 screen stuck on "factory test" mode after replacing ribbon
After replacing the LCD ribbon on my S10 netbook (with one the exact same) it seems to be stuck on some "factory test" mode. It flickers between solid red, green, and blue and also some gradients and other patterns.
I'm still able to use my netbook using an external monitor.
I don't want to use OneKey because 1) I'm not certain it'd fix it + 2) there's a broken ext3 partition that I need to recover files from. If it's the only way to do a reset (don't know) then so be it.
Thanks for any help!
I should mention that when I boot to Windows XP and select "Notebook" from the graphics output options, the notebook screen goes back to displaying the test patterns. Otherwise it's off when the external monitor is plugged in.
Similar Messages
-
Screen stuck in "Plug In" mode after download?
When downloading the new software for iPhone I received an error message reading that the download was unsuccessful and now my phone is stuck in the screen that shows "Plug into iTunes" .... can anyone help? Ive done everything from trying different ports to restarting computer to reinstalling iTunes....Thanks
Unfortunately the internal drive has malfunctioned. If you can't restore from a Time Machine backup in Recovery mode, there is probably nothing else you can do. You could try to reinstall OS X and then transfer your data in Setup Assistant, but that's a 5 GB download and is not likely to happen unless you have satellite Internet, and maybe not even then.
-
My iPhone 4 is stuck in the recovery mode after downloading iOS7. iTunes screen reads "Waiting for iPhone". It's been waiting for two days. Can anyone help?
Hi Imw7996,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Judy -
iphone5 went in recovery mode after replacing power button, everything went well in the repair ,I try to restore but it quits in the middle of the process and go back to i tunes logo please help I been without my phone for a week.
Hi
did you get any reply?
I have the same problem I dont know what to do..
Regards -
I was listening to my ipod, with half the battery life left, when suddenly, it says no battery power remains and it shuts down. I tried to start it up again and accidentally pushed a couple buttons at once. Now it's stuck in some weird test mode that I can't get it out of. Here's what the screen says:
DISKMODE
WHEEL
CONTRAST
AUDIO
STATUS
DRV TEMP
IRAM TEST
how do i fix this?Hold Menu and Select for 6 seconds or more and your iPod should Reset and be fine.
-
Entered test mode on dv6 pavilion win 7 x64 - cannot exit test mode after many attempts.
DV6 Pa,vilion laptop running win 7 x64 has experienced 301 imminent disk failure msg without any apparent real issues for past several days. System is only a year old. Entered Test Mode as part of diagnostic effort. Now, regardless of boot option select cannot exit Test Mode. Any resolution?????
Windows7 Recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&tmp_task=solveCategory&cc=us&dlc=en&lc...
If you didn't do so and now can't> create Recovery Disks you can order from HP for a small fee. You will need serial number to order> Guide to Finding System Info
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
My iPod is stuck in ACCESSORIZE TEST Mode help pleaseeeeeeee
I went to reun diagnostics, unclicked the first 2 and this was the result
Re: iTunes wont sync my iPod Classic 80 GB
Posted: Mar 27, 2010 10:02 AM in response to: b noir Reply Email
could you please respond to [email protected] also in that i read that Email daily? PLEASE?
Thank you so much
this is what tghe test results were. can you please help? it is frozen on
ACCESSORIZE TEST
please plug fw
LCD ID : 2
FWPWR : 0
i did the run diag. nest next next next this is what it said
also redid run diag again did next and next only twice. in brackets it is what it said
red dot only on {iTunes helper is not working }
and the 2nd bunch was green except for the red dot on...no iPod or iPhone found}
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Gateway T5062
iTunes 8.2.1.6
QuickTime 7.6.4
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 77A954A4AC937069
Current user is not an administrator.
The current local date and time is 2010-03-27 12:55:08.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 6150SE nForce 430
External Plug-ins Information **
No external plug-ins installed.
iPod/iPhone Connectivity Tests **
iPodService 8.2.1.6 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
Serial Number: 8K6182HZSZA
iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
pc win vistahave you tried restarting the iPod? hit menu and the center button together until the screen turns off.
-
2009 i7 iMac Screen Stuck at Black during and after Startup
Have had this iMac since early March 2010, its been great and my favorite apple product to date. 4 Weeks ago I left to Europe and left my computer OFF and with the power cord not plugged into the wall. I came back, plugged it all back in and turned it on...everything worked fine, surfing the net and CS:S i leave again last week to Denver and left the computer in the same way, OFF and unplugged. I came back today turned it on, i hear the fans, I hear the computer starting up, my external hdd gets power but my logitech mouse would not get power through USB. Ten minutes later my screen is still black, no flickering no nothing just black. I then went ahead and turned it off via power button and disconnected all peripherals mentioned earlier and still nothing. Called applecare they made me do some power cycle thing and still nothing, now I have a Genius appointment tomorrow afternoon....any ideas? Could the screen just have died or some connection on the board burned out? Thanks in advanced!
Message was edited by: aphxtwininHI and welcome to Apple Discussions...
Try Resetting the PRAM
If that doesn't make a difference, try Resetting the SMC
iMac since early March 2010
Should still be under the one year limited warranty.
Carolyn -
Stuck in osx utility mode after intalling maverick
I ran an update to install Maverick, shut down, then when I restarted, I was forced to the OS X Utility menu, and nothing I do gets me out of it. I have multiple Time Machine backups, but they never actually restart the machine, it just goes right back to the utility menu.
I'm currently volunteering in the middle of the Serengeti in Tanzania, so taking it to the Genius Bar is not an option. Can anyone help?
Many thanks in advance!!
Cheers,
JenniferUnfortunately the internal drive has malfunctioned. If you can't restore from a Time Machine backup in Recovery mode, there is probably nothing else you can do. You could try to reinstall OS X and then transfer your data in Setup Assistant, but that's a 5 GB download and is not likely to happen unless you have satellite Internet, and maybe not even then.
-
Why am I stuck in single app mode after upgrading to Lion?
I completed the upgrade to Lion (10.7.1) painlessly on my Mac Pro, but now when I switch to any application, either by clicking or using Command-Tab, it acts as though I have selected "Hide Others" from the application menu and hides all other open applications. I can't find any way to turn off this behavior. It's driving me crazy because I have a 27" monitor and want to have my mail and IM client visible at all times. Has anyone seen this before?
Hi Canes,
Sorry - not sure what you mean?
GB -
My Lenovo s10 is Stuck on Startup Screen
Hey Guys,
My computer s10 is stuck on lenovo boot sceen after a factory restore. After the full restore i had the screen for choosing language etc and after that my laptop resart alone and stuck on the screen .... Tried rebooting, took out the battery, tried it pluged in, unpluged and it keeps stopping at the startup screen. I pressed all the key f12 etc but nothung happenning Any suggestions?
I tryed to call the support but they tolded me that they can help me because my computer is out of waranty.
see ya@skippy75015...
HMM: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-71062
Hope this helps.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee. -
Apps are stuck in an "installing" mode
I have several apps stuck in the "installing mode" after a recent attempted update. It is very strange because these apps are
not visible on my homescreen - so I cannot delete and reinstall. I can only see them in the purchased apps category within the APP STORE. They
function button/box is greyed and has the letters INST visible. Almost like you would see while an app is installing - this has been the case for over
three weeks. Does anyone know how to abort this function or somehow refresh so that the installation update is completed. The main app i care
about is the Amazon Instant Video App. Others include Nintendo Gamer and Pop Sugar.... not sure if there is any kind of connection....You can try any or all of these suggestions. They have worked for other users in the past, but YMMV. Just ignore anything that you have already tried unsuccessfully.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
Run in test mode call transaction
I have written a bdc program using call transaction method. I am giving the option in the
selection screen like run in test mode.so i want to display the error mess
without actually updating the tables,
if there is a way to do this
please tell me how to run in test mode.
thank you so much for all the replies.have written a bdc program using call transaction method. I am giving the option in the
selection screen like run in test mode.so i want to display the error mess
without actually updating the tables,
if there is a way to do this
please tell me how to run in test mode.
thank you so much for all the replies.
Hi
it is not possible, once u run call tranation the data is updated in table.
for ur requirement, put the option in test mode in selection screen, in this mode flat file data check with master data (flat file validations
) , if any errors it disaly errors in a report.
i provide some code, this is for fb60 check this code
FORM validate *
FORM validate.
delete t_record index 1.
loop at t_record.
delete t_record where accnt = ' '.
translate t_record-bukrs to upper case.
translate t_record-accnt to upper case.
translate t_record-waers to upper case.
translate t_record-xblnr to upper case.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_record-accnt
IMPORTING
OUTPUT = t_record-accnt.
move-corresponding t_record to n_record.
append n_record.
clear n_record.
endloop.
loop at t_record.
clear flag.
delete t_record where accnt = ' '.
vendor and company code checking.
translate t_record-accnt to upper case.
translate t_record-bukrs to upper case.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_record-accnt
IMPORTING
OUTPUT = t_record-accnt.
select single * from lfb1 where bukrs = t_record-bukrs
and lifnr = t_record-accnt.
if sy-subrc <> 0.
flag = 'X'.
error_record-rowno = sy-tabix + 1.
move-corresponding t_record to error_record.
error_record-text1 = 'The Vendor not Under this company Code'.
endif.
With holding liability.
select single * from lfbw where bukrs = t_record-bukrs
and lifnr = t_record-accnt
and WT_SUBJCT = 'X'.
if sy-subrc <> 0.
flag = 'X'.
error_record-rowno = sy-tabix + 1.
move-corresponding t_record to error_record.
error_record-text2 = 'The Vendor doesnt have Withholding Tax Liability'.
endif.
G/L account check with company code*
select single * from skb1 where bukrs = t_record-bukrs
and saknr = t_record-hkont.
if sy-subrc <> 0.
flag = 'X'.
error_record-rowno = sy-tabix + 1.
move-corresponding t_record to error_record.
error_record-text3 = 'The G/L acc not under the given company code'.
endif.
*cost centre checking
this FM for leading zeros
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_record-kostl
IMPORTING
OUTPUT = v_kostl.
select single kostl from csks into v_kostl where bukrs = t_record-bukrs
and kostl = v_kostl.
if sy-subrc <> 0.
flag = 'X'.
error_record-rowno = sy-tabix + 1.
move-corresponding t_record to error_record.
error_record-text4 = 'The costcentre not under the given company code'.
endif.
it check the invioce alredy posted or not.
translate t_record-waers to upper case.
translate t_record-xblnr to upper case.
select single belnr into v_belnr1 from bsip where bukrs = t_record-bukrs
and lifnr = t_record-accnt
and waers = t_record-waers
and bldat = p_invdat
and xblnr = t_record-xblnr.
if sy-subrc = 0.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
error_record-rowno = sy-tabix + 1.
move-corresponding t_record to error_record.
concatenate 'This document under number' v_belnr1 'already posted on '
date1 into fld2 separated by space.
error_record-text5 = fld2.
flag = 'X'.
endif.
*zero balance
on change of t_record-accnt or t_record-xblnr.
amount = 0.
totalamount = 0.
amount = t_record-wrbtr1.
loop at n_record where bukrs = t_record-bukrs
and accnt = t_record-accnt
and xblnr = t_record-xblnr
and wrbtr1 = t_record-wrbtr1
and waers = t_record-waers.
totalamount = totalamount + n_record-wrbtr2.
endloop.
endon.
if amount ne totalamount.
error_record-rowno = sy-tabix + 1.
move-corresponding t_record to error_record.
error_record-text6 = 'Posting only possible with zero balance'.
flag = 'X'.
endif.
if flag = 'X'.
error_record-flag = 'X'.
append error_record.
endif.
if flag <> 'X'.
move-corresponding t_record to f_record.
append f_record.
endif.
clear f_record.
clear error_record.
endloop.
endform.
*& Form Table Control
FORM head_item .
clear t_record.
LOOP AT t_record.
delete t_record where accnt = ' '.
translate t_record-bukrs to upper case.
translate t_record-accnt to upper case.
translate t_record-waers to upper case.
translate t_record-xblnr to upper case.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_record-accnt
IMPORTING
OUTPUT = t_record-accnt.
on change of t_record-accnt or t_record-xblnr or t_record-wrbtr1.
MOVE-CORRESPONDING t_record TO t_head.
APPEND t_head.
endon.
MOVE-CORRESPONDING t_record TO t_item.
APPEND t_item.
clear : t_item,t_head.
ENDLOOP.
ENDFORM.
form disperrortestrun.
loop at error_record.
format color 2 intensified on.
set left scroll-boundary column 70.
write : /'|',
(6) error_record-rowno, '|' no-gap,
(14) error_record-bukrs, '|' no-gap,
(12) error_record-accnt, '|' no-gap,
(16) error_record-xblnr, '|' no-gap,
(16) error_record-wrbtr1, '|' no-gap,
(8) error_record-waers, '|' no-gap,
(13) error_record-secco, '|' no-gap,
(20) error_record-sgtxt, '|' no-gap,
(14) error_record-hkont, '|' no-gap,
(15) error_record-wrbtr2, '|' no-gap,
(10) error_record-mwskz, '|' no-gap,
(20) error_record-gsber, '|' no-gap,
(12) error_record-kostl, '|' no-gap,
(5) error_record-flag, '|' no-gap,
(50) error_record-text1, '|' no-gap,
(53) error_record-text2, '|' no-gap,
(50) error_record-text3, '|' no-gap,
(50) error_record-text4, '|' no-gap,
(67) error_record-text5, '|' no-gap,
(45) error_record-text6, '|' .
endloop.
uline at /1(538).
format color off.
endform.
Report Header for Test Run *
form header.
set left scroll-boundary column 70.
format color 5 .
write: 'REPORT :', sy-repid,
38 'ERROR RECORDS DETAILS OF TEST RUN OF FB60(VENDOR INVIOCE POSTING)'
,123 'DATE :', sy-datum .
format color off.
skip 3.
format color 1 intensified on.
uline at 1(538).
write : /'|',
(6) 'Row No', '|' no-gap,
(14) 'Company Code', '|' no-gap,
(12) 'Vendor No', '|' no-gap,
(16) 'Reference', '|' no-gap,
(16) 'Invioce Amount', '|' no-gap,
(8) 'Currency', '|' no-gap,
(13) 'Section Code', '|' no-gap,
(20) 'text', '|' no-gap,
(14) 'G/L Account', '|' no-gap,
(15) 'Item Amount', '|' no-gap,
(10) 'Tax Code', '|' no-gap,
(20) 'Business Area', '|' no-gap,
(12) 'Cost Centre', '|' no-gap,
(5) 'Error record Status', '|' no-gap,
(50) 'Company Code/Vendor', '|' no-gap,
(53) 'Vendor/With holding tax Liability', '|' no-gap,
(50) 'Company Code/ G/L Account', '|' no-gap,
(50) 'Company Code / Cost Centre', '|' no-gap,
(67) 'Invioce Status', '|' no-gap,
(45) 'Invalid Balance',
'|'.
uline at /1(538).
format color off.
endform.
thanks
sitaram. -
hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.
-
IPhone 5 stuck in portrait mode after upgrade to iOS 8
iPhone 5 stuck in portrait mode after upgrade to iOS 8.
Phone was fine before the upgrade, iOS 8.1 did not fix the issue.
Have done a factory reset at Genius bar and they say it's a hardware issue and have gotten this response below:
"Now, when you perform an update to any iOS device many system checks are run to verify that all components are working as they should. This is part of the firmware update process. When these checks are run sometimes issues are detected, even if all seemed to be running well previously. When this happens one of two things can occur. Either the hardware will be deactivated completely, or it will be locked in a state of use so that the device can still be used. In the case of the gyroscope for screen rotation, the firmware locks in place so that while not perfect, the device can still remain on some functioning level. This is what appears to have happened when you updated. The software itself did not cause any failure, but it detected a currently upcoming issue and prevented it from becoming worse."
All I want is a replacement but they want me to pay £199 since it's out of warranty.
Anyone have the same issue?If the device is out of warranty you must pay the out of warranty replacement fee to have your iPhone replaced. If the phone was still under warranty the phone would have been replaced at no charge.
Maybe you are looking for
-
Hello, I have a problem with two of my servers. I have ~200 servers which are updating fine through WSUS. The settings are as you can see "3 - Auto download and notify for install" in the GPO. This is the correct setting. I want to achieve that I can
-
I have just about given up on flash forms. I have read just about every thread in this Forum, but cannot find the answer. Have worked with flash forms in the past, but after recently upgraded to a new box with Vista Business and Codl Fusion 8 Dev Edi
-
Changes in customer master data
Hi Is there a different way (apart from using IDOCS) to identify changes (create/update/delete) in customer's master data to the following Condition Class: BPAR TESTRF DEBI KLIM Best Regards Tal
-
So, about 3 weeks ago, I discovered this plug-in and really enjoyed it: Automate--->Photosmart Pro print Well, this week I must have done something, and I need to figure out how to fix it. I've tried uninstalling and reinstalling everything but Photo
-
Adobe Reader could not open 'f1065sk1.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). This is the error message I keep getting wh