S10u 7 - smpatch in BE fails - patchadd: /dev/null: cannot create

Solaris 10 5/09 s10x_u7wos_08 X86 with ZFS Root + Zones
smpatch on non active BE with Zones fails:
# smpatch update -b s10x_u7wos_08p1
Ckecking the currently running boot enviornment ...
Currently running boot enviornment name is [s10x_u7wos_08p].
Checking the destination boot environment [s10x_u7wos_08p1] ...
Installing patches from /var/sadm/spool...
Copying the currently running BE into inactive BE [s10x_u7wos_08p1] ...
(This process will take some time, please wait a moment.)
Installing update(s) onto the inactive boot environment [s10x_u7wos_08p1] ...
Failed to install patch 119901-07.
Utility used to install the update failed with exit code 1.
System has findroot enabled GRUBNo entry for BE <s10x_u7wos_08p1> in GRUB menuValidating the contents of the media </var/sadm/spool/119901-07.jar.dir>.The media contains
1 software patches that can be added.All 1 patches will be added because you did not specify any specific patches to add.Mounting the BE <s10x_u7wos_08p1>.Adding patche
s to the BE <s10x_u7wos_08p1>.Validating patches...Loading patches installed on the system...Done!Loading patches requested to install.Done!Checking patches that you spe
cified for installation.Done!Approved patches will be installed in this order:119901-07 Preparing checklist for non-global zone check...Checking non-global zones...This
patch passes the non-global zone check.119901-07 Summary for zones:Zone master-templateRejected patches:None.Patches that passed the dependency check:119901-07 Zone mast
er-template-cloneRejected patches:None.Patches that passed the dependency check:119901-07 Patching global zoneAdding patches...Checking installed patches...Verifying suf
ficient filesystem capacity (dry run method)...Installing patch packages...Patch 119901-07 has been successfully installed.See /a/var/sadm/patch/119901-07/log for detail
sPatch packages installed: SUNWPython SUNWTiff SUNWTiff-devel SUNWgnome-img-viewer-shareDone!Patching non-global zones...Patching zone master-templateAdding patches.
..Checking installed patches...Patchadd is terminating.Done!Unmounting the BE <s10x_u7wos_08p1>.The patch add to the BE <s10x_u7wos_08p1> failed (with result code <8>).
/usr/lib/patch/patchadd[4]: /dev/null: cannot create/usr/lib/patch/patchadd[6]: /dev/null: cannot createsort: insufficient available file descriptorsPatch 119901-07 fail
ed in non-global zone SUNWlu-master-template.Patch 119901-07 wasn't installed in zones:master-template-clone
Failed to install patch 119901-07.
ALERT: Failed to install patch 119901-07.
Any ideas?
TIA.
/phs
Peter H. Seybold

Post your question in the Developer Forums:
http://discussions.apple.com/category.jspa?categoryID=164

Similar Messages

Background Jobs are failing in DEV server after SP upgrade

Hi Everyone,
Below jobs are being failed in dev server after SP upgrade with error variant does not exist.
SWWERRE, SWWDHEX, SWWCOND, SWWCLEAR,SWFSLSDLEX, NON SAP USER UPLOAD
System Details:
SAP Version: ECC 6.0
Database: SQL 2005
OS: Windows 2003, SR2, 64 - bit.
Kernel Patch: 221
SAP_BASIS:19
SAP_ABA :19
SAP_APPL : 16
SAP_AP :17
SAP_HR : 51
SAP_BW : 21
PI_BASIS 2006_1_700 : patch 009
ST_PI: ST_PI 2005_1_700 : 006
FINBASIS : 16
LOSFE: 16
Can any one have idea on above mentioned jobs.
Thanks & Regards,
Vinod

> Below jobs are being failed in dev server after SP upgrade with error variant does not exist.
> SWWERRE, SWWDHEX, SWWCOND, SWWCLEAR,SWFSLSDLEX,
Those are workflow related jobs.
> NON SAP USER UPLOAD
This is a job name and not the program name.
Markus

Failed mount /dev/mapper/oradata

Hello experts!
After reboot OS failed mount /dev/mapper/oradata
OS: SUSE 10 sp4 ppc64
SAN: DS5300
My steps how i add the LUN:
1) rescan-scsi-bus.sh
2) vi /etc/multipath.conf
defaults
user_friendly_names no
multipaths {
multipath {
wwid 3600a0b80006e6a66000040a95066a18b
alias oradata
3) fdisk /dev/dm-2
4) echo 'add' > /sys/block/dm-2/uevent
5) /sbin/mkfs.reiserfs /dev/dm-2
6) mkdir /oradata
7) vi /etc/fstab
/dev/mapper/oradata /oradata reiserfs acl,user_xattr 1 2
8) mount a
C01-OraDB-02:~ # multipath -ll
oradata (3600a0b80006e6a66000040a95066a18b) dm-2 IBM,1818 FAStT
[size=100G][features=0][hwhandler=0]
\_ round-robin 0 [prio=0][enabled]
\_ 2:0:1:0 sdf 8:80 [failed][faulty]
\_ round-robin 0 [prio=1][active]
\_ 2:0:0:0 sde 8:64 [active][ready]
\_ round-robin 0 [prio=0][enabled]
\_ 1:0:1:0 sdd 8:48 [failed][faulty]
\_ round-robin 0 [prio=1][enabled]
\_ 1:0:0:0 sdc 8:32 [active][ready]
In logs /var/log/messages
end_request: I/O error, dev sdd, sector 0
end_request: I/O error, dev sdf, sector 0
end_request: I/O error, dev sdd, sector 0
end_request: I/O error, dev sdf, sector 0
end_request: I/O error, dev sdd, sector 0
end_request: I/O error, dev sdf, sector 0
end_request: I/O error, dev sdd, sector 0

ostapv,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Auto Partion fails error = /dev/sda is mounted

I booted from the cd, ran /arch/setup then began going through the setup program
at the point it is going to auto partition my harddrive it fails with /dev/sda is mounted or busy.
I checked /mnt and its not showing anything mounted.
32M for boot
512M for swap
7500 for / and home

Correct me if I'm wrong...I'm stuck at work on a *cough* winbloze machine.
rw=read/write
auto=mount when it boots up
user=users can mount/unmount
sync=write data to the drive immediatly when saved. async writes the data whenever it gets good and ready.
0 0 means the drive will never be force checked.
Or at least one of the 0's does. can't remember for the life of me what the other means.

OS X 10.8.4 wifi says "connection failed", but connects anyway; cannot save password

I am using OS X 10.8.4 that came with my MBP. When I connect to my home wifi that requires a WPA 2 password, it says "Connection Failed", but anyway connects to the internet. Also, my password is not being saved, and I need to enter it everytime.
After reading several forums, I have already tried the following:
1. removing airport preference list from Library/Preferences/SystemConfiguration
2. Removing network password from the keychain
3. Using Keychain first aid
4. Using disk utility and doing repair disk.
5. Doing DHCP release in Network Preferences.
6. Removing my network from the preferred network list and connecting again.
I am using a D-link modem. It should not be a problem, because the same MBP could remember the password before. The problem happened when I tried to fix my wifi because it would take long to connect after waking from sleep, when I deleted the airport preferences list, and removed the keyring.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

[SOLVED]C compiler cannot create executables DUE TO MISSING DEV. PACKS

Hi there, I was trying to build "lib32-libpcap" from AUR using yaourt when the gcc(?) reported an error as following:
==> Starting build()...
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... gcc -m32
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
==> ERROR: A failure occurred in build().
Aborting...
The content of the "config.log" file:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --enable-ipv6
## Platform. ##
hostname = mzws
uname -m = x86_64
uname -r = 3.2.8-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/core_perl
## Core tests. ##
configure:1794: checking build system type
configure:1812: result: x86_64-unknown-linux-gnu
configure:1834: checking host system type
configure:1849: result: x86_64-unknown-linux-gnu
configure:1871: checking target system type
configure:1886: result: x86_64-unknown-linux-gnu
configure:2036: checking for gcc
configure:2063: result: gcc -m32
configure:2301: checking for C compiler version
configure:2308: gcc -m32 --version >&5
gcc (GCC) 4.6.2 20120120 (prerelease)
Copyright (C) 2011 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2311: $? = 0
configure:2318: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.6-20120120/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --enable-libstdcxx-time --enable-gnu-unique-object --enable-linker-build-id --with-ppl --enable-cloog-backend=isl --enable-lto --enable-gold --enable-ld=default --enable-plugin --with-plugin-ld=ld.gold --disable-multilib --disable-libssp --enable-checking=release
Thread model: posix
gcc version 4.6.2 20120120 (prerelease) (GCC)
configure:2321: $? = 0
configure:2328: gcc -m32 -V >&5
gcc: error: unrecognized option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:2331: $? = 1
configure:2354: checking for C compiler default output file name
configure:2381: gcc -m32 -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu conftest.c >&5
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.2/../../../libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: skipping incompatible /usr/lib/libgcc_s.so when searching for -lgcc_s
/usr/bin/ld: cannot find -lgcc_s
collect2: ld returned 1 exit status
configure:2384: $? = 1
configure:2422: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2429: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_target=x86_64-unknown-linux-gnu
## Output variables. ##
ADDLARCHIVEOBJS=''
ADDLOBJS=''
BT_SRC=''
CAN_SRC=''
CC='gcc -m32'
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2'
CPP=''
CPPFLAGS=''
DEFS=''
DYEXT=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
GREP=''
HAVE_LINUX_TPACKET_AUXDATA=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu'
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAN_FILE_FORMATS=''
MAN_MISC_INFO=''
OBJEXT=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PCAP_SUPPORT_BT=''
PCAP_SUPPORT_CAN=''
PCAP_SUPPORT_USB=''
RANLIB=''
SHELL='/bin/sh'
SHLICC2=''
SSRC=''
USB_SRC=''
V_CCOPT='-O'
V_DEFS=''
V_FINDALLDEVS=''
V_INCLS=''
V_LEX=''
V_PCAP=''
V_RPATH_OPT=''
V_SHLIB_CMD=''
V_SHLIB_OPT=''
V_SONAME_OPT=''
V_YACC=''
ac_ct_CC='gcc -m32'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_cpu='x86_64'
target_os='linux-gnu'
target_vendor='unknown'
## confdefs.h. ##
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
configure: exit 77
and the makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Am running a up-to-date x64 Arch with [multilib] enabled; perhaps it's a silly mistake I made somewhere but I'm no dev and so cannot figure out what went wrong in the config.log....please help with your kindness and thanks in advance!
Last edited by karbon (2012-03-10 04:28:58)

Thanks for your replies:)
Allan wrote:Are you really up-to-date? gcc-4.6.3 was put in [core] four days ago but you still seem to have 4.6.2.
Well...at least as up-to-date as on March 2nd(when I did last system-wide upgrade); trying to update system tonight to see whether this works.
stronnag wrote:If you have multilib and testing enabled, you also need multilib-testing, otherwise (as I know from bitter experience), you get these hard to track down errors.
Nope I didn't enable [testing]; I've discovered some packages in [multilib], namely gcc-multilib or something similar(with the -multilib subfix) and some of these packages belong to the group "multilib-devel". Is installing these packages a must for compiling 32-bit packages?

/dev/null changes result, why? ( How to know if svn repository exists )

Hi,
Because I am writing last few weeks some scripts for a project, I do want to put those under svn ( subversion ). As a scripting exercise I want to be able to create Repos and project folders in one go and add changes to the repo's svn conf files.
I want to check if there is already an existing repository and if the name=passw line is already added to the passw db.
I did use:
svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c
to check for the error message returned by svnlook
svnlook: Can't open file '/Volumes/Development/_svnRepo/SSHToolNew/format': No such file or directory
and want to continue doing my stuff when the result is bigger then 0, otherwise create the repo first with some options.
With the following info
/Volumes/Development/_svnRepo/SSHTools exists
/Volumes/Development/_svnRepo/SSHToolNew doesn't exists
using ( typed in the sh )
svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c
1
echo "rv:" $?
1
gives as result 1 in the shell and when using echo "rv:" $?
however
svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c &> /dev/null
echo "rv:" $?
0
gives 0 as result.
And when the folder do exists it return the opposite!?
Just to understands the happening. Why the difference with &> /dev/null ?
What do I mis here?

Hi Thanks you for your reply,
I want that the result goes into a var so that I can compare it in an 'if' statement.
If I leave & out then I get the following same result
bash-3.2$ svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c > /dev/null
bash-3.2$ echo "rv: "$?
rv: 0
It should be one ( 1 ) because the result count is one. Or am I wrong?
So basicly, why is it changing the result? or is $? not the result of my line?
What is the best way to check if f.e a command is failed like the one I use in an if statement? Can I move the result directly into a var, something like?
bash-3.2$ svnlook youngest /Volumes/Development/_svnRepo/SSHToolNew 2>&1 | grep "No such file or directory" -c | MyVar=$? ( or whatever needed )
Thanks again

Error /dev/rmt/0mn: cannot create when taking backup

Hello Gurus
I am getting the following error when I am trying to take SAP system backup on tape :-
BR0278E Command output of 'LANG=C cd /oracle/SOL/sapbackup && echo .tape.hdr0 /usr/sap/SOL/SYS/exe/run/brtools -f detach LANG=C cpio -ovB > /dev/rmt/0mn':
sh: /dev/rmt/0mn: cannot create
BR0280I BRBACKUP time stamp: 2009-07-22 12.12.26
BR0279E Return code from 'LANG=C cd /oracle/SOL/sapbackup && echo .tape.hdr0 /usr/sap/SOL/SYS/exe/run/brtools -f detach LANG=C cpio -ovB > /dev/rmt/0mn': 1
BR0222E Copying /oracle/SOL/sapbackup/.tape.hdr0 to/from /dev/rmt/0mn failed due to previous errors
BR0219E Initialization of volume SCRATCH in device /dev/rmt/0mn failed
I checked the permissions of brtools as per SAP note 113747. I have set the correct permissions as per note.
Server details :-SunOS cpdsol 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V440
Please help mee
Sarin

Hello
The permissions of brtools
cpdsol:soladm 25% ls -al br*
-rwsrwxr-x   1 orasol   sapsys   5758992 Jun 12 15:48 brarchive
-rwsrwxr-x   1 orasol   sapsys   5920384 Jun 12 15:48 brbackup
-rwsrwxr-x   1 orasol   sapsys   7786120 Jun 12 15:48 brconnect
-rwxr-xr-x   1 soladm   sapsys   6281792 Jun 12 15:48 brrecover
-rwxr-xr-x   1 soladm   sapsys   2482144 Jun 12 15:48 brrestore
-rwxr-xr-x   1 soladm   sapsys   8107904 Jun 12 15:48 brspace
-rwxr-xr-x   1 soladm   sapsys   3097984 Jun 12 15:48 brtools
I also executed the command suggested by Joe
cpdsol:soladm 29% grep tape_address /oracle/SOL/102_64/dbs/initSOL.sap | cat -ve
tape_address = /dev/rmt/0mn$
default: value of the tape_address parameter$
tape_address_arch = /dev/rmt/0mn$
tape_address_rew = /dev/rmt/0m$
default: value of the tape_address_rew parameter$
tape_address_rew_arch = /dev/rmt/0m$
default: value of the tape_address_rew parameter$
tape_address_ctl = /dev/...$
default: value of the tape_address_rew_arch parameter$
tape_address_ctl_arch = /dev/...$
Does the $ at the end of the parameter have any significance ??
Sarin

[solved] systemd times out waiting for dev-null.device on encrypted fs

I have a relatively new install of Arch on my laptop. The relevant sections of the drive setup are a luks encrypted root device (with associated unencrypted /boot), and a large ntfs device encrypted with truecrypt. That contains my home directory, which is shared with the Windows 8 dual-boot on the machine.
I have all this mounted on boot, so my typical usage is to enter my password for the encrypted root, followed by the password for the truecrypt-encrypted data drive, then normal login.
This has been working fine for a couple of weeks. This afternoon I rebooted my machine from Windows to Linux, at which point the secondary encrypted drive failed to mount. The root device mounts fine.
On further examination, in the form of journalctl -xb, I'm getting the following errors after mounting the encrypted root device:
Feb 12 21:29:54 kafka systemd[1]: Job dev-null.device/start timed out.
Feb 12 21:29:54 kafka systemd[1]: Timed out waiting for device dev-null.device.
-- Subject: Unit dev-null.device has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Documentation: http://www.freedesktop.org/wiki/Softwar … e9d022f03d
-- Unit dev-null.device has failed.
-- The result is timeout.
Feb 12 21:29:54 kafka systemd[1]: Dependency failed for Cryptography Setup for cryptdata.
-- Subject: Unit [email protected] has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Documentation: http://www.freedesktop.org/wiki/Softwar … e9d022f03d
-- Unit [email protected] has failed.
As my root home directory is on the root filesystem, I can still log in as root. If I try to mount or unmount the truecrypt device (located at /data) the command hangs. After removing "auto,x-systemd.automount" from that device from /etc/fstab and rebooting, I have a significant delay at boot, but I can then mount the /data device as normal.
I can't find anything related to this either here or on Google. Any ideas?
Last edited by tealeaf (2014-02-13 12:01:55)

WonderWoofy wrote:A bit OT, but I just want to mention that having your $HOME on ntfs is probably not the best idea either. It may work, but because it is not a POSIX compliant filesystem, there is a good chance you might run into some issues.
Thanks for the warning. Sadly, as there are applications I need for work that only run in Windows, I need to dual boot this machine with Windows 8.1. This is the best option I can find for sharing my home directory, which is also a necessity due to the amount of data I have to share between the systems. I would much rather trust to ntfs-3g-ar and its UserMapping (and all the fiddling with ACLs that I had to do) than to the Windows ext2 drivers I can find. They all seem to be several years out of date. Linux is much better at talking NTFS than Windows is at talking EXT. (To be honest, I'm actually quite impressed with Windows 8 since the upgrade to 8.1. As a long term Arch user and a fan of tiling window managers it's interesting to see Windows moving in the right direction. )
With 'permissions' in the /etc/fstab and the .NTFS-3G/UserMapping file in place it works almost seamlessly. (It took a lot of tinkering with ACLs in Windows and Linux, but it's working very well now. One tip that I'll write here in case it's of use is that you want the last line of the UserMapping file to be a 'generic' mapping. When I didn't have that there were very strange things going on.)
The only two minor problems I have now are:
1) A few applications don't like FUSE filesystems. Steam worked for a while and then broke; reinstalling it failed at every stage. When I checked, it seems that FUSE is a known problem for Steam. (I don't think it's restricted to NTFS.) My response to that was to create /home/.local/$HOME on my root (ext4) filesystem and symlink out to it for troublesome applications.
2) There are a few characters for filenames that Windows doesn't like, making those files inaccessible in Windows. (Colons are the major culprit.) They're usually quite easily renamed. (The exception being my .maildir folder, which I have had to duplicate natively in cygwin.)
Neither of these are anything more than minor niggles. I appreciate the warning, though.
Having said that, if you have an alternative that lets me share a truecrypt-encrypted drive between Linux and Windows that is better than the NTFS-3G approach, I'd love to hear it for future reference.

/dev/null file permission changes frequently

Hi,
We are experiencing file permission change issue frequently for the
following files:
root@domain5 # ls -l /devices/pseudo/mm@0:null
crw-rw-rw- 1 root sys 13, 2 Apr 22 2009
/devices/pseudo/mm@0:null
root@domain5 # ls -l /dev/null
crw-rw-rw- 1 root sys 13, 2 Oct 25 07:01 /dev/null
By default, above is the file permission settings. If the file permission
changes, it will look like as below:
root@domain5 # ls -l /devices/pseudo/mm@0:null
cr--r--r-- 1 root sys 13, 2 Apr 22 2009
/devices/pseudo/mm@0:null
root@domain5 # ls -l /dev/null
cr--r--r-- 1 root sys 13, 2 Oct 25 07:01 /dev/null
Due to this file permission change the script which uses this file loose
the write permission and the script fails. To fix this issue, we will be
manually changing the permission. Can you please help me to know the cause for
this file permission change.
Thanks,
Ram.

You need to correlate any changes on the system to when you have the problem, or see the date on /dev/null change. Software packages can change this, applications can change this, sometimes even patch installs.
Even certain administrative practices.
Here's one example, where touching a vendor software-created printer config with native Solaris admintool would change /dev/null permissions
http://www.rootunix.org/SOLARIS/printFAQ.txt
10) ONLY ROOT CAN SEND PRINT JOBS:
This problem is caused by network spooling software that for a
network printer that uses /dev/null for the printer device. The
software monitors the queue and spools the print requests over the
network to the printer. If the printer setup is modified in any
way with Admintool, the printer device (/dev/null) permissions will
change to 600 owner lp.

Com.sap.security.core.ume.service failed. J2EE Engine cannot be started

Hi,
I have configured SNC on NetWeaver 7.0 (ABAP+JAVA) System on Windows 2003 Server with MS-SQL 2005 Database.
After the SNC configuration restarted the Server but the JAVA Server process is going down with EXIT Code -11113. The SNC Configuration is working fine but JAVA is not running. SDM and dispatcher are in green but server process is going gray.
I have checked the log files under C:\usr\sap\SID\DVEBMGS00\j2ee\cluster\server0\log
The following is the part of log file.
#1.5#005056BA6C3F001D0000000F000008D8000489ACAFC86070#1277274683393#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_71##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: SNC required for this connection
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
     ... 6 more
#1.5#005056BA6C3F001D00000011000008D8000489ACAFC8628E#1277274683393#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_71##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
Please help me to solve the issue.
Thanks,
Ajay.

Hi Tim,
I have configured using Kerberos library for 32 bit on Net Weaver 7.0 with MS SQL 2005 Server on Windows 2003 Server. I didnt change any thing on JAVA side. I have configured as per the Kerberos configuration steps as per below URL
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/44/0ebf6c9b2b0d1ae10000000a114a6b/frameset.htm
The configuration was successful and I am able to login with out asking password, but After the configuration when I have restarted every thing on ABAP side works well but JAVA server process going down with EXIT code -11113. One of the log file contains follows error message.
com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: SNC required for this connection
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jun 25, 2010 3:05:24 AM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_69] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
One of the line says "SNC required for this connection". What does this mean? What else need to be done for JAVA to communicate with ABAP?
Thanks,
Ajay.

/dev/null link destroyed. Need help

I have Forms 6i applications deployed on the internet under Oracle 9iAS 1.0.2.2 on Solaris 2.9 64 bits OS.
I am starting the 9iAS running the command "apachectl startssl" as 'root' because that's the only way I am able to grab port 443. However as soon as any output is redirected to /dev/null, the /dev/null link is broken and replaced by a /dev/null file writable to only by root.
My question is what can I do to prevent that?

Steve Walter (guest) wrote:
: The "Deploying Applications on the WEB" docs are good for
: release 2.1, but lack all detail in 6.0. Does anyone have a
: guideline for building a forms cartridge in 6.0. I've
followed
: the 2.1 documentation, knowing it is a bit different, but I
: still can't get it to work.
: Thanks for any and all help.
: Steve
The error I recieve is Can not service this request, Please try
again later
null

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

Cisco ISE 1.1.1.268 Giving error (Report Generation failed. Cause: Null)

I have this issue and I would be very thankful if someone has the answer for this. When I am trying to access Operation > Report > Catalog > Posture > Posture Detail Assessment & clicking on any posture session detail icon. I am getting following attached errors.
1. Report Generation failed. Cause: Null
2. Cannot execute the statement.
Does anyone knows how to get rid of this error & to get access of posture detail.
Thanks

The error message means that Active Directory server Reject the authentication attempt
as for some reasons the user account got locked.I guess, You should ask your AD Team to check in the AD
Event Logs why did the user account got locked.
Under Even Viewers, You can find it out
Regards
Minakshi (Do rate the helpful posts)

ACR Raw images wont copy to Jpeg or Tiff; as it fails with "Cannot Create File"

Requesting immediate help if anyone available currently
I've been using Photoshop CS6 for several years, never a problem at all. As soon as I bought Creative Cloud, I see many issues that cannot be resolved or are recurring.
Again today as I go to copy files (images) from Adobe Camera Raw, to say a Tiff or a Jpeg, it appears to begin to copy as normal, then suddenly a box appears with all my copying
file name/numbers, and it begins to eliminate one by one "Cannot Create File", failing the entire process to copy. I have never seen this until I began using Creative Cloud about a
month ago.
Can anyone help this Saturday evening as i am trying to complete a large project of images for others who expect them soon.?
Thank you and I look forward to any advice soon,
Mark Seibold, Artist-Astronomer, Portland Oregon

Hi Rick
Thanks for clarifying that. Yes, that term was my mistake, as I meant to write 'Save As"
Another forum respondent just replied also, and he states as so many others do, that they do not use
the Adobe Camera Raw app formerly with CS6, as they instead use Lightroom, so he apologized that he
was not familiar with ACR but that I might have an old CS6 plug-in running that may not be completely
compatible with the new Creative Cloud. I am not sure if this is the problem.
What I would find as not really likely, is that the Creative Cloud engineers would go through all the trouble
to redesign from the old CS6, then even assist us over the phone to help install it, but in oversight,
leave us without a proper update to properly run Adobe Camera Raw. I also have never really understood the advantage of Lightroom. I'm sure that many must enjoy its efficiency, as I hear wedding photographers like it for huge batch processing of adjusting many images in synchronicity all at once. I would say that I do the same with ACR accessing it through Bridge, and I like ACR's quick and simple access for simple image adjustments and then say a small batch all synchronized, then finally to "Save As" for all selected to a final output as Tiff or Jpeg.
As an astronomer that has just started learning to use Registax for night sky images, we also like the ACR adjustments and then to "Save As" eg. all Jpeg or all Tiff, to then photo-stitch large landscape and night sky panoramas with Microsoft ICE photo-stitching.
Sorry for the long description here, but I hope to relate the total idea of what I am doing for the past years. I'll even attach an example >
Thanks for your possible solution to my problem in "Saving As" in ACR,
Mark

S10u 7 - smpatch in BE fails - patchadd: /dev/null: cannot create

Similar Messages

Maybe you are looking for