S12 Windows 7 - Mouse scroll issues and tapping won't stop.

I recently purchased an S12 Ideapad for my girlfriend for her studies and installed Win7 in the process. It works perfectly aside from one tiny issue. We can't get it to stop left clicking when tapping the mousepad surface and the vertical scroll area on the rightside of the pad does nothing.
I've tried installing the official Lenovo drivers for Win7 as Administrator / Then with Vista Compatabillity and then finally using the generic Synaptics drivers - but no luck, the options just doesn't appear in the Synaptics configuration menu of the mouse. All I can change are the functions of left click and right click. My old MEDION laptop has all the functions I am looking for in that same menu.
Has anyone else experienced this and/or know of a solution to this annoyance?
Windows 7 Ultimate
S12 Ideapad
S/N: EBxxxxxxxx
Lenovo Driver used : http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=733830 (The Touchpad one for windows with the funny typo Touch >I< pad title)
Synaptics Driver used : http://www.synaptics.com/support/drivers ( The 32bit one for Windows 7)
Regards,
Anders Hermansen, Denmark.
Moderator Note; s/n edited for members own protection

Hi and welcome.. you can try
alternate driver for touchpad ( i used since W7 beta and RC.)
v13.2.6.1 Vista x86/64 and WinXP x86/64 DriverVer=07/20/2009, 13.2.6.1
---> Here <---
An Overview of driver settings with english screen pics you find here Touchpad Synaptics Menue translated ger-eng
not a driver but i install it on all synaptics touchpad machines
all time cool internet surf fun and full touchpad fun a must in all cases....
---> Here <---
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

Mouse/mousepad clicks and taps not always recognised.

I've noticed recently that I have an issue with both my magic mouse and my mouse pad, effecting both left and right clicks on the mouse and mousepad, and taps on the mousepad too. I've noticed the issue across many of the main applications I use, such as Mail, Adium, but is more apparent in Safari, or other browsers, where mouse clicking is used more.
The issue is that not all mouse/mousepad clicks and taps are recognised on the first click, even when the mouse icon changes with link rollovers etc. It is more apparent when changing between application windows or after opening a new window/tab/page in Safari. Closing/minimising windows is effected etc, as is selecting items on the Dock. In all cases when this happens, a second click/tap always works.
I'm guessing that it is a problem with Finder, maybe caused by another program or something. It's really annoying actually!
Any ideas?

ChloeHeather wrote:
The mouse has fresh batteries is fully connected to the computer and the cursor moves as normal.
But when I click (either right or left) the computer ignores me.
I can only assume that:
* mouse is somehow broken - although clicks feel okay, or
* computer is somehow broken and can't tell clicks are being made
So, what do I do?
Buy a new mouse for £50? Or adjust something in the computer? No idea which is best, and HP won't help as the computer is just over one year old.
Try moving the USB receiver closer.
You could also try uninstalling and reinstalling the drivers from Device Manager, then the original driver then the updated driver from your Update page on the HP Website.
Also try running a virus scan using Malwarebytes if you can, Malwarebytes Home Page
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

Have recently installed windows 7 32bit operating system and it won't allow me to install iTunes, help??

Have recently installed windows 7 32bit operating system and it won't allow me to install iTunes, help??

Let's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Windows Vista cannot find bonjour and it won't allow me access to my ipad.

For some reason my Windows Vista cannot find bonjour and it won't allow me to do anything on my ipad. If I reinstall itunes will that work? If I update itunes will that work?
Please Help....
Thanking You in advance,
Frankie

Hi Frankie,
This article covers how to check if Bonjour is installed correctly and how to reinstall if it's not:
Bonjour for Windows: How to tell if it successfully installed
http://support.apple.com/kb/HT2703
Cheers!
- Ari

HT2845 My magic mouse dropped connection and now won't pair with the mac.

My magic mouse dropped connection and now won't pair with the mac. When I search for it, it finds the mouse but just won't connect. Any ideas?
(I've tried new batteries)

Try resetting the PRAM and SMC.
Barry

HT2480 I keep getting the message "unable to verify account information" how do I fix this? It happened out of no where and I tried re-entering the exchange info and it won't stop giving me the message...any ideas?!?

I keep getting the message "unable to verify account information" how do I fix this? It happened out of no where and I tried re-entering the exchange info and it won't stop giving me the message...any ideas?!?
I already reset network settings like someone suggested, but still cannot get my exchange acct to work.

I'm having the same problem but with high speed access.
Anyone know the answer?
~Chris

My iphone 3gs randomly started to turn itself on and off today and it won't stop like it is continuously doing this. I haven't dropped it or anything it just randomly started doing it. I put it in rice just in case it got water on it. Help! ?

My iphone 3gs randomly started to turn itself on and off today and it won't stop like it is continuously doing this. I haven't dropped it or anything it just randomly started doing it. I put it in rice just in case it got water on it. Help! ? My phone won't even be a year old until next month and I was really wanting it to last me for 2 years. :/ What should I do?

Took my phone to the Apple store this week and they told me it was a hardware/screen malfunction. They replaced the screen for free since it was under warranty. Now it works fine again!

Mighty Mouse Scroll Issue

I have a strange problem with my mighty mouse. On my Mac I have 2 separate logins - both with admin. The scroll up and down works with one of the logins but not the other. I have tried over and over with both logins, turning the scroll on and off but it remains the same. It's obviously not a mouse problem - does anyone know what may be causing this?

I found this : Mouse won't scroll for one User but works for another : answer posted by a knowledgeable user.
While it doesn't match your issue exactly, its similarity indicates a possible solution. Easy enough to try anyway.

Audition CS5.5 mouse scrolling issue

Not sure if this has been asked or even resolved. I am having a hell of a time zooming in/out with the mouse scroll. I have a feeling its my mouse but the problem only happens when using Audition CS5.5.
I have to pretty much fling the scroll wheel in order to zoom. The scroll wheel works fine in other programs (ie: IE, Firefox, Word, Outlook, etc.) It worked fine in Audition 3.0. Another person in the building has a wired mouse with the same computer and scrolls fine, but I havent had a chance to try out a wired mouse on mine to test. I am using a USB wireless mouse. I can use the scrolling zoom on the mouse pad and that works. But didn't know if anyone else had an issue with their mouse.
Edit: It scrolls Vertically in multi-track with scroll wheel... but not horizontally in multi-track or edit view.
Message was edited by: marc61880

Thanks for coming back and explaining the issue. It doesn't happen very often, but it can be a lifesaver for others who might have the same problem down the road.

Mighty Mouse Scroll Issues

I have a strange problem with my mighty mouse. On my Mac I have 2 separate logins - both with admin. The scroll up and down works with one of the logins but not the other. I have tried over and over with both logins, turning the scroll on and off but it remains the same. It's obviously not a mouse problem - does anyone know what may be causing this?

Isopropyl alcohol. Preferably 95% but I've done this with the typical 70%, so whatever you have in your medicine cabinet. With Mouse unplugged (powered off, battery removed for wireless mice,) put the mouse on a paper towel and pour a small amount of alcohol over the ball. What you are trying to do is get some alcohol down past the ball and into the internal rollers, which have some gunk on them that you're trying to remove. Isopropyl alcohol will not corrode the electronics and will help loosen and break up the gunk. Roll the ball and pour a little more. Repeat a few times. You will want to let everything dry as much as possible before using. Thus pouring a small amount and not the whole bottle and not "dunking" the mouse in a bowl filled with isopropyl alcohol. Do that only if you get really desperate, but if you do, then let it drip and air dry afterward.
There is not much space for the gunk to be "flushed" out so eventually this may not work. At which point you can look on Youtube and see several tutorials on disassembling the mouse. The mouse is glued together so this is not without risk. You may end up just buying a replacement mouse so just be prepared before attempting disassembly or even the alcohol.
(In case you're concerned, isopropyl alcohol has been used for cleaning around electronics for many, many, many years. Used to clean water/syrup/milk/juice damage since it doesn't corrode the circuit boards. While it generally doesn't conduct electricity, it was generally discouraged to use it on live equipment for various reasons. And due to skin irritation, gloves often were used, but in this case with the mouse and the small amount being used, it's up to you to whether you want to use gloves and eye protection.)

Magic Mouse scrolling issues in Yosemite

Ever since updating to Yosemite (10.10.1) on my MacBook Air (2014 - 1.4 GHz i5, 4GB ram), my Magic Mouse has been exhibiting some odd behavior. Often times when I try scrolling up and down a page in Chrome with a one-finger vertical motion, it decides to interpret the gesture as a one-finger right swipe instead, and ends up browsing back to the previous page. I have checked carefully and the scroll gesture I am making is definitely vertical, not at all horizontal or diagonal. Usually if I remove my hand from the mouse and try again it will be correct, though sometimes it takes a few tries. It's very annoying and only started happening after I updated to Yosemite.
Any ideas what could be causing this or how to fix it?

UGH my mouse is doing the same thing and it's ******* me off, I keep going back/forward between webpages when I only want to scroll. It seems 50/50 though...sometimes it scrolls, sometimes it just goes back but it's super annoying. Anyone have a fix?!?!?

Multi gesture and tap-to-click stopped working on Logitech touchpad

I have a Logitech TK820 that has been working great until I did a upgrade for about one week ago. Now multi gesture stopped working completely and also tap-to-click doesnt work.
Does anyone have any clue on what I can do to get it working again.
Thanks

hi,
thanks for your reply. i haven't had time to deal with this issue since i wrote about it in october.
i found the 'properties' window for the touchpad mouse but there is no reset button. i continue to have this issue and it is becoming more frequent although i have not been able to identify what triggers the sudden shut down of the tap-to-click function.
but something new has cropped up: when the tap-to-click stops working, the next time i tap the touchpad, the pointer goes to the Start button! this happens every time. i don't know that anything is different?
any further pointers (forgive the pun) would be most welcome!
--David

Help my ipod keeps turning on and off and it won't stop. can someone help me

i was just playing on my ipod touch then it froze then it started turning off and on and i can not stop it at all.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

The menu bar goes transparent after 50-60 seconds and my mouse scroll wheel and keyboard wont work unless I click somewhere on the screen

I hope someone can help. I'm using Firefox 31.0.1
The menu bar at the top of the screen is a white transparent color and everything is working fine but after 50 or 60 seconds it changes to completely transparent, I can still read the words file, edit etc. This is where the scroll wheel on the mouse and anything I am typing stops working. Now all I have to do is click somewhere in the window and it works again but only for 50-60 seconds. I have had to click the screen twice since I started typing this because when I look at the screen, everything I have typed is not there because the menu bar went transparent again while I was typing. Its driving me nuts.
I don't remember this being a problem before today, if it was I would surely have noticed. Have I pressed something or clicked on something by accident??
I'm considering throwing the lot out the window, its really annoying, please help lads and ladies.

Hello,
According to your user agent, you are on Firefox 32. If you planned to use Firefox 31 ESR, you can grab a copy here:
* https://www.mozilla.org/en-US/firefox/organizations/
Out of curiosity, when it turns transparent, is there a "(Not Responding)" appended to the end of the window title? If you don't have the Window title being shown, it might show up if you have window titles shown on your taskbar, or in the task manager (right click on your taskbar and select "Start Task Manager"). If you do see a Not Responding, it could be a slow script on one of the pages you are viewing.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Mighty Mouse Scroll Issue - Application Specific

So, I just got a bluetooth Mighty Mouse and have a strange issue. I have one program where it simply won't scroll? All other programs function properly, so I have a decent connection. It's just this one database program (Panorama), which runs our business applications that won't scroll?
I already have a BT Mighty Mouse on my laptop and it works fine with this program? Any thoughts as to where to begin trouble shooting? I've tried everything I could think of and don't know what else to try.

No help huh? I have spent literally hours trying to figure this out. One solution, which I can't try is reinstalling the software for the bluetooth wireless mouse. This really ticks me off...I just ordered this machine and it arrived a couple of days ago, set it up and all is fine except for this issue. I'm going through the package shipped to me by Apple (I upgraded my keyboard and mouse to bluetooth when I configured the machine and ordered in online from apple). THERE IS NO DISK FOR THE WIRELESS KEYBOARD OR MOUSE IN THE PACKAGE!!! What the heck. Shouldn't there be? I can't seem to find the software anywhere on line, so how am I supposed to reinstall the software to see if that clears my problem? Aaaahhhh.....

S12 Windows 7 - Mouse scroll issues and tapping won't stop.

Similar Messages

Maybe you are looking for