S20 and Marvell 88SE63xx/64 Adapter issues....

My S20 started having problems booting up a couple of days ago. It will boot up sometimes, but more times than not it stops during the boot process. I am fairly sure that it is due to the Marvell adapater. I say this because when it does work, I get a message on the screen that says Marvell 88SE63xx/64 Adapter - BIOS Version 3.1.0.2607 and then it starts adding periods. After that the computer boots up just fine. However, when it fails the screen will display Marvell 88SE63xx/64 Adapter but then it stops. Nothing else will come up. Sometimes it will display the BIOS revision for the Marvell, sometimes it won't. As long as the periods start showing up I know it is going to boot successfully, but more times than not now, they never come up.
Any help would be greatly appreciated here. I am curious if this is the hard drive controller and if so, is it onboard or is it on the eSATA card. If its on the eSATA card, can I just remove it and use the onboard SATA ports???
Solved!
Go to Solution.

what your hard drive setup?   can you post model numbers and quantities of each drive?
if you only have one SATA HDD then i'd suggest using the onboard SATA ports.   the onboard ports are handled by an Intel ICH10R controller.   this includes the eSATA port on the back.   you might need to enable the onboard controller in the BIOS as the previous owner might have disabled it.
you can then remove and eliminate the other two adapter cards.   they aren't necessary unless for some reason your drive is SAS and not SATA.
if in doubt, post a photo if the inside of your chassis so we can take a look.
(edit: typo)
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

AC Power Adapter issue with new (refurbished) ibook...

I just got my refurbished ibook today and went to plug it in and test it, and then wanted to charge the battery on it. At first I thought it wasn't doing anything when I went to turn it on (it made the starting sound but the power button didn't turn on or anything), but then after trying a couple times, I noticed that the black screen had a faint image of an apple on it. I had the screen too far to the front for me to see it clearly (as it's an lcd screen) and later when setting my preferences, I had noticed the brightness was just too dim which I adjusted...
So the power button never did glow when it was turned on (at least I didn't notice it after I got it booted up). My adapter's plug fits loosely in the socket on the laptop but still glows green, but all the time... Isn't it supposed to glow orange when charging??? Well I was setting up everything and did my power management settings as well, and as I have it set up to show me my battery level on the desktop, I was noticing that it was depleting (at what I would guess is a normal pace for my current settings), it started off around 83% and had gone down to 58% or so after about 1 and a half hours with highest settings basically. But my power adapter was plugged in the whole time... Shouldn't it be using my AC power and not the battery's?
So I turned it off and now it is sitting there (hopefully charging), but that little green light on the adapter where it plugs into the laptop is just that, still green...
Does all this mean that there is a problem with the power adapter and its ability to actually charge my laptop? I got this refurbished (from TigrfDirect) with a 1 year warranty (from Apple) so this should be covered, but as I just received the thing today, I really don't want to have to deal with a messed up AC Adapter...
Also, I haven't even yet checked the battery itself to see what # it is and if it is one of the ones that is part of the recall or not... I would hate to have to do that and not have a working AC Adapter, though of course if the adapter is't working, I can't charge the thing anyways, so I guess I would have to wait another few weeks with dealing with Apple and the warranty issues anyways.
I looked in the help section and the only suggestion they had for if your battery doesn't charge is to take it out and put it back in and then attach the adapter again. I guess I could do that at the same time I check on the battery's recall status, I just hate opening my computer up as soon as I get it. Also the battery cover is not totally flush with the rest of the case, one corner sticks up a bit, and I think it was a replaced item as it doesn't have the little LED lights that the computer says should be there to tell me how much the battery is charged (unless this is UNDER the cover for some reason, but the cover is bright white compared to the rest of the ibook coloring, so it seems as it was just a basic replacement cover used)...
Ok, so thanks for any input you might have. I will let people know in a couple hours if the ibook has actually charged at all during that time or not...

So I did the reset button thing and it didn't do anything at all... If I plug in the power adapter without the battery the laptop will not turn on at all, so I am guessing that it definitely is the adapter and will have to contact Apple to somehow get a new one. Oh great, tomorrow's Friday and isn't this a holiday weekend? Which means it will probably take even longer to get them to send me a replacement adapter... You think that buying a refurbished mac would mean that they would have tested out all the parts/components first before reselling it...
And so while I was at it, I checked on my battery's model # and serial # and it is one of the ones on the recall list. I think I was right that it had been replaced (now that I know that the battery is part of the back cover) which would probably explain the recall battery as this is one of the older ibooks and should have been one of the lucky ones made before the ones on the list... I did get to see the lights (only 3 though) flash solid green for about 3 seconds when replacing the battery back into the laptop.
One good thing did come out of this... As I was taking the keyboard out to find the computers serial # (I already filled out my form for the new battery), I was surprised to see an Airport card. Not that it would have surprised me too much in the first place except that it wasn't listed in the details/parts list when I bought the laptop. It was also listed that my laptop had a 10GB hard drive (while the picture on the website showed a 30GB one). The box it came in said 30GB as well, but I just dismissed that. I had went to see how much space I had left on the HD to see that it had 13.99GB and this is after any formatting, and the install of OS 10.2.8 including OS 9.2.2... So a few added bonuses to help make up for the fact that it is NOT is as good shape as I was expecting (or should be to even be sold as a refurb IMO), and the fact that the AC adapter is completely faulty.
I just hope that I can get a new AC Adapter soon, so that I can at least be able use my laptop with some kind of power until the new replacement battery shows up. This must be some kind of terrible joke. I get the laptop to be able to use it for a few hours and then have it be without ANY kind of power for posibly up to 2 months? I seem to have the worst luck with Macs, which makes it strange as I have never had any problems with all the PC's I have ever used (and I started using computers when I was 4) but I have now had an imac die (possibly the HD), an Apple studio monitor start flashing on the screen possibly due to connector problems, and now this (and all within 2 months). I am almost ready to just give up, but I have spent too much time and money on all this mac stuff (and all for my obsession with OS X) to do it just yet.
So please tell me macs aren't always this horrible, or else I will have to make up my own commercials where PCs are better because at least they turn on and boot up for more than 1 week (I think I had the imac working for about 5 days total before it would boot with errors).
Or some kind soul could also mail me a working AC Adapter that would work with my ibook (if you happen to have a spare), so I could get to do more on it other than changing it's settings... I now only have 40% battery life left. I don't think I should even turn it on again as the boot up alone would drain away too much precious juice...

File adapter issue in Linux enviornment

hi'
I am deploying BPEL in Linux enviornment, and with the file adapter read operation I am reading a test.xml file this file is internally refering to emp.xsd (files are below), now the issue is the file adapter is reading XML file even if it is invalid, this was not the case in windows XP enviornment, please advice why it is behaving like this.
Also the path of my XSD is "/home/wsfbpel/public_html/XSD" and the file has all read write permission (chmod 777 filename)
XSD
*<?xml version="1.0" encoding="windows-1252" ?>*
*<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"*
xmlns="http://www.example.org"
targetNamespace="http://www.example.org"
elementFormDefault="qualified">
*<xsd:element name="readfile">*
*<xsd:complexType>*
*<xsd:sequence>*
*<xsd:element name="name" type="xsd:string"/>*
*<xsd:element name="empid" type="xsd:string"/>*
*</xsd:sequence>*
*</xsd:complexType>*
*</xsd:element>*
*</xsd:schema>*
XML (this is clearly invalid with respect to XSD it is refering to)
*<?xml version="1.0" encoding="utf-8"?>*
**
*<tns:readfile xmlns:tns="http://www.example.org"*
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.example.org /home/wsfbpel/public_html/XSD/emp.xsd">
* <tns:name>yatanveersingh</tns:name> *
* <tns:empidname>6499</tns:empidname>* +(incorrect element name)+
*</tns:readfile>*
thanks
Yatan

Hi,
My problem got resolved.
There was some access issue to see the txt files at the File Directory.
Thanks.

Receiver Mail Adapter Issue.

Hi All,
I am running an interface from proxy to email using the inbound mail adapter. The email adapter is resutling in the following exception:
failed to send mail: java.lang.StringIndexOutOfBoundsException: String index out of range: 0
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.StringIndexOutOfBoundsException: String index out of range: 0
Could any one please throw some light into this issue?
Thanks a ton! in advance.
Thanks,
Manohar Dubbaka.

Hi,
Thanks for the quick response.
I am trying to send an attachment using the email. I am using
Transport Protocol as : SMTP
Message Protocol as : XIPAYLOAD
Adapter Engine as : Integration Sever
URL as: smtp://10.1.1.11
Configure User Authentication as : Check
Content Encoding as: base64
Keep Attachments as : Check
And also using the Adapter Framework modules as:
AFT_Modules/StrictXml2PlainBean                               Local Enterprise Bean       1
AF_Modules/MessageTransformBean                           Local Enterprise Bean        3
AF_Modules/PayloadSwapBean                                   Local Enterprise Bean        2
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean      Local Enterpriese Bean   mail
I am converting the XML message into comma separated text file using the following transformation
1              Record.beginSeparator         "
1              Record.endSeparator           "\r\n
1              Record.fieldSeparator          ","
1              singleRecordType               Record
3             Transform.ContentType        text/plain;name="MGFSPECS.TXT"
2             swap.keyName                   content-type
2             swap.keyValue                   text/plain
This mail adapter was working fine, earlier. I am not sure, why this is resulting in issues ?
Truly, appreciate any kind of help in gettint this resolved.
Thanks
Manohar Dubbaka

Com.sap.aii.adapter.jdbc.svc and com.sap.aii.adapter.jms.svc don't start

Hello,
In order to configure JMS Receiver Adapter to access Websphere Application Server 7.0, I have recently deployed file com.sap.aii.adapter.lib.sca with the following libraries:
com.sap.aii.adapter.lib_api.jar
com.ibm.ws.ejb.thinclient_7.0.0.jar
com.ibm.ws.orb_7.0.0.jar
com.ibm.ws.sib.client.thin.jms_7.0.0.jar
com.ibm.ws.runtime.jar
javax.j2ee.jms.jar
The communication channel can reach the queue but when I send a message it fails because services sap.com/com.sap.aii.adapter.jdbc.svc and com.sap.aii.adapter.jms.svc are not started.
Checking dev_server0 file I found the following error.
==============================================================================================
Service com.sap.aii.adapter.jdbc.svc start ================= ERROR =================
com.sap.engine.frame.ServiceException: Could not obtain an initial context due to a communication failure. Since no provider
URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make sure that any
bootstrap address information in the URL is correct and that the target name server is running. Possible causes other than
an incorrect bootstrap address or unavailable name server include the network environment and workstation network configurati
on.
at com.sap.aii.adapter.jdbc.SapAdapterServiceFrameImpl.start(SapAdapterServiceFrameImpl.java:151)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Sinc
e no provider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make
sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible caus
es other than an incorrect bootstrap address or unavailable name server include the network environment and workstation netwo
rk configuration. [Root exception is org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=sapdpi-lpar,
port=2809 vmcid: 0x4942f000 minor code: 3586 completed: No]
at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:2228)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1414)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:944)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:865)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:545)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:123)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:798)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:242)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:255)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sap.aii.adapter.jdbc.SapAdapterServiceFrameImpl.start(SapAdapterServiceFrameImpl.java:100)
... 6 more
Caused by: org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=sapdpi-lpar,port=2809 vmcid: 0x4942f0
00 minor code: 3586 completed: No
at com.ibm.CORBA.transport.TransportConnectionBase.connect(TransportConnectionBase.java:425)
at com.ibm.ws.orbimpl.transport.WSTransport.getConnection(WSTransport.java:436)
at com.ibm.CORBA.transport.TransportBase.getConnection(TransportBase.java:187)
at com.ibm.rmi.iiop.TransportManager.get(TransportManager.java:89)
at com.ibm.rmi.iiop.GIOPImpl.getConnection(GIOPImpl.java:120)
at com.ibm.rmi.iiop.GIOPImpl.locate(GIOPImpl.java:209)
at com.ibm.rmi.corba.Corbaloc.locateUsingINS(Corbaloc.java:307)
at com.ibm.rmi.corba.Corbaloc.resolve(Corbaloc.java:378)
at com.ibm.rmi.corba.ORB.objectURLToObject(ORB.java:3721)
at com.ibm.CORBA.iiop.ORB.objectURLToObject(ORB.java:3256)
at com.ibm.rmi.corba.ORB.string_to_object(ORB.java:3619)
at com.ibm.ws.naming.util.WsnInitCtxFactory.stringToObject(WsnInitCtxFactory.java:1524)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1389)
... 16 more
Caused by: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:522)
at java.net.Socket.connect(Socket.java:470)
at java.net.Socket.<init>(Socket.java:367)
at java.net.Socket.<init>(Socket.java:180)
at com.ibm.ws.orbimpl.transport.WSTCPTransportConnection.createSocket(WSTCPTransportConnection.java:270)
at com.ibm.CORBA.transport.TransportConnectionBase.connect(TransportConnectionBase.java:354)
... 28 more
Service com.sap.aii.adapter.jms.svc start ================= ERROR =================
com.sap.engine.frame.ServiceRuntimeException: Could not obtain an initial context due to a communication failure. Since no pr
ovider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make sure t
hat any bootstrap address information in the URL is correct and that the target name server is running. Possible causes othe
r than an incorrect bootstrap address or unavailable name server include the network environment and workstation network conf
iguration.
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.bindAdapter(AdapterServiceFrameImpl.java:171)
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.start(AdapterServiceFrameImpl.java:125)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Sinc
e no provider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make
sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible caus
es other than an incorrect bootstrap address or unavailable name server include the network environment and workstation netwo
rk configuration. [Root exception is org.omg.CORBA.TRANSIENT: Connection state: State: ABORT (5) vmcid: 0x4942f000 minor co
de: 775 completed: No]
at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:2228)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1414)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:944)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:865)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:545)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:123)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:798)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:242)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:255)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.bindAdapter(AdapterServiceFrameImpl.java:163)
... 7 more
Caused by: org.omg.CORBA.TRANSIENT: Connection state: State: ABORT (5) vmcid: 0x4942f000 minor code: 775 completed: No
at com.ibm.rmi.iiop.Connection.checkEstablished(Connection.java:3091)
at com.ibm.rmi.iiop.Connection.send(Connection.java:2145)
at com.ibm.rmi.iiop.Connection._locate(Connection.java:463)
at com.ibm.rmi.iiop.Connection.locate(Connection.java:439)
at com.ibm.rmi.iiop.GIOPImpl.locate(GIOPImpl.java:219)
at com.ibm.rmi.corba.Corbaloc.locateUsingINS(Corbaloc.java:307)
at com.ibm.rmi.corba.Corbaloc.resolve(Corbaloc.java:378)
at com.ibm.rmi.corba.ORB.objectURLToObject(ORB.java:3721)
at com.ibm.CORBA.iiop.ORB.objectURLToObject(ORB.java:3256)
at com.ibm.rmi.corba.ORB.string_to_object(ORB.java:3619)
at com.ibm.ws.naming.util.WsnInitCtxFactory.stringToObject(WsnInitCtxFactory.java:1524)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1389)
... 17 more
==============================================================================================
Could anyone tell me why is trying to connect to "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService"? Do I have to configure a default provider URL for SAP PI server? If so, where I configure it? Any help will be appreciated.
Thank you in advance.
Roger Allué i Vall

Hi Roger,
we also experience the same issue and would be very keen to understand how you resolved this problem.
Many thanks.
Dieter

W530 AC adapter issue

Hi everyone,
Strange issue with W530 (mt/m:2447-5FG, Windows 7 Enterprise with all drivers up to date) and AC adapter 170W.
When plugged in with no battery installed, everything works fine. After installing battery(70++), and plugging in AC adapter, nothing happens - device working on battery, but not charging, AC adapter is not even detected.
Tried different battery, same thing. Tried AC adapter 90W, same thing. Tried AC adapter 65W - charging the battery, but there is no sign that AC adapter is plugged in. I tried to update BIOS, i get warning "connect AC adapter"
Any thoughts?

" Tried AC adapter 65W - charging the battery" : That's surprising (and quite desirable in a better world!), since normally the w530 refuses to operate or charge with non-native adapters... Once it doesn't detect the 2 inner notches in the circular plug, it runs on battery until this dies... The assumption is that older/alien PSUs can't deliver 170W @ 20V (>8A), hence it cuts off the plug.

Video Adapter Issues?

I just went through a download of recommended Lenovo updates and now have problems starting up the computer. I get consistent blue screen telling me that I may have memory or video adapter issues. Is this a video adapter or is there another cause? I wasn't getting this prior to the update at the end of July...

What ThinkPad exactly are we discussing here?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Power adapter issues using MacBook Pro in European countries?

Are there any known power problems with the new MacBook Pro in European countries such as United Kingdom, France or Italy assuming that I use one of the plug adapters in the "Apple World Travel Adapter Kit"?
Also, is it advisable to provide more protection between the electrical source and the computer than what the computer already handles such as a currency/voltage type converter?
Adapter Kit: http://store.apple.com/us/product/M8794G/B?fnode=MTY1NDA2Nw&mco=MjE0NjQ4NQ

The MagSafe adapter is designed to work with 110-240 volts so it's fine to use across those countries with the World Adapter Kit (I have one too). The only issue you might come across is earthing, i.e. you could feel a tingle in your palms when using some power supplies due to lack of proper earth connection.
Your alternative is to take your regular power lead and purchase a plug adapter, then you're more likely to get an earth connection and no tingle.
There's no real need for surge protection but it won't hurt.

I got internal error 2738 after trying to install the marvell yucon ethernet adapter driver

I got the marvell yucon ethernet adapter driver on the acer support page. My laptop is an extensa 5420-5038 with vista sp2 32 bit. My wired lan is not working but the wireless is. The version of the acer driver is 10.12.8.3 if that would help. I think uninstalling the old software for the adapter must have failed during installation and I don't know what to do. I don't know how to find any old applications or machine language software for the adapter in the computer to uninstall before trying again if that is what I have to do. Do I have to go to the command prompt and do something?

http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/internal-error-2738-when-trying-to-update-marvell/ce07aa54-f6d2-4834-89c5-71b61877eb4e

Z87-G45 Network Driver/Adapter Issue

Hello,
Since I purchased this motherboard a year and a half ago I've been having an issue with the network adapter. Typically when I boot my computer my internet won't work. When running the Windows Troubleshooting tool it says that the wired network adapter is experiencing problems. In order to get my internet to work I usually unplug and replug in the network cable a number of times, disable and reenable the adapter, and/or restart until it starts working again. Not a very clean method, but it usually works.
In an attempt to fix this issue, I downloaded the network drivers from the MSI website. I removed the driver program and uninstalled the driver from device manager. When I run the driver installer I get a message saying You must remove the following installation(s) before the setup can proceed. Please remove from Control Panel -> Programs and Features: * Qualcomm Atheros Killer Network Manager
The Qualcomm Atheros Killer Network Manager is not listed under Programs and Features since I've removed it. I cannot find anything related to Qualcomm in my computer's program files or anything. I'm really not sure where the installer references in order to determine that the program is installed - I'm thinking it could possibly be a reg key or something. Regardless, my wired internet is not working at the moment. I'd appreciate any help you guys could provide in the matter.
Thanks

Hey again,
I was able to install my network driver software, but I'm still having an issue with the network adapter. I'm not sure if this is a driver or a software issue, but like I said in the above post, in order to get my internet to work through that network adapter I have to unplug and replug in the network cable a number of times and disable and re-enable the adapter through the adapter settings page.
Would anybody be able to advise me on this?

Mini dvi to video adapter issue

I used it yesterday with no problem, but now it seems to not be working. I plug the adapter into my computer and the screen changes as always, but when I put my TV on video mode, it no longer comes through. Everything is plugged in normally but it just doesn't work.
has anyone else had this problem?

Hi Mr.Shickadance9,
There's not much in the way of troubleshooting a video adapter. What if you start up the computer and then connect the adapter, any change? Or if you start up the computer with the adapter already connected? Do both not work?
I'd recommend trying to reset the PRAM (with the adapter disconnected).
http://support.apple.com/kb/HT1379

TS1398 I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc.

I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
Thanks

Noooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!

HT1386 My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop and those are the songs I purchased via iTunes. How do I get the rest of the songs from iPhon

My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my iPhone back onto my HD.
The songs I'm not able to import casme from CD's. Nothing from napster etc.
I've tried and tried to import them rom iTunes vis "Library" " Import"

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I upgraded my 3rd generation ipad to ios 6.0.1 and now am experiencing various issues. Neither Pages or Numbers will open. I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone.

I upgraded my "new ipad" (the 3rd generation I think) to ios 6.0.1 and now am experiencing various issues.
1- Neither Pages or Numbers will open. I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone. The icon that allows me to create a new document also does not appear. I went to icloud.com to see whether my documents still existed, which brings me to the 2nd problem.
2- It appears that all of my Pages documents are still on icloud, but all of my Numbers documents are gone. There were only about 10, but I access 2 of them nearly every day, so this is a big issue for me.
I went into Settings and all of the icloud information is correct and it "Documents & Data" is on. When I look at the storage, I see the Pages documents but not the Numbers ones. The next thing I did was turn my ipad off and back on, but this didn't fix anything. Since my Pages documents are still on icloud, I then tried to delete the Pages app from the ipad so that I could reinstall it, which resulted in the 3rd problem.
3- I cannot delete any apps. I can get all of the icons to shake and the small x IS available, but everything freezes when I click it. I can't do anything at that point except reset the ipad or wait until it eventually restarts itself. I've tried this with Pages as well as multiple other apps, all with the same result. I've also tried downloading a new app (which worked fine) and then deleting that one, but I got the same result.
3a- A small related issue to this that I am far less concerned about is that when the ipad restarts itself, it comes back on and the screen is really dark and I can barely make out what appears on the screen. If I enter my password right away, it stays that way until I go into Settings - Brightness & Wallpaper and touch the brightness setting (although I'm not actually changing the setting because it already shows that the brightness is turned up a little over halfway). If I don't enter my password right away and let it go completely dark, then click the home button, the brightness is fine.
So now I'm stuck. My guess is that I will need to restore it, but wanted to check before I take that step. Unfortunately, my laptop is on its deathbed so I haven't been synching my ipad to it and I fear my Numbers documents are gone forever. I'd like to try everything I can to fix these issues before doing the restore in hopes that I can get the Numbers documents back.
Any suggestions for any or all of these problems?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Mac Mini and DVI-Video PAL Adapter no picture

Hello,
I have a mac mini g4 (late 2005) and the pal video-adapter to connect this thing to my tv however I don't get a picture out of this on the tv. In the system preferences I don't have the choice to a pal setting but just 800x600 in different colors and 1024x768.
When the mac boots with tv connected (s-video cable) I see some flickering but nothing comes out of it.
Any hints how to proceed here?
konstantin

After rebooting the mac mini with a vga-monitor connected, then unplugging that monitor and plugging in the tv adapter it is working.
If somebody could shed some light, what has happened there I would really be interested..
Konstantin

S20 and Marvell 88SE63xx/64 Adapter issues....

Similar Messages

Maybe you are looking for