S205 Batterry/Charge Indicator?

Hi. I just got a Lenovo S205 but I still can't figure out when the battery is fully charged (when laptop is off). I always turn it on to check if it's already charged or not. I have had other laptops where battery/charge indicators go red while charging and green when fully charged. How do I know when my Lenovo's battery is full or not?

Hi and welcome,
only the indicator coulour & behaviour keep you informed , when your ideapad is off and/or have closed lid.
Battery status indicator led
Blinking amber half second off/ one second on The remaining power of the battery is less than 5% of its capacity
Blinking amber short off long on The battery is being charged with remaining power between 5% & 20% of its capacity
             amber operates on battery power with remaining power between 5% & 20% of its capacity
Blinking white battery is being charged with remaining power between 20% & 80% of its capacity
             white when plugged in status, remaining power of the battery is more than 80% of its capacity, or when on battery status, remaining power between 20% & 80% of its capacity fully charged
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

  • Iphone 4 is not recognized by itunes, will not sync, charge indicator icon does not come on when hooked to usb charger

    When I hook my iphone 4 up to itunes, it does not show up on the left. It will not sync, and the lightning bolt charging indicator on the phone does not come on although it appears to be charging over time because the battery level has increasd.
    I am running Mac OS X, up to date as is my iTunes. I tried the steps from the website troubleshooting guide and nothing worked.

    Additionally, charging through other devices such as my car charger has the same symptoms.

  • PO free of charge indicator table

    Hi all,
    can someone telll me which table stores the free of charge indicator in PO?
    Thanks!

    Hi,
    Check the field variant assign to document type in Spro->MM->Purchasing->PO->Define Document Types
    Check the field status of the field Free item indicator for that variant in
    Spro->MM->Purchasing->PO->Define Screen Layout at Document Level

  • Where "Dependent Items Are Free of Charge" indicator from PO stored?

    Hi,
    Where "Dependent Items Are Free of Charge" indicator from PO stored. In ME23N transaction it is displaying k=like :
    Data Element UMSON
    Screen Field MEPO1211-UMSON
    But in which database table this will be stored....Please let me know if any has idea...
    Thanks
    Venkatesh P

    Oh My mistake...
    It is in field /BEV1/NEDEPFREE...and table is EKPO in tcode SE16...
    Pls check..
    Regards
    Priyanka.P

  • Battery Charging Indicator Light Is Out

    I own a tangerine iBook, OS X 10.4 operating system.
    For a year or so charging the battery while the power cord in has been a "fussy" project -- sometimes it wouldn't charge until I moved the "plug-in-to-the-computer" end of the cord out ever so slightly. I bought a new power cord, but that didn't change things.
    I don't have internet at hom, so most days I take my laptop and power cord to the public library and use the library's WiFi to look for work. Yesterday I came home, plugged in the power cord, and no battery charging light. I "jiggled" the cord, got out the old power cord and tried that one, then I tried a different electrical outlet. No battery charging indicator light, and the battery is discharging while I use it with the power cord.
    I'm assuming this is an electrical problem that I can't fix, but can anyone fix it? When the battery runs out, will the iBook keep running when plugged into an electircal outlet, or is the electricity not getting to where it need to be?
    I've had problems with the battery not charging before, and once I was advised to reset something, but I've alway had the indicator light on, so now I don't know if power is getting to my computer.
    I went to About This Computer, clicked on Power and saw this:
    AC Charger Information:
      AC Charger (Watts):    0
      Connected:    No
      Charging:    No
    which looks like it doesn't think I'm connected to any power source.

    Yes, if resetting the PMU doesn't work, it does sound like the DC-in board has failed.
    It is not an easy repair (especially for someone who describes herself as "NonTech."
    http://www.ifixit.com/Guide/Installing-iBook-G3-Clamshell-DC-In-Board/114/1
    Not exactly cheap, either:
    http://www.ifixit.com/iBook-Parts/iBook-Clamshell-DC-In-Board/IF149-023?utm_medi um=frame_module_bottom&utm_term=ibook_g3_clamshell&utm_source=ifixit_guide&utm_c ontent=related_products

  • Is there any way to keep the charge indicator bar onscreen in the lock screen in IOS7? And can I keep the call in progress screen up instead of going to wallpaper while a call is dialing?

    IOS6 had a charge indicator bar on the lock screen that allowed me to see at a gance how much charge I had. Now it only flashes onscreen when I first connect the charger for about 1-2 seconds. I know the icon in the top right shows percentage, but it is too small to get an accurate look.
    Also, when a call is in the progress of dialing my phone just shows the wall paper instead of the whole call control screen. I can hit the home button then hit the return to call bar at the top of the screen to get the control screen, but that is annoying to say the least. If I accidentally dial a number while navigating my contacts or one of the apps it takes several steps to cancell the call before completion.
    I know my wallpaper may be pretty, but I don't need to see it while trying to use the phone instead of having control of the phone or seeing desired information (charge indicator).

    I have a similar issue. Sound works okay but keep getting the app not optimized, you may experience a decrease in celluar strength. Verizon says it is a software issue. Apple says it is a hardware. Phone will niot synch to itunes to do any kind of reset.

  • Charging indicator on Macbook air 11'

    Good day!
    I bought a MacBook Air 2010 11'.
    Turn off a fully charged (charging indicator: 100%), immediately after turning on the next day, the charge indicator is 98%. On the other notebooks I had ever seen! Is this normal?

    Sounds very normal to me...
    Sly

  • Charge indicator won't go away

    When I eject+unplug my iPod Video 30gb from my computer or take it out of my dock, it still says its plugged in. When I turn off, there is an icon in center that says "Charged" even though its not plugged in. Reset + restore a no-go. I'm afraid that this will drain my battery!

    Folks,
    Thanks for your responses and I humbly apologize for my own confusion.  Apple Chat Tech Support also felt this was a bug and will inform me of any remedies on this.
    There are others reporting the same thing and as everyone here is reporting, it is normal to have the charge indicator remain.
    My ipad was still on ios6 (my stupid bad).  with ios 7, the charge indicator still remains after 100% charge.
    I will go ahead and close this and appreciate everyone's time in confirming this is normal.
    With that said, many are suggesting this lightning bolt go away when fully charged so that (for those that don't display the x% ) will know when the battery is fully charged and not have to guess.
    Thanks again!

  • Why is the battery charger indicator white

    why is the battery charger indicator white
    I am unable to send text messages

    You're welcome.
    You're not an idiot, as the only dumb questions are those not asked .

  • Z30 sometimes doesn't charge, charging indicator behaving erratically

    I have had a Z30 for 2 months now, and from the start it had the following problems:
    - Charging indicator visible even though charger not connected
    - Charging indicator not visible when charger is connected
      - In this case, sometimes the Z30 would charge, sometimes it wouldn't - visible only after some time (battery charge level going up or down)
    - Occasionally not charging at all, whatever I do (using original BB charger). Only phone restart reliably helps in this case, but only for a day or so.
    - "Device monitor" consistently doesn't show anything for battery, CPU, or memory (RAM) usage, i.e. nothing about operational staus of the device. Applications loaded to flash memory are the only items shown.
    This has become more of a problem lately. Especially the fact that I can't tell if the Z30 is charging is really annoying - when I connect the phone to a charger before going to bed, I want / need a phone that is fully charged the next morning. With my Z30 it is hit and miss.
    Any suggestions ?
    Thanks

    So, to clarify for me...
    When your Z30 is connected to the OEM wall outlet charger, you do not see on the screen the small upper left yellow charging symbol (electrical/lightning icon)?
    When your Z30 is DISconnected from that charger, that yellow charging symbol appears?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to create Charge indicator for Bank account

    Dear SAP Gurus,
    Please advice how to create charge indicator for bank account under - Set Up Bank Determination for Payment Transactions - activity in automatic outgoing payment configuration.
    There is no customizing option in F1 help option. I also try to search in IMG there is also no link for the same.
    Early reply would be appreciated.
    Regards,
    Prafful Kansal
    9910432881

    Dear,
    Charge Indicator is freely definable field, you can put any value you want.....
    Regards
    Chintan Joshi

  • Why doesn't my battery charging indicator shown during charging?

    Hoping somebody can help. Ever since the install of IOS 6 when I plug in my iPad I hear the sound the when the attempt to charge is recognized. It the indicator no longer shows on the screen.
    Thx

    The charging indicator shows on my iPad running iOS 6.
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • Why does the charge indicator never go away in iOS 7???

    I think it is a HORRIBLE design in iOS 7! The charging icon NEVER goes out, even if your phone is completely charged!

    I guess it's now a "connected to power" indicator instead of a "charging" indicator. I just look at the percent and how full the battery icon looks.

  • Nano always displaying charge indicator even when not plugged in!

    Following a recent charge, the nano is permantently displaying the charging indicator whether I have it plugged in or not. This means that even when disconnected and switched off, it shows the symbol and runs down the battery - meaning I have to keep it charging all the time when not in use!
    I have had the nano working fine for several months - strange that it's started doing this...
    Anyone else had this problem?

    mine has started to do the same thing. I have reset the nano 3 times. When I turn it off the "charged battery" icon stays on though the light is off. I plugged it in to the computer and had to reset for the computer to find. After leaving it plugged in for a few hours I unplugged and tried again. Still says "charged" all the time.
    I could try a hard reset...., but has any one else experienced this?
    rob

  • Thinkpad Yoga Charging Indicator

    Hello,
    where can I find the charging indicator on the Thinkpad Yoga? When I'm charging the machine (turned off) I don't see any light or other charging indicator. Is this normal?
    Thanks
    Regards
    Rango

    Hi Rango,
    Welcome to Lenovo Community Forums!
    I’m sorry to inform you that Lenovo ThinkPad Yoga doesn’t have a dedicated indicator for charging status.
    The illuminated dots in the ThinkPad logo on the outer lid of your computer and on the palm rest show the system status of your computer:
    • Blinks for three times: The computer is initially connected to the power.
    • On: The computer is on (in normal mode).
    • Off: The computer is off or in hibernation mode.
    • Blinks fast: The computer is entering sleep or hibernation mode.
    • Blinks slowly: The computer is in sleep mode.
    Hope this clarified your query!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Flash plug-in crashes Isight camera

    Hello everyone. So basically, i use stickam to stay in contact with far away family members.  Ive been using it without any problems for.....basically ever!  After the new Mac os update when i go to "allow" my isight camera the flash plug in crashes

  • File a complaint, poor customer service

    I have been a loyal customer with Verizon since before 2005. I have two wireless plans with seven phones, home phone, dsl, two business line and Verizon will not take care of my service correctly. I am very disappointed. In July 2011, I purchased two

  • How to collect records using BPM

    Hi All, i have a req that i need to collect records in chunks and want collect using BPM want make their single file. i have 10 fields in one table for that i have made one datatype ,i want to collect 1lac recods 5 times in BPM and want make a single

  • Cisco 3850 Mobility Agent unable to connect clients

    Hi We are trying to use Cisco 3850 as Mobility agents with 5760. We can't seem to get the clients to authenticate to the radius server. We don't even see them appear in the radius logs. We have defined the radius server and the profile wlan Wireless

  • Trying to find and install bootcamp

    i tried installing it when it first came out but could get my hands on a windows xp disc until now :/ im still working off my mac mini with mac tiger, os x 10.4.11. I found http://www.soft32.com/download_200398.html but when i download it and open th